IP address conflict: this is the system event log: ___The ICS_IPV6 failed to configure IPv6 stack. _ < the provider name = Guid "Microsoft-Windows-SharedAccess_NAT" = "{A6F32731-9A38-4159-A220-3D9B7FC5FE5D}" EventSourceName = "ipnathlp" / > _

Similar Questions

• Which means "the ICS_IPV6 failed to configure IPv6 stack" and what should I do?

  This error message appears repeatedly in Event Viewer.  I have read several posts on this subject but have not seen a clear explanation of what this means and what I have to do.  Proposed solutions will reconfigure the router and the computer to disable IPv6.

  Please explain in English clearly enough what this message means and advise what I need to do.

  Thank you.

  Cathy

  Oops,

  Sorry, got your errors.zip mixed with another of the same. None of the Avast / Norton

  or Bug_Check 51 applies to you (I change that).

  Just update the network drivers, and if the error is still present in EventViewer you can ignore it.

  Rob - SpiritX

• IP address conflict? How to solve this problem. Message on the screen. go to the system event log window.

  Next message on the screen for IP address conflict. There are two addresses. How to solve this problem. Message to say go to the system event log window. I can't. Pl help.

  A common situation that can lead to a conflict of ip address, it's only 2 (or more) computers or other devices are connected to the router (via ethernet or wireless), and both have ip addresses assigned by the router automatically, one of the computers, then past in mode 'sleep', and while we sleep the router restarts.  When the router comes back online he doesn't know the computer sleeps is here and that he already has an assigned ip address and so it gives the ip address of the other computer.  When the computer asleep wakes duplicate error will be triggered.  It can be solved by turning off computers and turn it back on so that the router will assign them new ip addresses.  If this is not what is happening in your situation, the following may help: http://windows.microsoft.com/en-US/windows7/Get-help-with-There-is-an-IP-address-conflict-message

• You try to start a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a non-Microsoft service, contact the service provider

  Ideas:

  • You have problems with programs
  • ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi sanjeevkode,

  Thank you for visiting the website of Microsoft Windows Vista Community.  As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.

  VMware communities: http://communities.vmware.com/home.jspa

  In the meantime I suggest you try these options / methods

  IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.

  Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start

  Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID

  Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you

  Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.

  The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Whenever I boot Windows XP Professional I get the message: error 7026 system event log

  Original title: 7026 event log system error

  Get an error in the error 7026 system event log the following boot-stat or system-stat driver could not load DCDisk.  I get this log entry each I boot XP Pro.  It doesn't seem to be the cause of failure, other than the log entry.  The only app that has a dcdisk.exe I can find is Farstone I installed on the system

  Uninstall and reinstall the program that you have installed that has created the entry

  http://consolecopyworld.com/DC/dc_utils.shtml

  Alternatively, you can remove the redundant entry using Autoruns.

  To identify what loads when you start using Autoruns (freeware from Microsoft).

  http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/Autoruns.mspx

  With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.

  Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

• How to write to the system event log

  Windows 7 Home Premium 64-bit Service Pack 1

  I run a daily work to create an image of my drive system hard. Repeatedly the work began and, due to a material error, be abandoned. In some cases (mostly), this will result in the image of yesterday being destroyed, leaving me with no viable image in case I need to restore. Although the reader is old enough (3 years), I'm not want to replace it, because I know no other activity that has had a problem with it and diagnoses reported no problem.

  So I want to execute a batch file or a script before the regular daily system backup operation. The script would go to a SMART short self-test, and if no errors are reported, would signal the backup task to run. Conversely, if the self-test report any error, the script don't trigger not the backup task to run. I think I will need to write an entry in a kind of system event log, which would be defined in the trigger condition in the entrance to the Windows Task Scheduler for the backup task. If anyone can help with the details of how to write an entry to a log of system events?

  Or, perhaps, there is better way to achieve what I want to do?

  I guess that there is not a very high probability that the script will always truly detect a problem and prevent the last image of the destruction. But I tell myself that it is worth the effort.

  TIA

  Assuming that smartctl generates an errorlevel nonzero in case it failed, the following script will work, as long as Smartctl is run under the same account as Casper.

  I also made your script more transparent control setting. The if/then/else/if/then embedded instructions are perfect for computers, but are often misconstructed by the human mind. I'm a big believer in the KISS principle.

  OFF @echo
  FOR %%d Ko (% Date %) Today SET = %% A

  SET now = time %
  echo =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.
  ECHO% now %%d now %%d %2
  echo"=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.
  Si (« %3 « == » »
  echo of the provided insufficient parameters
  output/b 1
  )

  IF/i %1 is goto short Action
  IF/i %1 is goto long Action
  ECHO 1 Parm [%1] is INVALID
  output/b 1

  : Action
  smartctl t %1 %2
  the echo of SECONDS to WAIT for selftest %3
  choice/n/t %3/d N
  smartctl-l selftest %2%

  Set Flag="%temp%\Smartctl.log".
  If exist % del % % flag flag
  If %ERRORLEVEL% is 0 echo. > Flag %

  For the handshake to work, you must place the CASPER command inside a file of commands as follows:

  off @echo

  If exist c:\Casper\Casper.exe '% temp%\Smartctl.log '.

• Where is the discover log and system event log in windows server2000?

  Hi all:
  Where is the discover log and system event log in windows server2000?
  
  
  
  
  
  
  Concerning
  Terry

  Hi Terry;

  Please check:

  http://download.Oracle.com/docs/HTML/B13918_03/tshoot.htm#i1028801< section="" section="" d.2.5,="" "how="" to="" enable="" the="" discoverer="" services="" log="">

  For the event log system;

  Control Panel > administrative tools > computer management > system tools > Event Viewer

  Respect of
  HELIOS

• 8 Windows system event log, now what?

  Hello

  Here is my (compressed) system event log, so how can I fix or should I worry about the MISTAKES listed?

  Is there any other information you need? I downloaded the file zipped to my drop box, that ' E-mail address I should share it with?

  Thanks for your help...

  Alton J Drummond Jr

  "Jazz player Da".

  Almost every PC I've seen show at least a few errors in the paper at some point and if the system itself to show no symptoms of problems can generally be ignored. An error can be generated, and then the software reset and succeed the task but the error is already in the paper.

  For the majority of users, the event log should be used at the same time to investigate the real issues and not otherwise referred to as.

• Part of the box reception of Microsoft, windows, msn or other co. ?

  Part of the box reception of Microsoft, windows, msn or other co. ?

  Hello

  There's an InBox.com which is a totally separate Microsoft courier company.

  Or do you have average and the Inbox in your e-mail access?

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I lost my laptop screen after trying to set my display properties. I get the Dell logo and Microsoft Windows XP, then a blue black screen... but I can hear loader behind it. What gives?

  I lost my laptop screen after trying to set my display properties. I reformatted recently, everything seemed to work, I loaded SP2 who gave me the poor quality screen while trying to fix it. Now, I get the Dell logo and Microsoft Windows XP, then a blue black screen... but I can hear loader behind it.  What gives?

  "Ineedafix" wrote in message News: * e-mail address is removed from the privacy * .com...

  I lost my laptop screen after trying to set my display properties. I reformatted recently, everything seemed to work, I loaded SP2 who gave me the poor quality screen while trying to fix it. Now, I get the Dell logo and Microsoft Windows XP, then a blue black screen... but I can hear loader behind it.  What gives?

  Start the computer in safe mode (press F8 continuously immediately after power and don't worry beeps when you press the button) and let it boot without a network.  Once there right click on the desktop and then click Properties.  Click settings and the value of the monitor mode (640 X 480) VGA or SVGA (800 X 600).  Accept the changes and restart the computer.  You should have a mediocre screen, but you should see it now.  Download and install the appropriate drivers for your video card in the laptop to the web site of the manufacturer of the laptop.  Install the drivers and then you should be able to set the display of the laptop to the correct native resolution for your computer monitor (must be in the documentation of the laptop).

• During ANY installation of a program (e.g. Skype), I get the "year error occurred while attempting to create the directory C:\Program\Microsoft\Windows\Start Menu.

  original title: facilities program

  During ANY installation of a program (e.g. Skype), I get the "year error occurred while attempting to create the directory C:\Program\Microsoft\Windows\Start Menu. What happened with cd installs, but also downloads on the internet.  I already "took possession" of the computer, which is still delayed freaking, but am still unable to fight through all the questions of security, I guess that.  Any help would be greatly appreciated as I'm about to DOWNGRADE to something more user-friendly.  Thank you

  BTW, this is WINDOWS 7 Home Premium

  I had this problem for a long time on Windows 7. Finally, by pure chance I came across this solution that solved the problem. -Take the shortcut of the property

  http://www.SevenForums.com/tutorials/1911-take-ownership-shortcut.html

  You will need to run the "fusion" in the context menu of a reg file, published as part of the solution to change some registry settings. On any folder, you'll get a context menu 'Take Ownership' which restores the property correctly. This solves a lot of problems installing.

  Many people have trouble with this and therefore decided to post here.

  Gem of a solution. Thanks to GRIM and Brink on Windows 7 Forum!

  -Jayawanth

• Secure boot requires firmware which supports UEFI followed the v2.3.1 Errata B and has the authority of Certification Microsoft Windows in the base of signatures UEFI

  What does that mean? I want to upgrade to Windows 8 and it's what came when I bought the program online "secure boot requires firmware which supports UEFI followed v2.3.1 Errata B and has the authority of Certification Microsoft Windows in the UEFI signatures database... Thøis means that my laptop is not compatible? is there something I can do to fix it so I can get windows 8?

  Secure boot is a protocol feature not a Windows 8 of UEFI recent incidents made of PC/Laptop, etc. This is a feature implemented in the BIOS of a PC/laptop.

  Old PC do not have this in the setup of the BIOS, so it cannot be used.

  You have been informed that Secure Boot is not part of the BIOS, you may not use the feature.

  No have Secure Boot will not in any way affect the installation / execution of the W8.

  Here's a technical explanation of Secure Boot, read if you like:

  http://blogs.msdn.com/b/B8/archive/2011/09/22/protecting-the-pre-OS-environment-with-UEFI.aspx

  My own PC (4) have no function and use W8 (evaluation version of various) for more than 12 months, even once is not a problem.

• How to fix the error in the windows system event log

  How to diagnose in the event log error... pls help.

  Here are some notes on the event viewer reports that can help you. When you have a lot of mistakes, you need to focus on system errors and warnings, even if it's the applications that are giving you grief. Problems with the first sorting system can do the easier application problems. Note the time that the computer is started last and deal first with those at the beginning of the boot. Correct previous errors can be solved later.

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Click the button copy on the general tab allows you to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• WHEA-Logger 17 error in the system event log

  I would like clarification on the specific error that is listed in my system with high frequency event log; I don't know if it is a hardware or software problem.

  My system specs are:

  Windows 7 64 bit
  Motherboard ASRock X 58 extreme LGA 1366 Intel X 58 ATX Intel
  SAPPHIRE Vapor - X 100269-2GVXL Radeon HD 4890 2 GB 256 - bit GDDR5 PCI Express 2.0 x 16 HDCP Ready CrossFire
  Western Digital Caviar Black WD1001FALS 1 TB 7200 RPM / MIN SATA 3.0 Gb/s 3.5 "internal hard drives
  PLEXTOR 24 X DVD/CD Writer black SATA model PX-880SA LightScribe Support
  Crucial 6 GB (3 x 2 GB) 240 - Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Triple Channel Desktop memory Kit
  Intel Core i7 920 Nehalem 2.66GHz LGA 1366 130W Quad-Core Processor Model BX80601920

  I've updated the BIOS with the latest version, 1.40, and have the latest Intel Chipset drivers.
  Measures to take for troubleshooting:

  (1) uninstalled and reinstalled drivers Chipset Intel
  (2) uninstalled and reinstalled the ATI drivers
  (3) Ran Memtest and can't find any errors
  (4) update BIOS
  (5) reinstall the ATI video card
  (6) uninstalled and reinstalled 0 x 8086: 0x340a in Device Manager
  (7) searched the forums and cannot find a solution.

  Description:
  A corrected hardware error occurred.

  Component: PCI Express Root Port
  Source of the error: Advanced Error Reporting (PCI Express)

  Bus: Device: function: 0 x 0:3:0 x 0 x 0
  Vendor ID: Device ID: 0 x 8086: 0x340a
  Class code: 0 x 30400

  Any suggestions as to the cause of the warning and the solution would be greatly appreciated.

  I think that you should make no decision until after 22nt Oct. No one wants to "Miss the bus." Your hardware manufacturer will attempt to get on the same page.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Your mail is sent to another email address. This is the message I see when I connect to my Hotmail.

  POP problem.

  Your mail is sent to another email address. To stop the transfer of your mail, go to Options. This message appears everytime I open my hotmail id. My id is - * address email is removed from the privacy * . What to do to remove this also email identification which was related to the import has been deleted, I would also like to remove the POP folder in the account that is being displayed. Please help me I'm getting bored.

  Hello

  The question you have posted is related to hotmail so that it would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the best support.

  http://www.windowslivehelp.com/product.aspx?ProductID=1

  http://www.windowslivehelp.com/