iPad high reading after repair

I wore an iPad Mini flea market today, and the seller told me that he had the screen replaced as the original was cracked. There are also clear signs of an incident to drop as there is very little dents in two corners on the top of the iPad. I took a glance at the screen, and it seemed to be "lifting" very slightly from the window down to the bottom (cosmetic). After watching this, I took my iPad down to a local phone repair shop and they used adhesive to fix the lifting of the screen. I had the iPad home, and he began to play up ("home" button doesn't work do not, Siri launching unexpectedly, multitasking comes not not up to what double tap Home button ect). I did a factory reset and kept the same past. I also tried to disable Siri in settings and using support touch button instead of the home. When I placed the iPad down on my desk, the screen also turned on randomly. I then left the iPad for a while and when I picked it back again, it seemed to work as expected (except for the home button). I will try to reinstall the software via iTunes and see if that helps; because I think it could have been a glitch in the software that caused the iPad for it. What are your thoughts?

ldale7 wrote:

.. What are your thoughts?

Hello

I suggest that you try to send back the iPad for a refund, unless she has been described to you as being faulty (instead of having only the apparent defects) when you bought it.

However, as you have since the work on the iPad by a third party, the seller may seek to claim that the defect was caused by that.

Tags: iPad

Similar Questions

  • Impossible to install Acrobat Reader after returning from 10 Windows to Windows 7

    Hi, I tried all kinds of solutions to reinstall Acrobat Reader after you have reinstalled Windows seven. I get a message saying that the AcroRead.msi path is not available. I tried to use the cleaning tool and remove the Data/Adobe/Setup program and full of numbers, but it comes back!

    Help please!

    Hi and thanks for your response. I finally found a solution for download Winfix and to regulate the installation and uninstallation problem.

    The message that I continued to receive was the path to AcroRead.msi wasn't available.

    THX.

    Sent from my iPad

  • IPad 2 Air after update to iOS10 wifi turns off automatically.

    IPad 2 Air after update to iOS10 wifi turns off automatically.

    Hello. Could you please identify your router? Also try to describe a little more when it stops, and you can reconnect after that.

  • Siri on iPad 2 Air after updating IOS 10

    Hello

    on my Ipad 2 Air after upgrade IOS 10.0.1 I have no option to change the voice of Siri in the male. The voice is that of the IOS 9.3.5. I did a complete reset, but nothing has changed. Is this normal?

    What language you have selected for Siri? With selected English, I get a 'Siri voice' setting that lets me select different English accents and male and female voices

  • Can I use speech on an iPad to read the text aloud?

    I use the reading list in Safari on my iPad to read my news. I use a treadmill for exercise. I would use speech on an iPad to read my News aloud while using my treadmill. Is this possible?

    Try the settings > general > accessibility > speech > talking about screen. However, I believe that you would allow this, when you go to each new screen.

    I think that there are applications that offer this feature, but I have never used one and don't know what to recommend.

    http://AppAdvice.com/AppGuides/show/text-to-speech-apps-for-iPad

  • I got an ipad 2, but after the ios 9.3.3 it does not load

    I got an ipad 2 but after that I updated ios 9.3.3 does not charge... What can I do?

    Let the iPad charge for at least half an hour and if it does not seem to be supported, see the following article for the troubleshooting steps. If your iPhone, iPad or iPod touch won't charge - Apple Support

    -AJ

  • Automatically Mark message as read after reading

    Initially by email worked correctly, but somehow I failed and may not know how to reset the e-mail to mark "read" AFTER that I read it.

    Review your settings in OPTIONS - DISPLAY - ADVANCED.

  • Firefox crashes 2 seconds after the start. This happened after repair upgrade to Windows 7

    After repair, update Firefox (9.0) will not work. I finally uninstalled and reinstalled without success. Following your directions of support I tried to delete my profile with partial success with a new Firefox profile would be run once and then back to an apparent after 2 seconds accident (as seen in Task Manager). After each new profile he followed the same routine of work once. Any help would be appreciated.

    Try a "clean reinstall" Firefox by removing the Mozilla Firefox installation directory before you reinstall, as explained in these articles:

    If Firefox still crashes after a clean reinstall, try the suggestions in the article Firefox crashes - help out, prevent and get help fixing accidents here and, if possible, after a crash report ID, as explained later in this article.

  • IBooks on ipad pro crash after IOS updated with 9.3.1.please

    IBooks on ipad pro crash after IOS updated with 9.3.1.please

    I have the same problem after update 9.3 OS on my Ipad 2... Crashing in IBooks. PDF and missing books. I have access to my books for about a minute before it crashed.

    It still occurs with the 9.3.1 update.

    I don't really know where to go then except put it there the 9.3.1 upgrade did not fix my problem.

    Thinking that I might have to consider for an Apple Tech which is an expense I really don't think I should have to bear, because I did not cause the problem that everything worked fine with my iBook before upgrading the OS 9.3.

    Thank you

  • I bought ipad air 1 after that 2013 but can not get the pages for free. Numbers and imovie I can. IOS9 running at the moment. I have pages when I connect on icloud on my pc. Can I transfer iPad app, because it is not in the ILO purchased in itunes.

    Hi everyone, this is my first post, also help on the post would be appreciated.

    I bought ipad air 1 after that 2013 but can not get the pages for free. Numbers and imovie I can. IOS9 running at the moment. I have pages when I connect on icloud on my pc. Can I transfer iPad app, because it is not in the ILO purchased in itunes.

    Thanks in advance

    Newbie

    The only way to install an ipad app is through the app store.  PC or Mac software does not run on the ipad.  Search in the contacts link at the bottom right of this page.  Give apple a call.

    I guess is the icon for pages in icloud for storing documents pages.  At the same time, apple had a cloud based pages.  Not sure what happened to her.

    R

  • the goal even after repair

    I recently bought a refurbished rebel t5 with the kit lens 18-55mm, as well as the 10-18 mm IS and 55-250 IS lens. Everything has been fine with all my equipment except for the 18-55 mm lens. When the rotation of the lens to zoom in or out, there was a notieable rubbing or grinding noise and there were a few sticking points where the goal was not spin smoothly. I took in a Canon customer service center and they we sent for repair. I am the home goal today and everything is exactly the same thing when I sent it. Same grinding noise, even the sticking points. The service details, bak I say "your product has been examinded and it was found that the party was out of position, causing noises occur. The part of the description says "Focusing ASSY YG2-2353-000 part number".

    I have also two older lenses that I had with the original Canon EOS rebel, I have a 18-55 and 75-300. So none of my other 4 lenses have this problem, but I don't know how many questions it's really. This could potentially damage the lens over time? Or is that what I should really worry? It isn't really the effect on my shot, but I don't want to be slowly causing damage every time that I have to zoom in or out. Since he was sent back to me like that after repair, should I just assume that it is not a big deal, because the repair obiously Center don't think it was if they sent back like that?

    Thanks for any comments,

    Matt

    Matt,

    I don't have this particular goal, but I've been involved with a lot of people what to do. «It is not really effect my shooting,...» ", seems to be like that.  The lens can jump gear fairly easily. You can reset it by deleting and expanding the focus and zoom all the way, both ways.  You can hear a few clicks.  Be gentle.  It's really not a good candidate for the repair, if it is under warranty.

    Using it, he can't last forever or not. If not, buy the new improved version. The Canon EF - S 18-55mm f/3.5-5.6 IS lens STM or elsewhere, far, the best choice for Canon EF - S 17-55mm f/2.8 IS USM Lens.

  • After repaired Windows XP Prof on my HP computer with OEM license while trying to connect to his request activate windows with option or NOT, although I have to say yes or no its loging off drving not me to the main Windows screen

    After repaired Windows XP Prof on my HP computer with OEM license while trying to connect to his request activate windows with option or NOT, although I have to say yes or no its loging off drving not me to the main Windows screen... How do I activate windows or how can I connect windows. Once I login I can activate as I have OEM license... Pls advice

    Activation of Microsoft Hotline - (888) 571-2048 MS - MVP - Elephant Boy computers - don't panic!

  • Says Lightroom serial number entered is not valid after repair of the system occurred, require disabling series in order to reactivate the same computer

    Says Lightroom serial number entered is not valid after repair of the system occurred, require disabling series in order to reactivate the same computer

    Can you please send me the serial number, you have a private message ?

  • POST show different screens and no customization after repair?

    Hey guys,.

    I have an Alienware Laptop, 17 and it was recently repaired. Before it was repaired the POST was really clean. He showed the alienware without progress bar and then booted Windows logo.

    Now, after repair, it first shows a black screen, then a list of recognized drives and watch then the logo alienware with a red progress bar. Also, the 8 Windows loading screen is resized as if the resolution is lower.

    Computer model Alienware 17
    BIOS Editor Alienware
    BIOS version A14
    Date of the BIOS 24/09/2014
    OS version Microsoft Windows 8.1 Pro

    This is the current configuration of my computer. I watched several times in "F2" (BIOS) for an option of 'silent start-up' or something else, but can't find it. What has changed?

    In the BIOS, select UEFI and secure boot. Try this. Which removes the progress bar.

  • Qosmio X 70-A-10N issues after repair service

    I am a customer of toshiba in the long term and for the first time that I need to complain about something.

    I bought a toshiba Qosmio X 70-A-10n to 10.11.2014 in Serbia

    I asked to insert an ssd and install windows on it, I got it on the hard drive.
    Not a problem, I know do that staff.

    After less than a week its display starts showing the wrong colors, I tried to register on your website, it says that it is already international.

    After that I discovered on your official site for guarantees that its security began September 27, 2013.
    More than a year before I bought it.

    And I brought to the official service, where thay couldn't answer all my questions.

    But they have changed the screen, in term of 4 weeks and f * ed up a bunch of other things. Formatted a hard drive with a recovery of files, screched on a lot of places, and beside the touchpad when I put my hand while typeing it says tip tap, tup, or other noises iritating.

    Hi Aleks

    I guess that the laptop was repaired by service provider authorized in your country.

    Is that each cell will be set to before the repaired unit factory settings would be sent to the client. This was also the case even with my laptop.

    The ASP will always install the pre-configured Toshiba system in order to check the functionality.
    That's why he of STILL and highly recommended to back up data and personal files before you send the unit for fixing.

    With regard to the question of the touchpad:
    I'm not quite sure about that m noise but I imagine that this is linked to the touchpad setting that is located in Control Panel-> mouse-> last tab (here click on the button of setting or properties)

Maybe you are looking for