iPhone 5 with Canadian SIM a battery life short when in the USA

Similar Questions

• Is it true that only charge your iphone at 100% can shorten its battery life?

  Because some say it may decrease the battery life if you always or often recharge your iphone to 100%. They said that it is better not to load it 100%, and some have said it's ok to charge your phone to 100%.

  your phone/ipad/computer laptop/ipod is designed to be loaded until it reaches capacity. That's what it is designed by engineers. Then no. Tell the 'they' who says 'it is better do not reach' 04:20 occurs only twice a day and they have to keep it up to two times per day to book all the cells of the brain are left in hiding.

• Classic BlackBerry Battery Life reduced considerably since the last update

  Hi all

  did anyone face any problem of battery for Blackberry Classic - for me with 3 G or Wifi connection battery becomes low, very fast.

  GaryR40 wrote:

  I have the same problem - phone overheating and battery life has fallen to about 8 hours with a very light use. I have disabled everything I can, but it is still rubbish. The phone is only three months old and has quickly become unusable. All solutions?

  Did you update on your device? Have you running apps? Maybe bad signal in your area? There are many things that can cause your BB to fire

• BlackBerry Q10 Q10 - the battery life low, overheating, restarting the device.

  Hello

  My camera has been upgraded to 10.3 towards the end of February, I think.  Battery life was low at first, but eventually improved to an acceptable level.  (Acceptable = able to make it through the day without charge.)

  In recent days, the battery life was horrible.  At 01:00 this morning, it was fully charged and from 05:00, it's about 40%, without any use at all.  All idling with the screen off.

  I read some suggestions in the forums.  I deleted all my email accounts, restarted the unit, then added them.  I also confirmed that there are no other applications running that might be draining the battery.

  I bought the unit directly from BlackBerry back to November, so I have no support available carrier.

  So sometimes after typing a message, I hung up and he begins to restart.  I'm quite sure physical were issued with the phone - it is never dropped or roughed up somehow.

  When I look at my use of the battery, I see the remaining 38%.  System of 26%, and PIM services is 8.6%.

  Someone more detailed suggestions on how to fix this?

  Bryan.

  Hello and welcome to the BlackBerry support fourms!

  Try to veiw of the last 12 hours of the CPU usage. The heat is probably high CPU load.

  I also recommend that you recharge the device through BlackBerry link software. Good luck and keep me posted.

• Battery life after upgrade of the El Capitan is very bad

  Since the upgrade to El Capitan, it seems that my battery drains quite quickly.  Here is my EtreCheck report.  Please advise on what I need to do to get back to normal.  Thank you

  EtreCheck version: 2.6.6 (226)

  Report generated on 05/01/16 15:03

  Time 03:14

  Download EtreCheck from http://etrecheck.com

  Click on the links [click for support] to help with non-Apple products.

  Click on the links [click for more details] for more information on this line.

  Hardware Information: (Does that mean?)

  MacBook (13 inch, late 2009)

  [Click for plug technique]

  [Click here for the User Guide]

  MacBook - model: MacBook6, 1

  1 2.26 GHz Intel Core 2 Duo CPU: 2 strands

  8 GB of RAM expandable

  [Click here for upgrade instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1067 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 1286 - SN = W000881YP9X7A

  Video information: (Does that mean?)

  NVIDIA GeForce 9400M - VRAM: 256 MB

  Color LCD 1280 x 800

  Software: (Does that mean?)

  OS X El Capitan 10.11.2 15 c (50) - time since started: about one day

  Disc information: (Does that mean?)

  TOSHIBA MK2555GSXF disk0: (250,06 GB) (rotation)

  EFI (disk0s1) : 210 MB

  Swope MacBook (disk0s2) /: go-go 249,20 (97.27) free

  HD (disk0s3) [recovery] recovery: 650 MB

  MATSHITADVD-R UJ-898)

  USB information: (Does that mean?)

  Built-in ISight from Apple Inc..

  Apple Inc. Apple keyboard / Trackpad

  Microsoft microsoft¬ae Nano Transceiver v1.0

  Apple Inc. BRCM2070 hub.

  Apple Inc. Bluetooth USB host controller.

  Configuration files: (Does that mean?)

  / etc/sudoers, 1242 but file size expected 2299

  Guardian: (Does that mean?)

  Mac App Store and identified developers

  Kernel extensions: (Does that mean?)

  / Library/Application Support/MacKeeper/AntiVirus.app

  net.kromtech.kext.AVKauth [no charge] (2.3.9 - 10.10 SDK) [click for support]

  net.kromtech.kext.Firewall [no charge] (2.3.9 - 10.10 SDK) [click for support]

  / Library/Application Support/Roxio

  [no charge] com.roxio.TDIXController (1.2) [click for support]

  / System/Library/Extensions

  [no charge] com.leapfrog.driver.LfConnectDriver (1.0.1) [click for support]

  [no charge] com.ragingmenace.driver.SideTrack (1.6) [click for support]

  Launch officers: (Does that mean?)

  [loading] com.google.keystone.agent.plist [click to support]

  Launch demons: (Does that mean?)

  [loading] com.adobe.fpsaud.plist [click to support]

  [operation] com.fitbit.galileod.plist [click to support]

  [loading] com.google.keystone.daemon.plist [click to support]

  [loading] com.leapfrog.connect.shell.plist [click to support]

  [operation] com.mackeeper.AntiVirus.plist [click to support]

  [operation] com.mackeeper.MacKeeper.plugin.AntiTheft.daemon.plist [click to support]

  [loading] com.macpaw.CleanMyMac3.Agent.plist [click to support]

  [operation] com.ragingmenace.SideTrack.Daemon.plist [click to support]

  User launch officers: (Does that mean?)

  [operation] com.mackeeper.MacKeeper.Helper.plist [click to support]

  [loading] com.macpaw.CleanMyMac3.Scheduler.plist [click to support]

  Items in user login: (Does that mean?)

  CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 4.app/Contents/MacOS/CleanMyMac 3 Menu.app)

  Fitbit connect Menubar Helper Application (/ Applications/Fitbit Connect.app/Contents/MacOS/Fitbit Connect Helper.app of the menu bar)

  Other applications: (Does that mean?)

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000006.MemoryKeeper

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000000e.EtreCheck

  [ongoing] com.fitbit.GalileoMenubar.189152

  com.mackeeper.MacKeeper.service.clean [loading]

  [ongoing] com.macpaw.CleanMyMac3.Menu.11232

  net.kromtech.MemoryKeeper.60832 [loading]

  net.kromtech.MemoryKeeper.Launcher [loading]

  Plug-ins Internet: (Does that mean?)

  o1dbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [click for support]

  Unity Web Player: Version: UnityPlayer version 3.4.2f3 - SDK 10.5 [click for support]

  Default browser: Version: 601 - SDK 10.11

  Silverlight: Version: 4.0.50917.0 [click for support]

  FlashPlayer - 10.6: Version: 20.0.0.267 - 10.6 SDK [click for support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 20.0.0.267 - 10.6 SDK [click for support]

  googletalkbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [click for support]

  iPhotoPhotocast: Version: 7.0

  Center photo Plugin: Version: Photo Center Plugin 1.1.2.2 [click for support]

  GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [click for support]

  JavaAppletPlugin: Version: 15.0.1 - 10.11 check the version of the SDK

  User Plug-ins internet: (Does that mean?)

  CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [click to support]

  Safari extensions: (Does that mean?)

  Adblock more

  3rd party preference panes: (Does that mean?)

  Application Enhancer

  Flash Player [click for support]

  SideTrack [click for support]

  Time Machine: (Does that mean?)

  Mobile backups: OFF

  Automatic backup: NON - automatic backup disabled

  Volumes to back up:

  Swope MacBook: Disc size: 249,20 GB disc used: 151,93 GB

  Destinations:

  Backup [Local]

  Total size: 499,76 GB

  Total number of backups: 27

  An older backup: 01/15/13, 23:03

  Last backup: 12/19/15, 03:12

  Size of backup drive: adequate

  Backup size GB 499,76 > (disc 151,93 GB X 3)

  Top of page process CPU: (Does that mean?)

  6% WindowServer

  kernel_task 2%

  0% fontd

  0% CleanMyMac 3 Menu

  0% MemoryKeeper

  Top of page process of memory: (Does that mean?)

  670 MB kernel_task

  442 MB softwareupdated

  Safari of 328 MB

  311 MB AntiVirus

  213 MB com.apple.WebKit.WebContent

  Virtual memory information: (Does that mean?)

  439 MB of free RAM

  7.82 GB used RAM (3.70 GB being cached)

  Used Swap 0 B

  Diagnostic information: (Does that mean?)

  4 January 2016, 18:49:41 self-test - spent

  If you read the report you notice there is nothing on the battery. Do not post these reports unless you have been asked to do or have a problem identified in the report for which you need assistance.

  Your battery information is reported in the power section of the information system located in your Utilities folder. Monitor user activity to see if you can identify any process consuming a lot of time processor.

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Reinstall OS X or do run these items:

  Try these in order to test your system after each see if it is back to normal:

  1. a. reset the PRAM and NVRAM on your Mac.

  b. Macs with Intel processors: reset of the controller (SMC) system management

  2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:

  HD recovery start: restart the computer and after the buzzer, press on and press and hold the

  COMMAND and R keys until it appears the Utilities menu screen.

  3 fix the hard disk and permissions: select startup drive in the Utilities menu utility. Fix the hard drive and the permissions as follows.

      When the recovery menu appears, select disk utility and press the continue button. After loading disk utility select it

      back from Macintosh HD entry of the list on the left.  Click first aid button in the toolbar. Wait for the operation

      ends, then quit disk utility and back to the main menu.

  4 reinstall OS X: restart from HD recovery Select reinstall OS X from the Utilities menu, then click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.

  
  

• W8 pro-life, how do you find how much battery life is left on the Tablet?

  I just this receipt for Christmas, I would like to know how you find how much battery life remains on the shelf so I don't know when it needs to be recharged?

  http://batterybarpro.com/Basic.php

  I hope this helps...

• Reactivate the iPhone 5 with previous sim of my service provider does NOT

  I have an old iPhone 5 that I recently canceled my old service provider service.  I was able to remove the SIM card and the phone worked with wifi just fine for about 2 months.  That's what I want to do; Just use the thing as a wifi device.

  Now I updated to iOS to 9.3.2 and the phone will ask the old SIM again wake the phone.  I put the SIM card in and... nothing.  I try to wake the phone with iTunes and iTunes says the same thing... I need a SIM card in the phone.  But I have a SIM card in the phone!  Old SIM of my carrier original!

  What gives?

  Take a look at this article, it can help you. If you do not activate your iPhone - Apple Support

• i290 battery life is bad, truly the worst phone EVER!

  I've had this phone for 4 days and I hate to death. It shows only the last 20 calls (I do about 50 per day) and I have to charge it every night. I've had phones for $24.99 which hold the load better than this piece of junk.

  in any case, can anyone recommend a better phone? Is there a list of phones compatible boostmobile somewhere?

  Post edited by: pacojr67
  
  -Edited thread title, added tags.

  If you make 50 calls per day and each is about 5 minutes, then you have reached the nominal life of the battery of the phone:

  http://www.Motorola.com/consumers/us-en/consumer-product-and-services/mobile-phones/CI.i290-us-en.Al...

  There are other variables - the signal strength, other use, etc.. Since you have only had the phone for a few days, you should see all swap for something you like better.

• Maximize battery life flash by using the Scriptures of sector size file. USB and SD card storage limits Cap

  I use the sbRIO-9636 with 512 MB of non-volatile storage (Flash I presume?).  I'm not find the size of the sector in the Spec Docs, I found it, and Measurement & Automation Explorer does not display it no more, and I can't find one physical property of RT to make it.  I built a utility 'RIO leader Writer"for the text written to the buffer until the sector size is full or until the file is closed using the VI, but it would be useful to know the sector size.  For now, I'll assume 32 KB as I read the 9606 uses 16 k with its 256 MB drive.

  I have attached the utility (a single LV 2012 (VI) in case someone else would be useful.  I promise you there better performance or memory efficient, but its purpose was to save the Flash of my application, which supports the recording of data CAN (1000 + packets/sec) to the file, and it does that very well.  I continued to save the CAN data without it, with each written separately CAN package (~ 40 characters / record log, or ~ 820 written by sector of 32 KB), I probably would have started to lose areas in the next few weeks was not that of wear levelling - maybe even with wear leveling.  With that, life shouldn't be a problem (although the ability remains one, I can switch to USB storage if it is).

  Come to think of it, this can help with all the data being quickly to any player, as all readers use sectors (or blocks of sectors), assuming that you can sacrifice the RAM requirements to register your system hard disk (or to).

  Storage issues more:  What is the limit of the capacity of the SD and USB function storage on the sbRIO-9636 map?  The specification mentions support SDHC, but does not say specifically THAT SDXC is not supported.  It does support the monstrously huge SDXC cards or the max for SDHC (32 GB)?  In addition, with SD and USB storage, is size of block review?  LabVIEW has a property, I can read for all this that I don't see?

  Thank you!

  Erik Ledding

  Test Engineer

  Sub-zero, Inc..

  Hi Erik,

  I was wrong, we have a LabVIEW function that will find the size of area for a specific drive, it's the Get Volume Info.vi (link). You can run this VI and the flash drive on the sbRIO to find the minimum size of sector for reference entries.

  Regarding external drives to the USB port, I think you are right in your assumption about the limits of FAT16 and FAT32. Keep in mind there are also limits on file size of 2 GB or 3 GB of maximum file size.

  Most of the USB-to-IDE adapters works for the sbRIO (or cRIO), but USB-to-SATA is not supported to work on sbRIO. You can always try to use a SATA-USB HARD drive, but it might not work.

• Venue Pro 7140 11 - battery life jump upward or the alert?

  Is there that autonomy alert / popup, I can set so I am notified when the battery is almost discharged?  It just stops and I can't have that happen in the field.  I need the desktop but not on the side of Android.  I found an application of autonomy, but it does not help when the Office to do tests on the ground.  I need to be notified when it is low... ;-(

  Wow, it looks like that Dell Support Forums is as good as Online Chat and calling the 800 # SMH... I thought about it myself.

  go to power options and change time of notification to 10%, or when you want a notification appears.

• Given to replace my current iphone with a 6s - a trip that I can disable the use of boxes and use a unique sim card data for emails

  Given to replace my iphone today with a 6s - a trip that I can disable the use of boxes and use a sim card only data for email & web.

  If you go to settings > Mobile and less ' use of mobile data for: "turn off all except Safari and Mail

• VZW iPhone is unlocked? Means it can be used with a SIM card, anywhere in the world with any other SIM card from another provider, including the United States

  VZW iPhone is unlocked?

  Means it can be used anywhere in the world with any other SIM card from another provider, including in the USA?

  Yes, only bought it for full price directly from Apple.

  Buy from anywhere else or under contract with Verizon means that he will probably be locked.

• I use my iPhone 6 very often to my office for phone calls.  This will help overall battery life to stay connected as I have all these phone calls?

  I use my iPhone 6 very often to my office for phone calls.  This is my work phone.

  This will help life battery together if I keep the phone plugged in my phone calls?

  Thank you

  SUSE, you can use it while connected and in this way when you unplug to get somewhere, you know you will have a fully updated beautiful upgraded battery.

  Just don't leave it plugged constantly all the time — weeks or months.  A battery lithium needs periodically some running through it.  But certainly leave it plugged during the day of the company while using it, or even just for long calls will do no harm.

  Battery life is determined by the cycles, so if this reduces the rate of your phone through equivalent full charge and discharge cycles it can not hurt self-help (depending on how you use it, it cannot help battery life much either, but it probably won't hurt it).

• iPhone 1 (first generation) Sim Card tray

  Anyone know a source for the purchase of an an iPhone SIM card Tray 1 (first generation)? I have mine since 2007. My wife is an educator specialized and I would use the phone like an iPod Touch, basically. I have to get the iPhone enabled in order to use it, but requires a SIM card. The original plate is missing. I searched Amazon, eBay and the web in general. Can't seem to find a. Any ideas? I also have an iPhone 3G with a SIM tray but the tray does not adapt to the iPhone 1. Thanks for any help or ideas.

  I think you'd find it difficult to find, because of his age and that the 1 G is now a bit of a collectors item. If it is in good nic, other than the missing sim tray, I would keep it hidden and buy an iPod Touch (same one used) then set up a search saved in ebay for the Board and try and get your hands on one.

  It may be easier to buy a whole phone, I just did a search of ebay for the entire phone and they are ranging from £35 for one with a screen broken up to £3 500 for an open box.

• DV9000 laptop battery life

  I have a HP dv9000 series laptop for about 2 years and my battery is in poor condition.  It is typical of this battery life is only 2 years? Given that I keep my PC plugged in most of the time, he wears on the battery? I just want to know if I should buy a new battery or do I check to see if it is covered by the warranty.

  Thank you

  I'll save you the trouble. Even if you get the longer warranty the battery is covered with padt 1 year generally not unless you have obtained the guarantee of store on top of the HP warranty. 2 years isn't a bad battery life. That's all what I expect to get. Battery life is governed by the number of cycles of discharge and duration and charges since. If you take a battery that is new in the box, it will be lower after 2 years when new even if you do not use. If you literally never use the battery you can remove it during the execution of the laptop on the sector. He unloads up to like 30% and store it in a cool, dry and dark place (but not in the refrigerator).