IPhone 6 stopping constantly
For several months now, my iphone 6 continues to the stop. It turns off completely then shows the picture of the battery as the battery is dead, even though she has a load of 80 to 100% on it! I have twice the take in the Apple Store and had the Apple engineers look at it online and nobody seems to have an idea of what's going on. They all agree that my battery is perfectly fine. Phone is less than 2 years! I spoke with a few others who have the same problem with no resolution. In order for my phone turns off does not, I have to keep constantly hooked up to the charger. Everyone knows about this problem?
You or the people at the Apple Store that the phone back to the factory, without using backups and see if it stops always?
Use iTunes to restore your device to factory settings - Support Apple iOS
Tags: iPhone
Similar Questions
-
Camera front iphone 6a stopped working
My front camera of my Iphone 6 stopped working yesterday. When I pressed the button "rotate camera", the screen freezes a few seconds, the last image of the rear camera remains and is the screen is black or the screen returns to the camera back. I can either use facetime, the other sees me and I do not see too. I tried to reset. Does not work for some pictures. When you closed the app and reopened later, will not work. I had to reboot again. I got my iphone on August 17 and worked well on facetime and selfies.
What is the solution?
If the reset of the force has not worked, set it back to factory settings, without using the last backup. Test the phone. If it works, restore the backup. In case the problem comes back after the use of the backup, your data backup has been corrupted and cannot be used.
Use iTunes to restore your device to factory settings - Support Apple iOS
3. If the factory reset does not help, you will need to get the phone checked by Apple.
-
my iphone has got overload, iphone or iphone charger stop charging if it is 100% even if still plugged
Caused,
The overloads are not possible. Load is reduced to a trickle charge after reaching 100%.
-
My iPhone 4 stopped working yesterday, it frustrated me because I just a call, I intended to take it to get it fixed, but my sister advised I check the support of the community and guess what? It worked! Am so excited, I followed the instructions of the Mac, I pressed the Start button and the button operation at the same time and the magic took place, am so so excited. THANK YOU MAC!
Glad that your phone is working again.
What you were doing by pressing the button home and sleep for 10 seconds, until the Apple logo came back, is called "force restart '.
You won't lose data by doing this, but it can cure a few glitches. It is usually the last thing to try before you restore the phone to factory again or visit an Apple Retail Store or Apple authorized service provider, where your phone does not at all.
If your iPhone is not responding or won't turn on - Apple Support
-
iPhone 4 stopped showing incoming text etc. briefly.
My iPhone 4 always lit up the screen it is E' new mail, text, news, etc. All of a sudden since yesterday pm, he stopped it. I always get the message, but don't know about them. INHOPE, can someone uinderstand what is or has happened.
market royfromdownham wrote:
My iPhone 4 always lit up the screen it is E' new mail, text, news, etc. All of a sudden since yesterday pm, he stopped it. I always get the message, but don't know about them. INHOPE, can someone uinderstand what is or has happened.
Press and hold home/sleep set button until you see the apple logo and then release, then wait for the phone start up.
-
my iphone 6 stops and starts automatically IOS 9.3.1
My i phone 6 stops down automatically without active functions. I click Home and departure of buttons, but do not become active. After 5 to 10 Minutes, he won again. Need help to solve this problem.
Have you ever tried to plant via iTunes settings? Set up the data personal manually after that, without the help of the backup data and to test the phone. If it works as planned, restore the last backup.
If the phone does not work correctly after you set it back to factory settings, the issue might be related to material and the phone should be checked by Apple or an Apple authorized service provider.
Use iTunes to restore your device to factory settings - Support Apple iOS
-
iPhone 6 stops at a cool temperature
I started to have the question last winter. When I'm out in the cold, my phone suddenly stops any percentage of the battery is on the left. Even in the milder climate (5 ° C in March to the Canada) my iPhone 6 won't last a House of travel bike 20 minutes while in the inside pocket of my jacket. Once I go home, I can turn right back and it will support the rest of the day on the same charge.
So, it seems that the battery cannot provide the necessary power for the phone to operate in temperatures. But count me can last all day when I am on the inside. Everyone knows this? And a replacement of the battery could solve this problem?
Have you already checked this?
Your device is designed to perform well in a wide range of ambient temperatures, with 62 ° to 72 ° F (16 ° to 22 ° C) in the area of ideal comfort. It is particularly important not expose your device to ambient temperatures above 95 ° F (35 ° C), which can damage the battery capacity. In other words, your battery will not power your device as long on a given load. Charge the unit at high ambient temperatures can damage it more. Even storing a battery in a hot environment can damage it irreversibly. When you use your device in a very cold environment, you may notice a decrease in battery life, but this is temporary. When the battery temperature returns to its normal operating range, its performance will return to normal as well.
copied from: https://www.apple.com/batteries/maximizing-performance/
-
IPhone 6 stop when you take a picture
My Iphone 6 (a little more than one year - iOS 9.2.1) is going down, when I take a picture and I have a little less than 50% of the battery left. So I plugged into electricity to start again.
The only things that keep the problem is to switch the battery saving mode.
Anyone with the same problem?
Best regards, Laura
My iPhone will also turn off when you take a picture.
Happens to me on a 6 s iPhone too.
For me, it happens when I go out and have not used the phone for a while and pick up the phone to take a picture. It happened on a 5s iPhone in the past.
There is also usually a cold day, no sub zero, but cold.
It's especially annoying as when out and about, I usually don't have a power supply to plug the phone in.
If I leave the phone for half an hour, the phone can be turned on again without going through a connecting the power supply and it shows a level of reasonable, green power, in the status bar, but it stops again, trying to take a photo.
See you soon
Paul
iPhone iOS 9.2.1 6s
-
During the last two weeks, all changes (including new Contacts or changes/revisions to previous Contacts) have stopped syncing to my contacts in iCloud. I got my iPhone 5s almost two years and have never had this problem before. I look forward to thoughts about the causes and, above all, suggestions for solutions.
Try the settings/iCloud and remove the synchronization of Contacts. Wait a few minutes and then resynchronize.
-
I was using my Iphone overnight and he was charging and went up 23% and then when I'm done instead of it loads up to... It came down, and he ended up 1%, let him alone all night to recharge and I woke up and he was dead, I thought that "maybe it could be my cable." I used my other cable and left there for a good 30 minutes nothing so when I went with a friend, I asked, that I can use here he charger I left it loads and nothing, it's been 2 days since this happened and my phone will not charge or turn on... I need help, I even tried the method to hold the home button for 10 seconds and nothing. What's wrong?
It's may be a problem with the power outlet telephone is plugged, plug it on others and see if the problem is persistent.
-
MacBook Air with my iPhone 6.
Not sure if you have tried the following - open iTunes on your MacBook Air, go to preferences of iTunes and click on devices in the bar at the top of the Preferences window, select the backup and then click on the button "delete the backup.
In addition, backups are located in ~/Library/Application Support/MobileSync/Backup /.
You can access the library by opening Finder and then hold down the Option key while using the menu go to the Finder menu bar
-
screen iPhone touchscreen stop working after updating IOS 9.3.2
My phone was working without any problem and update the IOS 9.3.2 jumps on my phone. I update my phone as I normally. Now, the screen touch freaking work not AT ALL!
I tried a hard reboot I read MANY MANY MANY other users have this exactly the same problem. I tried to restore my phone and can't do same. Now my Itunes has decided on his OWN that is has an encrypted password that I NEVER put.
I'm so SICK of Apple, trying to fix 1 thing in IOS updates only break 50 other things!
Any help would be greatly appreciated. Technical support has been less helpful on the phone. They advised me to put out a follow-up movement in my privacy settings and it should fix the problem. It would be GREAT if the touchscreen works! Morans!
iPhone 6, iOS 9.3.2,and WORSE NEVER UPDATE!
I had problems with touch-screen with my iPhone 5 s immediately after the update to 9.3.2. It was very frustrating - the screen would bounce around to choose things that I wasn't tapping and scrolling fast and sometimes simply freeze completely for a few seconds. I've never had problems before update!
I have not found how to fix 9.3.2,and but I managed to restore my OS to 9.3.1 (which solved the problem of the touch screen) until the next version of iOS comes out which will be hopefully resolve this issue.
Here are the directions that I followed to roll back my iOS: http://www.gottabemobile.com/2016/05/16/how-to-downgrade-ios-9-3-2-to-ios-9-3-1/
-
I had to change the Apple ID due to a new internet provider and the subsequent new e-mail address. My iPhone (5 c/9.3) continually pray for my old user ID password. This is the password I know more knowledge or records. How can I get the iPhone to recognize and use the new Apple ID rather than the old?
What function or service on your phone asking you the code of the older?
If iCloud, you must provide the Apple ID and the password that was used to connect. Call the Apple Support if you can't give it. They may be able to help. You are the original owner of the phone? You have the invoice/proof of purchase?
Any service can be disconnected and then again.
-
iPad / iPhone drop connection constantly
I have a line electric WLAN system based on the modem provided by my ISP and a time Capsule Airport (in my office), three cards of Ethernet ZyXEL PLA4211 500 Mbps Mini Powerline Pass-Thru and two Apple Express stations in my bedroom and a living room, where I also have Apple TV. (iMac late 2013, El Capitan utility 10.11.3, Airport 6.3.6). First thing: everything works. I should mention that I have a very strong fast Internet connection (wireless to iMac Time Capsule). Everything is green and I can always listen to my music from the computer via Apple TV. The problem with my iPad and iPhone. If I move from one region to the other, I usually get a message telling me that the device cannot connect to the server. The only way I can get it to work is to switch to a different network, then back to the regular or restart the device. Once I did, everything is OK. If the problem doesn't lie with the network. It's as if there is something needs to be restarted every time. It is an annoyance, but gets on my nerves. Any help appreciated.
Michael
Take a look at this Apple Support article:
https://support.Apple.com/en-us/HT204051
Reset your network settings.
Settings - general - reset - reset the network settings
Reset your device. This will not erase your data stored on the phone.
- Press and hold the sleep/wake button
- Press and hold the Home button
- Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.
Alternatively, you can go to settings - general - reset - Reset all settings
-
House share the iPad iPhone problems stops
PC home sharing does not work correctly.
Bought on Apple's iTunes movies keep on reading and possibly pause stop playing all together.
This often occurs during movie playback.
Same movies work perfectly when shared to apple tv3 and tv4 to Apple isn't anything obvious on PC or network
The following article can help you.
Troubleshooting connections and Wi - Fi networks
WiFi Diagnostic Software (for Mac users)
You will also find help on this page, where I have collected some of the more unusual solutions for network problems.
When you make adjustments to your network for better optimization, you can find some of the points mentioned on this page useful.
Maybe you are looking for
-
Good day family My apple iphone has been linked with my iphone 5 when I was robbed they took my apple ipad. I reported stolen and it was blocked but now my iphone 5 is also blocked.it shows NO SERVICE all the time I have swiched on sometimes it works
-
I'm getting Bad pool caller error please help me I wil u give the silent file there is please help https://onedrive.live.com/redir?RESID=E8AA1ECAA522A19C! 19619 & authkey =! ALa_F2JBunaSF48 & ithint = the file % 2cdmp. Please help fasst PS: I have wi
-
Save image 12 bit <; with >; imaq
Following a previous question, I've done here, I discovered that I am able to install and use IMAQ. So I try to do what I need, is to record a 12-bit grayscale with IMAQ image. I read somewhere here that more can I go to save as 16 bit - I hope that
-
LJ Pro M1536 vertical line on copies of the ADF
Vertical line appears on copies by the ADF, but not on the copies placed on the glass. Product purchased less than 30 days ago if cleaning is not a problem, although I go through the cleaning cartridge, verification and re-configuration of the proce
-
Hi all.I want to create a virtual joystick as Vjoy device. (don't want to use the dll, etc...) So I just started to learn how to write a driver: NTSTATUS DriverEntry (PDRIVER_OBJECT IN pDriverObject, IN PUNICODE_STRING pRegistryPath){NtStatus = STATU