Camera front iphone 6a stopped working

Similar Questions

• My iPhone 4 stopped working yesterday, it frustrated me because I just a call, I intended to take it to get it fixed, but my sister advised I check the support of the community and guess what? It worked! Am so excited, that I followed the instructions of

  My iPhone 4 stopped working yesterday, it frustrated me because I just a call, I intended to take it to get it fixed, but my sister advised I check the support of the community and guess what? It worked! Am so excited, I followed the instructions of the Mac, I pressed the Start button and the button operation at the same time and the magic took place, am so so excited. THANK YOU MAC!

  Glad that your phone is working again.

  What you were doing by pressing the button home and sleep for 10 seconds, until the Apple logo came back, is called "force restart '.

  You won't lose data by doing this, but it can cure a few glitches. It is usually the last thing to try before you restore the phone to factory again or visit an Apple Retail Store or Apple authorized service provider, where your phone does not at all.

  If your iPhone is not responding or won't turn on - Apple Support

• Reinstall Microsoft Camera Codec Pack has stopped working in Windows 7 Home Premium, does not solve the problem.

  Hello.

  I've been an avid user of Microsoft Camera Codec Pack, and he worked a lot since I installed it-up to this point.
  A few days ago I noticed that my RAW / CR2 files are not displayed in the windows photo viewer (nor were the thumbnails).

  I tired to reinstall the codec without success pack; the installation process works fine, but after restarting the same problem persists (this also applies when I 'fix' Camera Codec Pack). I tired both the x 86 version and 64bits without result.

  I'm at the end of my mind, and I would be very happy to help :)

  Running on Windows 7 Edition Family Premium and my camera photo is a Canon 5 d Mk II.

  Hello.

  I've been an avid user of Microsoft Camera Codec Pack, and he worked a lot since I installed it-up to this point.
  A few days ago I noticed that my RAW / CR2 files are not displayed in the windows photo viewer (nor were the thumbnails).

  I tired to reinstall the codec without success pack; the installation process works fine, but after restarting the same problem persists (this also applies when I 'fix' Camera Codec Pack). I tired both the x 86 version and 64bits without result.

  I'm at the end of my mind, and I would be very happy to help :)

  Running on Windows 7 Edition Family Premium and my camera photo is a Canon 5 d Mk II.

  ============================================
  If the following codec pack is a more recent version
  It may be worth a try.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Microsoft Camera Codec Pack
  http://www.Microsoft.com/download/en/details.aspx?ID=26829
  (Windows 7, Windows Vista Service Pack 2)
  This package will allow RAW supported
  camera files visible in Windows Explorer

  There is also an alternative retail (not freeware):
  (at least there is a 15 day free trial)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  FastPictureViewer Codec Pack
  http://www.FastPictureViewer.com/codecs/
  (WIndows XP SP3 / Vista / 7 / 8)

• Zoom camera blackBerry Smartphones has stopped working

  I noticed this weekend that I can't zoom in on the more past camera.  He used to work, but now nothing happens when you move the trackball.  Does anyone else know this?

  bhanna, with the BlackBerry smart phone, disconnect the battery a few seconds and then reinsert the battery to restart.

  Now, after restarting, try the zoom of the camera once more.

• Re: Qosmio F50 - 12W - front buttons have stopped working

  Hi, I am the F50 - 12W. It is under Vista Home Premium.

  First thing I did was to go through the list of services and the vista settings, turn off everything I don't don't need or use. Worked a treat. But...

  Only problem now is that I managed to stop the operation of the front buttons. They do the beep when you press on and do the thing of glow wee to show that they responded.
  But nothing is really happening.

  Anyone know what I could have done?

  Thank you.

  Hello

  Really interesting, I had the same problem a few days ago on my Qosmio F50 I tried many things and at the end of the story, I had to reinstall Windows because an application or a Windows Update wasn't compatible with the software that controls the light buttons you want to say

  In any case, I think in your case it of the same. After you have disabled/deleted some stuff and installed the updates/applications, only the buttons don't work anymore.

  First of all I have to say it is important that you disable t n programs all services of Toshiba or startup in msconfig. This can affect the illumination function buttons and FN keys so check cela and allow all the stuff from Toshiba.

  If it doesn't work after that you should try to reinstall the package of value added. This package contains the software and drivers of these keys. You must follow my workaround solution:
  1. download the latest PPV for your F50 on the Toshiba site
  2. go in Control Panel > Add/Remove programs. Find the Toshiba value added package and remove it
  3. restart the laptop
  4. download and install CCleaner. This cool cleans up the registry of Windows and system files. He should find some registry keys of Toshiba you should remove with CCleaner.
  5 reboot the laptop
  6. install the PPV that you already downloaded
  7 restart once again

  You are lucky is it support buttons work and if not you should look into the Toshiba. Here, you can assign different application for the multimedia keys. For example switch illumination, you must allocate the dimmer.exe. That you should find in the Toshiba folder (C:\program Toshiba).
  Check it!

  In the worst cases, you need to reinstall Windows using the Toshiba recovery disc or HARD drive recovery option. :(

• screen iPhone touchscreen stop working after updating IOS 9.3.2

  My phone was working without any problem and update the IOS 9.3.2 jumps on my phone. I update my phone as I normally. Now, the screen touch freaking work not AT ALL!

  I tried a hard reboot I read MANY MANY MANY other users have this exactly the same problem. I tried to restore my phone and can't do same. Now my Itunes has decided on his OWN that is has an encrypted password that I NEVER put.

  I'm so SICK of Apple, trying to fix 1 thing in IOS updates only break 50 other things!

  Any help would be greatly appreciated. Technical support has been less helpful on the phone. They advised me to put out a follow-up movement in my privacy settings and it should fix the problem. It would be GREAT if the touchscreen works! Morans!

  iPhone 6, iOS 9.3.2,and WORSE NEVER UPDATE!

  I had problems with touch-screen with my iPhone 5 s immediately after the update to 9.3.2. It was very frustrating - the screen would bounce around to choose things that I wasn't tapping and scrolling fast and sometimes simply freeze completely for a few seconds. I've never had problems before update!

  I have not found how to fix 9.3.2,and but I managed to restore my OS to 9.3.1 (which solved the problem of the touch screen) until the next version of iOS comes out which will be hopefully resolve this issue.

  Here are the directions that I followed to roll back my iOS: http://www.gottabemobile.com/2016/05/16/how-to-downgrade-ios-9-3-2-to-ios-9-3-1/

• Rear camera / flashlight has stopped working

  I noticed this morning that I went to take a picture my camera back iPhone 6 no longer works. As chance would have, my warranty expired 11 days ago.

  The front camera still works, but I see a black screen when I try to use the camera back. In addition, when the flash icon should be, there is a yellow exclamation point symbol. If I press on it, I see a message that says "Flash is disabled. The iPhone needs to cool down before using the flash. "(The iPhone is not visibly hot).

  In addition, the light will not illuminate.  Type the key does nothing.

  I tried some things:

  * Kill and restart the camera application

  * Restart the phone

  * Charging to 100%

  * Turn off the phone, wait 15 minutes, restarts

  * Reset all settings

  * Erase content and settings and then set up as new iPhone

  At this point, I'm sure it's a hardware problem.

  12 days ago (one day before the expiration of the warranty), I got my phone repaired by Apple to fix the front camera, which was poorly aligned (search for "crescentgate"). The camera and a flashlight worked yesterday, but not today. The phone has not been dropped or wet - it has just stopped working.

  I guess that this pourrait be covered by the 90-day service warranty?  A chat line of Apple representative told me that it should.  But if not, it will be Apple charge me as a replacement for the camera?  I can only find a single out-of-warranty repair costs listed $299 and there is no way I'm paying a lot when companies third repair will do it for $80. Someone at - it experience with this?

  A C & P is appropriate here...

  Here are a few standard repair procedures:

  First of all, try a system reset.  He heals many ailments and it's fast, easy and safe...

  Hold down the power button and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You won't lose any apps, data, music, movies, settings, etc.

  If the Reset does not work, try a restore.  Note that it is nowhere near as fast as a Reset.  It could take well over an hour!  Connect via a cable to the computer that you use for synchronization.  In iTunes, select the iPod/iPhone/iPad, and then select the Summary tab.  Follow the on-screen instructions for restoration and don't forget to say 'yes' to safeguard.  You will be notified that all data (apps, music, movies, etc.) will be deleted, but that the restoration is complete, you will be asked if you want the backup content to be copied to the iPod/iPhone/iPad.  Even once, say 'yes'.

  At the end of the basic restore, you will be asked if you want to synchronize the iPad/iPod/iPhone.  As before, say 'yes'.  Note that syncs selection will disappear and the restoration will terminate if you do not respond within a reasonable time.  If this happens, only applications that are part of the IOS will appear on your device.  Corrective is simple – bottom right of iTunes, choose manual 'Sync '.

  If you are unable to do the restore (or it does not help), go into Recovery Mode according to the instructions here.  You will lose all your data (game scores, etc.,) but, for the most part, you can redownload apps and music without being recharged.  In addition, read this.

• 6 s iPhone camera and flashlight does not work

  Help! My iPhone 6s camera and a flashlight do not work.

  I tried forcing him to leave the app, reboot, reset the phone using the home and power buttons, but nothing has worked. I just get a black screen. I can't use the camera front, no more.

  Other ways to solve the problems?

  Try below:

  Restore backup

  Restore like new

  http://support.Apple.com/en-us/HT201252

  If no joy, taking a go-bar genius with Apple for an assessment,

• GPS suddenly stopped working on iPhone 4S

  Hello

  Suddenly, the GPS on my iPhone 4 works a few weeks ago. At first I thought it was the app, but I noticed that is not work in other applications too, so I think it is necessary with the GPS on the phone itself. I did not change anything to cause the problem, it happened by itself.

  In troubleshooting, I have reset the GPS repeatedly following the instructions found on Google. I downloaded an application called State of the GPS and at first use, it showed that I had a few signals, however, it was a cloudy day, so I was not too concerned. I thought that the reset had solved the problem.

  No... so one day completely clear, I had "Bad difficulty" on GPS and GPS status while it is on the slopes of Ski or Argus application.

  I have reset the GPS again. Still no joy.

  I've updated the OS 9.2.1 reset and re-callibrated GPS doing the figure 8 sweep as suggest on Google with the airplane off the coast Mode. I still have some difficulty on the State of the GPS, no GPS on the Ski slopes and Google Maps doesn't have a clue where I am. Of course, on location services great for these applications.

  Are there other solutions?

  Thank you very much

  Rosaroo

  Hello Ros,

  If the GPS on your iPhone does not work properly, first try the following troubleshooting steps for location services.  If these steps do not resolve your problem, you may need to update the iOS software.  Don't forget to backup your iPhone before you make changes to it.

  Help with maps on your iPhone, iPad or iPod touch

  1. Tap Settings > privacy > location Services and to make, of course, this location Services and cards are turned on.
  2. Make sure that you set the date, time and timezone correctly on your device. Go to settings > general > Date & time. If possible, use the value automatically.
  3. Restart your device.
  4. Make sure that the cellular data or Wi - Fi is enabled.
  5. Try another location or switch to another Wi - Fi network.

  Services Locator uses GPS, Bluetooth and Wi - Fi hotspot and cell tower crowd source places to determine your position. Learn more about The location Services on your iOS device.

  Privacy and location for iOS Services 8 and iOS 9

  Enable or disable location Services

  You can enable or disable location Services in settings > privacy > location Services. You can enable location-based Services during the wizard process of installation or later through the creation of location-based Services. You can individually control applications and system services have access to the data of location Services. When location Services are disabled, the apps can't use your position in the foreground or background. You will thus limit the performance of various Apple and third-party applications.

  Settings > privacy > location Services.

  

  Settings > privacy > location Services > System Services.

  

  Reset or disable location Services

  Location warnings are applications that make the apps (for example, Camera, compass and maps so that location-based applications) to use the Services of location with these applications. An application will ask you to leave the first time, he needs to access the data of location Services. Allow tapping will give this app permission to use location Services according to your needs. Tapping can not prevent an application to access the data of location Services. Apps don't use your location until they asked permission and you grant permission.

  

  If you want to reset all settings to factory default location, go to settings > general > reset and tap reset card and privacy. When your location and privacy settings are reset, apps will be stop using your location until you grant them permission.

  Improve the accuracy of GPS

  GPS accuracy varies according to the number of visible GPS satellites. Location of all visible satellites can take several minutes, with accuracy gradually increasing over time. Follow these tips to improve the accuracy of the GPS:

  • Make sure that you set the date, time and timezone correctly on the device in settings > general > Date & time. If possible, use the value automatically.
    Important: Incorrect settings on your computer can sync to your device. Check the date, time and time zone on a computer that syncs with your device.
  • Restart your device.
  • Make sure you have a cell phone or Wi - Fi network connection. This allows assisted GPS (A - GPS) on the device to locate the fastest visible GPS satellites, in addition to providing information about the initial location using Wi - Fi or cellular networks.
    Microcells (sometimes called Femtocells) are not supported with location Services.
  • Keep a clear view of the horizon in several directions. Please keep in mind that walls, vehicle roofs, tall buildings, mountains and other obstacles can block the line of sight to GPS satellites. When this occurs, your device will automatically use a Wi - Fi or cellular networks to determine your position until the GPS satellites are still visible.

  Put your device in recovery mode and set it up again

  Put your device in recovery mode and set it up again

  1. Connect your device to your computer and open iTunes. If you don't have a computer, borrow one from a friend or go to an Apple Store or service provider authorized Apple for help.
  2. When your device is connected, force restart it: press and hold the sleep/wake and home for at least 10 seconds, and only release when you see the Apple logo. Keep until you see the screen in recovery mode now.

     

  3. When you see the option restore or update, Choose update. iTunes will try to reinstall iOS without erasing your data. Please wait while iTunes downloaded the software for your device.

  
  If the download takes more than 15 minutes the device out of recovery mode, you must repeat these steps and choose restore instead of update when you return to this step.

  

  ​

• After the update or restore is complete, configure your device. If you have backed up your device with iTunes or iCloud and you need to restore your device in step 3, you may be able to restore from your backup during installation.

Take care

• iPhone 6s more touch ID has stopped working

  ID touch has stopped working, I'm in iOS 9.1.

  Is there a fix for this problem?

  Hi rulmer,

  If you are not able to use Touch ID on your iPhone, the steps below can help restore this functionality to the device.

  • If you have just restarted your device
  • If your fingerprint is not recognized five times in a row
  • If you have not unlocked your device to more than 48 hours

  • If you have just registered or deleted fingerprints
  • If you try to open Touch ID & access code in the settings menu
  • If necessary password is defined on immediately under settings > General > Restrictions

  If you still need help, follow these steps. Try again after each step:

  1. Make sure you have the latest version of iOS.
  2. Make sure that your fingers and the Home button are clean and dry. 1 for Home button, use a clean, lint cloth to wipe off any dirt or debris.
  3. Your finger should completely cover the Home button, touch the surrounding metal ring. Contact ID is scanning, you should not press hard, tap too quickly or move your finger.
  4. If you use a case or a protective screen, make sure that it does not cover the Home button or the surrounding ring.
  5. Tap Settings > Touch ID & access code. Make sure that the Unlock iPhone or iTunes and App Store is lit, and that you have entered one or more fingerprints.
  6. Try to register another finger.
  7. If you cannot register your finger, take your camera to a store Apple Store or Apple authorized service provideror Contact the Apple Support.

  1 moisture, sweat, lotions, oils, cuts, or dry skin may affect fingerprint recognition. Certain activities can also temporarily affect the recognition of fingerprints, including exercise, shower, swimming, cooking, or other conditions or changes that affect your fingerprints.

  Use the ID button on iPhone and iPad
  https://support.Apple.com/en-us/HT201371

  Kind regards!

• Please I have iPhone 6 more stopped working all of a sudden shows apple logo then black screen I can solution?

  Please I have iPhone 6 more stopped working all of a sudden shows apple logo then black screen I can solution?

  Have you tried to restart the iPhone by pressing and maintaining the sleep/wake and home buttons?

• my iphone 6 more simply stopped working and no solution yet

  Today my iphone 6 it simply stopped working today.  I have tried every fix posted to solve this and nothing.  Held the House and buttons on/standby for 10 seconds, then press /wake of sleep for 3 seconds before also hold the home - plugged button on the computer and I tried to restore using itunes - all without success.  It will literally stop just with 42% charge left on it.  What would you recommend?  My phone is important for my work. Just get a new one?

  Try recovery Mode:

  Connect your device to your computer and open iTunes.

  When your device is connected, force restart it: press and hold the sleep/wake and home for at least 10 seconds, and only release when you see the Apple logo.

  Keep now until see you the recovery mode screen and wait that he eat.

  You may need to do the above, more than once as recovery mode is difficult to enter.

  Restore first as New and test. Then restore backup if you wish. If the backup is corrupt it will probably bring back the question.

  https://support.Apple.com/en-us/HT201263

  If the steps above do not help, you may need to consider at an Apple store for testing.

• iPhone more replaced 6 speaker stopped working after update to iOS 9.3.4.

  iPhone more replaced 6 speaker stopped working after update to iOS 9.3.4.

  New speaker of iFixit. After replacement speaker works perfectly. With FaceTime, the call, music, etc. And IPhone running on iOS 9.3.3. But after the update to IOS 9.3.4 speaker stopped working. Several restarts and total content and deletion of parameter did not help.

  Axiomer wrote:

  New speaker of iFixit.

  It is a problem.

  iPhones are not serviceable by the user.

  You're on your own.  After this service yourself, you finished your warranty (if she was still in effect), and Apple will not help you either.

• my iphone 5 c screen stops working when I remove the case

  my iphone 5 c screen stops working when I remove the case

  Delete this case? Please explain what you ask a little more clear.

• Built in web cam stopped working - Satellite A200

  The webcam integrated on my Satellite A200 stopped working yesterday and I don t know why. I have not recently installed new software, but it is not recognized when I use Skype or any other program. When you try to use the camera, an error says no camera is recognized or it's off.

  I uninstalled the driver and reinstalled several times but it didn't help.
  Please, does anyone have any ideas? (Vista OS).

  Hello

  Sorry, but it is not easy to say what the problem is here. I recommend you to roll back OS to an earlier time using System Restore tool. I'm sure that you'll be able to reuse cam.

  I cam on P200 and use it with Skype without any problem. I really hopr you will be able to solve this problem.

  Good luck!