iPhone and iPad can not connect to iMac

Similar Questions

• iPhone and iPad does not connect to internet

  Hello

  Since yesterday, I was unable to connect to internet via wifi on my iPad and iPhone.  They show the power of the full signal and says I'm connected, but won't load Web pages or refresh applications.  When I disable wifi on my phone everything works fine on the LTE, but I don't want to use my data.

  I think it must be something with the update iOS because:

  -J' completely rebooted our router and modem and it worked on my iPad for about 30 seconds (what makes a Web page) before it stopped working again.

  -My boyfriend did not the last update on the iPad or iPhone, and both connect on our wifi at home, while my iPad or iPhone will connect to the internet.

  -My iPhone also does not connect to the wifi in my work, even though I know it works as I am online on my computer work via wifi.

  I noticed something strange on my iPhone and iPad when I went to check the settings wifi yesterday - the VPN configuration is flashing/refreshing without touching me, even if I don't have everything set up VPN connections.  When I actually click on VPN, an error is displayed.  There may be something wrong with the VPN on the new update which blocks the wifi signal?

  
  

  I really appreciate your help!
  

  If you are able to connect your iPad and iPhone to your wireless router agreement but the iPad and iPhone will not connect to internet, it is unlikely to have anything to do with the version of iOS.

  Try this:

  Restart your router (unplug unit, wait ten seconds and then reconnect it).

  Wait for the router shows all lights normal and connected.

  Now, reboot your iPad or iPhone

• All Iphones and Ipads can not find via AirPrint printers.

  
  

  Hi Bill,

  Believe that the problem is related with your router multicast support, it is essential to support the mulitple packages to use AirPrint.

  The following discussion about the choice of your router IGMP Snooping can help solve the problem:

  https://discussions.Apple.com/message/22131110#22131110

  I would ensure that iOS devices are connected to the 2.4 GHz wireless network, the printer does not support the connection of 5 GHz and two devices must be connected to the broadcast wireless in the same range.

  Hope that helps,

  Shlomi

• Yahoo password email changed computer but the iPhone and iPad can always GET mails without updating the password

  Yahoo password email changed computer but the iPhone and iPad can always GET mails without updating the password...
  Normally, it should show as 'could not load the mail' or 'impossible to download the mail' or 'Please verify your password... "
  It's really wired.

  You are probably using IMAP

  Update contained in one place - it synchronizes across devices - all as is your email

  With POP accounts, you'd see what shows your question

  Instructions on how do to vs in IMAP POP3 - IMAP

• my user passwords have been changed and I can not connect

  my user passwords have been changed and I can not connect

  Hello
  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 9.3.2 iOS that wake up my iPhone and iPad a cellular connection. They connect to my wifi until I use them. This means that the activity of the Baker all arrives on my data connection and not my wifi network at home. How can I fix it.

  iOS 9.3.2

  My iPhone and iPad wake connected to cellular data so that I have a home network and expect things to happen on my network home. It costs me in the case of the background activity while I'm SLEEPING on my cell the att network connection. How can I fix?

  Thank you

  Barb

  Maybe a WiFi Assist. On the devices go to settings > cellular > scroll all the way down > Wi - Fi help > Toggle Off. See if that helps.

• My iPhone and iPad are not visible to my Macbook Pro in parachuting, but they are visible to the other... How can I solve this problem?

  How can I fix?  iPhone and iPad are visible to each other in parachute drop but they does not see my Macbook Pro.

  Greetings brsm1990,

  Thank you for using communities Support from Apple!

  I understand that your iOS devices can see each other with the help of parachuting, but your Mac does not see them. To begin troubleshooting, I suggest you read the information in the following article.

  Use AirDrop to send the contents of your Mac - Apple Support

  Tips for sending items

  If you do not see the recipient in the AirDrop window or sheet:

  • Make sure that the two devices have on AirDrop and are less than 30 feet (9 meters) on the other.
  • If you send to an iPhone, iPad or iPod touch:
    • Your Mac must be a 2012 model or newer with OS X Yosemite or later.
    • The iOS device must use iOS 7 or later and have Personal Hotspot disabled in settings > cellular.
  • If you send a Mac:
    • If the receiver Mac uses OS X Mavericks, Cougar or Lion, then open a window AirDrop: choose go > AirDrop in the menu in the Finder bar.
    • If the receiver Mac is a 2012 model or, click "Don't see you looking?" in the drop window or the sharing of the sending of the Mac spreadsheet. Then click on "Search for an older Mac."
    • Know if the Mac has "block all incoming connections" enabled in the security and privacy preferences. A Mac does not receive items using AirDrop if this setting is enabled.
  • If AirDrop on the receiving device is set up to receive points of contacts only, make sure that the two devices are connected to iCloud. Also make sure the associated e-mail address or phone number to your identifier Apple is in the Contacts application on the receiving device.

  

  Release system requirements

  Send items to an iPhone, iPad or iPod touch, or to receive these devices, you need a 2012 model or later Mac with OS X Yosemite or later version, except the Mac Pro (mid-2012).

  To send items to another Mac, you must:

  • MacBook Pro (Late 2008) or later, excluding the MacBook Pro (17 inch, late 2008)
  • MacBook Air (late 2010) or later version
  • MacBook (Late 2008) or later, excluding the white MacBook (Late 2008)
  • iMac (early 2009) or later version
  • Mac Mini (mid-2010) or later version
  • Mac Pro (early 2009 with AirPort Extreme card or mid-2010)

  Learn how to identify your model of MacBook, MacBook Pro, MacBook Air, iMac, Mac minior Mac Pro.

  I know you said that your Mac does not see your iOS devices, but your iOS devices sees the Mac?

  Best!

• "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

  So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

  So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

  As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

  Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• How can I remove photos on my iPhone and iPad but keep on my iMac?

  I have an iPhone, iPad and iMac.  I take pictures on the iPhone and iPad.  How can I get my iMac on auto download and keep them on iMac but delete on iPhone or iPad.  I got it about 7 months ago, but some parameters need to be changed because when I delete on iPhone or iPad, it removes iMac as well.

  You have enabled iCloud photo library. It is what allows to synchronize all of your devices.

  Make sure that all your images are always in the Photos in full resolution. Then turn off iCPL and My Share Photo on all of your devices, including your Mac.

• forget password and I can not connect wifi to reset the password

  Hello

  I forgot my password after changing to connect to my computer and I can't connected to wifi to reset the password

  I need to lose my everything on my Imac with nothing

  What should I do?

  An apple article is here: change or reset the password of a user account from OS X - Apple support

• How to connect to the iTunes Store? and I can not connect.

  I do a new Apple ID and then want to download. But I can not connect. They send me only * your ID Apple has not signed iTunes Store *.

  And then what happens? If you are prompted to enter payment details you made?

• my windows vista computer keep saying the user profile cannot be loaded.and I can not connect with my password. And I need a floppy disc or usb flashdrive.please free help to change password

  I can not connect and it says failed to connect to the profile.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Problems with wifi, I have a wifi extension in my house and I can not connect

  Original title: Wifiproblems

  Problems with wifi, I have a wifi extension in my house and I can't connect it, I try with support but it did not work. It's a shame in a new tablet to have this problem

  It only happens with the tablet surface, not with other devices

  It's an easy way to solve

  I saw a similar situation in forum wireless, they have solved the 'limited' problem by disabling the Extender, and then turning turn it back on. He solved their problem, and it is easy to try. I hope it works for you.

• iPhone and Ipad will not synchronize with iCloud

  I don't know what to do. Time, iPhone and iPad won't sync photos with iCloud. It says "update" but used to synchronize no matter what image. Help, please!

  dosmic wrote:

  I don't know what to do. Time, iPhone and iPad won't sync photos with iCloud. It says "update" but used to synchronize no matter what image. Help, please!

  iCloud photo library - Apple Support

• My site is down and I can not connect.

  Help, please!

  My site was working.

  But now he is not.

  www.morganevansmedia.com

  I can not connect to BC either.

  Hello

  Your site does not point to Business catalyst, so you cannot access it by using your custom domain name. Unless you do this, copy the url for your system to connect to your site administration panel.

  Login administration

  You can use the following method to point your domain to BC

  http://docs.BusinessCatalyst.com/user-manual#! / site-settings/site-areas/change-the-d n-name-of-your-website

  Add a domain name to your site by using an external DNS service

  Let me know if you have any question.