iPhone and ipad for restitution

Similar Questions

• No reliable WiFi for iPhone and iPad

  I have an Airport Express, Time Capsule with two extensions Express airport and once every 3 days I have to power cycle to get my iPad and iPhone to be able to use the Wifi.  I-devices connect and show they have Wifi signal but they cannot transmit data. The airport on the iPhone and iPad App show Extenders but do not see the time Capsule (which provides the route to the internet) when this symptom occurs. I have also 2 MacBooks using the airport for Wifi and they do not seem to be affected. Once I have power cycle the Wifi Time Capsule works again for up to 3 days and then I'm right back where I started.

  I am really frustrated with this, if anyone has any ideas of what I can do to fix this, I'd love to hear them. -Like to me, I may need to consider a new airport or an alternative companies Wifi router to get the reliability, I need.

  Time Capsule is currently running firmware 7.7.7

  Express Extenders are 7.6.7

  The two iPhones are 6 s on 10 iOS version

  iPad Pro is iOS 10

  The two MacBook with OS X 10.11.6

  FWIW, there were a few post here associated with iOS 10 and network connectivity. Nothing substantial, but just letting you know. However, one question would be: do you have this start happening after the upgrade of your iOS devices? It also affects your so non - iOS devices?

  That said, let's try to exclude your current network configuration. You mentioned that you have Time Capsule (TC) and extend its Wi - Fi network with two base station AirPort Express (AX). Is the link between the AXs and the TC wired or wireless?

  What are the exact models of each of your base stations? Where the AXs extending regarding the TC?

• How can I add a separate apple for the iphone and ipad wife id

  How can I add a separate apple for the iphone and ipad wife id

  Hi, are the measures already implemented? If they are, you need to configure them again and establish a Apple ID at this time.

  Apple ID - Support official Apple

• How can I fix iphone and ipad to recognize my printer air.  I t o disconnect the printer and wait for 30 seconds before reconnected and then they both recognize the printer

  How can I fix 6s iphone and ipad air when they do not recognize my printer air.  After unplugging the printer for 30 seconds, they can connect to the printer

  Hey robertafromnull,

  Thank you for using communities Support from Apple. We can see from your post that you are having problems with printing of your devices on a printer of Air and that it would be happy to provide advice to solve this problem.

  Let's start by going to the section called "If you can not print on your AirPrint printer" in this link here: Topic AirPrint. This should contribute to help you get started with you back to printing from your iPhone / iPad. Let us know if this can help, or if you encounter any problems.

  Kind regards.

• Just tried to download patches for the iOS version 2.3.2 Revel and got directed to the Apple site to re - pay $79. -? WTF? You try to download on Mac, iPhone and iPad? Fees once paid? Help?

  Just tried to download patches for the iOS version 2.3.2 Revel and got directed to the Apple site to re - pay $79. -? WTF? You try to download on Mac, iPhone and iPad? Fees once paid? Help? Also as a shooter, I love Nikon LM program, but Apple Mac, it blocks, the Adobe LM works better? If so what kind of discount can give a shooting game?

  Bill

  With regard to Revel:

  You can install free revel if you are a paid subscriber or not. I don't know why or how you got to pay apple site. Maybe you clicked on a link.

  On your ipad and iphone, you can go to the app store, search for revel and press "install". There is not a new version for mac, but you can go on the mac app store and install version 1.10.

  Guinot

• Tips on improving the graphics for the app for iPhone and iPad

  I'm creating an application for iPad and iPhone 4 and it looks terrible on the iPhone 4.

  I created the Flash file in Flash IDE with Movie CS5.5 size 1024 x 768 and I use the AIR according to the parameters of IOS:

  Rendering: CPU

  Device: iPhone and iPad

  Resolution: high

  All of my graphics are vector, so I assumed that it would be the crisp air on both devices. It is not as perfect as you are looking for on the iPad as it appears on my PC screen, but I can live with that. However, I can't live with the appearance of the iPhone 4.

  So I'm looking for advice on how to improve the appearance of the iPhone 4.

  As far as I know, there isn't a way to use the 2 sets of graphs, one for each device. Please correct me if this is wrong and she would offer me a solution.

  Do all the graphics in PNG would be a solution?

  BTW I use AIR 3.2 SDK if that has to do any and my graphics are static.

  Thanks in advance.

  Nice vectors will look depends on the setting of stage.quality. Try it on medium or high instead of low. In addition, CPU or direct is likely to give more beautiful than GPU vectors only.

• TimeCapsule wifi does not work for iphone and ipad, but doesn't work for laptops

  I just got a new 3 TB timecapsule to replace my old 1 TB timecapsule.  Everything seems in place and I transferred all my data to the new.  Our computers two apple laptops gets wifi nine immediately, but our two iphones and an ipad receive no wifi.  They show that they are connected to a new network, but not WiFi.  Can someone tell me what should I do?  Thank you!

  On the iphones and ipad clear on all networks known. Restart the device and make a new configuration of the network.

  If they are later version idevices... test in the same room as the TC. Still have problems reset the TC and give it a new configuration... Use very short names, without spaces and pure alphanumeric characters. Test first without password... It should work fine... Then add a password... Make sure that it is as pure of 8 to 20 alphanumeric characters.

• How to iphone and ipad detectable with the Mac for wireless and Bluetooth

  iMac is 21.5-in. version 10.11.5; iPhone is 5 c, version 9.3.2. iPad is version 9.3.2. Each device has the ability to drop and it works between iPhone and iPad, but no device is discoverable to the iMac.  I use the dongle Broadband Pendo, connected on router NetcommWireless. The ipad name on the screen of the computer and the computer name displays on the screen of the ipad, but they co not connect. The iPhone name does not appear on the computer screen.

  Go to System Preferences > Privacy & Security > firewall. Turn off the firewall, then restart. The firewall software (if activated) blocks Airdrop.

  Barry

• iPhone and ipad: printing from iPhone / iPad for HP OfficeJet 7612

  Just hooked up new printer HP OfficeJet 7612 to replace OfficeJet 6600. My iPhone and iPad easily prints pictures on 7612 via my wireless network but do not print anything else (emails, web pages, etc.).  This has never been a problem with the 6600. When I hit print, nothing happens. The website says that air Print will automatically work that she has done on the 6600, but not the new 7612.  What Miss me?

  Found the problem. I had to go into the settings of the printer and allow shared printing. Problem solved.

• Problem with iPhone and iPad ios10 connect with iTunes version 12.2.2

  Yesterday, I upgraded my iPhone and iPad to ios10 successfully. However, when I try to connect to my Macbook OSX version 10.7.5 running with iTunes version 12.2.2.25 it gave me this error "iTunes could not connect to the iPad because an invalid response was received from the device." I got the same error when I connect my iPhone as well.

  Now I can't restore my iPad or iPhone in low-grade IOS because iTunes can not see my devices.

  Someone at - it this experience after upgrade to ios10?

  Hi Had3s,

  I understand that after updating to iOS 10, your MacBook is more recognized in iTunes. I know it's important to be able to sync your iPhone with iTunes, so I'm happy to help you.

  Read this article that covers some common troubleshooting for this issue:
  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  Note that the likely cause here is an older version of iTunes. Since iOS 10 is still new, it is important to have the latest version of iTunes installed. Currently, it is 12.5.1, that requires OS X 10.9.5 or later version must be installed:
  iTunes - download iTunes - Apple

  Since you currently have OS X installed 10.7.5, you'll want to update to OS X as well. You can see more info on how to upgrade to the latest version of Mac OS X here:
  Update of OS X El Capitan - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• Synchronization problem between iCloud, iPhone and iPad.

  Good, if I want to sync my iPhone and iPad to iCloud, but I don't want that there is no synchronization BETWEEN devices. In other words, I don't want the notes and photos from my iPhone find you on my iPad and vice versa. How to make that happen?

  The iPhone and the iPad should be connected to different Apple IDs to iCloud. If you turn on iCloud for both and they are saved in the same Apple ID and you select this option for sync or download content, they should be the same, or you will crush either. Separate IDs is the only answer.

• It is tellig me my password on my iphone and Ipad

  my iPhone and iPad tell me that my access code is incorrect

  You enter the wrong password, if you know for sure the pass you entered the password defined for the devices, contact apple: 1-800-692-775. Since you have an iPad and an iPhone, try the password of the other device on the other. password iPhone to the iPad and the other way around.

• How to get my contacts from my iPhone and ipad to update my iMac

  Hello

  As far as I can tell, I have my contacts updated in place to sync between my iPhone and iMac.  I have 193 contacts on my iPhone and iPad.

  On the iPhone and the iPad, they show that the

  All the iCloud

  two groups I created, family and a working group, the two appear under that.

  on my iMac, I see 36 contacts and a mismash of groups which are old.

  Thus, it seems that my contacts are not synchronized to the iMac.  In iCloud on my iMac, I have verified contacts.

  I don't know what else to do.  Any suggestions?

  Michelle

  Hello BellaMichelle,

  Thank you for reaching out to the Community Support from Apple. I know how important it is to have your contacts consistently on all of your devices, especially if you need stay in touch throughout the day. I will do all I can to help. Looks like you have configured correctly the things, but synchronization may have just gotten hung up.

  One of the easiest ways we can try to kick start things must simply sign your Mac off iCloud and then again to make a new connection. After a few minutes, the contacts should begin to update. To do this, you can open your system preferences, click the iCloud and click Disconnect. Your Mac will give you the option to keep or remove certain information. Whenever the option is available, do not forget to click on "continue on my Mac.

  Once you have disconnected, go ahead and reboot then reconnect and give contacts for a few minutes to download and update.

  If they are not always appear, while he would have to do is go to iCloud on a computer using this link: iCloud.  When you are there, click on Contacts and see if they all appear correctly there.

  The entire community is here to help.

  -Best regards-

• Playlist running different order on iPhone and iPad

  This question has frustrated me before I have only accepted, but now I need to get it sorted.

  I just create a new smart playlist on the MAC (most recent operating system, etc.), there only about 15 titles at present.

  My system is set up so that my iPhone and iPad automatically synchronize with Mac, etc...

  I have the Iphone and the new playlist is there but all the tracks are in a different order, not an i want and colleagues that the iPad is also different once again (it's different for Mac and iPhone) so now I have a playlist with three totally different playing order... why this happens, and what is the solution please...?

  THX

  John

  Am I the only one having this problem?

  THX

  John

• trying to get my messages text passed between my iPhone and iPad

  I try to get my messages text passed between my iPhone and iPad.  The phone asking me to enter the 'code' shown on my iPad.  Howeve, no code appears.  How should I proceed?  Very frustrating!

  < re-titled by host >

  Both devices must be signed with the same identifier Apple and the devices must be unlocked for the code appear. After checking both are true I suggest you try a reset (two aircraft): press and hold the sleep/wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears. -Note: no data will be lost. Then try again.