IPhone requires data to use Apple Watch

Similar Questions

• I get a message on my watch "Device locked" Unlock iPhone to start using Apple Watch "so I have the odd from my iPhone, now I can't pair it again.

  I get a message on my watch "Device locked" Unlock iPhone to start using Apple Watch "so I have the odd from my iPhone, now I can't pair it again.

  Hello

  Follow these steps to clear your locked watch and re-pair it with your iPhone:

  • Connect your watch to its charging cable - with power connected.
  • Hold down the side button until you see the cursor off the power.
  • Press firmly (IE more firmly than usual) on Power Off and then press erase content and settings.
  • Then re-pair your watch by using the app shows on your iPhone, choose restore backup when the possibility.

  More information:

  Set up your Apple Watch - Apple Support

  If you have forgotten the password for your Apple Watch - Apple Support

• the recommended screen is blank on the iphone 6 s for my Apple Watch

  the recommended screen is blank on the iphone 6 s for my Apple Watch also the Explorer screen is blank, I am trying to download other applications for my Apple Watch

  Hi Vickie - try the following steps:

  On your iPhone, go to: settings > Wi - Fi - switch on and connect to a wireless network, or;

  On your iPhone, go to: settings > cellular / Mobile data > put data at the top, then scroll down to the section titled "cell use / Mobile Data For" > turn on the setting to watch (Note: carrier charges may apply for data usage).

• Using Apple Watch - how do I constantly monitor my heart rate during exercise

  Using Apple Watch - how do I constantly monitor my heart rate during a workout?

  Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

  According to this link, it should be available - but I can't find it on my Apple Watch?

  Is there a setting that needs to be enabled on it somewhere? The only place where I can see the heart rate is in the menu looks and there are only a few seconds? and takes awhile to show the heart rate.

  Hello

  When you save a workout using integrated workout app, your heart rate will be measured continuously throughout the workout. During training, you can also choose what primary metric is shown on your dial, with choices including heart rate. At the end of the workout, the results include the heart rate data. Training sessions are also recorded in the implementation of the activity on your iPhone.

  During the workout, to change the main metric indicated on the dial of the watch, slide on the side on this subject. Depending on your type of activity, the choice may include: time, active calories, total calories, heart rate, rhythm, speed and distance.

  More information:

  Use of the workout on your Apple Watch - Apple Support

  Use the activity on your Apple Watch - Apple Support

  Health and fitness data from other sources, iPhone, and Apple Watch are also aggregated within the health on iPhone app. Combined data is reflected in the application of health dashboard, which adjusts the results to avoid any double counting of data from different sources.

  To see Apple Watch heart rate data and other sources (for example a Bluetooth chest monitor strap):

  -On your iPhone, in the application of health (icon has a red heart on a white background), go to: data on health (tab) > Vitals > heart rate.

  Data are displayed in graphical form (this can be added to the application of Health Dashboard by activating the setting here) as well as individual data points (via display all data).

• How we can use Apple Watch remote keynote on iPad?

  Hi all!

  I prefer to use Keynote on the iPad when I have a presentation. Can we use Apple Watch remote slides on the iPad? It is really practical if possible.  How can we do?

  Hello

  Yes - you can use Apple Watch (via the paired iPhone) as a remote to control presentations when the iPad is selected as the presentation on your iPhone device.

  To do this, use the Keynote Remote screen in Keynote for iOS:

  -L'iPad must be combined - as a presentation device - with Keynote on your iPhone.

  -Your iPhone must not be connected to an external monitor using an adapter or AirPlay.

  -You must not have a presentation open or playing in Keynote on your iPhone.

  To pair your iPad with your iPhone as a presentation device, follow the steps detailed here:

  Use Keynote Remote on your iPhone, iPad or iPod touch - Apple Support

  More information:

  Use Keynote with your Apple Watch - Apple Support

• Used Apple Watch problem

  I bought a used Apple Watch and it will not pair my Apple ID

  When I put my Apple ID appear this massage (apple ID can be used to unlock this Apple Watch)

  What should you do?

  Contact the seller and remove them the surveillance of their devices. If they refuse to do so return the watch and get your money back.

• Why can I not hear my 6plus iPhone calls after loading the Apple Watch? If I don't answer the iPhone instead of the Apple Watch for incoming calls?

  Why can I not hear my 6plus iPhone calls after loading the Apple Watch? If I don't answer the iPhone instead of the Apple Watch for incoming calls?

  Hello

  It can help to cancel your iPhone in a Bluetooth headset pairing, if it is currently associated with it.

  -On your iPhone, go to: settings > Bluetooth > tap the info "i" beside your headset > tap Forget this device.

• I bought a used Apple Watch, but I can't pair it

  I bought used Apple Watch and I can't pair it to my phone. He repeats to me it is linked with iCloud account and I can't reach the former owner. What should I do

  There is nothing you can do. You need to find the previous owner or return it to those who resell it to you and get your money back.

• How to use Apple Watch to take weight?

  A lot of people talking about how to use Apple Watch to lose weight, but how about the point of taking weight! Does anyone know how to use Apple Watch to take weight? It can track calories from the body, not the calories to burn track!

  Thank you.

  Yes, the shows follow the calories you burn. And it's good information, no matter what you try to do it. Apple Watch is not really to lose or gain weight. His focus is on getting in shape. It is not follow the weight at all. It follows the activity. Even if you want to take the weight, you still want to be active and in good health. Consult a nutritionist for what you should eat. Download an app like MyFitness Pal, which will allow you to set a goal and track your consumption.

• can I use Apple Watch bought in the United States in Australia

  My parents have decided to buy myself a Apple Watch in the USA when they go to spend the holidays in 2 weeks.

  I live in Australia, I'll be able to use it without any problem or do I have the Australian version?

  Will work. You will need at least an iPhone 5.

• Connect using Apple Watch does not

  I can not activate the feature that allows you to connect using the Apple Watch. When I check the box I get only a message stating that I needed to activate 2 factor authentication. But it is already enabled. Someone else also knows this problem?

  Thank you
  Oli

  Which iMac model do you have?

• Messages deleted from my iPhone always appear on my Apple Watch

  If I delete messages from my iPhone why always appear on my Apple Watch?

  Hello

  Delete the message in the Messages application is not synchronized between Apple devices, including the iPhone and Apple Watch.

  Messages must on the contrary be deleted separately on each device.

• iPhone SE & 6 problems with Apple Watch of pairing

  My iPhone 6 has done and continues to pair with Apple Watch; However, it will pair with the iPhone OS. It will start to pair up with the SE, but when you select the prompt to "Apple Watch configuration" message then indicating there is no pair. I have re-paired and unpaired with my iPhone 6 without any problem, so that tells me that there is a problem SE. I can pair the SE with my car and my macbook and I have no problem.

  Everyone knows this? I spoke with the Apple Support by phone, and we could not even solve the problem.

  I started having this problem with my new iPhone SE. The Apple Watch already associated with my iPhone 5 and just improved to the SE. worked for about a week and matching seems to have started to somehow lose the connection. I can see the bluetooth icon on the iPhone lighting several times as if detected his watch but nothing. I'm trying to pair with the camera on the iPhone and place the watch in the viewfinder does nothing, it does not detect read / that sound here. I also did the manual of twinning with the code and the code never happened on the watch. I even reset the watch and phone and nothing.

  Someone at - it advice? I'm all ears.

• Parsing XML and get the required data only using PLSQL

  Hi friends,

  I have a XML data

  < MAJOR_LINE >

  < LINEID > 143424538 < / LINEID >

  nom_element < ITEMNAME > = < / ITEMNAME >

  < > 78245 ITEMPATH < / ITEMPATH >

  < QUANTITY > 10 < / QUANTITY >

  < MINORLINE >

  < LINEID > 143424799 < / LINEID >

  TCC_ITEM_NAME < ITEMNAME > < / ITEMNAME >

  < > 78245 ITEMPATH < / ITEMPATH >

  < QUANTITY > 10 < / QUANTITY >

  < MINORLINE LINEID = "123456_line_id" xmlns = "xxyyzz" >

  < message > < / message >

  < status > < / status >

  < covered_Product_line_id > '123_coveredProductLineID '.

  < / covered_Product_line_id >

  < itemName > < / itemName >

  < quantity > < / quantity >

  "< service lineId ="456_service_line_id">."

  "< covered_Product_line_id >"123_coveredProductLineID"

  < / covered_Product_line_id >

  < productAttributes / >

  < itemType > < / itemType >

  < itemPath > < / itemPath >

  < coveredProducts childProductLineId = "" / > "

  < / coveredProducts >

  < parentCoverage / >

  < / service >

  < / MINORLINE >

  < / MINORLINE >

  < / MAJOR_LINE >

  I want to extract only the Covered_product_line_id and the Service_line_id of the above XML format, these data can come from any where in the xml file and the xml can be any length.

  First we need to find the covered_product_line_id and the service_line_id associated with line_id, (as I pointed out in bold) here only a single pair i showed, but it can be in any number. (Note the line_id is inside the tag).

  #PLSQL

  Help, please.

  Thanks in advance

  Hey Odie,

  Me do string literal too long error:

  Select x.*

  from xmltable)

  XmlNamespaces(default ')

  , ' for $i in //serviceLine

  , $j in $i / coveredProduct

  Returns the element r {}

  $i / lineId

  , $j/childProductLineId

  }'

  from xmltype (')

  45146937

  N20

  1

  63090598

  CON-S

  1

  SNT

  UCS - IOM

  342544294

  N20-FW012

  342544295

  342544294

  UCS-IOM2

  1

  N20-C6508-UPG:

  45146937

  CON-S

  1

  SNT

  342544295

  N20-FW012

  1

  N20-C6508-UPG:

  45146937

  CON-SN

  1

  SNT

  342544296

  FET - 10G

  16

  N20-C6508 - UPG:U SC EXPERIENCE

  342544297

  UCSB-5108-PKG-FW

  1

  N20-C6508-UPXPANSION O

  342544298

  N20-CBLKP

  2

  N20-C6508 - UPG:0 - CBLKP

  342544299

  N01-UAC1

  1

  N20-C6508 - UPG:N01 - UAC1

  342544300

  N20-CBLKI

  1

  N20-C6508 - UPG:U HC EXPANSION OPT: N20-CBLKI

  342544301

  N20-FAN5

  8

  N20-C6508 - UPG:U HC EXPANSION OPT: N20-FAN5

  342544302

  N20-CBLKB1

  6

  N20-C6508-UPG-CBLKB1

  342544303

  N20 - CAK

  1

  N20-C6508-OPT: N20 - CAK

  342544304

  UCSB-B420-M3-D

  1

  N20-C6508-UP-B420-M3-D

  63090594

  CON-SNT-B420M3D

  1

  SNT

  UCS-UC-E5-4617

  342544305

  UCS-ML-1X324RY-A

  342544306

  342544305

  UCS-UC-E5-4617

  2

  N20-C6508 - UPG:PU - E5-4617

  342544304

  CON-SNT-B420M3D

  1

  SNT

  342544306

  UCSRY-A

  2

  N20-C624RY-A

  342544304

  CON-SNT-B420M3D

  1

  SNT

  342544307

  UCS0MS

  1

  N FIO-1600MS

  63090595

  CON-SNT-FIOB16MS

  1

  SNT

  342544308

  N2KD

  4

  N20-C6LKD

  342544309

  UCSB-HS-01-EP

  2

  N20-C65B-HS-01-EP

  342544310

  N1K-VSG-UCS-BUN

  1

  N20-C6508 - UPG:U-BLA1K-VSG-UCS-BUN

  342544311

  VSG-VLEM-UCS-1

  1

  N20-C6508 - UPG:U BLN1K BUN: VSG-VLEM-UCS-1

  63090596

  CON-SAU-VSGUCS

  1

  SAU

  342544312

  N1K-VLEM-UCS-1

  1

  N20-C6508CS-BUN: VMW N-UCS-1

  63090597

  CON-SAU-VLEMUCS

  1

  SAU

  342544313

  UCSB-ACDV

  2

  N20ACDV

  342544314

  R2XX-DMYMPWRCORD

  2

  PWRCORD N20 - C6

  ')

  columns for the ordinalite seq_id

  , path number child_product_line_id "childProductLineId".

  , service_line_id number path "lineId.

  ) x ;

• Is it possible to use the Apple Watch with bluetooth and data celular (for example in a remote area withouth wifi)?

  Apple Watch with bluetooth

  Hello

  Apple Watch can still be used in conjunction with the matched iPhone (which is based on cellular services) in places where there is no Wi - Fi network.

  The availability of some built-in and third-party applications can vary, depending on your cellular data settings and a network of cellular data speeds.

  If your question relates also to longer term, it is not currently possible to update the software on Apple Watch unless the paired iPhone is connected to a Wi - Fi network.

  Some built-in functions of Apple Watch can still be used even when the pair iPhone is not available via Bluetooth or Wi - Fi.

  More information:

  Bluetooth and Wi - Fi on Apple Watch

  Use Apple Watch without her sister iPhone - Apple Support