iPhone Trusted Network Detection

Similar Questions

• my Iphone is only detected by Windows, not Itunes more

  Hello
  I have the problem, it was presented after that I stopped and restarted the Apple Mobile Device service...
  I'm on Windows XP

  I did this operation because my Iphone 4 was not detected by windows, but only by Itunes,
  and given that this message is popping up (several times in a short period of time) the opposite happening, my Iphone is only detected by Windows, not Itunes more...

  My antivirus occurs Kaspersky Pure, no malware or virus... I scanned my computer and corrected the registry problems using RegCure which was supposed to fix this error (0xc06d007e), but I still get the error message no matter what...

  If you have a solution or advice, I would be very grateful,
  Thank you

  Hi manuelfrulio,
   
  Follow the suggestion given in this link to fix the issue:
  iOS: device not recognized in iTunes for Windows
   

  If this is not enough, you may need to contact Apple Support Forums for assistance.

• Stall network detection

  Currently, I'm trying to understand how to implement a network dropout detector in my application.  I use HTTP and so often keep a socket opened for a long time and do a lot of things on it.  Therefore, a random network dropping out really hurts to ease of use and I need to address without delay as the BONE to cause a timeout.  I was wondering if anyone could share any advice or code on how best implemented it.  I know that Peter has mentioned something himself, of course anything either would be useful.

  I thought a lot lately about the different ways that I could approach this problem:

  The simplest way possible, in theory, would be a kind of timer.  I would like to start it at the beginning of any sequence of operations of e/s, and "kick after (possibly before) each successful socket read or write."  The problem is that there is no effective obvious way to do it with the BlackBerry API.  (at least not without coarse abuse TimerTask.)

  Another option would be to have a TimerTask that runs whenever the is open, controls a set of variables on regular intervals.  I would update these variables around every success in reading/writing, and it could make its conclusions on this basis.  Of course, this raises a lot of questions on what the TimerTask interval should be, when start/stop, etc..

  Any thoughts/ideas?

  For a general watchdog, I use RealtimeClockListener.  But he gets only a kick every minute which is probably too long for the detection of dropping out of your network.  But you can use it to make sure that your stall network Detection still works.

  Personally, I have a dislike of timers because they seem to be just the threads with time management, handling I can do myself.

  And that's what I would do in this case.  I understand that you don't need that level of detail, but I'll put it in other players who are maybe not as clever as you are.

  I would like to have a watchdog thread, in a shared storage (probably RuntimeStore), all the time.  It has two States, while waiting for a timeout and idle.  In both States, she waits on the synchronized object StallDetection (I just made that name, it's just an object).  He uses wait/notify on this object to tell the Thread to do some work.

  This thread has two special methods, startTimeout() and cancelTimeout().

  Use Thread will startTimeout on this thread, through Assembly and time-out interval.  This startTimeout method will set the timeout and save the connection object, and then notify the StallDetection object.  This will give the wire in life, ii will find that it has a connection, but the timeout did not, then he will change his timeout so that he wakes up in the time limit.

  Now, there are only two possible situations:

  (a) the network Thread called cancelTimeout to cancel the timeout, because it has a good answer.  cancelTimeout clears the connection just waiting for the Thread.  When the thread wakes up, he'll find the elapsed wait time, but there is no connection to cancel, so it will be simply define another timeout, in the distant future and wait again.

  (b) the network Thread is suspended and does not cancel the timeout.  Then the Thread will wake up and see there is a link to cancel and cancel.

  It is essentially an implementation of a timer, without start-up costs and stop all the time.  I think it's better in your situation where you have a network of Red wire all the time.  But perhaps not an ad hoc http connection.

  Rather than use the two methods on the Thread, it should probably put up a model of the observer and so could be useful for a number of other situations.

  I would use the RealtimeClockListener to just check this thread is alive (isAlive()), then start it again if not.

  I would be interested in other options if people have other ideas and of course improvements on this!

  And I hope this helps.

• Suddenly "not (wireless) networks detected.

  Hi guys,.

  So I was on my laptop this morning (have had and used WiFi for over a year without problem) and suddenly lost my wireless connection. I'm as Windows 7 64-bit family.  At some point, there are still about 10 connections available wireless - mine and neighbors. Suddenly, none are detected at all.
  -J' turned off the Windows Firewall (only firewall I have). There is nothing.
  -J' I unplugged my modem and router and reconnected them and restarted my laptop. Still no networks.
  -J' checked for driver updates (everything was up-to-date).
  -I can connect to my WiFi on my iPhone and on other computers in the House. So given that and all the other networks I see normally cannot be detected or the other, I think that the problem is with the computer itself.
  -J' also tried a system restore, but it is on the "restoration of the system initialization" forever without actually doing anything.
  -I can also connect to the internet on this laptop if I plug the cable directly into it.
  Any ideas what's happening here? I searched all morning through similar topics but have not been able to solve the problem. Thanks for any help, that all the world can offer.

  On my laptop, I knocked together the following keys: fn (function) + f8. This change wireless power. For some reason, it worked contrary to right click and disable wireless manually. My friend suggested this because he had the same problem and it is solved for him also.  Your laptop can use a different combination of fn + f_. No idea why this worked or if it will work for everyone, but I've tried everything else and it instantly solved the problem for me anyway...

• Issue of carrier and Iphone compatible networks

  So I am currently on AT & T, but I want the freedom to go to any provider I want, so I'll buy an Iphone 7 + from the outset. I looked at a link at the bottom of the order page and it said something like 'see what your phone is compatible with the networks' and the way I read it if I buy a Sprint or Verizon phone they are retro-compatible with AT & T and of T-Mobile networks, but if I buy an AT & T or T-Mobile version that will not work for 2 other carriers Sprint or Verizon? Can anyone help clarify? I don't want to buy a phone that does not work on my current provider, but I also want the ability to switch to any carrier I want. Thanks in advance, Josh

  The AT & T and T-Mobile models do not have a CDMA radio so if you are in an area where there is no LTE and Verizon you phone won't be able to connect.

• iPhone 6s cannot detect Canon camera wifi signal

  6 s iPhone, OS 9.3.2. This phone cannot detect any Canon EOS 6 d wifi signal after that I turned on the wifi of the camera. My previous phone iPhone 6 has been able to detect it.

  You can try the following steps

  On your Canon 6 d:

  1. go to WiFi settings

  2. turn on your Wifi

  3. go to the WiFI function

  4. Enter your nickname

  5. Select connect to the smartphone

  6. Choose mode camera access point

  7. Select easy connection and then you will get key SSID & encryption

  On your iPhone 6s:

  Download this app https://itunes.apple.com/us/app/eos-remote/id565839396?mt=8

  1. turn on your WiFi

  2. choose your camera WiFi

  3. Enter the password (the password = camera encryption key)

• MI, iPhone 4S no detecta don't redes wifi

  Hola.Tengo an iPhone 4S that I worked perfectly until a bright idea to fornuis 2015 tuve finals an iOS 9. Habia visitado diverse web pages to see if the podia traer algun problema/s en mi device type change y todas decian than iOS 9 worked correctamente en el iPhone 4S.

  Actualice y entonces descubri than mi movil no muy don't redes wifi. Decommissioning of United Nations immediately did an iOS than por unos dias allowed Apple, el 8.4.1, there as long as I have currently. Barcelona el problema persists. The parece Cuando me detecta don't redes wifi y soy capaz conectarme an ellas, aunque no suele permanecer conectado 1 minuto mas. The mayoria of las veces is is buscando sin find none. Does control to no can not conectarme voy al centro Cuando (deslizando el dedo hacía arriba abajo) y desactivo el wifi con the intention is to apprehend a activar, pero el device is is pillado, is magnitude y tengo than reiniciarlo. Tras volver has encenderlo, the mayoria of veces el "boton" del wifi is sombreado y no me already himself, tampoco mediante clamp.

  Como podreis understand esto acarrea some problems, como as hasta hace a by of weeks (to milagrosamente me was una solo mientras loading) wearing casi 30 weeks sin realize una copia backup. O algun my por el reason than sea uso red 3G a poco mas lo debido, last days of said unless my is me acaban los datos y estoy como TR no internet had.

  hace 4 Años as compre el Móvil, of primera mano, y comprendo Québec are esta viejo, y tengo the intention of comprarme any in a futuro proximo. Pero realmente're fastidioso cuanto menos as por una ocurra algo asi software change.

  In su momento hooked soluciones a mi problema, pero no none against or a con nadie a problema similar al mio. Hoy me dio por nuevo buscar y esta vez TR against a con alguien a problema muy parecido, in este foro aqui, asi that me he animado a comentarlo.

  A saludo thanks to photos

  Hello! Gracias por publicar in las Soporte communities of the Apple. Hemos lanzado una nueva Comunidad of Apple support in Spanish. If you interesa participar, registrate, encuentra una respuesta o publica una pregunta sober los productos y servicios of Apple that mas you interesen. Haz click in este enlace para el sitio en Español visit.

• iPhone face-down detection

  I just got an iPhone s. 6, just a quick question. At work, I have my phone hidden under a couple of reason papers is not alllowed to text. I noticied that my phone lights when I get a text, but I can hear it vibrate. Because of the new face of the iPhone down detection? I know because I have previou had the iPhone 6 and kept under documents at work but I could tell the screen turned on when I received notifications.

  Hello jessk456,

  Thank you for using communities of Apple Support.

  Yes, if your screen is safe and its screen is not illuminated, then this is the detection likely face down, what's new in iOS 9.

  • Detection of face down to turn the screen off the power when you are not using it

  Download iOS 9.0 - 9.3.1 Information

  Take care.

• Satellite M300-D4316 - wireless network detected but cannot connect

  Previously, I could use LAN wireless on my laptop but last week because I signed up to a bluetooth connection, Wi - Fi connection no longer works.
  It can even detect a wireless network around me; I don't see every time when I try to connect, & it asks me to diagnose the problem & said something like "the signal is too weak.

  I'm sure that is not the problem of wireless service - all my friends can connect to him!

  What should I do?

  Maybe the wireless LAN tipped off?

  Try to press Fn + F8 to toggle wireless devices.

  Also make sure that the wireless switch is turned on in the front and the sides of the laptop.

• Satellite C660 - key FN and wireless network detection no longer works

  Hi people,

  As a result of a virus, I put my computer to its factory settings.

  I have however lost the use of the function fn (end?) of the keyboard since and therefore cannot control the lighting of the screen and so on via the F keys any longer.

  Also, my computer can not detect wireless networks more. I did all the required updates and checked the State of the wireless card, but still nothing.

  Any ideas?

  See you soon!

  Hello

  May I ask what system you have installed on this laptop?
  Is - this Windows 7?

  If you are using Windows 7, you need to install Toshiba Value added Package and Support Toshiba Flash Cards for utility work affects FN.

  I m nit course on the WLan driver because different C660-xxx supports various wireless network cards. Perhaps you could provide the name of the complete model of the C660-xxx
  This would facilitate the search for the Wlan driver.

• 10 Windows installed successfully on early 2009 Mac Pro Quad but no network detected

  I installed Windows company 81 on my Mac Pro without problem, using the WiFi Edimax EW-7711MAC of OWX adapter, which went very well under 8.1.

  I have upgraded to Windows 10 company, works very well, "sfc / scannow" gave rise to no error, but the card WiFi has only a beta driver 10 to win, and I can't detect all of the networks. The pilot has been out since August, seems if it was questions, he would have been fired and Edimax support did not have any major problem with the driver beta for me. I had to run commands for the visible card.

  Not sure if this is a gap in the Bootcamp drivers as I lost it scrolling and keyboard Windows functions or the beta for the WiFi card driver is at fault.

  Device Manager sees the adapter, shows in the adapters in the Panel, just no networks are detected.

  Can what version of the drivers for Bootcamp I use with an Early 2009 Mac Pro Quad to work with Windows 10? I saw some "hacks" on the boards, especially for the Macbook Pro. Curious to know if anyone has found a combination of driver that works with this model or as.

  

  

  Can you check if WiFi issues on Windows using boot camp 10 solves your problem of WiFi?

• Get the message that says that my iPhone wireless network does not meet the requirements of my network card.

  Adapter title: original network

  I use the network wireless from my IPhone and next to the connection, there is a message that says "the ability of your network adapter does not match the requirements of this network" it still works, but I don't know why I get this message.   The connection is blind.  The only thing I did differently is update my phone to 4.3.3

  Contact the iPhone support:

  iPhone Support
  http://www.Apple.com/support/iPhone/contact/

  Support forums:
  https://discussions.Apple.com/index.jspa

• Wireless NIC fail: no network detected

  I have two identical HP Pavilion G7, portable product #B5Z56UA #ABA, execution of Windows 8. Two nights ago, one of them stopped detecting my local WiFi network. I have 5 other devices that continue to detect & use the network wireless without problem, including the same model. The WiFi light is white (not in airplane mode). Cable connection works fine, but I need WiFi to work on it. Here's what I've tried so far:

  1. performance of the built-in Troubleshooting Wizard.

  2. update the Atheros, disabled/enabled the device driver.

  3. several reboots.

  4 downloaded the latest MS patches & updates the BIOS.

  5 spent an hour on live chat with an HP technician last night... He was no help at all and only told me to do the things that I've done and then he left on me.

  6. even tried a system restore to a point 3 weeks before.

  7. restarted the router & checked its configuration to ensure it was not blocking access.

  8. open the back cover of the laptop in order to ensure that the Atheros NIC is properly connected.

  So I don't think it's a problem with the software or drivers. As I said, it simply does not detect local, even if my laptop WiFi networks identical can pick up signals from LAN 3 in my neighborhood. Please help, or I'll have to go back to the store.

  HP sent a new wireless card. Atheros... I got it less than 24 hours after they said they would send it! I am of course very pleased with the quick action. I installed the spare part and the WiFi works again. The problem was a bad wireless NIC

• New installation cannot network detection

  I had to reinstall my Windows 7 Home Edition 64 on my laptop with 9 Parallels Bootcamp partition following an upgrade of the OS. This laptop is connected to my home network via an Ethernet bridge with two different Mac and a Windows 7 PC.

  Installation as described worked perfectly on my home network, in particular with the office also runs Windows 7 Home Edition 64 before the reinstall.

  On my laptop (correctly working over the Internet through the same Ethernet Bridge), when I go to the Control Panel HomeGroup and click on it, it tells me that there's no homegroup (and me to create an offer only no option to join a).

  On my desktop PC, when I go to the same homegroup, there is a (which has been existing for two years) and I have the password for it, but I can't use it on the laptop because it does not detect. Passwords are rejected on the advanced sharing options, and I hasten to add that, of course, the ' discovery network is ON "on both computers.

  In the computer laptop system properties, I selected as in the PC of WORKING group.

  Any information on how to resolve this situation would be really appreciated!

  Thanks in advance.

  Finally, I found a solution to make my software work on the network WITHOUT being able to restore the residential group (see above). I could write the paths to the files, I needed the PC, and surprisingly the PC will appear in the selection of network drive tree! But before you write paths, no way I could select them as you normally would by selecting them.

  So I'm happy, my software works, but my network on the Windows partition not although everything seems to be normal (it's what network stores tell me too)...

• My games freeze and I have to refresh the page, windows network detects problems with pakage 1.0

  Windows network diagnostics detects connectivity with windows version 1.0 package! IAM helpless! My games freeze and I have to keep refreshing page and its helppppppp frustrating!

  Hello

  Thanks for asking!

  1. what game are you talking about?

  2. are - what you're talking to online games?

  3 have there been recent changes to the system before the show?

  If you are referring to online games, I suggest to follow the link and follow the steps. Check if it helps.

  The problems of games online using Internet Explorer

  http://support.Microsoft.com/kb/2528246

  Reply back with the results. I'd be happy to help you.