iPod is connected got bright orange flashing, no cost? *

Similar Questions

• My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green.  Wifi continues to operate even when the light is orange flashing.  Anyone know why this is happening?

  My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green. Wifi continues to operate even when the light is orange flashing. Anyone know why this is happening?

  The next time you see the flashing light amber...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Express

  If you see a button update, click on update the firmware on the airport

  

  Otherwise, find status and click on the little orange dot it. A message will appear to say why the airport complained and suggest a remedy for the issue.

• My air led is orange flashing

  MY air game is orange flashing instead of stay green. What is the problem

  Wifi hotspot: understand and resolve a blinking amber status light - Apple Support

• iPod classic connects to the computer

  Hello

  I have an iPod classic, since 2005.

  It will charge from the grid, but when you plug it into the computer it does nothing... Does not make a noise, does not load... Nothing, only thing that happens is that when you disconnect the computer screen lights illuminates... tried all USB ports, still is not, tried 3 computers, does not work on any...

  so I tried 2 more iPods, an iPod classic in 2004 and it worked fine. Tried an iPod nano of 2007 once again absolutely worked well...

  really annoying me now that I want to sync music on the classic...

  tried resetting the iPod, tried to run in the other mode keeping the home button and menu, press the button home-and play... None of them worked either

  Jake

  When you "recharge sector" (which I assume means an adapter of any), are you using the docking cable that you use with the computer?  When you connect iPod from 2004 and 2007 iPod nano to the computer, you use the same USB docking cable used with the iPod in 2005?

  Is the power supply adapter ("hands") accomplice of old load powering FireWire supported, not USB load?  Accessories older load use FireWire instead of USB charging, which has a different voltage and uses different "pins" on the dock connector.  An iPod from 2005 (probably a 5th generation "video" iPod) to connect to the computer via a USB port, but it can recharge using the USB or FireWire power.

  If you can confirm that the port host USB cable to connect the iPod in 2005 is good, my guess is that the 2005 iPod dock connector will not properly connect to USB power.  It can be worn or damaged.  Therefore, it does not connect to the USB port on the computer.  However, it always connects to FireWire, so she received the adapter (which feeds the FireWire).

  Use a flashlight to look inside the iPod dock connector, to visually check for damage, corrosion, dust or debris.

• How much time does it take for my ipod to connect the itune after putting in disc mode?

  How much time does it take for my ipod to connect the itune after putting in disc mode?

  my ipod displays 'do not disconnect' for half an hour already, but my itune cannot always detect my ipod (as itune will pop up once I have connected my ipod normally).

  What is your real question?  Why you connect the iPod to your computer to disc Mode?

  In addition, it would be useful to know if you are using a Mac or a Windows PC?  If Windows, what version?

  If iTunes does not open automatically (when you connect the iPod), what happens when you run it manually?

• ITunes does not recognize when the Ipod is connected. Help

  I have an ipod classic and only recently (Christmas 2015 day) itunes has ceased to recognize when my ipod is connected to my laptop. However, I know I tried three cables work because the ipod screen shows that it is connected and my laptop opens the file for my ipod, but this does not add to the music on it. How can I my itunes to work again?

  Thank you.

  

  It's what charge my laptop when I connect my ipod instead of loading of itunes.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• My iPod shuffle 4th generation yellow light flashes. What does that mean?

  My iPod shuffle 4th generation yellow light flashes and I can't find this in the manual that comes with it, or in the manual online more great.  What it means when the yellow light flashes. ??

  May be the battery > iPod shuffle (4th generation): check the status of the battery

• HP Laserjet 1320 orange flashing, fails to print on Windows Vista

  original title: orange flashing, fails to print

  HP Laserjet 1320 - two episodes of persistent production (almost - some only wingdings) blank paper after normal printing.

  I stopped this by output, turn the printer off.

  Now orange flashing only, does not print at all.

  Have you tried putting off tension, even with the computer and have run tick - found Nile.

  Thank you very much.

  Hi RosyJay,

  (1) you get an error message?

  (2) remember to make changes before this problem?

  
  Method 1: run the printer troubleshooter, see the link below

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 2:  Print a test page, see the steps mentioned in the link below - you can print a test page to check if a printer to print graphics and text correctly. A test page also displays information, such as the printer name, model, and version of the software driver that can help you troubleshoot printer problems.

  A test-print page
  http://Windows.Microsoft.com/en-us/Windows-Vista/print-a-test-page

• 1320c light orange flashing - error will not print

  Orange error flashes on my 1320c printer. When I turn on the printer, everything looks OK. Then, a few minutes later the orange error light flashes.

  I tried to print after turning on - before slight error could have lights... done printer looks like it was a gear to printing then stopped and orange flashes.

  I wonder if it is the fuser unit? I've checked everything. Fuser is not hot - which made me think that it wasn't heat. How can I solve this problem?

  Printer is around the age of 16 months. Use of light.

  I can't find 'reset button '. Nothing like that inside the side door.  You kindly would tell me where exactly it is?

  Thank you.

• Guest OS (Win XP SP3) blue screens in Workstation 7 when the iPod is connected

  Windows SP 3 Guest OS blue screens to whenever an iPod is connected.  Host operating system is Win 7 x 64.  Workstation running 7.  This is the dump of the guest OS:

  Debug version of Microsoft Windows (R) 6.12.0002.633 X 86

  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file

  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRVC:\Symbolshttp://msdl.microsoft.com/download/symbols

  Executable search path is:

  Windows XP Kernel Version 2600 (Service Pack 3) MP (2 processors) free x 86 compatible

  Product: WinNt, suite: TerminalServer SingleUserTS

  By: 2600.xpsp_sp3_gdr.100216 - 1514

  Computer name:

  Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055d720

  The debugging session: Thursday, April 22, 2010 18:31:12.629 (UTC - 07:00)

  System Uptime: 0 days 1:08:37.127

  Loading the kernel symbols

  ...............................................................

  ..............................................................

  Loading user symbols

  Loading unloaded module list

  ................

  *******************************************************************************

  • *

  • Analysis of error checking *.

  • *

  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  100000 1 error checking, {8, 2, 0, babd35af}

  Probably caused by: usbuhci.sys (usbuhci! UhciAbortAsyncTransfer + 4f)

  Follow-up: MachineOwner

  -

  ---

  0: kd >! analyze - v

  *******************************************************************************

  • *

  • Analysis of error checking *.

• *

*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)

An attempt was made to access an address pageable (or completely invalid) to a

application interrupt level (IRQL) that is too high.  It is usually

caused by drivers using a wrong address.

If the kernel debugger is available, get a stack backtrace.

Arguments:

Arg1: 00000008, referenced memory

Arg2: 00000002, IRQL

Arg3: 00000000, value 0 = read operation, 1 = write operation

Arg4: babd35af, address memory

Debugging information:

-

---

READ_ADDRESS: 00000008

CURRENT_IRQL: 2

FAULTING_IP:

Usbuhci! UhciAbortAsyncTransfer + 4f

babd35af 8b4e08 mov ecx, dword ptr

CUSTOMER_CRASH_COUNT: 8

DEFAULT_BUCKET_ID: COMMON_SYSTEM_FAULT

BUGCHECK_STR: 0XD1

Nom_processus: System

LAST_CONTROL_TRANSFER: from babd11fb to babd35af

STACK_TEXT:

ba5a9c74 babd11fb 89aef9dc 895ce690 89520588 usbuhci! UhciAbortAsyncTransfer + 0x4f

ba5a9c98 ba52948b 89aef9dc 895ce690 89520588 usbuhci! UhciAbortTransfer + 0x3d

ba5a9ce4 ba529753 89aef028 80546afc 89520410 USBPORT! USBPORT_DmaEndpointPaused + 0 x 263

ba5a9d10 ba52bb7c 89aef028 80546afc 89520410 USBPORT! USBPORT_DmaEndpointWorker + 0 x 149

ba5a9d38 ba52f5ea 89aef028 89aef028 00000002 USBPORT! USBPORT_CoreEndpointWorker + 0x6d2

ba5a9d7c ba5281b0 89aef028 899fa020 00000000 USBPORT! USBPORT_Worker + 0 x 212

ba5a9dac 805cff62 89aef028 00000000 00000000 USBPORT! USBPORT_WorkerThread + 0x12a

ba5a9ddc 8054611e ba528086 89aef028 00000000 nt! PspSystemThreadStartup + 0 x 34

00000000 00000000 00000000 00000000 00000000 nt! KiThreadStartup + 0x16

STACK_COMMAND: kb

FOLLOWUP_IP:

Usbuhci! UhciAbortAsyncTransfer + 4f

babd35af 8b4e08 mov ecx, dword ptr

SYMBOL_STACK_INDEX: 0

SYMBOL_NAME: usbuhci! UhciAbortAsyncTransfer + 4f

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: usbuhci

Nom_image: usbuhci.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 480254ce

FAILURE_BUCKET_ID: 0xD1_usbuhci! UhciAbortAsyncTransfer + 4f

BUCKET_ID: 0xD1_usbuhci! UhciAbortAsyncTransfer + 4f

Follow-up: MachineOwner

-

---

Hello

Do you still see the problem if you select "enable support for USB 2.0 high-speed devices" in the GUI?

Thank you

Doug

• Orange flashes in exported movies

  I'm using Premiere Pro CS3 on a PC running WIndows XP sp2 with P4 3gig of RAM. The graphics card is a RADEON x 300 series.

  My source for videos is a Panasonic SDR - H200 Palmcorder hard drive that creates. Files MOD by using MPEG2 compression.

  I just change the file extension. MPG to import files in first - not other than that of the conversion.

  When I export movies using Media Encoder I usually get one or more short orange flashes in the video. Flashbulbs fill the entire screen for a fraction of a second, so I would say for maybe 15 images.

  Here are the specifications on the source of the video:

  Type: MPEG Movie
  File size: 1.7 GB
  Image size: 704 x 480
  Sampling: 704
  Frame rate: 29.97
  Total duration: 00; 25; 47; 01
  Average rate: 1.1 MB/second
  Format of the pixels: 0,909

  and here is the summary of my encoder settings:

  Export to MPEG2

  MainConcept MPEG video Codec video

  NTSC, 720 x 480, 29.97 frame [fps] non‑drop, lower, quality 5

  VBR, 2 Pass, Min 2.50, target 4.20, Max 6,00 [Mbps]

  I added a title again with a transition iris on the video source at the top and a dip to black at the end other that I use all the video effects to all cut down for a seven-minute segment of the video source.

  I know there are a lot more settings for the encoder, but I left the default values, because I'm not sure of what they are doing yet.

  Here is a link to the video exported on YouTube:

  http://www.YouTube.com/watch?v=JNumHDFowg8

  There is an example of the flash at 0:15 and again at 0:20 on this specific issue.

  Can any suggest a reason for this and point me in the right direction to fix it?

  Thank you!

  While you can SOMETIMES use MPEG as a source of edit (other people cannot get these work at all) your BEST source edit is DV AVI type 2

  Try to convert your files to change and see what happens

  http://PremierePro.Wikia.com/wiki/FAQ:How_do_I_convert_my_files % 3F

• TC orange flashing: no internet connection and no DNS server.  We reset and reconnected several times.  The Wifi doesn't connect or internet not connecting

  We got a new TC yesterday and replaced our old.  We followed the instructions in the Quick Start Guide.  And we either do not have internet and green - or we have internet and the light flashes in orange.  We reset and rebooted several times.

  What it is connected to? Often, you need to reset a modem connected (that is, pull its power for 20 seconds) the modem to connect the new device. If the light is blinking orange error, you should be able to see what this indicates using the Airport on your Mac.

  Matt

• impossible to connect or reset orange light flashing

  I read 100 amber streetlights, but have not met my situation at the moment.

  Flashing orange light on my 1470 time capsule.

  It does not connect to utility

  It will not be reset in any shape

  It has been cleaned, its is not overheated, it has a lit solid when modem connection.

  I read the possible motives of questions but no connection I can't even help out at this stage.

  Very expensive paperweight?

  Thank you

  Matt

  Have you tried to use the reset on the back? I believe that the orange light is a configuration problem - I get on mine when the network has changed and there is a configuration problem.

  • Reset to a base station AirPort FAQ - Apple Support

  I used a soft reset, which resets the SSID or connects via a cable, and then allows me to run the utility to reset the configuration.

• Xperia Z2 orange flashing led when it is connected to the magnetic charge lead

  Hey guys. I bought this phone off of a friend. His three months and works very well. But the other night, I accidentally put the magnetic port on the back and the phone is completely dead. I panicked and I tried every possible combination. I finally got a red when I plugged it into the microusb port. He turned in 10 minutes as usual.

  Now, whenever I have fix the magnetic cord (correctly) I get a flashing led orange and the unit charge at all.

  What is the flashing orange led average? Warranty covers the magnetic port? I hope someone can help me

  Hello everyone. I have problems with the magnetic charge on my Z2 port. He simply not to charge the device. He also was heat when he was in charge via USB. Sometimes, it would not even load!

  I was trying to just live with it until one day the phone turned off and never started upward for about a day.

  I knew at that stage he had no choice but to request an RMA number for these issues.

  When I called to tell them my problems, I told them specifically 'THERE IS a PROBLEM WITH THE MAGNETIC PORT', 'THE PHONE REFUSED to LOAD SOMETIMES' and 'THE PHONE HEATS DURING CHARGE'.

  The representative on the other end told me several times that he understands the problem and they will be addressed when he arrived at the repair shop.

  So, I packed the phone upward and expelled from Ontario (shipping cost me $40) and thinking that once he comes back, it'll work like it should.

  ---

  It's where I've never been more wrong.

  I'll be back on the phone today and it opens as soon as I could.

  First thing I did, is trying to turn it on. Absolutely nothing. No light, no low battery screen, nothing.

  So when I got home, I plugged the thing in a USB AC charger. The first 10 minutes, that there was only one red LED and nothing else.

  After 10 minutes, I could see the green of the battery on the screen.

  Again 5 minutes later, I was able to turn the phone on. He was sitting at 2%.

  What makes me believe that the phone was left or COMPLETELY discharged before shipping. These people in repair facilities don't know how harmful it is for a battery to be discharged to comepletely?

  ---

  The second and most outrageous of the thing is the main reason for the phone was sent he was not yet fixed!

  I tried to plug in the charger magnetic port (with a spare cord, as well as the docking station) and the phone does EXACTLY the same thing!

  In fact, it is an exact quote from that work says:

  "THE PHONE IS IN CHARGE AND WORKS WELL. "PLEASE SEND TO THE CABLE USB AND CHARGER IF PROBLEM P-<- they="" didn't="" even="" finish="" the="">

  "Software update, direct call, past quality control."

  I am so totally outraged and disgusted with Sony now.

• Orange flashing on TC - connected very well...

  I have a Time Capsule 3 to. The yellow light flashes. Everything is connected. Works very well. Mac OS X El Capitan. Airport utility sees not the TC check error and have it repaired. Watch greyed on TC silhouette with yellow Triangle icon. You are looking for assistance.

  PS - wrote this question on the network during the show. Proving seamless connectivity.

  Have you tried clicking on the yellow Triangle?