iPod screen won't go to the homescreen tried restart did not work

my ipod touch generation 5 restart I tried from 4 to restart when a black screen after I was on who's who and now I can't go back to my home screen normal my screen is black it turns on when I take my volume buttons and my button poower andi will still get the black screen help

Have you tried to press the sleep and the keys to the House for 20-30 seconds? Once you see the silver Apple, let go and let restart

Tags: iPod

Similar Questions

I really hate this version 23.0 requires me to have the band to tabs. I want to remove it. I tried to install version 22 of the archive, but it did not work.

I rarely use tabs; When I work, I prefer individual browser windows. For a single window without tabs, tabs band is clutter and space wasted. Previous versions of FF has allowed me to remove the tape to tabs in the options. Now on v.23 I can't. How very, very boring.

I tried to install the previous version, v.22, from the archives, but it did not work. I would be grateful a way to remove the band to tabs in v.23, or further instructions for down to v.22

Thank you.

The following may not be the only or most effective way to get the view you want, but that's what I saw recommended so far.

You can ban the entire tab bar, or when only several tabs are open, by using a setting in the Tab Mix Plus extension.

Please see this answer for more information: https://support.mozilla.org/questions/963676#answer-464257

Tab Mix Plus extension: https://addons.mozilla.org/firefox/addon/tab-mix-plus/

my iphone 5 works if connected to my charger, when I unplug it it stays on for a minute and then turns off, I can activate it after that but it turns off again. you wonder if it's my battery. I have already restored the phone, but it did not work. Help

my iphone 5 works if connected to my charger, when I unplug it it stays on for a minute and then turns off, I can activate it after that but it turns off again. you wonder if it's my battery. I have already restored the phone, but it did not work. Help

Most likely, the battery is broken. With AppleCare +, a replacement of the battery is free. However, without AppleCare +, a replacement battery will cost $79.

Apple-Support - iPhone - battery and power: https://www.apple.com/support/iphone/repair/battery-power/

can I download u.a.c and re install instead of completely relative to the configuration of my system as the last 2 repairs did not work?

user account control.

can I download u.a.c and re install instead of completely relative to the configuration of my system as the last 2 repairs did not work?

http://www.Vistax64.com/tutorials/48893-user-account-control-UAC.html

Read the above info.

It can help you.

And this information about the repair facility

Read this tutorial on how to do a repair installation:

http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

See you soon.

Mick Murphy - Microsoft partner

CS4 on Windows 10 seems to be broken... at least I can't clone. Before that, Silver FX and the related add ons did not work. I would like to remove and re-install Photoshop CS4 on Windows 10, but I'm afraid that none of these upgrade CD I will work t...

CS4 on Windows 10 seems to be broken... at least I can't clone. Before that, Silver FX and the related add ons did not work. I would like to remove and re-install Photoshop CS4 on Windows 10, but I'm afraid that none of these upgrade CD I will work... they are all dependent on a previous installation. If I remove photoshop and try to use the CS4 install disc I have, it fails? Will I need to re - install Photoshop 5.5 and each single update since then go to CS4?

You need not install older versions in order to get the last update enabled. During the CS4 activation process, you can specify the eligible previous version (choose the oldest among a list, then enter its serial number). Choose any one you had just before CS4.

I want to use makeup but Lightroom CC doesn't have the old menu dropdown to select. When I tried to click on "Reset of the Lightroom settings" to restore the old presets, it did not work. Help!

I want to use makeup but Lightroom CC doesn't have the old menu dropdown to select. When I tried to click on "Reset of the Lightroom settings" to restore the old presets, it did not work. Help!

You must click on the Option where it says 'Black' and then you will be able to select soften the skin.

Where can I find the "import PDF dialog box.' I tried to reset the preferences, but it did not work.

Where can I find the "import PDF dialog box.' I tried to reset the preferences, but it did not work.

Try file > open, and select a pdf file.

I can't install the new application on my iphone 5s revel. I tried to install the update, and that did not work. I deleted my app and rebooted my phone and tried a clean install and that no longer works... Help!

I can't install the new application on my iphone 5s revel. I tried to install the update, and that did not work. I deleted my app and rebooted my phone and tried a clean install and that no longer works... Help!

Please see the post below updates on the issue of the revel facilities:

Problem installing Adobe Revel 2.3.2

My music is gone and the library.itl method did not work. Help, please!

I realized that all the songs in my library disappeared, with the exception of those that I bought. I have read a few older threads on people who have this same problem after an update and tried the steps (detected the itunes library.itl file, renaming etc.), but it did not work.

My music is all saved on my computer and an extra hard drive, but I have more than 20,000 songs and I need my playlists to my business events and the demo of sampling and that makes me desperate. Is there anyway that I can restore my itunes when everything was perfect without slipping literally 20,000 songs in itunes? not to mention those of CDs. thank you if it is not resolved I can cry really.

You say that you have a backup of your music, but you also have a backup of your library files? Your playlists are only in your file "itunes library".

I kind of suspect that you may have not followed exactly the instructions. When you install an update the iTunes application puts a copy of your old library file in the previous record of libraries with a date added at the end. It is essentially the only thing that has your playlists and a list of media in your media folder. iTunes creates a library update, then he calls "iTunes Library.itl" If this update procedure is not successful (and in most cases, it is) you can restore it by going to the previous iTunes libraries folder and make a copy of the latest library here (by date, you can see), rename the file by removing everything except "iTunes Library.itl" and what to put in the main folder of iTunes. Restart iTunes. If that really, really does not then your recourse to use the library files backup copies you hopefully takes place before that you did any kind of update software on your computer. It's triply critical if you use equipment on a professional basis because your business depends on.

If necessary, you can work your way through the previous libraries although they will not be updated. Me realize also that what you see in iTunes is only a list of what is in the file of the library and if you return to a library very old media are still in the media folder, but are unknown to iTunes because they do not appear in the old file to the library.

All of my toolbars disappeared. I tried to reset the default toolbars, it did not work. Tried to start in safe mode, it has not worked. Firefox won't let me download toolbars. Help!

All of my toolbars disappeared. I can not download toolbars. I tried the system restore, and it does not work.

This has happened

Each time Firefox opened

== I downloaded an update for windows

I can see the menu bar, the toolbars I've installed before are not like the norton toolbar and the points my toolbar. Firefox won't let me download again due to errors. I have updated java and the problem persists.

Blue screen on startup, the system restore / repair did not work?

Hi, I get a blue screen on startup and cannot start windows - with the error code x0000007E.

I followed the steps on http://support.microsoft.com/kb/958233#StartupRepair however runs the repair does not work, and did the system restore.

Will be saved my files / is there a way to fix this? Thank you!

Hello

You can save your files by putting the drive in another computer as a 2nd disk (best) or external
Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
Of course a real store of the computer or the manufacturer of your system can help to recover the files.

Or you can use a boot Ubuntu CD to back up data.

Use Ubuntu Live CD to backup files from your Windows computer dead
http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

--------------------------------------------------------------

Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites.

ZIP or download the content of the C:\Windows\minidump

Use SkyDrive download collected files and after shot/screenshot.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

-------------------------------------------------------------------------

Also this, so you can see the probable bluescreens.

Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html

===========================================================

The system has RAID? If so, it's also very suspicious.

This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
methods in the next message and then return to the if necessary troubleshooting tool.

Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
spyware/security programs.

When you get to the pilot and sections of the memory of the troubleshooter check the following message to
update drivers and memory test and then return to the troubleshooter if necessary.

BCCode: 7F 0x0000007E which is also 0x1000007E

Cause

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
interpret, you must identify which exception has been generated.

Common exception codes are:
- 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.
For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
the Microsoft Windows Driver Kit (WDK).

Solve the problem

If you do not have to debug this problem, you must use certain basic troubleshooting techniques.
- Make sure you have enough disk space.
- If a driver is identified in the bug check message, disable the driver or check with the
- Reference of the manufacturer for driver updates.
- Try changing video cards.
- Check with your hardware vendor for updates to the BIOS.
- Disable the BIOS memory options such as implementing caching or shading.
If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
(the address of the exception) must identify the driver or function that caused the problem.

If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

In case of exception code 0 x 80000002, the trap frame provides additional information.

If you do not know the specific cause of the exception, consider the following questions:
- Hardware incompatibility. Make sure all new hardware that is installed is listed in the
- List of Microsoft Windows Marketplace tested products.
- Service driver or defective peripheral system. A service driver or defective peripheral system can be
- responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
- and IRQ conflicts can also generate this error.
If a driver is listed by name in the bug check message, disable or remove that driver. Disable
or remove drivers or services that have been recently added. If the error occurs during startup
sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
in Safe Mode, you must start the computer by using the Recovery Console to access the file.

If the problem is associated with Win32k.sys, the source of the error may be a third remote
control program. If this software is installed, you can remove the boot of the computer service
by using the Recovery Console, and then by removing the offending system service file.

Check the system log in Event Viewer for additional error messages that might help identify the
device or the driver that generated the bug check 0x7E.

You can also disable memory cache BIOS may try to resolve the error. You should also
Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
For more information about these procedures, see the manual of your computer.

The error that generates this message may occur after the first reboot during Windows Setup, or
Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
space, reduce the number of files on the disk drive hard target. Find and delete any temporary
the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
contain fragments of file saved to disk scans. You can also use another hard drive with more drive
free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
* 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

----------------------------------------------------------------------------------------------------------------------

Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

MyEventViewer - free - a simple alternative in the standard event viewer
Windows. TIP - Options - Advanced filter allows you to see a time rather
of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html

Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

As examples:

BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002

or in this format:

Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

It is an excellent tool for displaying the blue screen error information

BlueScreenView scans all your minidump files created during ' blue screen of the.
death ' crashes and displays information about all accidents of a table.
Free
http://www.NirSoft.NET/utils/blue_screen_view.html

BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
However, there are other causes.

You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

You can try a system restore to a point before the problem started when one exists.

How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

-------------------------------------------------------------------------

Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

The log can give you the answer if there is a corrupted driver. (Does not work
tell all possible driver issues).

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

-------------------------------------------------------------------------

Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

-------------------------------------------------------------------------

How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233

Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htm

Understanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692

Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033

-------------------------------------------------------------------------

In some cases, it may be necessary.

The Options or Vista recovery disk Startup Repair

How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

my e drive won't read my popular dvd set, but did not work

can not play dvd does not read that the reinstalled dvd optiarc didn't always help ran set yet, it does not play, but he will play cd

Hello

Please make all below even if you have done some before as it is often the set of operations which solves
the question.

Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.

Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

Hope these helps.

Rob - bicycle - Mark Twain said it is good.

Dynamic region of the body of the function return query did not work

APEX 4.1
Oracle 11g
I have a report of dynamic fields according to the value of the different type of zone set element is body of pl/sql function, return query, see the source code of the region below.
declare
v_sql varchar2 (2000);
Start
IF: P2_BY = 'MONTH' THEN
v_sql: = 'SELECT ' | : P2_TYPE | ', SUM (JAN) JAN, SUM (FEB) FEB, SUM (MAR) MAR, SUM (APR) APR, SUM (MAY) MAY, SUM (JUN) JUN, SUM (JUL) JUL, SUM (AUG) AUG, SUM (SEP) SEP, SUM (OCT) OCT, SUM (NOV) NOV, SUM (DEC) DEC OF THE RPT_HOTEL GROUP BY ' | : P2_TYPE;
ON THE OTHER
v_sql: = 'SELECT ' | : P2_TYPE | ', SUM (Y2011) 2011, SUM (Y2012) Y2012, SUM (Y2013) Y2013, SUM (Y2014) 2014 RPT_HOTEL GROUP BY ' | : P2_TYPE;
Return v_sql;
end;
But "Missing expression" error when Save source in the region.
I checked the sql statement is valid in the sql command, and: P2_TYPE get the correct value.
If the generic column name 'use' then get the correct report, but the column name is random.
Please help solve.
Thank you so mcuh

Hi fac586,

I couldn't thank you more. Of course, read you my code and found that the design of table is not reasonable. in fact I just design for the demonstration of the prototype, so do not consider architecture.

I mean, it is that the problem has disappeared when I create a new page like this one, don't know how it happened. in any case what I need has been achieved, thank you very much for what you have done.

Here I paste my code for reference, that someone might need.
```
declare
v_sql varchar2(2000);
v_time varchar2(50);
v_for varchar2(30);
begin
IF :P4_TIME='MONTH' THEN
v_time := 'to_char(lodging_date,''MM'') MONTH';
v_for := 'to_char(lodging_date,''MM'')';
ELSE
v_time := 'to_char(lodging_date,''YYYY'') YEAR';
v_for := 'to_char(lodging_date,''YYYY'')';
END IF;
IF :P4_MEASURE='NIGHTS' THEN
v_sql := 'SELECT * from (SELECT ' || :P4_BY || ',VENDOR_NAME,' || v_time
|| ',count(entry_legacy_key) ROOM_NIGHTS
FROM HOTEL_EXPENSE GROUP BY ' || :P4_BY || ',VENDOR_NAME,' || v_for || ')
PIVOT (SUM(ROOM_NIGHTS) FOR ';
ELSE
v_sql := 'SELECT * from (SELECT ' || :P4_BY || ',VENDOR_NAME,' || v_time
|| ',SUM(APPROVED_AMOUNT) SPENDING
FROM HOTEL_EXPENSE GROUP BY ' || :P4_BY || ',VENDOR_NAME,' || v_for || ')
PIVOT (SUM(SPENDING) FOR ';
END IF;
IF :P4_TIME='MONTH' THEN
v_sql := v_sql || ' MONTH IN (''01'',''02'',''03'',''04'',''05'',''06'',''07'',''08'',''09'',''10'',''11'',''12''))';
ELSE
v_sql := v_sql || ' YEAR IN (''2011'',''2012'',''2013'',''2014''))';
END IF;
return v_sql;
end;
```
and checked

'Use generic column names (analysis of query during execution only)'

column of the report used PL/QL name
```
declare
v_sql varchar2(2000);
begin
v_sql :=  :P4_BY || ':VENDOR_NAME';
IF :P4_TIME='MONTH' THEN
v_sql := v_sql || ' :Jan:Feb:Mar:Apr:May:Jun:Jul:Aug:Sep:Oct:Nov:Dec';
ELSE
v_sql := v_sql || ':2011:2012:2013:2014';
END IF;
return v_sql;
end;
```

My website won't load properly in FF, but will be in IE - tried solutions - did not work

I have 2 (1 sites cloned from the other) that the two have worked well in FF - until about a month.
www.drydiapersplus.ca
(landing page loading correctly in FF - but loads correctly in Internet Explorer) and www.drydiapersplus.com (load properly)

When I try and open the site .ca - the left panel, the top panel and the right panel open properly - and the text in top... but none of the images load at the bottom of the screen in the Middle 1/2.

I tried to empty cache, I tried CTRL F5 (hard refresh) - and none of this works.

This is the .ca site this load IS NOT properly in FF (but fact in Internet Explorer)

"< a href ="http://s43.photobucket.com/albums/e361/sugerray50/?action=view & current = casite.png"target ="_blank">< /a >"

It's the American site that load properly in FF
"< a href ="http://s43.photobucket.com/albums/e361/sugerray50/?action=view & current = USsite.png"target ="_blank">< /a >"

edited by a moderator to fix the first two links of Hypertext - Ed

Currently, the .ca page seems, probably because you have a static image there instead of a Flash animation.

On the .ca, you use the full path in the EMBED tag? On the .com site, this path uses the secure HTTPS protocol. You could run a problem with the mixture of content of a domain security in the other domain. Try to bring it on the same domain or by using the same protocol used in the page.

Impossible to get MathCAD 13 to work on my desktop or laptop, both have Win 7. He seems to have loaded but will not start. Resolution of the incompatibilities by train did not work.

I know it's possible to run on Win 7, but it won't work on one of my machines. Whrn I click the icon, it says "incompatible".

Hi John,.

Given that the Compatibility Mode works not another option for you is to have installed XP Mode, if you run Windows 7 Professional or higher and your hardware can support virtualization.

http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-XP-mode

I hope this helps.

iPod screen won't go to the homescreen tried restart did not work

Similar Questions

This has happened

Maybe you are looking for