iPod touch installs as an unknown device, gives 43 error code

Similar Questions

• HP compaq 6730 b: unknown device on pci-bus code 28 / unknown device on Microsoft ACPI-Complia... (ACPI\HPQ0006)

  Win.7 bit 64 pro HP 6730 b

  Unknown device on Microsoft ACPI-compliant system code 28

  Unknown device on pci-bus code 28

  Hello:

  You need the driver for this device...

  This package contains the software that allows the HP Quick Launch Buttons, which are special function keys on HP laptops. This software works with the notebook models that are running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp49001-49500/sp49104.exe

• Security update for Windows XP downloads but fails during installation that gives 0x8007F0F04 error code

  Security update for Windows XP downloads but fails during installation that gives 0x8007F0F04 error code

  FixIt, reboot, try again not useful

  How can I get the security properly installed?  or what happens if I don't?

  Original title: 0x8007F0F04

  Hello

  1. what day you're talking about?

  2. what Microsoft fixit you talking?

  3. don't you make changes to the computer before the show?

  Please follow the steps from the link below.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/958051

• I tried to install gta iv and it installs correctly but it want allow me to play it gives an error code ws

  I tried to install gta iv and it installs correctly but it want allow me to play it gives an error code 10 ws and it don't work with my labtop.

  Try the various corrections in the connection of Rockstar and you should be OK, run the game.
  assuming that your graphics card is Nvidia 630 m or better.

  HP make several versions of dv6, and they use different graphics
  Two examples are inferior to.
  The AMD HD m 7690 XT graphics card is quite capable.

  Portable control review - HD 7690mXT

  Not as powerful as the HD7690m XT (or HD7690m), but still able to run the game.
  They do not have GTA4 in this review, but I guess that means, mixed with tweaks
  settings for most low for the stable game.

  Review of 630 m from NVIDIA

  .

• Canon Pixma iP1500 printer and it connect not gives an error code 20

  I have a canon Pixma iP1500 printer and it does not connect gives an error code 20?

  Hello

  1. If it works much earlier?

  2. did you make any changes before this problem?

  3. What is the exact message you received?

  I suggest to go through these steps and check.

  Method 1:

  This is due to the UAC. Disable UAC will help because UAC prompts the user the permission to continue, the time required to get the question and answer that cause the printer to turn it off.

  If you do not want to activate UAC you can call EnablePrinter when the capture of the EnablePre() event generated by the driver.

  Note: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  Method 2:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3:

  Uninstall the printer driver, download the latest driver on the manufacturer's website, install on your computer and check.

  Step 1: you can download the latest driver from the link below http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip1500#DriversAndSoftware

  Step 2: Uninstall the device from Device Manager driver.

  a. right-click on the icon my computer

  b. Select manage from the menu.

  c. Select Device Manager in system tools that are listed in the resulting display.

  d. right-click on the device.

  e. click on the driver tab.

  f. click on uninstall.

  g. restart the computer

  Step 3: Installed the downloaded printer driver and check out them.

• my copy of CS4 is not allowing me to open it, whenever I have it try state that the license is no longer works and gives an error code: 6. this problem occurs on my laptop works fine my office copy [from the same CD, etc.]

  my copy of CS4 is not allowing me to open it, whenever I have it try state that the license is no longer works and gives an error code: 6. this problem occurs on my laptop works fine my office copy [from the same CD, etc.]

  Exit code: 6, Exit Code: 7 Installation error - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  The problems with the Setup logs. CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to review your Setup logs

• Trying to install creative cloud, stops at halfway and gives me error Code: 1.

  Trying to install creative cloud, stops at halfway and gives me "error Code: 1'." When I looked at what that means, it tells me to uninstall, then try again. There is nothing to uninstall. I disabled my firewall and disable all security software. Even went to the properties to UNLOCK program to settle, giving permissions to all. Even as an administrator. Even tried in safe mode, nothing. Same mistake NEVER ONE TIME! Then I downloaded Adobe Assistant I think that another program... It installs and shows that the installed programs, but what that leaves is a folder on the desktop with the name of 2 programs, but there is nothing for them.

  Using the Support Chat from Adobe is the ONLY way it worked! It just took about an hour. But I insisted for them to take over my computer. There was much too much that they had to do, open, and delete stuff. They had to download additional software to try to solve it. They had mistakes throughout, but now installed InDesign Creative Cloud AND. As I said, ask them to do it for you because it's worth against the endless hours, I tried to resolve the question of my own, search the forums, make suggestions, without success. Once I saw my program PASSES the bar of 42%, I knew that they fixed. They will still open the program to ensure that it properly installed. If you highlight the contact on the Adobe site, answer a few questions and then click on NEED of EXTRA HELP. Then connect to the chat. TOTALLY FREE! And you just sit back and watch everything they do, for about an hour. How long approximately it is. But they know what they're doing for sure. As I said, I tried all the available on websites, forums, chats and connect them directly to my computer support, IS THE ONLY THING THAT WORKED they are awesome if you get someone who knows what they're doing, unlike only one, that I had later in the night, which had no idea. I've disconnected and got another person, which sets the creative cloud. Now the rep just fixed and installed InDesign. Save yourself the extra stress as if I was, because I was so frustrated! They are awesome

• Vista - Windows Update fails and defender gives the error code: 0 x 80080005

  Well, I downloaded Veoh Web Player and DivX player (with a driver package) almost the exact same time, so I don't know who caused the problem. (Guessing Veoh done.) I restored system which usually solves it for me and then uninstalled both programs and even if my computer is not nearly as slow as it was when they were both installed, it's always problems. Windows open frequently stops responding. As I said, the system restore only makes it better for a short time while longer I go without eating, the freezier my computer becomes. I also noticed that for about 2-3 days (after which my computer almost completely freezes and I have to startup repair) most minor cosmetic changes.

  I use Firefox, so the first change I noticed was that left side of the address bar in a small half circle in a regular square. Tiny. Then the scroll bars on all the programs I've used lost their Aero look and returned to normal, old style Windows. Eventually good menus click lose their new look, then all the start menu, and finally Windows Explorer stops working and all the windows, when not in use, become small tabs at the bottom of the screen. After that the computer hangs almost entirely.

  Each time I restart or system restore the first thing I see is a little box that says that a Windows host process has stopped working. Windows Update continually fails and Windows Defender gives the error code 0 x 80080005. What can I do? I looked for answers before coming here to help and what I read it looks like a downloaded driver can interfere with the host process, even if I uninstalled it (supposedly) all. Thank you.

  Applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. now to reset Windows Update by...

  How to reset the Windows Update components?
  [Access KB971058 via Internet Explorer only;] Run the difficulty in DEFAULT and AGGRESSIVE mode]
  http://support.Microsoft.com/kb/971058

  5. restart & test.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Adobe CC will not update my Photoshop and Lightroom for the new 2015 CC, it fails at 43% every time and gives an error code of 50

  Adobe CC will not update my Photoshop and Lightroom for the new 2015 CC, it fails at 43% every time and gives an error code 50.

  Hi Gregory,

  Please refer to the threads below to resolve the error code 50:

  Which is updated CC 50 error Code?

  Setup error - code error 50 creative cloud.

  You can also try to download the app from the link below:

  Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools

  * Be sure to read the important Instructions before downloading *.

  Kind regards

  Sheena

• Why my iPod touch only show as a device of internal storage from my computer and Explorer, not a player?  Uninstalled and reinstalled iTunes several times and still it persists.  I can only look at pictures not music

  I can't get my iPod Touch appears as a disk. It shows only as an internal storage device, and I only see photos under a DCIM folder. No drive letter is

  It's the way it is supposed to be. See recover your iTunes from your iPod or an iOS device if the media you want to extract the device there.

  TT2

• IPod touch installation problem

  I installed i-Tunes for IPOD Touch (8 GB) and had no probs - downloaded a few songs - IPOD, computer works fine.  Then when I went to charge IPOD, I received

  Blue screen * STOP: 0x0000007E (0xc0000005, 0x00000000, oxF89547c8, oxF89F44C4) error.

  Were also verbage as fatal error, memory dump, BIOS updates, disable memory options such as caching and shadowing bios.

  I restarted the computer and he recovered himself, but when I plugged the iPod in again, same problem, but with a little code to different stop within the parenthesis numbers.

  I have reinstalled iTunes, run analyses (from McAfee) on the computer, run all new updates on computer (by Microsoft), but still, it crashes when I connect iPod to the computer.  I'm afraid to plug iPod again for fear of the damage I can do to my computer.

  Help, please! My 10 year old daughter cannot use his birthday gift, until I fix this :-(

  I found the answer!  I had a Logitech computer camera to use Skype.  It turns out that although I had downloaded all driver updates, Logitech was not included in the download.  I had to go to the Web from Logitech website and download the driver directly from the site Web from Logitech.  Once I did, all my issues have been resolved.  Computer, iPod and iTunes worked fine since.

  Thanks for your help and advice.

• Cannot restore the ipod touch 6 connected to itunes, 10 39 windows error

  My ipod touch 6 is disabled. I had not yet synced to ITunes, you can't use icloud as location service is disabled on the ipod. Last option is to restore and update when you are connected to the pc (windows 10) and ITunes (latest version installed today). Get an error 39 - which relates to failure to remove photos on the Ipod TOuch - which I just can't do it manually because I can not enter the access code in iPod.  Has raced twice now restore with no result.

  Place your iOS device into Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.

  If the recovery mode does not work, try the DFU mode.

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  Try to restore on another computer

  To learn how to restore:

  iTunes: restore iOS software

• Installation of Canon PIXMA MG5200 Wireless Printer gives the error code 0 x 00000643 on Windows Vista

  Original title: Wireless Printer put in place

  Trying to install the scanner software etc. on my new printer canon PIXMA MG5200, already implemented successfully using WPS, while it was printing ok, error code 0200 0000 documents came along with a "a newer version of MP readers is installed for cancelled installation. Uninstalling now left me unable to reinstall the printer link with my laptop with the advent of error code 0 x 00000643 up - help what I did?  Vista Home is my OS. Our other laptop which runs on Windows 7 is still printing ok but also not load the software. Canon told me to ask you to clean the registry? ! If this is what is needed, how can I do this, and surely the problem repeats whenever I try to install again. I tried the system restore before I loaded the software and no change.

  Hi AlisonHamilton,

  It is sufficient to indicate the complete error message you receive.

  Method 1: You can see the steps outlined in the article below, which deals with a similar question

  Error message when you try to install a WSD printer on a Windows Vista-based computer after installing first attempt fails: "impossible Operation completed (error 0 x 00000643).

  http://support.Microsoft.com/kb/944960

  Method 2:  You can run the fixit available in the link below

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/en-us

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************

• USB Mass Storage Device gives me the Code 10 error. This device cannot start

  I have an external hard drive, Iomega Prestige 1 TB and one of the people at the school he fell from the top of the computer tower that resembled a fall of 30 cm, after it still worked, but then a few minutes later there not later he was still able to connect but it kept asking me to format it , so I wanted to try and find a way to get my data without formatting it. A day later I plugged the external hard drive, it started to beep for 5 min then it connected to the computer but unfortunately didn't show up in my computer, but he did it in the printer and peripheral. I checked my device manager and it showed a yellow explanation mark with the USB mass storage device. I went to properties and it says: "this device cannot start. (Code 10) "How can I solve this problem?

  Hi AntonioDavism,

  You can check if the following is useful.

  Method 1: Run the hardware and devices Troubleshooter and check if that helps.

  Method 2: Follow the steps in the below article mentioned and look for the question.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

• Important safety KB973565 update installation failure. No information about the error code: 80004005. Also, the installation of upgrade Office 2007 Ultimate. 1935 and 1310 error messages.

  COMPUTER: CPU & BIOS: Intel Core 2 CPU * address email is removed from private life *; The version of the BIOS/date: American Megatrends, INC. 1101, 07/02/2007
  System name: POLY595695; MFG: ASUSTek Computer INC.
  Memory: 4 GB
  HDD: RAID 5 with Intel RAID Controller: Intel ICH8R/ICH9R/ICH10R / / PCH SATA RAID Controller version 8.8
  ROM: version 6.0.0.1017
  3 Seagate 320 GB hard drives
  SYSTEM MODEL: P5B - E

  DUAL BOOT SYSTEM: Windows Professional XP & VISTA ULTIMATE SP2, Build 6002 6.0.6002 worm

  The RAID system is a failed drive so it's currentl status "degraded".  I installed two new discs and got a replacement 3rd on the way after the latest RAID driver ver. 8.9 to 8.8 for the Intel of current top technical issues site. According to the Intel site, we reported recurring and random disk failure with version 8.9, which they have not been able to reproduce in their laboratory, but say that returning to version 8.8 has solved the problem for users with this problem.

  WINDOWS UPDATE: Follow-up of the troubleshooting steps, but no information on the given error code, 80004005.  This security update is not constantly in the 2 months prior to the update of the change on hard drives or RAID driver.

  OFFICE 2007 ULTIMATE INSTALLATION: Installation product without incident until about 85-90% full, then stops citing Error 1935.
  Error Msg: "Error 1935. During the installation of the component {74FD3CE6-2A8D-0E9C-A01F-C8B3B9A1E18E} HRESULT: 0x800736B5. »
  System says then it restores changes and then gives the error messge "Error 1310."

  There is no answer to the 1935 specific or code for the 0x800736B5 to HRESULT error messages, but there are thousands of results for the 1935 error messages or 1310 General.  The actions proposed by these results are one) uninstall all earlier versions of Office, including the eligible upgrade software, I've done through uninstalling program and manually; (b) for .NET Framework 1.1 to repair or reinstall 1.1 or install version 2.0.  All THE proposed solutions have been tried, as the software was received on 08-11-09, but all have failed.

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner