IPS sensor report an event showing source ip 10.5.5.5 victim ip 0.0.0.0 - is 0.0.0.0 means a show?

Similar Questions

• A report that will show how a user has used the secure area?

  Hello everyone.

  I need to view a generated in the report on the activities of the Member section to securezone.

  The ideas are greatly appreciated.

  I've tried selecting the protected area (in the areas of Secure), click on action -> View Secure area usage report

  But it just displays: no data available for the period selected. no matter how to set the filter of time.

  Best regards

  Jones

  It seems that it is a duplicate to your message in this thread: is there a report that will show you how a user has used the secure area? . I will follow on this issue on the same thread.

• All AR Oracle seeded available reports what FDF shows values?

  Hello
  
  I would like if someone is aware of reports Oracle seeded showing values of de FACTO at the level header Transaction that can help eliminate having different demand for RICE.
  
  Please answer.
  
  Thank you.

  Nope

• Report do not show when the page is refreshing

  Hello
  
  I have a report of patient privacy and I have a column in the report at the end of TREATMENT DETAILS. When I click on DETAILS of TREATMENT and then move page command no 2. This page show me last visit treatment details report in a region and here I use the second area I add the current processing status. There is point four
  
  Checkbox name 1-disease
  2 - symptoms name box
  Checkbox name of 3 treatments
  medicine-4 Select name
  My first query of the region is

  select A.P_NO,A.P_NAME,B.DISEASE,B.SYMPTOMS, B.VISITING_DATE,B.TRET_NAME,B.MED_NAME,B.MED_COUNT FROM PATIENT_DETAILS A, PATIENT_SYMPTOMS B WHERE A.P_NO=B.P_NO AND A.P_NO =:REQUEST

  using these four point I fill in the details of current patient treatment and resend medicine by using select list but if he is NOT as medicine of Disprine salt; ECT list then add new drug I create a link when I click on this link then control will again page-3 and add new drug .but after submitting the new medicine and click on the "BACK" button then control access page - 2 and the treatment of the patients first region report do not show.
  
  I want to show this report when I click the back button on the page of no - 3.
  
  How can I do this...
  
  Thank you
  
  Published by: Ed on April 30, 2010 04:57
  
  Published by: Ed on April 30, 2010 04:58
  
  Published by: Ed on April 30, 2010 05:48

  Hi Maury,

  I changed your application and it's working now. The problem is, you set the number of patients at the request of page No - 7 when the link in the page no-6 is clicked. When you get back from page no-5 after the addition of medicine, demand comes from page no - 5 and it doesn't have the patient not inside, so the report query returns all the data.

  I added an item hidden in page 7 and I am the focus with the patient No. 6 and used page in the report query. The value of this element will not change until you change it or the session expires or you click on the link in the page no-6 for another patient. Hope this helps :)

  Thank you
  Machaan

• IPS sensor - Event Notification by e-mail?

  Good day to all.

  I was asked to recreate some features after he lost the customer improved VMS to the CSM but without CS-MARCH or any other event monitor. The user has had the system to generate an email when an event was triggered. He was apparently noisy initially but after setting wasn't a bad solution. No one knows how he was initially put in place but I can only assume it is the method that is described in the Cisco document to: http://www.cisco.com/en/US/customer/products/hw/vpndevc/ps4077/products_configuration_example09186a00801fc770.shtml#fivesensor

  Now, however, since the CSM has not received the event data is it possible to recreate this process of "notification"?

  Are using CSM 3.02 and the sensors are still at 5.14. The sensors will be updated to 5.17 later today. I will then either be upgrading the client to the latest revisions and service to CSM or rolling packs to the VMS depending on whether I can get notifications to work with MSC.

  NOTE: They order a CS-MARS appliance with the conviction that it will solve the problem, but as the last word, it will be several months at least before they could get it. I'm afraid that CS-MARS will NOT give back them this feature. Can you confirm/deny?

  Finally - CSM does not include a security monitor, as did virtual machines, and CS-MARS not really recreate that kind of view or the management of the events - what solutions are there to reproduce the functionality of the Security Monitor? Are there? Is-CS-MARS the new bully on the block?

  Since the client is to stay at a 5.1 version, then you have 3 options:

  1) down to virtual machines and continue to use the Security Monitor

  2) stay with the CSM and buy CS-MARCH for the monitoring of events. CS-MARS should provide the ability to e-mail notification.

  3) stay with the CSM and installing and using VEI 5.2 (1).

  VEI 5.2 (1) can be installed either on a separate machine from the CSM as a stand-alone utility:

  http://www.Cisco.com/cgi-bin/tablebuild.pl/IPS-EV

  VEI 5.2 (1) contains the new alerts e-mail notification feature.

  GOLD VEI 5.2 (1) can be installed as part of the installation of CSM (I know it's in the CSM 3.1, but don't know about previous versions of CSM).

  Here are a few documents on the execution of the IEV 5.2 (1) in the CSM framework:

  http://www.Cisco.com/en/us/partner/docs/security/security_management/cisco_security_manager/security_manager/3.1/user/guide/monidiag.html#wp1203768

  NOTE: VEI 5.2 (1) is targeted for use in networks with sensors of 5 or less. When running with 5 sensors or more, then CS-MARS would be the veiwer advised.

  When the user later upgraded to version 6.x, then option 1 (downgrading to virtual machines) is no longer an option and option 2 or 3 would be required.

• Calendar events shows is not in the center of Notifications

  I have an iPhone running on iOS 9.3.5 5s

  I have problems with my notification Center, events calendar, weather summary, view today does not show in the notification Center.

  PS All widgets are activated from the notification Center.

  Hello goodguy17,

  Thank you for using communities of Apple Support. It is my understanding from your calendar events and other widgets are not appearing in the Notification Center on your iPhone. The Notification Center keeps me abreast of all my appointments and important updates, I can understand your concern. I want to help get this resolved with you.

  First of all, I recommend you restart your iPhone. A simple reboot can solve many unexpected behaviours. Follow the steps below to restart if necessary.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  If the problem persists, reset all the settings would be the next option. It takes all the settings back to default, including: Wi - Fi networks and passwords, alerts, notifications, brightness, wallpaper and sounds. Even if no content is lost with this step, it is always a good idea to back up your content first. If you need help with the backup using the link below.

  The backup of your iPhone, iPad and iPod touch

  Once you have argued successfully until you can reset all settings by going to settings > general > reset > reset all settings.

  Have a great day!

• How to change the report options to show only the results of success/failure?

  Hello

  in the report Options I have report = ASCII text file Format.

  In the Expression of filtering the results, I can choose between four preset selections (all results, exclude,..).

  But if I want to put together a custom then the first word 'Result' expression is highlighted in red
  Result.Status == 'past ' | Result.Status == "failed".

  And the error message in the ToolTip indicates: property name or an unknown variable.

  What happens then?

  THX

  OK, I lied!

  It worked for me, just by using Result.Status.

  It's ok that it shows red like that because it will assess correctly during runtime.

  Kind regards

• Can I drag the event target source drag?

  I have adds drag and drop features of a tree control on a VI at several targets of slipping on different VI.  For example, they can drag the tree for a XY Chart on another VI, a table to an another VI, a digital indicator on an another VI, etc...  In addition, when they abandon the data, I need to know where he left it down and initiate an action from the drag source (tree control) VI.

  My problem is, I see no way to determine what VI and control the move action took place the.  I'm basically looking to the control reference of the operation drag and drop target once the drop event occurs.

  I know that I should add a few cases of event for all the different targets, but I try to keep the minimal code and keep most of the complexity of the VI with the source.  If I have, I will use some sort of a global or the driving force to write an identifier of the target VI to a place where the source VI can be read, but I'd rather not do that in many places so I don't have to.

  Create your own event type user 'Control' and save it in the same diagram as source Tree. On the event of filter "Drag start?" of the source tree, inject this event Ref use in drag data (it will take be flattened). Then, in the 'Drop' unflatten handler this Ref user event and send event user with the value of the event data "Ref" of this event handler 'drop '. It is a form of a callback function, which is much more reliable than a global engine or action that exposes the risks of racing conditions.

• Activity report of PC showing use 24 hours a day

  I'm administrator of my son with Windows 7 PC. I set parental control for hours limited to 4 per day, between 4-8 pm. However, his report shows 24 hours some days, which is impossible because the computer is unplugged and in full view as limited. What is the solution?

  Hello

  Thank you for visiting Microsoft Community.

  According to the description, I understand that your PC report shows 24 hours of use for a few days. I will certainly help you to question.

  I suggest you follow the steps mentioned below:

  Method 1:

  You can run the troubleshooter family safety by clicking on this link .  This will fix any corrupt files.

  Method 2:

  Use the System File Checker tool to repair missing or corrupted system files

   

  Please visit the following link to run the file system Checker:

  https://support.Microsoft.com/en-us/KB/929833

  Method 3:

  See the article mentioned below:

  Looking for web filtering reports and activity in the Windows Parental control?

  For reference:

  Implement family characteristics

  Hope this information helps.

  Response with the State of the question and we will be happy to offer you our help

  Thank you.

  Sincerely,

  Ankit Rajput

• CISOC IPS sensor 5.1

  Where can I find a list of the threats that are mitigated by the 5.1 sensor ICS. We evaluate the product, and a primary need is blocking of spyware/adware. I know that it lists the spyware/adware as one of the "anti-x", but there is no 'detail' to have. All installed and configured it? Thank you.

  There is always the ASA5510 or 5520 devices with the CSC module that makes anti-x (where x = spam, viruses, spyware). The problem with these devices is that you can't do IPS and Anti-x at the same time. Each of them is a separate module.

• Not my events show up on the calendar

  I do not use any other calendar except the one on my pc windows 8 and yet show events that are not mine.  Under accounts is made see the my account aol, but I do not use this calendar.  How know what is sync for that adds events and how that stop him?

  Hello Kathy,

  You can check the link below for unsynchronized account calendar app.

  1. sign in to the Windows Live profile page: http://profile.live.com/services

  2. click on AOL, click delete this topic completely.

  3. click on the button delete in the confirmation window.

  Note : But if you still want to have your accounts connected, please note that all events that are from this account will be in the calendar app

  I hope this helps. Otherwise, feel free to write us back.

  Thank you

• No timed events shows is not in the calendar

  I have a new Pixi Palm 1.3.1 I go again running untimed events (birthdays, ect) and do not show anywhere on the calendar on the pixi.  They appear in my calendar with google Sync.  How can I get these to display on the phone?

  Surprisingly; AST night Pixi downloaded some updates and prest 'o change' o, everything works.

• Report on events uses too much RAM

  I run a report for the events of multiple vCenter servers.  Since get-vieventplus can run against a vCenter at a time, I am cycling through a list of the vCenters of a foreach statement.  However, the report is using 98% of 24 GB of RAM and wedging on.

  He opposed the first vCenter without problem and went to the second.  But when it goes on the second he had exhausted all of the RAM on the virtual computer running the report.

  Are there errors in my code?  I don't get all the errors on the screen - if there are no errors - how can I make this report to operate more efficiently, so that it does not use a lot of RAM on the virtual machine, I'm running from?

  $vcenters = "vcenter1", "vcenter2", "vcenter3", "vcenter4".

  $now = get-Date-time-Minute 0 - 0 - 0 second

  $daysBack = - $now. Day + 1

  $Start = $now. AddMonths(-1). AddDays ($daysBack)

  $DaysInMonth = [DateTime]: DaysInMonth($Start.Year,$Start.Month)

  $Finish = $Start.AddDays ($DaysInMonth)

  $report = @)

  {foreach ($vcenter to $vcenters)

  Connect-VIServer-Server $vCenter - universal_service_account of the username-password password

  $report += get-VIEventPlus-start $start - finishing $finish |

  Where-Object {"VmCreatedEvent", "VmClonedEvent", "VmDeployedEvent" - contains $_.} GetType(). Name} | %{

  $evtThisNewVMEvent = $_

  Try {}

  $vm = get-VM-Id $_. Vm.VM - ErrorAction Stop

  }

  Catch {}

  return

  }

  $vm | Select «-»,

  @{N = 'The virtual computer name'; {E = {$_.name}},

  @{N = "vCPUCount"; E={$_. NumCPU}},

  @{N = "MemoryGB"; E={$_. MemoryGB}},

  @{N = "guest operating system"; E={$_. Guest.ToString (). "Split(":") [1]}},"

  @{N = "ProvisionedSpaceGB"; E = {[math]: Round (($_.))} {{(ProvisionedSpaceGB), 1)}}.

  @{N = "UsedSpaceGB"; E = {[math]: Round (($_.))} {{(UsedSpaceGB), 1)}}.

  @{N = "FreeSpaceGB"; E = {[math]: Round (($_.))} ProvisionedSpaceGB - $_. {{(UsedSpaceGB), 1)}}.

  @{N = "Current host ESXi"; E = {$_.vmhost.} Name.Split(".") [0]}},

  @{N = "vCenter Server"; E={$_. "Uid.Split(":") [0]." {{Split("@") [1]}},

  @{N = "Createduserid"; {E = {$evtThisNewVMEvent.createdTime}}.

  @{N = "created by";} {E = {$evtThisNewVMEvent.UserName}}.

  @{N = 'VMID'; E = {$_.vm.} VM}},

  @{N = "Original ESXi host"; E={$_. VMHost.Name.Split(".") [0]}}

  }

  {Disconnect-VIServer-Server $vCenter - confirm: $false}

  Try something like the script attached.

  I did all the variables, but you should get the idea.

  Note that you can use the EventType parameter on the Get-VIEventPlus function, this avoids having to return all the events, and that should be a filter on the customer.

  This should also save a memory.

• Report of BI showing NULL for decimal numbers

  Oracle Business Intelligence 11.1.1.7.0

  In an earlier version of BI, we had a problem with our reports where all numbers with the digits after the decimal point would return an empty result in the report (the correct numbers would still appear in the example of data model data), but only when seen as an interactive report (PDF views were very good).  However, after an update it happened with any point of view report, not only the view of interactive report.  I found a work around for that I CAST each column number to Double precision, and then he would show increased the fine.  It worked for a few months, only now it doesn't work at all.  After talking with the system of administration, I don't not think any update that happened between when the solution of MELTING has started working, and when it stopped working.

  Everyone knows about this problem?

  Well, apparently the cast IRON solution still works, but not when I use a SUM (have not tested the other aggregates).  Creating a subquery as below, however, the work:

  SELECT CAST (result AS DOUBLE PRECISION)

  Of

  (

  SUM (col_1) AS SELECT results

  FROM table_1

  )

• Change events - show/hide subforms

  I'm relatively new to LiveCycle. A few questions:

  (1) I can easily show and hide subforms based on a selection of list of radio (click) button. When I use the script (or similar) in conjunction with a menu drop down, I need to make the same selection twice before the correct subform appears (and the subform "undue" disappears). Under change events, the script looks like this:

  if (this.rawValue ==1) then

  WaiverSubform.presence = "invisible"

  ChangeSubform.presence = 'visible'

  ElseIf (this.rawValue ==2) then

  WaiverSubform.presence = 'visible'

  ChangeSubform.presence = "invisible"

  endif

  As mentioned, it works with a single click of a radio but button drop-down list selections must be made twice. Any help?

  (2) also under change events, I'm trying to reset the same subforms if a form filler has entered data then undergoes a change of mind, backs up and makes an alternative selection that causes the subform is invisible and does appear a subform replacement. What ends by goes, it's the entire form is reset (at least I don't get the error messages). I'm defining variables and using the xfa.host.resetData script. Any help on this would be appreciated as well.

  Larry,

  (1) try to move the script to the exit menu event dropdown.

  (2) xfa.host.ResetData effects of the entire form. You need to reset each individual rawValue to reach your goal.

  Steve