Irish (Gaeilge) nature preservation of MySQL

Similar Questions

• form of nature preserving...

  Hello world

  I create character styles to control many formats of characters. Its working fine but when I find fontStyle "Bold" or apply the character style "Bold" to it. I want to jump this while the paragraph style itself fontSyle "Bold" (or) the paragraph style itself fontSyle "italic". So I have to find subsections which applied "Bold" fontStyle and characterStyle 'Bold', applied if it is ture, then the "None" character style is applied.

  If someone help me out and it would be appreciated.

  Thank you in advace

  Indana

  Can you post the part of the script that search attributes and applies the style of good character?

  It could be as simple as

  If (. appliedParagraphStyle.fontStyle myFoundItems [x] == "Bold")

  .. applies "[none]";

  on the other

  .. apply 'Bold ';

  -even if you don't actually have to apply [None]; Depending on the circumstances, it might even backfire. In a "BOLD" with a text outlining - paragraph style applied by means of a character style - he would Remove the Exhibitor style.

• Irish of Smartphones blackBerry for Blackberry "BOLD"?

  Anyone know where and how to get the Irish (gaeilge) language of the user for BB "BOLD"?

  Thanks in advance for your answers.

  G.

  1. If your carrier have Irish, you must follow this:
  2. The site of the service provider wireless, download BlackBerry Device Software for the BlackBerry smartphone which includes the Irish language pack.
  3. Open BlackBerry Desktop Manager.
  4. Select the application loader tool.
  5. Open Add/Remove Programs. At this point the BlackBerry Desktop Manager confirms if the version of BlackBerry Device Software that is installed is specific to the service provider wireless BlackBerry smartphone was purchased from.
  6. In the device application selection screen, locate the Irish language and the support of the entry.
  7. Select the language you want to install.
  8. Click Next. The installation will begin.

  Once the BlackBerry Device Software is installed, the phone smart BlackBerry, complete the following:

  1. Go to the Options.
  2. Under input language, select the language that is installed.
  3. Save your changes.
  4. Compose an e-mail message to test the input language.

• BlackBerry smartphone APP WORLD vs MEDIA CARD Coupla Questions...

  So... I downloaded appworld and didn't get a few decent applications... works great... no probs at all...

  Which leads to the question...

  I have a 2 GB card inserted... and would like to know how to move some of the apps on the home screen

  and to run them without any problem... and do it safely.

  My phone memory decreases fast enough that I added new applications in of appworld.

  ~ and I deleted via the DM progs that I don't no need... or ever intend to use...

  It would be great if I can move ALL the apps that I use on a memory card... I do not know that the phone would go very quickly then......

  So... Is this possible?

  And finally ~

  I love my 9500 BBStorm far... he had since February... No probs, but I miss WLAN and Skype...

  They will be available for the storm updates...? I was wondering...

  Kind regards...

  Mike

  Hello!

  There are three types of potential memory on a BB: 1) application memory, the device memory) 2 and 3) Media/SD memory card

  Application memory - it is the most important; It is protected (not available to the user), dedicated and (fixed size) space as the destination for the installation of applications (more a few storage applications, overhead and other costs). You can't touch AppMemory. You cannot improve the maximum AppMemory that your BB has. It is what it is. Applications can install only here... There is no other choice.

  The device memory - it is space on your BB you can touch these files, images, media, etc. In general, it is not very big, but it is available.

  Memory card SD/Media - is what it says... your SD card to store files, media, photos, etc.. It can be as large as your BB OS can support... see this KB:

  • http://www.BlackBerry.com/BTSC/KB05461

  On some devices/OS levels, enforcement and the memory of the device are combined into "free file"... This is, IMO, a little more difficult to administer that you can't see really how AppMemory you have. Nevertheless, here are some tips to use:

  • http://www.BlackBerry.com/BTSC/KB15345
  • http://www.BlackBerry.com/BTSC/KB14320
  • http://www.BlackBerry.com/BTSC/KB14213

  In addition, it is always important to correctly close applications when you are finished with them. Using the back or on the red button won't do that - those leave the app to decide what to do... and some let themselves memory-resident, consumes resources on your BB, slowing down the overall performance. Rather, to close an application, press the BBKey and select 'Farm' or 'Quit'... that forces the application to be closed, freeing for your new use the resources it consumed. Some applications will always be running (in general - BBMessenger, browser, homescreen, phone and Messages)... but, you should always close them properly - especially the browser... If we leave on a web page, it will not consume only additional resources, but the power of the battery as well.

  Finally, there are some utilities available (including AppWorld) which will "store" apps on your SD card... but they never will 'run' from there. What do these utilities is to uninstall the application (sometimes called 'archive') of AppMemory and keep it stored elsewhere. When you want the application, it will be installed again to AppMemory from this location of archive and then deleted again when you are done with it. Awkward, but given the nature preserved the basic architecture of BB and AppMemory, it's the best possible currently.

  Regarding WLAN and SKYPE - you will need to check with these developers to see what their plans are.

  Hope that helps!

• Preserve class Runtime - why?

  LV2013.

  This code works, but I'm trying to understand why I need the operation of preserve.

  If I don't get that, I get a compile error in the ShiftReg on the right:

  "One or more of the entries to this terminal registry or shift comes dynamic no frontal entry terminal."

  

  The VI used, looks like this:

  

  I have a root called "Addon" class and a class called "Addon for TC programs.

  Another class of root is called "Bench shows" - not a child of one or the other.

  "Addon for TC programming" class contains an array of "Bench Emissions" are

  The purple screws are the ADDON (root) class methods.

  So I look for each bench, do some work on it and put it back into the table.

  Some of this work is to a root method.

  But I do not understand the error.  It is impossible for the connector must be one class other than class who came out.

  If I put the turf inside the VI itself - operation there always the error.

  I can't do this second terminal DYNAMIC of entry (LV doesn't let me) - that is the question?

  Can someone walk me through what the compiler?

  The problem is not due to the static nature or dynamics of the terminal Addons, it related to the dynamic state of the seizure of the bench shows.  Because THESE entries are dynamic, LV CANNOT guarantee that the code you currently see is even the code that will be executed at run time.  Therefore, it does not guarantee that the type is preserved.

  If you wrap the "Emissions bench: bench Menu Items" VI in a static VI (who calls the dynamic VI) you can then put the preserve in the Subvi.  This will then give the appearance of the double dispatch.

• Connection to Oracle 11g with MySQL 5.1

  Hey all,.
  I have searched all over the web for this, and I can't find information that applies to my case. I have an Oracle 11 g DB on a Windows Server 2003 SP2 installer and installing the heterogeneous services ODBC driver. I want to connect it to a different Windows 2003 SP2 machine running MySQL Community.
  
  On the side of the Oracle, I set up the systems to MySQL ODBC connection, and it connects successfully. I also configured tnsnames.ora as follows:
  
  mysqlecommerce =
  (DESCRIPTION =
  (ADDRESS =
  (PROTOCOL = TCP)
  (HOST = dvlps11.cosine.com.cy)
  (PORT = 1521)
  )
  (CONNECT_DATA =
  (SID = mysql_gateway))
  (HS=OK))
  
  I have initmysql_gateway.ora with the following two lines:
  
  HS_FDS_CONNECT_INFO = mysqlecommerce
  HS_FDS_TRACE_LEVEL = ODBC
  
  and I get the following in the listener.ora file:
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = mysql_gateway)
  (ORACLE_HOME=C:\Oracle11g\product\11.1.0\db_1)
  (PROGRAM = dg4odbc)
  )
  )
  
  I also created a dblink as follows:
  
  create the 'MYSQLECOMMERCE' of the public database link
  connect to MYSQLDB
  identified by '< pwd >.
  using 'mysqlecommerce ';
  
  Now when I try to run a simple SQL selection such as:
  
  Select 'id_category' ps_category"@mysqlecommerce «»
  
  I get the following response:
  
  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:
  [MySQL] [ODBC 5.1 Driver] [mysqld - 5.1.36 - community-log] you have an error in your syntax SQL; consult the manual for your version of the MySQL server for the right syntax to use near '' id_category' FROM 'ps_category' A1' at line 1
  
  ORA-02063: preceding 2 lines of DG4ODBC
  
  Can someone please help me understand what is happening?
  
  Thank you in advance!

  The syntax error is caused by your database MySQL does not not in ANSI mode. By default, DG4ODBC sends a code compliant ansi in the foreign database, which means for column sensitive to case and table names it surrounded by double-quotes. MySQL DB not working not in mode compatible ANSI rejects them and uses a back tick to preserve the case - so it reports a syntax error in the case of double qoutes.

  To solve the problem please have a look to My Oracle Support note:
  Problems of selection of data to Mysql using 11.1.0.6 DG4ODBC - error in your SQL syntax [ID 553030.1]

• Full screen video mode, preserving the size of objects

  Hello
  
  My task is to show a video player using the full screen. I have no problem doing that, but I need to perform in such a way that only video scales to full screen while other objects (the player controls) remain unadjusted. If I just go full screen - mode everything onstage is furred naturally.
  
  Playing with the functions of full screen I could come up with the only solution that is to calculate a scale factor (based on, say, stage.width and stageWidth) and adjust the dimensions of the player controls and position accordingly.
  
  Is the best way to preserve the sizes of objects or there is a better technique?
  
  I was hoping that each display object has it's own scene and I could show only video fullscreen by doing something like:
  
  _video.stage.fullScreenSourceRect = screenRectangle;
  _video.stage.displayState = StageDisplayState.FULL_SCREEN;
  
  but he's still developing all objects.
  
  Thanks much for sharing you experience (or sources).

  Hello

  I must apologize for my stupidity in the post in 2008-06-19 12:08:40 (as well as other incidents of my brain dysfunction). I made statements that are not true. For example, I said: "their assumption was that video is the King, and by default to go fullscreen is to resize the video only." It's BS. They don't make this assumption and, in fact, programmers have complete control over the display.

  kglad, you inspired me to look deeper into the hardware acceleration and now I understand better things (or so I hope).

  I do deviate acceleration hardware and all resizing occurs by program.

  My understanding is that when using the Rectangle across the video - he dimensionnera everything that is within the limits of the rectangle. I couldn't find a way to scale just a video using the rectangle. I was hoping that working a line as follows:

  _video.stage.fullScreenSourceRect = screenRectangle;
  _video.stage.displayState = StageDisplayState.FULL_SCREEN;

  He did but in the same way that (note there no _video in scope)

  stage.fullScreenSourceRect = screenRectangle;
  stage.displayState = StageDisplayState.FULL_SCREEN; -which means that everything is scaled up.

  I don't think I fully understand the concept of stage again because in my mind that each object display had it's own step and this step translates the scene of a higher display object (parent). Actually, when I speak of stage - it takes the reference to the highest stage.

  kglad, if you find the time to clarify this point - it would be a huge contribution to humanity :-)

  Back to the description of how I coded full screen WITHOUT using hardware acceleration (in case someone still hope my intellect :-):)

  Step 1. A mechanism that responds to the wish of the user to see the screen full of thing.

  It could be a button with a listener added. The listener will change stage.displayState

  Step 2. Create a mechanism which reacts to changes in displayState.

  a. get System.Capabilities.screenResolutionX and screenResolutionY - these two parameters will tell you how wide and high video possible.

  b. calculate desired video dimensions based on the height and width of resolution and video metadata. This means that one of the ratios will give you scale factor. For example:

  var scaleFactor:Number = Capabilities.screenResolutionY/metaData.info.height will define how it increased (by definition _video.scaleY and scaleX = scaleFactor) using this scale factor newly calculated (assuming you want all the video screen filling).

  c. balance video. Center it if you wish.

  d. hide the objects you want to be shown in the view full screen

  e. visible positions of objects in a desired way. For example, move the player to the bottom of the screen controls calculate x and y, once again, by using parameters screenResolution.

  When the user leaves the mode full screen - reverse what has been done: resize the video at its original size, the positions of origin x and y, see other items, move the Player control to which they belong.

  Fact.

  A brief look at the approach is to enter full screen mode without resize the SWF to the origin. If no further action taken - your player look as it seems at the origin: all the preserved dimensions and swf is the position where there is default (left, Center, or right). And then resize/reposition specifications.

  It will be useful.

  Thanks kglad!

• MySql to Oracle DB Migration, creating schema problem

  Hello
  Im a beginner, try to migrate a mysql database in oracle. The mysql db contains a few tables, if im trying to migrate everything manually.
  When filling out the tables a problem im. It's as follows:
  
  Table 1 has a Key (t1_col1, t1_col2, t1_col3) primary Composite.
  Table2 contains a column (t2_col1), which is a reference to Table1 t1_col1 (to make t1_col1 a repository key in the other table must be UNIQUE or PRIMARY, but as we know table can have a unique primary key and the t1_col1 contains redundant data, so cant make UNIQUE either).
  So I tried indexing of the t1_col1 column but it dint seem to work as well, creating table2 it gives "no unique match or primary key for this list of columns.
  ".
  
  I think that MySql is not so strict a lot compared to Oracle, please guide me through this, any workaround (s)?
  This is the MySql schema:
  
  CREATE TABLE "temp". "table1")
  't1_col1' varchar (50) NOT NULL,
  't1_col2' varchar (50) NOT NULL,
  't1_col3' varchar (50) NOT NULL,
  "t1_col4" integer NOT NULL,
  PRIMARY KEY ('t1_col1', 't1_col2', 't1_col3')
  )
  ENGINE type = InnoDB
  CHARACTER SET utf8 COLLATE utf8_general_ci;
  
  
  
  CREATE TABLE "temp". "table2")
  't2_col1' varchar (50) NOT NULL,
  't2_col2' varchar (50) NOT NULL,
  FOREIGN KEY CONSTRAINT 'table2_fk1' 'table2_fk1' ('t2_col1')
  REFERENCES, 'table1' ('t1_col1')
  ON DELETE CASCADE
  ON UPDATE CASCADE
  )
  ENGINE type = InnoDB
  CHARACTER SET utf8 COLLATE utf8_general_ci;
  
  
  Looking forward to the answer.
  
  Kind regards
  Peter
  
  _______________
  The system configuration:
  CentOS 5 (linux kernel 2.6.18 - 8).
  MySQl 5.0.
  Oracle 10g Enterprise edition
  
  Published by: user10707566 on December 12, 2008 04:28

  If I didn't know that MySQL allows you to declare FK constraints that are non-profit information only and does not apply, I would find this surprisiing really, since the essence of a FK relationship is that the child is identified by the parent.

  In Oracle, you must create a primary key for the substitution on the table1 based on the unique combination of col1, col2 and col3. I would certainly use a sequence for it. Next, you create a unique constraint on col1, col2 and col3 to apply your natural primary key. FK in table2 would be the key to substitution from table1. Something like:

  CREATE TABLE table1 (
     t1_surr_key NUMBER NOT NULL,
     t1_col1 Varchar2(50) NOT NULL,
     t1_col2 Varchar2(50) NOT NULL,
     t1_col3 Varchar2(50) NOT NULL,
     t1_col4 integer NOT NULL)
  
  ALTER TABLE table1 ADD CONSTRAINT table1_pk
     PRIMARY KEY (t1_surr_key);
  
  ALTER TABLE table1 ADD CONSTRAINT table1_uk
     UNIQUE (t1_col1, t1_col2, t1_col3);
  
  CREATE TABLE table2 (
     t2_col1 varchar2(50) NOT NULL,
     t2_col2 varchar2(50) NOT NULL,
     t1_surr_key NUMBER NOT NULL,
  CONSTRAINT table2_fk1 FOREIGN KEY (t1_surr_key)
     REFERENCES table1 (t1_surr_key)
     ON DELETE CASCADE
     ON UPDATE CASCADE)
  

  John

• Hear an album after another in the natural order

  In iTunes, there is an 'Album of the artist' option which allows me to listen to the tracks of each album in the natural order, one album after another. This seems not possible on my iPod Nano (6th). Does anyone have a suggestion? Classical music lover I find it confusing to have a concert mixed movements. BTW, there is a function to play all the tracks of all the photos in alphabetical order, but it's also discomforting

  Create a smart playlist that includes all the songs in your iTunes library.  I have a window Edit smart playlist list that looks like this

  

  This playlist has ALL your songs.  If this selection is too large to fit on your iPod nano, you can add additional rules to the smart, such as playlist

  Kind is classic  (all songs from the classical music should have entry kind of 'classical' music)

  The artist is [artist name] (create a separate smart playlist for each favorite artist)

  You can also use the points to Match only checked box, in order to limit the smart playlist of songs that are archived in the library.

  NOTE: You can use normal playlist instead and add songs manually.

  See the playlist in iTunes and use the sort order of the artist Album .  Set up synchronization for include the playlist.  If you synchronize library of ensemble music, it is included automatically.  Sync the iPod.  When you use your iPod, play songs in this playlist (with iPod a play in-order).

• My calendar retains the events for a month, but when I look back over the past months, only recurring and default events are preserved.  I have a bad memory and I want that all events held on my calendar.  How can I do this?

  My calendar keeps events a month, but when I think back several months, only recurring and default events are preserved.  I have a bad memory and want to keep all the events, I put on my calendar for a year.  How can I do this?

  Go to settings > Mail, content, timing and you should see an option for synchronization. Make sure that you put in all the events if you want to keep past events calendar

  Alternatively you can also use iCloud.com to restore calendar events that may have been accidentally deleted

  If you've accidentally deleted your calendars, reminders, or contacts of...

  I hope this helps!

• Help me uninstall the Irish language Pack (IE)

  I write my messages to gmail in English. Since yesterday the words show everything they need of correction (emphasizing red dots). I don't know why. Maybe because I maybe selected recently Firefox (IE) Irish language Pack (dictionary).

  Simply select the dictionary of British English, or whatever you usually use, instead.

  In Windows & Linux is by right-clicking on a misspelled {uk) misspelled {(mot é.-u.) and selecting the languages.}} I guess it's the same thing or similar on a Mac

• Looking for a replacement for opening that preserves the adjustment (in opening).

  Photos for Mac OS is not rushing to meet the needs of more than 90%, so I need a replacement of spares for Aperture.

  I have a library approaching 100 000 photos so import is a major concern. I'm looking for an app that will preserve the adjustments made within the opening. It's almost not negotiable :/

  Thank you

  Photos for Mac is the only application I know of, who keeps the aperture settings. Too bad it does not your other needs. It does not allow to customize the workspace with presets like Aperture, it does not support the presets for metadata and bath not changing, almost no support for the referenced images.

• Mozilla keeps blocking of the supplement Dragon Naturally Speaking

  I am running a dictation program called Dragon Naturally Speaking version 13. I get an error message when I use Mozilla, saying that add it in are blocked and asking if I would like add it in. Repeatedly, I selected allow and remember to have the error message will appear again.

  Any information or assistance that someone can provide would be greatly appreciated.

  Thanks for the fix. I got confused I found that the Dragon program under the extensions should have looked there as well.

• How to reverse the direction of scrolling using the mouse wheel which is simillar to 'natural' scroll of MAC

  I use the latest version of Firefox (31.0) on Windows Pro 8.1. I wanted to mimic OS X way of scrolling in the window of the browser called 'natural' to scroll. I edited the registry setting for my logitech mouse and scrolling works perfectly as I wanted it to every single window on my system with only one exception, the Firefox browser.
  Somehow, Firefox is configured to use the old method of scrolling and does not respect the registry settings of windows, as all other windows.
  Is it possible to change or reverse the direction of scrolling?

  Thank you
  Roman

  Roman Hello, try this: enter about: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named mousewheel.default.delta_multiplier_y. Double-click it and change its value to -100.

• Designation of the owner/group MySql server

  QUESTION: I recently discovered that the MySql server is the owner of all my directories root (see image).  I don't remember having done anything to cause such a transformation will take place.  Until I upgraded to El Capitan, this had never been the case.  It is surely not good.  I am completely baffled.  Can anyone offer an explanation?

  In freedom,.

  Roddy

  

  There is no way that could be possible, as you probably could not even connect to the Mac.

  My guess is that the MySQL server, the user has been somehow given UID = 0 which is root. Alternatively, the operating system determines somehow that UID 0 must be displayed as MySQL server.

  Run this command in a Terminal and look out to see if it has an alias to UID 0.

  dscl. read the users/MySQL\ Server