Driver for Laserjet1018 8.1 Windows

Similar Questions

• Driver for G7 - 2251DX running windows 7 64 bit

  I need the driver for the laptop next

  HP Pavilion G7-2251DX

  Install windows 7 64 bit and can not find the driver for the following.

  PCI\VEN_1022 & DEV_780B & SUBSYS_184B103C & REV_14
  PCI\VEN_1022 & DEV_780B & SUBSYS_184B103C
  PCI\VEN_1022 & DEV_780B & CC_0C0500
  PCI\VEN_1022 & DEV_780B & CC_0C05

  Any help will be appreciated.

  Thank you

  Hello:

  Please see my response to your other post on the link below.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/driver-for-G7-2251DX-running-Windows-7-64-bit/m-p/3819706

• Error installation software device driver for removable devices in Windows Vista x 64

  I have Windows Vista x 64 installed on my PC and nVidia Forceware motherboard and graphic cards.

  When I plug in any removable drive into my USB 2.0 port, Windows starts the installation of the device driver software and then sees it as an unknown device. The dialog where he asks me if I want to 'locate and install driver software', 'Ask Me later' or 'don't show this message for this device.

  I select the recommended option: "locate and install driver software.

  I click 'Continue' when Windows asks me permission to continue.

  Then, when the execution of the installer of the software in the bottom right of my screen, the installation of driver software for device, it shows "unidentified device failed.

  Then another window pops up saying this:

  "Found New Hardware - device unknown".

  Windows encountered a problem installing the software driver for your device

  Windows found driver software for your device but encountered an error trying to install it.

  Kodak

  An error occurred during the installation of the device:

  The driver for this device is missing a necessary entry. Maybe it's because the file INF was written for Windows 95 or later. Contact your hardware vendor.

  If you know the manufacturer of your device, you can visit their website and check the support section for driver software. »

  That's what he does when I'm trying to connect my Kodak Easyshare M550 digital camera. I would go ahead and contact Kodak, but the problem seems to extend to ANY removable device on my computer.

  For example, I have a Lexar Flashdrive. When I plug it into my USB 2.0 port, it Windows says the following:

  "Windows needs to install driver software for your USB Flash Drive", etc...

  'Install the device driver software', 'USB Flash Drive search Windows Update'...

  Then a window opens asking me to "insert the disk that came with your USB key. Problem is that no driver disk not supplied with the hardware that Windows Vista is supposed to come with the drivers. I know this because the camera and usb flash drive worked very well until I reinstalled Windows Vista on my new hard drive (new installation, because my old hard drive crashed) and I've NEVER had to install device drivers for Windows to recognize it as a removable drive and operate automatically.

  Also, I installed Daemon Tools Lite and I had to manually "Update" the device driver to point to the "Windows\INF" folder in my hard drive, after copying the cdrom files needed for the specific subfolders for windows to let the program assign a drive letter for the drive virtual it creates.

  I think that perhaps not all device drivers have been installed when I installed Windows Vista, this time. If that's the problem, I don't know how that could happen, nor how to fix it, but I really prefer to find a way to solve this problem without reinstalling Windows Vista again. I don't mind not manually install the drivers as long as someone can show me what files to copy and where to find them on the Windows Vista disk that I bought at Microsoft. I KNOW that Windows HAS come with these drivers.

  If anyone knows how I can fix this, please tell me, because it's ridiculous to not be able to use any removable device readers (except for the use of all Flash drives). Thanks in advance.

  I know it can be frustrating to solve problems.

  (A) was this post or hibernation sleep?

  Microsofts troubleshooting KB

  http://support.Microsoft.com/kb/928631

  (B) the bios settings

  First of all you do not state if you tried to see if there was a setting in bios disabled USB ports during the startup. Or how the bios was set to install devices automatically. If you check your manual site or the motherboard manufacturer

  It will tell you which key to press. And where your USB ports are on or off. Some systems do not have to turn on or off.

  Plug n play OS on conscious

  could help Vista automatically recognize your USB

  (C) what version where do you use? SP1? or gold?

  (D) USB hubs may cause problems just be hubs. Power connected?

  (E) and of course if it is a case check connection in the right port. Return panel slide? plugged into port back?

  Hope something here helps

  Keith

• HP dc 7800 how can I install the driver for serial port pci Windows 8.1

  HP dc 7800 how can I install the driver for serial port pci Windows 8.1 Please help

  Hello:

  Download and install the W7 AMT driver.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3459243&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dvc_78665_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.

• How to install driver for canon bjc1000 (using windows xp service pack 2 drivers) on widows 7 starterpack?

  How to install driver for canon bjc1000 (using windows xp service pack 2 drivers) on widows 7 starterpack?

  XP drivers for XP, NOT of Windows 7...

  Go to control panel > devices and printers > click on "add a printer".

  The computer will search your but probably not find it, then click on the box "" does not appear the printer that I want to ".

  A list is displayed, but the printer is not in it, then click Windows Update. After a few minutes, a revised list will appear and if you click on the cannon, the BJC 1000 is in the list.

  Click on 'NEXT' and follow the installation instructions...

• I'm looking for the driver for canon cp400 pour windows 7

  I'm looking for the driver for canon cp400 pour windows 7

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I have windows 8 and ip4000. The software does not load and it doesn't seem to be a driver for 8 64-bit windows. What can I do?

  I have windows 8 and ip4000.  The software does not load and it doesn't seem to be a driver for 8 64-bit windows.  What can I do?

  Hello

  I had the same problem.  I was able to get around by loading the driver for Windows XP 64 bit from the Canon web site and then install the printer using the normal menu of 'install new printer' Windows 8.  If I remember correctly, I could have gotten an error message or two, but the printer appears in the printer window and ran very well.  Hope this works for you as well.

• Satellite A200 - can I driver for SD card on Windows 7?

  Hello

  I'm french so sorry for my poor and bad English.

  I installed windows 7 32 bit on my Toshiba Satellite A200 and my SD drive does not.
  Must I download I driver?

  Kind regards
  Jehuty.

  Hi Jehuty57,

  Yes, you must download and install a driver for the SD card.

  You can download it here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  If you can t find a Windows 7 driver, you can try the Vista one. It should also work.

• Audio driver for Satellite Pro 4340 Windows XP

  I tried an audio driver for my Satellite Pro 4340 Windows XP, but still I can't find a. I know this is an old model. Y at - it still a sound driver for this model YMF744b DS-1 Audio which is Windows XP. Please help me find an audio driver.

  Hello

  I think you might find the drivers on the European driver Toshiba page
  But unfortunately; the XP drivers are not availbel for this good old classic;

  However, you should look for in the area of the ARCHIVE.

  Check the driver page and choose:
  Archive-> Satellite Pro-> 43xx Pro Satellite-> Satellite Pro 4340

  It seems that the sound card chip is Yamaha...
  Google for maybe audio driver Yamaha that you will find something.

  Welcome them

• Re: Driver for A135-S4637 work Windows XP

  Dear all,

  I recently bought a new laptop of Toshiba of Saudi Arabia (Toshiba A135-S4637). Although it is sold in the Gulf region, I could not find anywhere in the Site of Gulf of Toshiba and instead, I found this on the US Site.

  The laptop comes with Windows Vista Home, but since I'm not like Windows Vista I installed XP SP2 instead. I was so surprised that the Web of Toshiba site market not yet have all the drivers for this laptop on Windows XP.

  So, I surfed several manufacturing sites (Intel, Realtek, Agere, Atheros, etc...) and collected some drivers on their part. As well as some Toshiba drivers for other laptops in the same series, I collected this file with the drivers for the laptop (A135-S4637) and they works FINE on my laptop.

  I collected and downloaded the drivers in a single file, and here's the link to the file to help you if you encounter the same Situation.

  Here are the links:

  http://www.DriveHQ.com/file/DF.aspx/publish/Thunder2210/PublicFolder/A135-drivers.part1.rar
  http://www.DriveHQ.com/file/DF.aspx/publish/Thunder2210/PublicFolder/A135-drivers.part2.rar

  Thank you and best regards,
  Ashraf

  Hey Buddy,

  Thanks for providing this drivercollection bit, but have you already stated that there is NO official driver package which is supported by Toshiba? I've provided a few months ago something and one of the admins contacted me and asked me to put information in my post where absolutely and definitvely not
  official toshiba driversupport is given.

  Please add this to your message to avoid misunderstandings between the providers of this site and the users here.

  Otherwise, your driverpackage is very nice and helpful. :)

  Greetings

• DVD drive for HP Envy running Windows 8

  I get an error regarding a possible corruption with the driver for my DVD drive on my HP Envy (Windows 8) factory installed.  When I try to update the driver through the Device Manager, it says the best driver currently installed.  Unistal does not help either, and HP has no download available that I could find to get a copy of "fresh" to the driver.  Here, any help is greatly appreciated, the news of the event are below.

  Device SCSI\CdRom & Ven_hp & Prod_DVD - RAM_GH82N\4 & 38dc178c & 0 & 040000 had a problem starting.

  Driver name: cdrom.inf
  Class GUID: {4D36E965-E325-11CE-BFC1-08002BE10318}
  Service: cdrom
  Lower filters:
  Upper filters:
  Problem: 0 x 27
  Status: 0x0

  Hello

  Thanks for providing the information.

  Have you tried The Microsoft Fixit for ligthscribe problems yet?

  If the fixit does not resolve the problem, then the DVD player must be replaced.

  Is your laptop still in the period of one year standard warranty? If it is a desktop of Windows 8, it should be. The release date for the marketing of resources 11 October 2012 it is still covered by the warranty.

  Contact HP to get a DVD player replacement warranty.

  I have

  Best regards

  ERICO

• HP pavilion g6-1153sl: Ati radeon 6470 m and intel hd 3000 dual graphics driver for 10 64-bit windows

  Hi, I need ati radeon 6470 m and 3000 dual graphics intel graphics driver for windows 10 pro 64-bit edition. Windows 7 and windows compatible driver 8.1 does not work on windows 10, it installs successfully without any problem, but swtiching to high performance cause crashing of a game or multimedia player. I also tried the update of the driver through windows update, but it detects ati radeon 6470 m as series 7400 m ati and don't work at all, although please help me what to do.

  rhsiddiqui

  Sorry to be the bearer of bad news, but the problem, that you are facing is that Microsoft provides only pilots with the most basic features and what you really need for these features in laptops is the specialized drivers written for the specific material found in laptops - and unfortunately, there is no HP Win10 laptop driver.  HP only guarantees the compatibility of Win10 for machines manufactured after August 2013. HP is not no matter what timetable indicating when, or IF, they will produce drivers for older machines.

  This means that your PC is probably NEVER going to be fully functional under Win10 because the pilots is needs for all features simply do not exist!

  To restore all the features, you will need to do a reset to factory using HP recovery media to its original operating system pre-installed.

• HP 14-R109TU: Driver for HP 14-R109TU windows 7 32 bit

  Hello

  I just bought a HP model HP 14-R109TU laptop, I want to install a windows 7 32 bit, can someone give me the link to download drivers?

  appreciate it.

  Thank you

  Hello:

  You should be able to use W7 32-bit drivers and software (except the BIOS and firmware files) of the HP Probook 450 G2.

  Your model uses the Intel HD graphics driver and Realtek RTL8723BE wireless and bluetooth drivers.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=6943827&swLangOid=8&swEnvOid=4053

  Sometimes the graphics drivers are specific to the model so if one on the G2 450 supports page does not work, one directly on Intel should.  The first file listed is the automatic installation file.

  https://Downloadcenter.Intel.com/download/24869/Intel-IRIS-and-HD-graphics-driver-for-Windows-7-8-8-1-32-bit

• Windows 7 driver for HP Deskjet 1280 Windows 7 32-bit

  I have a printer hp deskjet 1280 and have recently upgraded to windows 7, but can not find the driver for it. I'm on Windows 7 Home Premium 32 bit. Help would be very appreciated

  @taste-seorth, here's a link below that will help you find the drivers for your deskjet.
  http://goo.GL/BVOOg