Is a controller required for roaming?

Similar Questions

• Smart Array controller, required for VMware vSphere Hypervisor

  I currently use VMware Server on Windows 7 for my test enviromnent.  I would like to set up a server using the VMware vSphere Hypervisor.  The server is an HP Proliant ML110 G7.  The server has 4 GB of memory, single core processor quad intel (E3-1240), Intel 82574 Gigabit NIC , and an integrated HP Smart Array B110i SATA RAID Controller.  This Smart Array B110i controller will work with the latest version of the hypervisor?  Version 4.1 documentation controller HP Smart Array under ESXi hardware required but then lists it list a Smart Array P400/256 controller under installation on supported and start of storage systems.

  As far as I can see the server itself, the Integrated NIC (NC112i) or the RAID controller are supported with ESXi (not even on older versions). I really recommend you take a look at the VMware HCL (http://www.vmware.com/resources/compatibility/search.php) or matrix of Support from HP (http://h18004.www1.hp.com/products/servers/vmware/supportmatrix/hpvmware.html)

  Regarding RAID controllers. Make sure that the controller is equipped with at least 512 MB BBWC/FBWC for a good disk performance. Addition of write cache, makes a HUGE difference.

  André

• Error of USB host - peripheral controller is not working properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title - USB - IF xHCI USB Host Controller

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  I have a permanent error on my computer and when I run the troubleshooter I get the above message.  It says Windows cannot load the driver.

  Hello

  USB devices remove all you can - restart the computer - is still there, the error? If it isn't
  It is related to one of the add-in devices that you removed. If she is still there, then, the question is
  either a device internal who can not remove or physically with the USB bus itself.
  If it was not there, add devices at a time until it is displayed - keep in mind that it is
  possible that there are two (or more) devices in conflict over the issue. Once you
  identified the check of the aircraft with the help of the manufacturer.

  1. to find the control panel - device - device - right-click on it - uninstall - Manager then
  Restart the computer to see if it clears.

  2. same place - double click on the device - driver tab - driver update - to see if that helps.

  3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
  online documentation and drivers, diagnostics and ask questions in their forums on all known
  questions. Update the Bios and chipset or other USB drivers.

  =====================================

  If necessary, we will use these additional troubleshooting methods:

  How to fix Code 31 errors
  http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Pavilion P077tx: which driver is required for ethernet controller

  I have the 64 bit version of windows 7, which is required for the ethernet controller driver. In Device Manager, it is shown by the yellow exclamation point.

  Help me

  Thank you

  Hello:

  You need the driver for the ethernet (wired) card.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-137996-1&cc=us&DLC=en&LC=en&OS=4063&productOid=7280165&sw_lang=&product=7280164

• What is the forest and the minimum area required for cloning a domain controller in Windows Server 2012?

  Please let me know the level minimum forest and domain functional, required for the RODC cloning Windows Server 2012...

  Hello

  The issue of Windows is more complex than what is generally answered in the Microsoft Community Forums. Appropriate in the TechNet Forums. Please post your question in the TechNet Forums.

  You can check the link to post your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  It will be useful.

• UMI-7774 required for readers of nor?

  I'm a movement control system design using 3 stepper motors (or Nema 23) and therefore 3 or P70360 readers. Is a umi-7774 required to connect to the controller 4 card pci motion-axis?  (I'm confused as its description on the site nor said that it is necessary for the 3rd party readers BUT in discussions I've read a lot of people have used umi 7774 or readers)

  Hello aks.

  Yes, you will need to purchase and use our 7774 universal movement (UMI) Interface to connect the three engines of readers / motion controller card.

  He could have confused because it does not explicitly say that it is necessary for the 3rd party readers, but not necessarily required for our readers. That said, the vast majority of customers use the UMI Board, because it eliminates the need for custom cables and makes it much easier to connect to several axes.

  Here are some links that can provide more details and could be useful.

  [1] NI Stepper Motion System selection guide

  [2] of wiring for a movement with a Danaher drive system explained

• How Anyconnect VPN users will connect with cisco ASA, which uses the server (domain controller) Radius for authentication

  Hi team

  Hope you do well. !!!

  currently I am doing a project which consists in CISCO ASA-5545-X, RADIUS (domain controller) server for authentication. Here, I need to configure Anyconnect VPN and host checker in cisco asa.

  1 users will connect: user advanced browser on SSL VPN pop past username and password.

  2. (cisco ASA) authentication: VPN sends credentials to the RADIUS server.

  3 RADIUS server: authentication: receipt and SSL VPN (ASA) group.

  4 connectivity creation: If employee: PC so NAW verified compliance, no PC check Assign user to the appropriate role and give IP.

  This is my requirement, so someone please guide me how to set up step by step.

  1. how to set up the Radius Server?

  2. how to configure CISCO ASA?

  Thanks in advance.

  Hey Chick,

  Please consult the following page of installation as well as ASA Radius server. The ASA end there is frankly nothing much difference by doing this.

  http://www.4salesbyself.com/1configuring-RADIUS-authentication-for-webvp...

  Hope this helps

  Knockaert

• Requirements for WDS

  Hello

  We have a few Cisco 1100 and 1200 Accesspoints and heard about the Wireless Domain Services.

  We would like to use this Service to reduce the time of homelessness. I already read the setup guide, but there is something that I did not understand.

  I need to install a radius server in the network to use WDS or it works also without

  We want just to reduce the duration of homelessness. The increase in security is not important to us.

  Thank you

  Daniel

  The feature you mentioned is called secure fast roaming. You don't need an external radius server. (you can use a property). You can use the local radius built into IOS according to APs server.

  The most sticky part is wireless clients. You must CCKM for fast secure roaming. CCKM requires LEAP or EAP-FAST as authentication. All wireless clients are either Cisco CCXv2 complaint (for LEAP + CCKM), or the complaint (for EAP-FAST + CCKM) CCX v3. For the customers complaint CCX, please go to the following URL:

  http://www.Cisco.com/en/us/partners/pr46/pr147/partners_pgm_partners_0900aecd800a7907.html

  My curiosity, what is the current traveling time? What application is required for a faster time traveling? Based on my experience, you only need fast secure roaming if you use the service voice IP, Citrix or SQL applications.

• Error: "no physical memory is available to the location required for the windows boot manager." The system cannot continue. "

  I have a stable system that works with a processor E6300, card mother evga 680i, graphics card 8800gts and 8gbs of RAM running on ulitmate windows 7 (32 bits - I decided to re - install with 64-bit to use the extra 4 GB of RAM, after I deal with the question below).

  I recently tried to add an adapter of Intel RS2WC080 SAS/SATA controller in a PCI express slots on the card mother 680i. I know that the card works (such as "it works very well in another motherboard), but for some reason when I put it in the 680i mobo I get the following message appears when I try to start windows. (i.e. the raid controller has no windows on the disks. I always use original hard drive always connected on the same Sata port on the motherboard)

  "No physical memory is available to the location required for the windows boot manager." The system cannot continue. "

  I tried to turn off virtually everything I could in the bios of the motherboard as an experience (including the things I needed). I also disabled the Intel RS2WC080 card bios.

  I'm puzzled. So what I want to know is simply a hardware compatibility problem, or is there some kind of workaround I can run in windows 7. For example, is there maybe some sort of way for her to start using a different memory location than its currently using? (Or is it something error message related to the memory of the bios that can only be overcome with software?)

  Thanks for any help.

  I tried to disable everything in the bios... including the things I needed. No luck

  Thank you very much for the reply Chris but I don't have abandoned bascially. Right now I guess the card and the 680i have some kind of incompatibility and I will just get a different mobo.

• Minimum hardware requirements for ESXi 5

  Hello

  I am a newbie of virtualization and ESXi so please help me on these issues:

  I intend to host 1 Windows 2008 Server and 1 Pfsense on the same host with ESXi. The two servers to serve a small number of users (less than 10). The Win2k8 runs just small .NET application and the just Pfsense will act as a router/gateway for web portal (without VPN, nothing complicated here).

  I checked the minimum requirements for VMWare ESXi here (KB VMware: minimum system requirements for installing ESX/ESXi) but still uncertain before buying new equipment to run ESXi because the specifications said ESXi only works on 64-bit x 86 CPU.

  I'm looking at this PC:

  CPU: Processor Intel® Celeron® 1037U (2 MB Cache, 1.80 GHz)

  RAM: 8G RAM Support memory DDR3 2 G / 4G / 8G / 16G, DDR3 1333 / 1600 MHz

  Storage: 64G SSD

  
  

  ESXi will install OK on this system?

  
  

  Thank you
  

  Hello

  Intel http://ark.intel.com/products/71995/Intel-Celeron-Processor-1037U-2M-Cache-1_80-GHz CPU specs this should work in general, but can cause performance problems as this Celeron has only 2 hearts.

  Another thing to consider is the RAM, ESXi 5.5 OS takes about 4 GB of RAM on the 8 GB leaving you 4 GB for VMs Windows 2008 with less than 4 GB wil be quite slow and sooner or later begin to swap to disk.

  Also the motherboard used is something check with HCL as at the storage controller and connect it on Board should be compatible.

  The road easier to go is to get the material at the level of the server that is listed in the HCL, you can find systems awarded new/used being fully compatible. It would be much more reliable than the construction of a whitebox on office equipment system.

  cykVM

• The requirements for the universal Clipboard not correct?

  Hello

  The requirements for the universal Clipboard for iMac is not correct. It should work on my iMac mid 2011, but it doesn't. It works on my Macbook Air mid-2013, so I know it works in general.

  You do not discuss Apple in these forums, we are all users like you.

  If you have any questions please ask, however if you have any comments for Apple please leave at www.apple.com/feedback.

• How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?

  How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?

  See if this application works for you > https://itunes.apple.com/us/app/image-size/id670766542?mt=8

• Minimum requirements for Notes?

  The minimum requirements here system requirements for iCloud - Apple support , it does not note.  No one knows what would be the minimum version iOS on iPad for Notes synchronization?

  Jeff,

  I think that iOS 9 is required... Enhance your notes with iOS 9 and OS X El Capitan - Apple Support

  Use of Notes on your iPhone, iPad and iPod touch - Apple Support

  Notes (El Capitan): See notes on all your devices

  

• The amount of space (memory) required for the good functioning of Firefox?

  The amount of memory required for the operation of Firefox? Trying to decide between IE and Firefox. Research in the new computer and need to think about which browser to use, and how much space it needs to work properly.

  You need no more than 40 MB for the operation of Firefox.

• 6.2.16: when you try to update Itunes, I get the following error message: "there is a problem with this package of can I install."  A program required for this install to complete could not be run.  Contact your support team / packages vendo

  6.2.16: when you try to update ITunes on my Windows laptop, I get the following error message: "there is a problem with this Windows Installer package.  A program required for this teaching to complete could not be run.  Contact your supplier of staff or the package of support ".  There is no associated error code.  I've never had a previous issue with ITunes updates.  Thank you, Debbie

  Repair Apple Software Update since the programs & features Panel configuration and then try again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2