Is a database table that is required for the temporary interfaces with the data flat file source?

Similar Questions

• AF:table columns are required for the entire table space.

  Hello
  
  I use a certain controls fast query table. Some tables have only one or two columns displaying data.
  It is necessary that in such a case, avoid any white space after the columns.
  
  I tried setting for each column width to 50%, but it gave no results required in firefox 4.0
  
  I use JDeveloper 11.1.1.4.0.
  
  The only option that seems to work is to specify the width of the column in pixels. It's the last thing I like to do.
  
  Is there a styleClass or any other better alternative?
  
  Concerning

  for the game of table the styleClass as "AFStretchWidth" - which would ensure that it occupies the entire width.
  and use columnStretching as required.

  Sample:

  
  fetchSize = "#{bindings." Departments.rangeSize}.
  emptyText = "#{bindings." Departments.Viewable? "{'No data to display.': 'Access Denied.'}".
  var = "row" value = "#{bindings." Departments.collectionModel}' rowBandingInterval = '0 '.
  selectionListener = "#{bindings." Departments.collectionModel.makeCurrent}" columnStretching ="last"
  'unique' = rowSelection styleClass = "AFStretchWidth" >

  Thank you
  Nini

• Compaq Presario S5000T P8656Q - ABA NA310 motherboard? The information that is required for the replacement of the video card.

  My best friend has an ATI Radeon 9200 SE (Shader 1.0 / DX 8.0) and wants to run a program that requires the Shader 2.0 / DX 9 .0c

  I'll try to find a compatible video card; I don't know if the motherboard for the NA310 of P8656Q-ABA S5000T Presario is AGP 2 x or 4 x.  I tried to find on the ' net, but no luck. Graphics (Radeon 9550 for $24 again), I found is AGP 4 x / 8 x, so I don't want to buy this if the MB is only AGP 2 x.

  Also, I guess the 200/250w PSU would be sufficient for a 9550? It only uses the pc for MS Word, a bit of Youtube and 1 or 2 older games.  If not, anyone know a cheap video card which is AGP or PCI that is capable of Shader 2.0? It is for the sake of compatibility of XNA Framework.

  Thank you!

  It seems that the Compaq Presario S5000T desktop computer specifications are no longer available. With this information we can only guess what this thing has AGP connector. Based on HP and Driver Downloads page software, this model uses a 'P4SD - LA motherboard". The only problem is that the 'P4SD - LA"is available in different version at least four over time... Oxford, Cobra, Stingray, Yale, etc.. The good news is that it seems all support at least an AGP 4 x connector and most support a 4 x / 8 x slot.

  Please send BRAVO

• Requirements for the data plan BBM

  Hi, maybe this is a stupid question to some, but to buy the blackberry from rim, monthly subscription services will still work the same way that if I had a blackberry, IE. BBM will always use the data?

  Topic title edited to reflect the new topic.

  Wendi1 wrote:

  Hi, maybe this is a stupid question to some, but to buy the blackberry from rim, monthly subscription services will still work the same way that if I had a blackberry, IE. BBM will always use the data?

  Topic title edited to reflect the new topic.

  If you are referring to the BlackBerry OS 7 devices and below, then Yes! BIS is always necessary for users BBOS be able to use the BlackBerry Services like email or BBM. But if you are wanting to use the BIS on your Lumia then Im afraid it won't work. BBM works with regular mobile data or WiFi on iOS, Android, BlackBerry 10 and Windows Phone devices.

  I hope I understood your question.

• Database table and a location for the Group of resources and javatask

  Hello
  I want to check all the bundles of the resource and Javatasks for my ACF2 connector installed. Also, I want the DB table and directory where they placed after you download it.
  
  Help, please!
  Thank you

  Yes check the table of resources

  Select * resources where res_name as 'ACF2%.

• Command or a script required for the data store, the identifier of NAA and multipath

  The following script/command gets me politics multichannel on a csv file, however, I need to also identify the "Datastore" name with the number of naa.

  Get-cluster 'windows 01' | Get-vmhost | Get-scsilun - luntype disc | Export-csv c:\lun_multipath.csv

  any help would be appreciated.

  Try something like this

  $datastore = get-datastore
  
  $disks = get-cluster 'windows 01' | get-vmhost | get-scsilun -luntype disk$entry = @()$output = @()ForEach ($disk in $disks){  $entry = "" | Select DataStorename, HostName, Canonicalname, Multipathing  $entry.datastorename= $datastore | Where-Object {($_.extensiondata.info.vmfs.extent | %{$_.diskname}) -contains $disk.canonicalname}|select -expand name  $entry.HostName = $disk.VMHost.Name  $entry.canonicalname=$disk.canonicalname  $entry.multipathing=$disk.multipathpolicy  $output += $entry}$output | Export-csv c:\lun_multipath.csv
  

• Table is not fetch all the data of the VO at a time?

  Hello world
  
  My version of Jdev is 11.1.2.3.0.
  I developed page ADF that has a single Table that should show all the data in the original Version at the same time.
  The table has vertical and horizontal scroll bars. And the VO has more than 900 documents.
  The question is, at the start when loading the page table shows 20-25 records then when I try to scroll down and then the data is going to look this day there ("retrieving data" message) by which its takes a long time to see the data because its extraction at the time where I scroll down.
  How can I avoid this?
  How will I be able to retrieve all data from VO (all 900 records) by which when I scroll data should not look at this time?
  
  And also increases the size of the table and is based on the data when I scroll down.
  How can I avoid this?
  How can we fix the size of the table regardless of the content?
  
  All suggestions will be really useful...
  
  
  Thank you.

  The message «Retrieving data...» "is issued by the client component of table rich user interface when it retrieves data of the server-side model component lines in its local buffer of lines. Even if the server-side model component has recovered all the rows from the database (e.g. VO has recovered all of the rows from the database in the cache of the VO), the client component of table UI does not download all of them locally, but it downloads as needed into portions whose size is controlled by the attribute 'fetchSize' of the table. By default, the 'fetchSize' attribute is set to the value of the property "rangeSize' of the corresponding mandatory ADF iterator (whose default value is 25). In this way, if you scroll to the bottom of the table of the UI after the 25th row, the table would download the next set of 25 lines of its components side server model (and it then displays the message "retrieving data... ('') and so on.

  If you want to avoid downloading frequent of the next rowset of the component side server model to the customer table component user interface, you can set attribute 'fetchSize' of the table to a more fixed, for example:

  In this way, only the client user interface table would download locally 1000 lines (if there are so many existing lines, of course) and it won't download more rows until you scroll the table after the 1000th line (when it would download a next series of 1000 lines).

  Be wise when the setting 'fetchSize' of the table to a large number, because more the 'fetchSize', greater would be the size of HTTP, the longer answer response would be and more memory at the customer level would be consumed for the customer table buffer. Note that-1 (for example "get all") is not a valid value for the attribute 'fetchSize '. If you set it to-1, it will default to 25.

  Dimitar

• During the installation of Firefox 4 beta, he told me that it does not work on my Mac. When I go to system requirements, need a page for Firefox3.6 requirements. Where can I find the requirements for the beta?

  The link to the minimum configuration for Firefox 4 beta takes you to a page that gives you the requirements for Firefox 3.6 instead. I guess that the requirements for the beta are different, that I can't seem to install the beta on my Mac. Where can I find the beta version of system requirements?

  Firefox 4 will not work on the Mac PPC, for Mac it needs the Intel processor. There is an accumulation of third parties based on Firefox 4 beta, which should work on Mac PPC, for details, see http://www.floodgap.com/software/tenfourfox/

• How the nested table that is stored in the database?

  How the nested table that is stored in the database?
  The nested table column is stored with the table main or separate in the database?

  A nested table is a table that is stored in the structure of another table. It is used to support the columns that contain multivalued attributes.

  If you want to use the same type in multiple places, create them on a global scale and these will be discussed under 'Types'.

• Priv required for the user to export the design to the scheme of Reporting account

  We are trying to put in place an outline report, but do not want to share the password of schema with all the proponent to avoid dropping the repository or removing drawings.
  
  Can we create another user account and the same share with developers/modelers so that they can still continue to export the notification schema design.
  If so, can you pls help us leaving what privs are required to consider that account or configuration required for the same.
  
  Thank you
  Muraris

  By using the developer user trying to get the version of the repository
  SELECT DMRS_Persistence_Version from DMRS_INSTALLATION
  If it says "Table or view does not exist" there is something wrong with synonyms.

  You use Data Model 3.0 and repository is created with it, right?
  Have you used my script? I guess there is no runtime error.

• A gateway is required for the RAC environment?

  Question:
  
  A gateway is required for the installation of RAC, General information on the RAC environment?
  *.. If so, why? *
  
  Thank you very much
  
  
  
  I do this test with my single node RAC
  
  1. run with the gateway:

  [oracle@linux1 ~]$ crs_stat -t
  Name           Type           Target    State     Host        
  ------------------------------------------------------------
  ora....SM1.asm application    ONLINE    ONLINE    linux1      
  ora....X1.lsnr application    ONLINE    ONLINE    linux1      
  ora.linux1.gsd application    ONLINE    ONLINE    linux1      
  ora.linux1.ons application    ONLINE    ONLINE    linux1      
  ora.linux1.vip application    ONLINE    ONLINE    linux1      
  ora.orcl.db    application    ONLINE    ONLINE    linux1      
  ora....l1.inst application    ONLINE    ONLINE    linux1      
  ora....test.cs application    ONLINE    ONLINE    linux1      
  ora....cl1.srv application    ONLINE    ONLINE    linux1
        
  [oracle@linux1 ~]$ srvctl status database -d orcl
  Instance orcl1 is running on node linux1

  Every thing seems OK!
  
  
  
  2. run without gateway (empty parameter):

  [oracle@linux1 ~]$ crs_stat -t
  Name           Type           Target    State     Host        
  ------------------------------------------------------------
  ora....SM1.asm application    ONLINE    OFFLINE               
  ora....X1.lsnr application    ONLINE    OFFLINE               
  ora.linux1.gsd application    ONLINE    ONLINE    linux1      
  ora.linux1.ons application    ONLINE    ONLINE    linux1      
  ora.linux1.vip application    ONLINE    OFFLINE               
  ora.orcl.db    application    ONLINE    OFFLINE               
  ora....l1.inst application    ONLINE    OFFLINE               
  ora....test.cs application    ONLINE    OFFLINE               
  ora....cl1.srv application    ONLINE    OFFLINE               
  
  [oracle@linux1 ~]$ srvctl status database -d orcl
  Instance orcl1 is not running on node linux1

  Something is wrong!

  By default, default gateway of the server is used as the target ping during action Oracle RAC 10 g VIP status check.
  After a ping failure, Oracle will decide that the current interface where the VIP is running has failed and will introduce
  an interface / failover of the internode VIP.

  In above case, we used a single node for installation of CRS, so the VIP couldn't failover to other nodes and so reported an additional as error:
  CRS-1006: no more members to consider
  CRS-0215: could not start resource 'ora.dbtest2.vip '.

  Try->
  A FAIL_WHEN_DEFAULTGW_NOT_FOUND parameter in the file
  $ORA_CRS_HOME/bin/racvip to fix this problem.

  The following steps will fix the problem of departure of VIP for above mentioned scenario.

  1 - Stop applications
  2 - as root,
  VI the script $ORA_CRS_HOME/bin/racgvip and change the value of
  variable FAIL_WHEN_DEFAULTGW_NOT_FOUND = 0.
  3. start the application and you should see online resources

  You can proceed to netca and dbca to create a RAC database after that.

• What are the network requirements for the remote server of the Panel?

  What are the network requirements for the remote server of the Panel?

  I tried for awhile now to set up a Control Board.  I can connect to my remote panel of computers from other computers on my local network but nowhere else.

  Whenever I use web publishing tool gives me a URL in this format: Http://Computer-Name.Corporate-Name.local:8086 / VI - nom.html apparently it means I have a local DNS server and this URL is meaningless to the public.

  When I try to connect with the Operate > Connect to... remote control, I get this error message:

  "Connection to Server remote panel...".
  "Connection refused by the server remote control specified: make sure that the LabVIEW Web server is enabled on the specified server.

  I got the same error when I tried to host a remote panel from my laptop at home, on my Wi - Fi.  Is there some network settings or firewall I'm not seting?  Would it be my server or the router or the private network?

  My goal is to be able to host remote panels of my laptop while I'm on the international scene, creating using 4 G internet mobile.  Is it still feasible?

  As he Turners on my router had to be put in place so that my Port is in the rage of transfer.  Also I had to disable DHCP.  Without that you cannot host behind a router.

  These are the instructions I put fallow:http://digital.ni.com/public.nsf/allkb/B1E9A3D78BAED949862573AD0065D4D2

• Error 1074395241: The model descriptor does not contain the data required for the corresponding rotation invariant.

  Hi all

  I use the model Match 4 IMAQ to detect the angle of rotation of an image of model. However, it displays the error: "error 1074395241: the model descriptor does not contain the data required for the corresponding rotation invariant." What exactly is the problem? How to solve this problem? The details are explained below.

  My project is a bit complicated. Part of the block diagram containing the IMAQ Match model 4 is illustrated below:

  

  The source image is a series of images of images read from an AVI video (I used a loop for to process the images frame by frame). The image of the model is an area of the first selected image. So, this means, the user selected the ineterst object in the first frame of the video, and each of the following images to find the object corresponding interest & determine its rotation angle. When I run the above diagram, there no error. However, it shows the angle of rotation zero no matter what it is 'really '. Therefore, I changed the schema by adding parameters, listed below:

  

  But in this case, when I run it, it shows the error I mentioned in the subject line.

  If you need more information about my project to identify the problem, please let me know.

  Thanks in advance.

  S ' Please example from model that comes with labview First
  Go to labview Help > find examples and you can search for example.
  -You create model with angle range and what kind of special criteria you want to use.
  -To do this you must use IMAQ learn pattern before using IMAQ model Match 4
  Reference:http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/

• The settings saved on this computer does not meet the requirements for the network

  My old laptop connects fine but my other not.  When I go to connect to the network, it says "the settings saved on this computer does not match the requirements for the network."

  Hello Tazdmx83,

  Thanks for posting on Microsoft answers Community Forums.

  This problem usually occurs on wireless network connections. I suggest that you turn off any wireless security feature by following the steps below.

  1. click on start and control access panel.

  2. double-click on network connections

  3. right click on the wireless adapter and select Properties.

  4. Select wireless networks, click the name of your wireless network and choose Properties.

  5. in network authentication, select open to disable wireless security.

  6. Please try to connect.

  If the problem persists, I suggest that you remove the connection and re-create the wireless network connections. The following Web site can help you on the creation of the wireless connection.

  http://windowshelp.Microsoft.com/Windows/en-us/help/297fa2dc-B20B-4327-B673-707a968c86801033.mspx

  Important note: Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  If the problem persists, I suggest you reinstall the driver of card wireless network and Re-create the connection.

  Remove the driver for the card
  ========================

  1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
  2. expand "Network adapters", double-click the entry for the wireless network device.
  3. click on the "Driver" tab, click "Uninstall".
  4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
  5 remove the entries related to the wireless network adapter.

  Reinstall the driver with your CD of drivers on the manufacturer's Web site. After installation, create the connection.

  Also access the link and try to follow the steps in troubleshooting network related issues on Vista-based computer:

  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Error - Rome: Total War did not find DirectX 9, which is required for the game to run. Please reinstall DirectX.

  Original title: problems running Vista on Bootcamp DirectX.

  I have browsed the web for the last little while and cannot find any solution.

  I am trying to run Rome Total War on Vista, on bootcamp on my iMac 27 ". However, every time I start the game is active an error message saying "Rome: Total War has not find DirectX 9, which is required for the game to run." Please reinstall DirectX.

  I've been searching the net and have used some DirectX downloads (9) on several trusted sites, but the error message always everytime that I try to run the game.

  I have 'Run' 'dxdiag' and on the 'system' tab is says I have DirectX 11, section 'Information System '.

  I do not know where to go from here, any help would be greatly appreciated

  Have you installed this installation?