is it an effective solution for SAN Extension in terms of Cisco?

Similar Questions

• effective solution for the algorithm

  I have that table t defined below.
  
  1. definition of t table.

  with t as 
  (select 'A' CODE from dual
  union all
  select 'A' CODE from dual
  union all
  select 'B' from dual)
  select * from t;

  (1) in the plsql code, I have to return the cursor ("o_cur") on table t, I can achieve:
  Open the o_cur for
  Select * from t;
  
  (2) as varivale 'i_code' is given and an output variable 'o_code' must be returned with the following logic:
  
  If o_cur has on file "i_code" value then return o_code = i_code,
  Otherwise, if o_cur has exactly on the line then return o_code value as value in this one folder.
  otherwise return o_code = null;
  
  What is the way of effecients to achieve step 2?
  
  I can do of the Nations United-effectively these 2 questions:
  
  count (1) select 2.1)
  in t v_count;
  
  count (1) select 2.2)
  in t v_count
  where CODE = i_code;
  
  And then writes the logic step "2") to get the value of o_code variable to output. But it seems slow.
  
  Maybe I can query cursor already opened "o_cur" somehow? Or is there a better way?
  ---
  
  I can only do this way:
  

  with t as 
  (select 'A' CODE from dual
  union all
  select 'A' CODE from dual
  union all
  select 'B' from dual)
  select count(1) CNT
  , max((case when t.CODE = 'A' then 'Y' else 'N' end)) YN 
  from t ;--rowcount=3, 'A' in list
  
  
  with t as 
  (select 'A' CODE from dual
  union all
  select 'A' CODE from dual
  union all
  select 'B' from dual)
  select count(1) CNT
  , max((case when t.CODE = 'C' then 'Y' else 'N' end)) YN 
  from t ;--rowcount=3, 'A' is not in list

  That seems the best solution.
  
  Published by: CharlesRoos on April 6, 2010 03:57

  CharlesRoos wrote:
  THX,
  with ' count (*) () as total_records '.
  I can add additional column in the cursor to output, which have same value on all lines indicating the number of all records. So if I add this additional column in the cursor output "o_cur" so I can go get a line from him, close the cursor and opens again. And FRO mfetching a folder I get information on the total number of records. But as you can see algorithm I nEtape '2') also requires the knowledge of the weather, the input value "i_code" appeared in the cursor result set.
  I think I do better additional query after openeing the cursor as:

  with t as
  (select 'A' CODE from dual
  union all
  select 'A' CODE from dual
  union all
  select 'B' from dual)
  select count(1) CNT
  , max((case when t.CODE = 'C' then 'Y' else 'N' end)) YN
  from t ;--rowcount=3, 'C' is not in list
  

  Another analytic function can be used to test for the existence of a value in the result set, for example

  SQL> ed
  Wrote file afiedt.buf
  
    1  select empno, ename, job, sal
    2        ,row_number() over (order by empno) as rn
    3        ,count(*) over () as cnt
    4        ,sum(decode(job,'CLERK',1)) over () as clerks
    5  from emp
    6* where deptno = 10
  SQL> /
  
       EMPNO ENAME      JOB              SAL         RN        CNT     CLERKS
  ---------- ---------- --------- ---------- ---------- ---------- ----------
        7782 CLARK      MANAGER         2450          1          3          1
        7839 KING       PRESIDENT       5000          2          3          1
        7934 MILLER     CLERK           1300          3          3          1
  
  SQL>
  

  Here I used the sum function to sum up the number of jobs CLERK in the results. This indicates a '1' for all of the lines stating there the value 1 CLERKS in the result, even if it has not yet been selected by the cursor.

• Solution for Google Chrome (Helper) by using a lot of ram and cpu on mac os x

  Hi all

  Some people have several tabs of google chrome, and it's using a lot of RAM. It also causes the fan go crazy sometimes. I looked for a solution for centuries, but no solution has allowed, until I stumbled upon the simple solution to use a google chrome extension that hibernates unused tabs. The problem has now completely disappeared.

  There are a few different extensions that Hibernate unused tabs, but the only extension which has enough options setting to do what I want, is called "The Great Suspender".

  You can set the time, after which the Hibernate (sleep) tab. The tab automatically resumes when it focuses on, (i.e., you don't need to then also click on a specific button). And the tabs of the extended day before will remain in hibernation after you restart the computer.

  There are many other parameters that can be changed. (After you have made changes, don't forget to click the 'save changes' button.)

  I hope this helps.

  Thanks for the tip.

• Is there an update for Digitalpersona Extension for FF?

  I have Firefox 3.5, recently checked in new HP update and updates DigitalPersona to version 4, however in Firefox extension is still 1.0.1.1 and it is not compatible with FF 3.5, trying to make it work again... y at - it a update for the extension that I don't know, or a way to make it work?

  Hi, Frank.

  You can 'do' upgrade of the extension, but remember, the official update is recommended to 100%.

  1 - find files of extension. In many cases in 'C:\Program Files\DigitalPersona\Bin\FirefoxExt '.

  2. - open the "install.RDF" file with a text editor.

  3. - change line 22, as evidenced by: em: maxVersion > 3.5. * < / em: maxVersion >

  4 - Save and exit.

  5 - zip all files, folder "C:\Program Files\DigitalPersona\Bin\FirefoxExt" (not "FirefoxExt" foder zip, only the files in the folder)

  6. - rename the file zip "youzipfilename.zip" in "youzipfilename.xpi".

  7 - install the file "as" in Firefox (to do this, drag the file "as" in Firefox).

  Remember: it is a solution in time. I recommend that you check the site regularly for updates.

  PS: Sorry for my English.

  Message edited by Danitrech on 30/06/2009 16:54

• Re: Backup solution for vC Ops

  Hello guys,.

  I'm looking for a backup solution for the vcops. My scenario is that we have a vcops 5.0.3 with 2.4 to split between three LUNS. What are the possibilities of the back upward. If I take a snapshot how it would consume about?

  If I move the vcops on SAN NAS, I guess we don't have any problems with the backup or instant? But in the company vcops in the section guide backup as I saw that the vcops does not work on NAS file systems. What some true thing?

  Any help is appreciated.

  Thank you

  VK

  also any related KB article:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2031891

• Effect &gt; options for expressions &gt; layer control

  Possible ways to create a control with the layer Control Panel?

  I need a control to create a model with a unique and secure choice for people.

  1. -' The layer control' control another "layer control"?
  2. Railroad-'sex' hide unwanted layers, showing that specific layers?
  3. Railroad-'sex' show that the outer layers of choice, another model? ("Comp B" model with layers that need to access it). Instead of layers of the same model ('Comp A' where the effect of "Layer control" )
  • Why have two 'sex' (control twice ' sex' for '3. Way'), who must choose separate layers, now I want to join the two "layer control" in a single outer layer with more a "Layer Control" (total of 3 effects), to control the two previous effects, working as a Panel.
  • "Channel 2." would not need two "layer control" in separate layers, a mode to hide layers for each effect of layer control that are in the same layer (or up to what to put another layer, if necessary to achieve the result.) started Comp 'A Comp '.
  • And in the "track 1". Must also three 'control the layer', but should be a phrase that links the choice of model layers where are the control of outer layer effects, with control of hand Comp layer ('Comp A'), who will be the Panel.

  Or otherwise.

  Thank you.

  I think that there are a few issues that make it unlikely that you can get what you want with the layer controls. It's a question that the layer controls can offer the layers inside the model which has control of the layer. The other problem is that the layer controls cannot be controlled by other parameters - they do not accept the keyframes or expressions. My guess is that the best solution for you is a film script Panel, with menu drop-down lists for your choice, but it's a lot more work...

  Dan

• What is the best solution for this idea...

  I have a task I'm trying to test and understand what would be the best solution for this, any recommendations would be appreciated.

  Devices at your fingertips:

  -2 ESXi hosts

  -1 iSCSI SAN OpenFiler (new just installed the app)

  2 ESXi hosts run a small amount of virtual machines that are all in the same domain.  I want to have a file server (or a repository somewhere) that houses a folder with easily accessible software (OS, Office, etc.) on the field.

  According to me, that if I made a virtual machine with a large hard drive and share the software, this would not be the best way because it would be dependent on the OS.  Someone has talked about doing a separte VMDK for it and then install it on the operating system on the virtual machine. This way I could always remove the and mount it somewhere else.

  It seems a bit weird to me that the software within this "shared folder" will also be sitting on the data store (if I create a virtual machine and need to use the OS/etc).  Not that doubles the space for the same software (in the comments, then the data store)?

  What is the best approach to make this action which can be accessed at the prompt (mostly windows) in the field?

  What is the best way to stay away the software doubles in action and on the data store?

  Please forgive me if I put interpereted your question.

  The problem you seem to face is that you must mount the ISOs of VMS software and physical systems that are on the field.

  (please, correct me if I'm wrong on this)

  If this is the case, then the best way to do would be to create sharing NFS on the openfiler, if you use openfiler to main databases also then he would be better for sharing this was separated to prevent the other help to be able to tamper with the VMDK and VMX files for your virtual machines.

  This could then be mounted in ESX to access the ISOs. While being easy to install on Linux and Windows machines to access the ISOs.

  If you have questions about NFS mounting in windows, so, this link may help

  http://sagehacks.WordPress.com/2009/01/21/HOWTO-mount-NFS-shares-under-Windows-7

  If you are needing to access the VMs software and it is mainly the downloading ISOs then th ISO directly to the data store is possible.

  This allows you to use ESX to mount the ISO on the virtual machine.

  On the point that the software will use double disk space when you install the software on a machine virtual car will be on the network share and the VMDK virtual machines in the data store. That's right, and that's by design.

  Each virtual machine under ESXI is 'independent' (http://www.vmware.com/virtualization/virtual-machine.html)

  This means that each virtual computer must have its own copy of the application.

  This perspective reflection of each virtual machine as a separate system of 'physical '. They interact with each other as if they were physical systems.

  Each VMDK resembles a physical hard disk. Being accessible (in most configurations) 1 VM at a time.

  So if you had a set of physical systems connected to a domain and I wanted to install an application on each one, then each would have its own local copy of the application. It's the same thing with virtual machines.

  However

  If you configure a set of physical machines so that you run the software from a network share. It is possible to do the same thing using virtual machines using the exactly the same configuration. However, the chiefs more associated to this are important in both cases.

  Concerning

  Cyclooctane

• Change the title for the extension of the JS code

  Hello

  Can you help me?

  I want to change a title for Panel or models extend the JS code, but I have not found a way to do it.

  In Flash/Flex (Extension Builder 2.1), I can change the window title because it is a title for Window(). In HTML, I create Extension (model type) and when I call this extension (open) I see title of manifest.xml.

  (open the extension code: window.__adobe_cep__.requestOpenExtension (extensionId, params))

  I want to change this title when I navigates to another page in this window (extension) (1 page - 'images', page 2 - 'colors') from JS code.

  How do I change a title for the extension of the JS code.

  Thank you!

  Unfortunately, the CEP solution, we have at the moment has the basic characteristics too lack, IE. one can not change the size of the screen, implement drop-down menus, ToolTips, extend controls outside the panels on Mac and many more and all that in addition a bunch of very serious bugs that are really impossible to circumvent. Apparently, it's immediately an another feature missing from this list...

• What is the replacement of design mode in flex builder 4.7 for builder extension cs?

  Because design view is not available in flash builder which is the use of the generator of the extension in the design of the user interface now let us design the user interface with the xml code that is very tedious and boring if there is no replacement for him only please aident.1 one more thing I want to know is that when I make new default project in the generator of expansion (flash builder 4.6) it also not able to load the errror creation mode is

  C:\Program Files\Adobe\Adobe Flash Builder 4.6\eclipse\plugins\com.adobe.cside.libsinstaller_2.0.0.4-33034\archive\cslibs\2.0\4.5\re lease\apedelta.swc and no respondingSWC file failed to load. Everything depends on this file component SWC does not appear in the Design Mode.The CFC does not load because of:

  * Incompatible definitions caused by the use of a different version of the SDK

  * Missing class definitions referred

  I searched quite considerably and my understanding is that Adobe did not intend to support Design view more for Extension Builder.  In my opinion a very disappointing decision and one that is difficult to understand.

  The best solution I can find is to create the majority of your design in a Builder Extension parallel, right, of the project and then convert/import your design in your Extension.  It certainly isn't as satisfying that having the Design view for the Extension that you write, but it is better than to simply create your layout: guess/trial and error.

  Although this has not been announced by Adobe, I have a suspicion that the reason why they decided to not to put other resources in design of fixing what Extension Builder as we know it will be dropped soon, probably replaced by a method of creating extensions to HTML5/JavaScript.  My problem with this is that, other than to reassure that there are reasons of compatibility backward support for legacy extensions, it will not be a way of compiling an extension in a way that prevents people from seeing your code.

  It's all speculation, and I guess we will have to wait and see what happens.  Hope this has helped.

• Simple solutions for a cinematic look with 60i video?

  I'm sure this question pop upward again and again but I'm a huge headache trying to solve everything through my research, especially as a beginner to the film world.  I'll get right to my questions, but first, here's the equipment I work with:

  Camcorder Sony HDR-XR500, shot in format AVCHD 1920 x 1080 60i =

  Software = Creative Suite CS4

  Recently, I threw together a 10 min film from a trip that I just got the use of Premiere Pro and while it was a lot of fun to put together I really have no idea if I went to this issue the right way.  I want to practice taking a clip of mine and convert it to this cinematic look and hope someone can help to guide me through some steps.

  Here's what I want to achieve:

  -ratio of 2.35: 1 pixel

  -24 p or a similar effect (trying to figure this out makes my head spin)

  I know that the color correction has much to do with the film appearance, but I realize that there are several ways to go about this, so I'll refrain from asking questions regarding this for now.  (I found using the fast color corrector and Saturation adjustment to 75%, and levels of inputs to 20, 1, 220 glanced of beautiful film)

  Step 1: Should what settings I use to create my project?

  Capture format = HDV?

  For the sequence presets can I use AVCHD 1080i30 (60i) non-anamorophic?

  Step 2: If I want to create a ratio of 2.35: 1, should I simply culture my clip?  I think I read somewhere for 1920 x 1080 video, crop 14 percent of top and bottom?  Or should I get when I export the movie?

  Step 3: What would be the fastest single/more to get that look of 24 fps using Premiere Pro or After Effects?  I know shooting in 24 p is obviously the easiest way, but should I just deinterlace my 60i video right click for video > Options for fields > deinterlace always to achieve a similar effect?

  Step 4: Export video... still so many options, I don't know what to do here.  Basically, could someone provide me with the best export options for the format, so that I am trying to achieve:

  -Display on the Internet

  -Display on computer

  -And look at a blu - ray

  I really appreciate any help on these questions.  A big thank you!

  Step 1: Capture settings are not relevant for AVCHD on this camera.  Simply copy the structure of the entire folder intact on your hard drive.  PR will find images copied to the media browser panel.  You may even be able to modify it directly from the camera HARD drive.  You should try it and see.

  2: 1920 x 816 stage produces a ratio of 2.35: 1.  Assuming that your whole action occurs in exactly in the center of the vertical shooting, then you should trim 132 pixels from top and down.  Place your 1080 footage in a progressive sequence of these dimensions, you should get what you want, as long as you do not have by default to scale to the size of the image selected in the preferences.

  Step 3: This is the difficult.  For 24 fps to 30 fps, an image of each 5 should be deleted.  This will produce perceptually playback choppy, especially if no movement at all is present.  If the remaining frames must be mixed together somehow to smooth out the bump where the missing image is.  Using AE to achieve this, is my humble opinion, the best solution for an all-CS4 workflow.  In AE, you have 2 choices: merging images and movement of the pixels.  PM produces better results, but FM makes it faster.  If you did not yet no editing clips of Pr, then the best idea would be to convert all images in AE before importing it into PR.  If you already have changes in place in public relations, then you can select all the clips in the sequence and choose file | Adobe Dynamic Link. Replace with After Effects Composition.  Whatever it is, each element in EI must be interpreted individually at the edges of fields and preserve the separated.  The parameters of the model should be set to 24 p.  Then the interpolation must be enabled for the model, and finally, each level framework mix switch must have the value of fusion of images or displacement of the pixels.  If you don't use dynamic link, be sure to * off * interpolation in public relations, because EI has already taken care of that.

  Step 4: Because the rendering will be so intense and take so long, I recommend export an intermediate file of Pr, then re-import this file to use as the source for the various export formats.  Otherwise, you will need to make all over again for each individual export format.  For the web, I recommend Flash.  For the computer display, it depends on your mode of delivery (CD, DVD, download, external hard drive, Flash drive, etc.).  For Blu - Ray, H.264 Blu - ray or Blu - ray MPEG2.

  -Jeff

• By dictating the long notes, using Siri, Siri will stop as soon as I take a little break. Therefore, the note ends abruptly. Any solution for this?

  By dictating the long notes on Mac using Siri, Siri will stop as soon as I take a little break. Therefore, the note ends abruptly. Any solution for this?

  For long notes, you are better to use regular old dictation - under Mac OS for a few years now, Siri is not mandatory.

  To activate it, go to "System Preferences"-> keyboard-> dictation. Once enabled, you can press the "Fn" key twice to activate and dictate the long notes in any application.

  Siri is optimized for short, quick things. I don't think that you can change, you just use the method that is better to listen to what you want to do at the time (short notes, using Siri. Long notes, use dictation).

• Is the time capsule the best solution for me?

  Dear Apple Support,

  I'm looking for a good solution for the following:

  -economy of mey Macbook Air 13 "wireless backup

  -Storage of files from various media (videos, basically)

  -Playback of multimedia files (iphoto library and mkv videos) on my Smart TV (wifi capable, and endowed with a multimedia player)

  I think a Time Capsule and Apple TV, but before buying it, I want to be sure those will satisfy the above requirements.

  Thank you for your answer!

  Kind regards

  Tamas

  If you format a drive for mac to use as a Time Machine backup format there is a chance your smart TV will be able to read this disc.

• I am told my Firefox version is outdated but on Firefox said I'm updating version 39.0 + solutions for older versions do not work

  I run Firefox version 39.0 but told me that my version of Firefox is outdated even by the Mozilla site.
  About Firefox said I'm updating version 39.0 + solutions for older versions do not seem to work.
  I tried to download the full installer and run it, https://www.mozilla.org/firefox/all/
  (he was supposed to detect my existing installation and update).
  Then reopen Firefox and go to this site.
  Yet this site advises again once update me my version of Firefox...
  I would appreciate your help.
  Keep up the good work,
  Thanks in advance,

                                 Gunter Von Breslau
  

  If you couldn't fix it by resetting the custom entries general.useragent subject: config as described in the article above, then you might also Update firefox that should address this issue as well...

• I'm having issues get notifications on my iPhone and my Apple Watch. Anyone know of a solution for this?

  I'm having issues get notifications on my iPhone and my Apple Watch. Anyone know of a solution for this?

  Difficulty what for? What "issues" are you having?

• Hi all OneHow can you buy an IBook UK not available in Indian store a store; When you change the status of your country, your billing information and credit cards won't work; is there a solution for this using the same method of billing.

  Hello world

  How can buy you an IBook of UK not available in Indian store a store; When you change the status of your country, your billing information and credit cards won't work; is there a solution for this using the same method of billing

  There is no solution, if it is not available in your area, you can't buy it.