Is it easy to install a 2.5 SSD "in a desktop Dell Precision T5610?

Similar Questions

• After a clean install which drivers do need me for a Dell Precision 390

  I'm going to do a clean install with Windows XP Pro on a Dell Precision 390 what are the bare essential drivers, I'll need for the machine to work properly, and where can I get them? Thank you!

  Hello Michael,

  After Reinstalling windows, make sure you install the drivers in the correct order. It is very important for the computer to function properly. Please click here to get the drivers for Dell Precision 390.

  I hope this helps!

• Y580: OS install on new mSATA SSD disk HARD + mSATA SSD config

  Hi guys,.

  I was wondering if anyone has done this? I have the 1 TB HDD + 32 GB mSATA config, but I want to install a new mSATA SSD possibly of 128 or 256 for my operating system and applications. I heard there was a problem with the removal of partitions due to Lenovo Rapid Storage. Has anyone successfully circumvented this?

  I guess that separate readers via these instructions http://78.9.150.202/pub/RapidDrive.pdf
  then saving them, putting in the mSATA SSD again and do a clean install should work.

• How can I enable AHCI in dv7 6199us? And install windows on a SSD?

  Hello!

  I got help.

  How can I enable AHCI in dv7 6199us? And install windows on a SSD?

  Intel based computers, like yours, are usually set to "RAID", which is a superset of "AHCI". Basically, if the BIOS won't let you choose between "IDE mode", "AHCI" and "RAID", leaving in the RAID led to you everything done "AHCI". In this case there is no need to activate the AHCI, as RAID will support an SSD anyway.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Is it possible that I can install American greeting Creatacard Plus on my new Dell computer

  Installation of the program

  Is there a way I can install American greeting Creatacard Plus on my new Dell computer.  I had it installed on my old computer and love the program and don't want to lose him.  I have a lot of data that I will be unable to replace also unless I transfer program.  Dell indicates that the program is incompatible with his system, and that's why I can't install it.  There must be a way that it can be made compatible so I can install it.  Please notify.

  Contact support American greeting Creatacard.

• Cannot install the disc existing Outlook 2003 to new Dell with windows 7.

  Cannot install the disc existing Outlook 2003 to new Dell with windows 7.
  Cannot copy old file .exe that runs on windows xp.  does not open.

  Site MS says compatible with OUtlook 2003 IS-

  That is what it is?

  Windows Update has nothing to with the upgrade of Windows. Please repost your question in the support forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I just installed a new router and now my desktop running Windows XP computer does not connect to the internet.

  Hello

  I just installed a new router and now my desktop running xp computer does not connect to the internet. I know that it is not the router because I plugged the cable into my laptop running 7 and it works fine. When I try to dhcp I get 169..., when I put manually the IP just get no access to the internet and can not ping to the router address. I tried to run the net work Assistant, emptied my dns, disabled all firewals, still nothing.
  Any suggestions?
  original title: connectivity Limeted

  The zero configuration utility works very well. But it is a desktop computer and on cable. All other wired and wireless PC in the office is working well, then it's definitely this PC. He came out of nowhere, I install a network printer on the PC but that's all.

  Your messages are a bit terse, but if I understand correctly

  • You have a router connected to the Internet and multiple computers connected to the router, some Ethernet cable and others by wireless.
  • All but one of these computers can reach successfully from the Internet via the router.
  • A computer that can't browse the Internet is connected to the router via an Ethernet cable.
  • You disconnected the cable between the router and the desktop problem and connected it to a Windows 7 laptop and the laptop connected to the Internet via the router.
  • You haven't seen any error message (except, perhaps, a message on "Limited or no connectivity").
  • You have installed Windows XP Service Pack 3 (or at least Service Pack 2)

  Assuming that all the foregoing is an accurate summary of the situation, I suggest that you do the following:

  Open a command prompt window (start > run > cmd > OK)
  Type the following lines and press ENTER after each line

  Netsh reset winsock catalog
  netsh int ip reset c:\resetlog.txt

  Close the command prompt window and restart the computer.

• I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work.

  I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work. I can get the led light will stop flashing when I open the door all the way, the machine detects the drive but do not read or close on its own, how can I get this disc surgery? Downloading updates, I installed a software disc, when I ejected the disc, the drive comes of is stopped. The computer still sees the drive, but will not read or even close on its own. I also had been using my computer in mode mute until I tried to increase the volume and now the computer tells me no playback device installed. Device Manager acknowledges the Harmon/Kardon soundsticks connected to it, but nothing does, how it works? The Control Panel also sees the soundsticks, but still when I try to move the volume the computer says there is no playback device installed.

  Hello

  1. do you get any error code or error message?

  2. what day you installed recently?

  It seems to be a problem with the hardware. I suggest you try to uninstall and reinstall the CD/DVD driver and check if it helps.

  Follow the steps to uninstall and re-install the drivers.

  a. click on start toreduce this includes this im and then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

  Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  If the methods mentioned above did not help, then it would be best to contact the manufacturer of the computer/CD/DVD player.

  Hope the information is useful.

• Installed RAM 16 GB, only 4 GB in BIOS - Precision T5400

  Hi all

  I'm at the end of the roll, trying to make the best of my memory upgrade.

  I am running Windows7 64-bit on Dell Precision T5400 single quad-core Intel Xeon E5405. Card mother 0RW203. BIOS version A11

  Has obtained eight identical sticks of 2 GB of ram (for a total of 16GB) and installed on all the places available. Noticed on the properties of Windows - installed RAM 16 GB (4 GB usable). Tried to play with the allocations of virtual memory, but without success.

  BIOS enabled and it showed all 8 locations occupied with 2 GB of ram, but the installed memory is 4 GB. Don't see any options for tweaking the settings of the BIOS for it to recognize all of the 16 GB of ram.

  Checked each stick individually and all play nice and the CPU - Z reports installed as well, removing the issue of housing or the motherboard. I suspect that it is a BIOS problem, and I would be grateful to anyone who can suggest a solution.

  I'll be happy to provide the additional information requested. I inherited the machine, so RMA and returns are out of the question.

  Ok

  Here is a temporary workaround

  on my example

  Initially, I had installed 4 GB / 4x1Go in slots 1-4 (white)

  I wanted to move to 16GB / 8x2Go

  And obviously had a same problem as the topic starter

  But I managed to work the memory following the path:

  1. Install memory old back and let the bios not recognize
  2. restart and shut down pc
  3. install the new memory (16 GB / 8X2Go)
  4. After turning on, you will see the message "memory size has changed.
  5. strike the F1 to continue and just forget about the existance of the BIOS, because as soon as you go, chances are that your memory will be reduced

  Clearly, this is a bug in the BIOS.

  I use A11.

  For DELL it would be really good remedy finally

• Install Windows 7 on SSD and programs on the HARD drive?

  Original title: conner bottomley.

  Hello

  I was wondering if you could help me! I recently built my own PC, it has 2 drives (1 SSD and 1 HDD) and I want to have windows 7 (64 bit) installed on the smaller SSD and all other files and programs on the larger HARD drive could you give me some instructions on how to do it? I've been strugling for awhile now!

  I am completely new to this so if you can keep it nice and simple, would be great!

  Thanks for your help :)

  Conner

  Have your program files on the HARD drive defeated the purpose of having an SSD in the first place. The goal is to start the operating system and load your programs faster.

  Then, install the operating system and programs on the SSD and store your personal files (Documents, music, photos, videos etc.) on the HARD disk.

  Demarrer start from the Windows 7 DVD, and then select the SSD drive during installation

  For information about how to modify your BIOS options to boot from the DVD drive, see the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  

  

  Click Custom install Windows only (Advanced)

  

  Select the SSD drive, and then click Next.

  Once Windows 7 is installed, you can redirect personal folders on the HARD drive to store your files.

  http://notebooks.com/2011/05/18/how-to-redirect-your-personal-folders-in-Windows-7/

• I have two question first: is it true that install ligthroom on an ssd and work on it can "burn" or "broke" quickly the ssd? and the second is what I install lightroom 5 2 Mac with a license?

  I have two question

  first: is it true that install ligthroom on an ssd and work on it can "burn" or "broke" quickly the ssd?

  a second is what I install lightroom 5 2 Mac with a license?

  The license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

• Can I install Photoshop elements on my laptop and desktop computers?

  Can I install Photoshop elements on my laptop and desktop computers?

  Yes

• I need activate and install the Prime Minister on a new desktop computer and take it off my laptop that someone else uses at present. How can I do this?

  I need activate and install the Prime Minister on a new desktop computer and take it off my laptop that someone else uses at present. How can I do this?

  You can simply disable the activation of the laptop by signing out or Deactivate option: it is not necessary to uninstall.

  Learn how to enable or disable Adobe applications.

• can I install CC on my laptop and my desktop computer?

  I want to install creative cloud on my laptop and desktop. Can I do this with a single plan or what I need to buy two?

  Hi Robert,.

  Yes. You can install the same license on 2 machines.

  Reference: licenses and terms of use | Adobe

  Kind regards

  Sheena

• Hi, is there an easy way to copy an entire site from the desktop to the version of the tablet version?

  Hi, is there an easy way to copy an entire site from the desktop to the version of the tablet version?

  It is not possible to duplicate content en masse. You can copy the page structure, backgrounds, and metadata when you initially create mobile sites. The content should be created from the ground up; Although you can copy and paste (or drag and drop) Office-Tablet pages page and rework. You can also use the content panel to create a synchronized text - the scale of the site, which will save you a lot of time.

  David