Install Windows 7 on SSD and programs on the HARD drive?

Similar Questions

• Move files and programs split the hard drive

  I am running XP on a disk hard to split, C, and D. All my program files are on C and it is full. There are not many other large files on C. The D drive is only half full. How can I move files from C to D program so that XP can find and they work properly?

  You may not, without uninstalling them and custom install to d. (programs that is)

  You can use a third-party tool of the party, for example Acronis Disk Director to merge partitions, if D contains only data, other wise D to shrink and expand C (all with the tool)

• Pavilion dv7-4273US: how to order Windows 7 recovery discs and to rebuild the hard drive on an HP Pavilion dv7-4273US

  On our HP Pavilion dv7-4273US hard drive crashed last week. None of the recovery tools on board work. Installation for Windows media system. We have more disks orginal for this system of 4 to 5 years. Spend many hours on the site of HP support and on the phone with technical support. Failed to get info on how order/buy these discs.

  There are many 3rd party sellers on Amazon and eBay which cannot be verified as valid solutions.

  Does anyone know how to order these discs?

  Hello:

  To order a recovery disc for your laptop, click on the link below, select the W7 x 64 operating system from the drop-down list.

  Then click to expand the order recovery media line and then click on the blue link for more details.

  http://support.HP.com/us-en/product/HP-Pavilion-dv7-4200-entertainment-notebook-PC-series/4346314/model/5052151/drivers

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.

• Which folder or file not hibernation process store open files or programs on the hard drive?

  Which folder or file not hibernation process store open files or programs on the hard drive?

  Which folder or file not hibernation process store open files or programs on the hard drive?

  Hello

  The Hiberfil.sys hidden system file is located in the folder root of the drive where the operating system is installed. The Windows Kernel Power Manager reserves this file when you install Windows. The size of this file is approximately equal to the amount of memory (RAM) is installed on the computer.
  http://support.Microsoft.com/kb/920730

• How to find all the old files and documents on the hard drive

  Original title: how to find a file

  How to find all THE old files and documents on the hard drive

  Hello

  -Are the old hidden files?

  I recommend you follow the steps in these articles for help.

  Show hidden files
  Find a file or folder

• To access the files and folders from the hard drive Windows 7 on Windows XP, access denied error message.

  Original title: portable destroyed - need for car access

  I don't know if this is the right forum - please advice if it is not.

  My friend's laptop computer was destroyed in a car accident. I pulled the drive and placed it in my desktop XP system and the drive appear in good health. However, I received permission issues trying to access records on the disk and thought that it was because of me using Win XP and the laptop was Win7x64. My questions below are based on the assumption that I'm not able to access these files on my Win XP system. If this assumption is incorrect, so please let me know.

  I have a laptop that I don't use and put the disk in it. I was hoping it would be plug and play all the new material, but after reading a little online, I know that this is not the best thing to do and will probably not work as did the earlier versions of Windows.

  In the end, I care retrieves the contents of the disc, although it would be great if I could lend my laptop for a few weeks with "its files" until it sorts how to replace the laptop.

  Can I get the player Win7x64 working on the laptop computer of replacement by reinstalling Win7x64 on this laptop? I'm not "means a clean install/reformat, but have rather the Setup program detects an existing installation, and do its magic to get the operating system runs on new hardware?"

  I know that this raises questions of MS licenses. If the installation process could get his old system running on the laptop replacement, if I have a small window of time completely to access his files before being forced to re-register the OS? I'm hoping so.

  I'm looking for only a short-term solution - I do not recommend that he hopes that drive long term because the laptop got quite truncated of the accident, and once he gets a new laptop it will have everything he needs on this subject (OS, licenses, etc.). If I have a small window of time where I can simply copy their important files, or to lend him my laptop with its player and him can bring to its domestic network and the print out of all the things that are important, that it's going to be all together to move them to a new laptop when it is available.

  Thank you

  Hello

  You experience this problem because of the permissions applied to these s folder.  To resolve this problem, you will need to take ownership of these files and folders.

  Method 1: You can follow the steps mentioned in the link below to take possession of the records

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  (Article above applies to Windows Vista, not valid for Windows XP)

  Also check out the article below

  How to capture a file or a folder in Windows XP
  http://support.Microsoft.com/kb/308421

  Method 2:  You can try a custom installation (not a format\clean facility).

  See the link below for custom installation
  using the install option custom without formatting the hard drive

  Note: In custom installation only data would be transferred in Windows. Drivers, applications and the old folder will need to be reinstalled.

• OEM PC upgraded with SSD, is back on the HARD drive, now 'infringement '.

  Hello

  A few years ago, I bought a cheap "emachines" for parents.  To speed it up, I recently replaced the HDD with a SSD former and re-installed windows from scratch since an ISO downloaded from Digital River.  I forgot if it is 32-bit or 64-bit.  I called the helpline automated from key OEM cannot be activated online and everything went well.

  A few weeks later the PC is regularly crashing, which I suppose is a problem with the SSD drive.  Then I advise them to put the old hard drive back, they have carried out.  Windows complains now that it is not authentic.

  Apart from re - install from scratch, I can do to convince windows that OEM key is always authentic?  It is still used with the same motherboard and according to this article on PC pro, the key is tied to the motherboard and it is perfectly fine to change the hard drive.

  Thank you very much!

  Jonathan.

  The MGA output:

  Diagnostic report (1.9.0027.0):

  ------------------------------

  Validation of Windows data-->

  Validation code: 50

  Code of Validation caching online: 0x0

  Windows product key: *-* - WJ2H8 - R6B6D-7QJB7

  The Windows Product Key hash: ckKNc + BBPDWmo1LUlOkraNjlQ34 =

  Windows product ID: 00359-OEM-8992687-00006

  Windows product ID type: 2

  Windows license Type: OEM SLP

  The Windows OS version: 6.1.7601.2.00010300.1.0.003

  ID: {DCFF729B-C635-4FA1 - 813E-}

  Admin: Yes

  TestCab: 0x0

  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Product name: Windows 7 Home Premium

  Architecture: 0 x 00000009

  Build lab: 7601.win7sp1_gdr.130828 - 1532

  TTS error:

  Validation of diagnosis:

  Resolution state: n/a

  Given Vista WgaER-->

  ThreatID (s): n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  File: No.

  Version: N/a, hr = 0 x 80070002

  WgaTray.exe signed by: n/a, hr = 0 x 80070002

  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  OGAExec.exe signed by: n/a, hr = 0 x 80070002

  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->

  Office status: 109 n/a

  OGA Version: N/a, 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Office Diagnostics: 025D1FF3-364-80041010_

  Data browser-->

  Proxy settings: N/A

  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)

  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe

  Download signed ActiveX controls: fast

  Download unsigned ActiveX controls: disabled

  Run ActiveX controls and plug-ins: allowed

  Initialize and script ActiveX controls not marked as safe: disabled

  Allow the Internet Explorer Webbrowser control scripts: disabled

  Active scripting: allowed

  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->

  Office details:

  Content Spsys.log: 0 x 80070002

  License data-->

  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition

  Description: operating system Windows - Windows (r) 7, channel OEM_SLP

  Activation ID: d2c04e90-c3dd-4260-b0f3 -.

  Application ID: 55(c) 92734-d682 - 4 d 71-983e -.

  Extended PID: 00359-00178 - 926 - 800006-02 -.

  Installation ID: 002276701125035581948993383723

  Processor certificate URL: http://go.microsoft.com/

  Machine certificate URL: http://go.microsoft.com/

  Use license URL: http://go.microsoft.com/

  Product key certificate URL: http://go.microsoft.com/

  Partial product key: 7QJB7

  License status: Notification

  Reason for the notification: 0xC004F057.

  Remaining Windows rearm count: 3

  Trust time: 21/04/2014 20:09:09

  Windows Activation Technologies-->

  HrOffline: 0x00000000

  HrOnline: 0xC004C533

  Beyond: 0 x 0000000000000000

  Event timestamp: 4:21:2014 18:44

  ActiveX: Registered, Version: 7.1.7600.16395

  The admin service: recorded, Version: 7.1.7600.16395

  Output beyond bitmask:

  --> HWID data

  Current HWID hash: LgAAAAEAAwABAAEAAAABAAAAAQABAA

  Activation 1.0 data OEM-->

  N/A

  Activation 2.0 data OEM-->

  BIOS valid for OA 2.0: Yes, but no SLIC table

  Windows marker version: N/A

  OEMID and OEMTableID consistent: n/a

  BIOS information:

  ACPI Table name OEMID value OEMTableID value

  APIC

  FACP

  HPET

  MCFG

  WDRT

  LASRYVITRAGE

  AWMI

  SSDT

  Nevermind, I followed the steps detailed here and it seems to be the real / active again!

  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

  Also used for the first time windows remote assistance, which was very neat!

• Windows XP start error after access to the hard drive from another computer

  Computer laptop Windows XP went bad because of a bad graphics card.  Bought a new computer at the same time with Windows 7.  Pull the hard drive of the laptop to get the files back.  Had to change the permissions to grant access.  Now when I try to start the windows XP laptop, I get a "windows cannot load the user's profile but you has logged on with the default profile" and then a "windows Explorer has encountered a problem" appears and I can't do anything with it.  When I select 'close' the screen goes gray, then the same message appears.  I have to use the Task Manager to restart.  I did a repair of my XP install disc and also a system restore and still the same problem.  Help!

  Also, running service pack 3 before the repair.  Now on service pack 2 that I cannot access windows update to get updates.

  Computer laptop Windows XP went bad because of a bad graphics card.  Bought a new computer at the same time with Windows 7.  Pull the hard drive of the laptop to get the files back.  Had to change the permissions to grant access.  Now when I try to start the windows XP laptop, I get a "windows cannot load the user's profile but you has logged on with the default profile" and then a "windows Explorer has encountered a problem" appears and I can't do anything with it.  When I select 'close' the screen goes gray, then the same message appears.  I have to use the Task Manager to restart.  I did a repair of my XP install disc and also a system restore and still the same problem.  Help!

  Also, running service pack 3 before the repair.  Now on service pack 2 that I cannot access windows update to get updates.

  You have another administrative user you can connect to the system with and change the owner and permissions on the folder Documents and Settings of the other user with?

• WIndows 8.1 does not start from the HARD drive

  Put a new WD HDD in a Samsung laptop. Install windows 8.1 form DVD and restart get an error "tried all options press F4 to start recovery.

  He wants to boot from the DVD, but I have the HARD drive as the number of boot option in the bios. What's new?

  The symptoms you describe seem to indicate that the startup information has been lost of the HD.  The HD is faulty or something destroys the startup information.

  Try to do a repair from the installation DVD.

• Install windows 7 on SSD and keeping it legal?

  The 750 GB HARD drive on my laptop is completely died on me last night. I have a key true windows 7 on my laptop.

  I did not create a recovery disk, but I met an OEM System Builder Windows 7 disc. I just install windows 7 on my new SSD and use the same key on the bottom of my laptop with no problems? I want to make sure that it is legal and it won't bounce as duplicate a product key.

  BTW, the laptop is a lenovo z570 if that makes a difference.

  Usually, it is quick and easy thanks to the automatic line and no need to talk with a real person. If it doesn't go to a real person, I've had them ever question me at all. Explain the situation and they give me an activation code.

  But, it should activate automatically if this is the first time that you have reinstalled.

• How to install Windows without recovery disc - Satellite A660 with new HARD drive

  Hey,.

  Portable 500 GB HDD of my friend Toshiba Satellite A660 seems to have died.
  I tied him to my laptop on a sata dock and runs a data recovery program because nothing has been saved. The recovery takes forever, however, and she really needs his computer to work.

  Because the hard disk may be damaged in any case, I am considering buying a new hard drive and install in the Toshiba.

  How can I do this without a recovery disk, though?
  The old drive was a partition recovery on it, I think, but this seems useless with a new drive.
  Operating system is Windows 7 64 bit home edition.

  The product key is on the bottom of the laptop.
  I live in Turkey and so I don't think there is a Toshiba store is close.
  There are individual computer stores, so I'm confident, I can buy a new internal hard drive (I could find the sata dock here), but he must know what to do to install the software, etc.

  Thank you!
  Chris

  > How can I do this without a recovery disk, though?

  You either have the recovery disk or you are going to install the system using the Microsoft Windows disk.
  The necessary drivers are in internet on Toshiba UE page.

  The recovery disc can also be ordered here:
  http://backupmedia.Toshiba.EU/landing.aspx

• How to clean safely on certain files and programs if the C drive is full.

  Vista problem?  How to free up more space.  I have several thousand photographs and I can delete some people.

  Will I need to buy more memory?

  Hello

  see if this program helps you to determine what is take up space

  http://www.Jam-software.com/treesize_personal/

  by default system restore will have up to 15% of the capacity of the hard disk

  you would like to reduce this amount

  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html

  http://www.vista4beginners.com/system-restore-space-used

  also use disk cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  also scan for malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  and read these information from microsoft on windows optimization

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

• Windows 8 fact Full Reset will reformat the HARD drive and delete the Partitions?

  Hello

  as well as the State title,

  1 *-Although do a Factory Reset in Windows 8 or 8.1 reformat my HARD drive and delete my partition? OR

  2 *-my Partiting created will remain untouchable with all the files I have storage here?

  Thank you in advance...

  Hello

  as well as the State title,

  1 *-Although do a Factory Reset in Windows 8 or 8.1 reformat my HARD drive and delete my partition? OR

  Only the drive on which Windows 8/8.1 is installed will be formatted, other partitions or hard drives will not be formatted.

  2 *-my Partiting created will remain untouchable with all the files I have storage here?

  Yes, it will remain unchanged.

  Thank you in advance...

• This copy of Windows is not activated. After replacing the hard drive. The activation window is empty.

  The activation window is empty. XP Pro SP3 + System (2 updates the version) beta of SP4 added due to problems of program. Build 2600.xpsp + sp3_gdr_101209-1647(Service Pack 3). Problem started after the replacement of the boot hard drive that wasn't. New drive has been a ghost of the old boot copy and active. Having the disk key and product to install but the CD won't deal with any problems indicating that the version of the program is different, probably because of upgrades SP. The program disk is that Windows XP Professional Service pack 2 Version 2002, Ref. 0304 x 10-52217 and has passed many tests for over the years of downloads genuine microsoft software. IHAVE run the MGADiag tool, results are pasted below. Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Release status: not activated
  Validation code: 1
  Code of Validation caching: n/a
  Windows product key: *-* - JK2RH - 233D 2-3466Y
  Windows product key hash: OyO/XO7E87J9EWmQwi2V5iTugIo =
  Windows product ID: 76487-016-5418163-22306
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 5.1.2600.2.00010100.3.0.pro
  ID: {4405CF79-6516-4ACC-85B5-1CAEA4F69ADB} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: Registered, 1.9.42.0
  Signed by: Microsoft
  Product name: n/a
  Architecture: n/a
  Build lab: N/A
  TTS error: n/a
  Validation of diagnosis: 025D1FF3-230-1_025D1FF3-238-2_025D1FF3-258-3
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a
  Version: n/a

  Windows XP Notifications data-->
  Caching of results: 1
  File: Yes
  Version: 1.9.40.0
  WgaTray.exe signed by: Microsoft
  WgaLogon.dll signed by: Microsoft

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: 2.0.48.0
  OGAExec.exe signed by: Microsoft
  OGAAddin.dll signed by: Microsoft

  OGA data-->
  Status of office: 101 non-active
  Microsoft Office XP Professional - 101 non-active
  OGA Version: Registered, 2.0.48.0
  Signed by: Microsoft
  Office Diagnostics: 025D1FF3-230-1_025D1FF3-238-2_025D1FF3-258-3_3E121E02-385-80004005_3E121E02-452-80004005_3E121E02-312-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE; Win32)
  Default browser: C:\Program may Explorer\IEXPLORE.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: fast
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: fast
  Allow the Internet Explorer Webbrowser control scripts: allowed
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {4405CF79-6516-4ACC-85B5-1CAEA4F69ADB}1.9.0027.05.1.2600.2.00010100.3.0.prox 32*-*-*-*-3466Y76487-016-5418163-223065S-1-5-21-1202660629-362288127-839522115HP Pavilion 061ED848AA-ABA M7287CPhoenix Technologies, LTD 3.1720060420000000.000000 + 000237E32870184FA7C04090409Time(GMT-08:00) Standard Pacific03101101109117730D9B1B7FBEYAcQ79PePEvIKqvGGLVZKjuipo =54186-752-4095971-17653 1 Microsoft Office XP Professional

  License data-->
  N/A

  Windows Activation Technologies-->
  N/A

  --> HWID data
  N/A

  Activation 1.0 data OEM-->
  BIOS string matches: Yes
  Marker of the BIOS string: 1E0D3:Compaq Computer Corporation | 1E0D3:Compaq Computer Corporation | 1E0D3:Hewlett - Packard Company. 1005F:Hewlett - Packard Company
  Marker of OEMBIOS string. DAT: N/a, hr = 0x80004005

  Activation 2.0 data OEM-->
  N/A

  Hello

  • Do you have any disk of Windows XP?
  I'd say contact Microsoft phone support for assistance.
   
  Here is the link:
  http://support.Microsoft.com/kb/295539