Is it possible to add a time stamp to a server to JavaScript code?

Similar Questions

• How to add a time stamp to a PDM file

  I need to add a time stamp to my PDM file.  Currently, I take an array of doubles, their conversion to a type of dynamic data, then send to tdms_write.  I have to add a timestamp, but I can't find a way to do it.  I also tried holding the timestamp, converting it into a doube, U64 and I64 and adding that to my table before the dynamic data conversion type, but when I lose precision.  I need to have at least millisecond resolution.  I know that I lose accuracy because the timestamp is two 64-bit values.  top 64-bit are set to seconds since the epoch and lower 64 bit are fractions of a second.  I would even send these two numbers divided in my happy tdms file and conversion at a later date, but can't seem to do it again.  Any help would be appreciated.

  The natural way would be using a waveform.

  You can add your timestamp as two U64 (using cast to array U64) as properties of the channels as data t0.

  Tone

• Is it possible to add a timer of inactivity in a folio? To return to the screen in "folio"?

  I would like to be able to add a timer on the folio pages back to the home screen if the iPad remains inactive. Any ideas on how to make this happen in InDesign CC?

  It's not a way to do this with DPS.

  Neil

• Is it ok/possible to add a GUI to my ESX server service console?

  Can I download one of the lightest LINUX GUI and run it from the service console?  Also, how to connect using putty?  Should be on licence somewhere?

  You can add a graphical interface on the ESX console... Can be... but be careful that the console has only a limited amount of Max (above 800 MB) memory and it has been optimized to manage your virtual machines. He is also set to always run on CPU0.

  If you interfaces graphics crashes... it could take down the management of all your virtual machines.

  So the question is "If you do that?", then the answer is no. you'd better not.

  It also cancels your support/warranty. Your ESX Server will be is no longer supported.

  If it's for an experience... go ahead... If you want to run production on this same host... don't even think about it.

  --

  Wil

  _____________________________________________________

  Visit the new VMware developers at http://www.vi-toolkit.com wiki

• mscorwks.dll, version 2.0.50727.4216, time stamp 0x4e154cee, exception 0xc0000005 code

  It's a zune ok ultima reader of troubling problem vista starts then crashes with this code
  .NET runtime version 2.0.50727.4216 - engine error fatal execution (64E5C60E) (80131506)
  another program called screen capture 1.1 gives this error

  Failed application screenshot.exe, version 1.1.0.0, time stamp 0x4e399727, failing mscorwks.dll module, version 2.0.50727.4216, time stamp 0x4e154cee, exception 0xc0000005, offset 0 code x 00015320, default
  process id 0 x (null), application start time 0 (null).

  using a 3rd party event last viewer code error when I try to load in the event viewer

  Failed application mmc.exe, version 6.0.6002.18005, time stamp 0x49e01c0a, failing mscorwks.dll module, version 2.0.50727.4216, time stamp 0x4e154cee, exception 0xc0000005, offset 0 code x 00015320, default
  process id 0 x (null), application start time 0 (null).

  Oh lordies you please help a dumbafied computer user who is disabled cant work and plays the mad games Facebook ty

  Hello

  If you have problems in the Zune player, then I suggest you to send your request here: http://answers.microsoft.com/en-us/zune/forum

  1.1 screenshot and Facebook is also a non-Microsoft program, so I suggest you get in touch with the respective support.

  Hope this information is useful.

• Is it possible to add the stamp tool in the menu bar?

  I would like to add the stamp tool, which is available on the Tools page for my bar menu for easy access. Miss me probably something simple, but I can't figure out how to make this happen.

  Hi benw23104454,

  I'm sorry that it is not possible to add the stamp tool in the menu bar. Its a part of the comment tool & returns once you click on the feedback tool.

  Kind regards
  Nicos

• Is it possible to have a watermark WITH a dynamic time stamp included?

  Our customer representative asked if we can create PDFs (generated from our web application) which not only includes a watermark (that we now using a png image), but a watermark containing a dynamic time stamp.

  I know that we can add these separately, but he wants the watermark itself be dynamically stamped... I know that this can be done via an image as a PNG, but y at - it another way to do this in a PDF file?

  Thank you!

  It seems that this problem has been resolved.  Developer apparently 'cut of the image in bytes, then transformed into a graph, using Java to add to the parking meter"

  Thanks for your replies!

• seconds of falling for the time stamp

  I guess someone has had this problem before, but do not see in the forum anywhere.  I add a timestamp in a file so I used the 'get time in seconds' and connected to a "convert to DBL.  Then this son in an indicator on the façade and in the Express VI "write to a measurement file.

  The indicator shows the time stamp very well, but in the file it puts it in scientific notation and cut the last 4 digits and fractions of a second.  Timestamping writes to the file every 5 seconds, so it is important to have the rest of the time stamp included.  I tried using probes on wires to see where things are weird but I get the same value truncated in the wire before and after the flag.  I thought it had something to do with the VI Express first, given that the indicator is fine, but with her truncated in the thread, it seems that the Express VI is indeed record exactly what is given to... but then again the indicator... you can see that I've been running in circles in this!  Someone knows the reason why he does this and a possible solution?

  Thank you very much!

  
  

• Is it possible to keep the timer "always on top"?

  When you use the timer I like to keep the timer of disappearing from the screen saver, but I didn't understand how to do... If that's possible.  After the timer starts, he goes down to a few seconds and the clock face appears again.  To check the time remaining on the timer, you must click to the home screen and select new application timer... which, in few seconds again goes to the background and the face of the clock reappears, again he must open the clock app to see the remaining time.  If there is a way to keep the timer "on-top" without having to repeatedly touch the screen during execution of the timer, I have not discovered.  I would also add the timer to my eyes so I can toggle to him as well.  Of course, I can do it on my iPhone, but the Watch has not yet this ability.  Apple engineers could make sure with the timer and the timer if they see the need.  Are there others who want that ability as well?  I think so.

  Hello

  It is not currently possible to add Timer looks. However, your watch can be configured for more convenient use of the application of the timer:

  • Set your watch to return to the last app used to raise your wrist:
    • On your iPhone, in the application of the watch, go to: Watch My > General > wrist Detection - turn on.
    • On your iPhone, in the application of the watch, go to: Watch My > General > screen Wake:
      • Raise the topic on the wrist, select RESUME last activity.

  After you start a timer by opening the timer app, your watch will return to timer (for as long it remains the last app used) when you then lift your wrist.

  • Add a Timer to your dial of the watch as a complication. When you view the time on your watch:
    • Firmly press the display > drag left / right to the face of the watch you want to customize (not to slip if you want to customize the current face of the watch).
    • Press the Customize button.
    • Some watch faces offers more than one screen customization options > move left until you reach the last screen to select (if available) complications.
    • Tap a complication to customize what is shown in this place.
    • Turn the digital Crown to scroll through available there complications until you reach Timer.
    • Press the digital Crown, then press the dial to return.

  To start the timer directly from your watch dial, press the complication. Once started, the remaining time will be then showed complication on your watch until the end of the timer dial, when the application opens for you to make them disappear.

• Time-stamped comments adding in a DDHN file during logging

  I'm trying to find the best way to add comments in a DDHN file during logging.  I know that the fragmentation occurs when the properties are written for TDMS logging.  Should I write comments in the level in the logging file (maybe a case of Structure fires when a new comment occurs) or is there another way to incorporate comments into a DDHN file during logging that I'm missing?  Any help would be appreciated.

  Nathan, do you really care about fragmentation? If this isn't the case, you could do it just like that. If you really care fragmantation, you could write Time-Stamped comments in a separate file, PDM, or any, Time-Stamped cache and write cached put comments in the PDM file after cutting.

• TDMS of MDF time stamp conversion error / storage date time change

  I fought it for a while, I thought I'd throw it out there...

  Let's say I have a file TDMS which has a channel of labview time stamp and thermocouple 2.

  

  I load in DIADEM, I get this:

  

  Perfect!  But now let's say I want to save the PDM as a MDF file so I can see him in Vector sofa.  I right click and save as MDF, perfect.  I started couch and get this:

  

  The year 2121, yes I take data on a star boat!  It seems to be taking the stamp of date/time storage TDMS as starting point and adding the TC_Timestamp channel.

  If I change the channel of TC_Timestamp to 1, 2, 3, 4, 5, 6, 7 etc... and save as MDF, I get this:

  

  Very close, 2012!   But what I really want is what to show of the time, it was recorded what would be the 10/09/2012.

  The problem is whenever I do like recording, date storage time is updated right now, then the MDF plugin seems to use it as a starting point.

  is it possible to stop this update in TIARA?

  

  Thank you

  Ben

  Hi Ben,

  You got it right that the MDF use written the time of storage to start MDF that is updated by DIAdem when writing time. We are working on this and will return to you, if there is no progress.

  To work around the problem, you can try convert TDMS MDF in LabVIEW storage vis.

  Something like the following, you can write your start time of measurement to the MDF file.

  

  Hope this helps,

  Mavis

• file lvm recorded with time stamp graphic display

  Hello

  I have headaches display my data with correct timestamp. There are so many methods to save the data. Here, I decided to save it in a text delimited as lvm. a screenshot of my vi segment is attached. I want to use this way rather than other methods is the flexibility it offers. I'll be able to add more data to store that I develop the vi. (So I'm storing data of the DAQ assistant and my calculated values.) I've attached a screenshot of the file I also read.

  I would use another vi to open this file and it draw a chart/graph to show a trend of the acquired data. Can someone pls Advisor mid on which is a better way for mi to do?

  Thank you very much!

  POH

  Hi Malou,

  Sorry for the late reply, I was rushing to complete my project, has not been able to answer.

  Yes, I managed to solve it. In any case, I've used this high rate in the acquisition of data wizard is to allow the acquisition of continuous mode & use a software filter instead of filter material. However writes to the folder this way - write string in .lvm, max is 10 samples/s unless I have use tdm (I'll then everything in the newspaper).

  I was not able to display the correct timestamp was due to the fact that I have does not add to the timestamp of the start time for the timestamp in waveform display. I won't be able to go down to my lab, & my machine have no LabVIEW, so what I do is to extract some parts of my report to share.

  For the part that I used to display the graph (can be seen on the attachment), I deleted the 1st column, which is the time stamp (for display of the spreadsheet), but extract the 1st element - convert timestamp DBL it when I start recording in the DAQ vi (written with the header).

  This excerpt (which could be considered as a group of numbers in the file lvm) and converted to the type timestamp and wired for generating waveform block, providing the start time of the wave.

  Then I replace the use of the chart with graphic, graphic is suitable for data acquired and graphic tracing is better for the time of execution of the data display. now it seems to work fine for me, except for the load time may take some time for larger files.

  Thank you for your participation in this thread!

  See you soon!

  POH

• How can I add a date stamp to a picture after it's already been downloaded in a file?

  A client asked I have add a stamp to date of photos already in a file. Can I go back and add a date to these pictures?

  If you want to add a date stamp on the face of the
  photos... the following free software can be useful to
  a try.

  FWIW... you can add the date corresponding to one
  or a batch of photos using the free software
  FastStone Image Viewer.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  FastStone Image Viewer
  http://www.FastStone.org/FSViewerDetail.htm

  I suggest that you create a new folder and add
  copies of your photos for experimental purposes.
  If you are unhappy with the result your originals
  will be intact.

  "Basic steps to add dates to image files.
  using Fast Stone Image Viewer'...
  (FWIW... it's easier to do than to explain)

  (You may need to experiment with the post office, police
  size, color and different Variables to achieve
  the desired result).

  Tools / open the Batch Conversion / tab Batch convert...

  Check the box... Use of advanced options...

  Advanced Options button / tab text.
  Check the box... Add text...
  (If the white field has any text inside...
  by selecting erase it and press your delete key...

  Open the window drop... "Insert a Variable."
  choose... EXIF DateTime / Date and time... Ok...

  Browse for the files you want to attach... Select
  them and on the left, click on the Add button...

  Choose an output Format...

  Choose an output folder...

  Check the "Rename..."

  Click on the button convert...

  When the files are converted... Click done...

  Now go to your backup folder and see the result...

• How to date and time stamp picture my photo printed folder

  How can I sign up date and time on my impressions from my picture folder?

  How can I sign up date and time on my impressions from my picture folder?

  ==========================================
  The following instructions will prepare photos
  with the EXIF Date/time stamp then you can print
  them.

  FastStone Image Viewer freeware can add
  EXIF Date/time in the face of your photos in a batch.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  FastStone Image Viewer
  http://www.FastStone.org/FSViewerDetail.htm
  (Windows XP / Vista / 7)

  I suggest that you create a new folder and add
  copies of your photos for experimental purposes.
  If you are unhappy with the result your originals
  will be intact.

  After FastStone is downloaded and installed...
  Open the program and go...

  Tools / open the Batch Conversion / tab Batch convert...

  Check the box... Use of advanced options...

  Advanced Options button / tab text.
  Check the box... Add text...

  (You will need to experiment with the position and the police
  size and color to get the desired result.)
  (the text size will need to be adjusted according to the)
  the size of the photos)

  Open the window drop... "Insert a Variable."
  choose... EXIF Date Time / Date and time...
  (in the white field you should see ($H1)
  Left click... Ok

  On the Batch tab convert... in the left field...
  Left click the square button "select the Source folder.
  Find and select the photos you want to
  Add.

  Left, click on the Add button to move the files to
  the right field.

  Choose an output Format...

  Choose an output folder...

  Click on the button convert...

  It's much easier to do than to explain then
  give it a try before say you "Good Grief... it's too
  a lot of work.

• Is it possible to add columns to explore details view customization

  Under XP it is possible to add columns for Windows Explorer details columns that are not the default choice?  I want to add a column "written by" and "reviewed by" and preferably have the name of the preparer (or reviewers) or initials and a date stamp

  Hello

  I suggest you to post your query in development issues General Windows Desktop for better eon helps the concern: http://social.msdn.microsoft.com/Forums/en-US/windowsgeneraldevelopmentissues/threads