mscorwks.dll, version 2.0.50727.4216, time stamp 0x4e154cee, exception 0xc0000005 code

Similar Questions

• KERNELBASE.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdbdf Exception code: 0xe0434f4d fault offset: 0x0000b727

  Hi all just make me this error with KernelBase.dll, what happens to my end of the application, is that I am using .NET Framework to determine if network connectivity is available, to raise an event from a dll underlying to notify the application when network connectivity is established, or network connectivity is not available. Nothing really special here just using standard stuff of .net framework here.  Have seen similar incidents withKERNELBASE.dll reported, but nobody of really give any info on which exception 0xe0434f4d is a code.  Knowing what would be the execption, would allow me to find a quick solution to the problem. BizTalk seems to have a similar problem with KERNELBASE.dll. 

  Additional information that may help is that I am under the .NET application on a Windows 7 computer less than 100 MB of storage space, well below the recommended minimum of 300 MB, but test the .NET to test application it is now. This should work if Windows 7 does not work.

  Here is the excerpt from the Windows application log:-

  Name of the failing application: INNOBATE Antivirus.exe, version: 1.0.0.11, time stamp: 0x4c9b2d79

  Name of the failed module: KERNELBASE.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdbdf

  Exception code: 0xe0434f4d

  Offset: 0x0000b727

  ID of the process failed: 0x27d4

  Start time of application vulnerabilities: 0x01cb5b0ba112d3af

  The failing application path: C:\Program Files (x 86) \INNOBATE Limited\INNOBATE® AntiVirus 2011 Home\1.0.0.0\INNOBATE Antivirus.exe

  Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll

  Report ID: 44a2d8f1-c6ff-11df-88ee-001d7d99d5fa

  Fault bucket 2039362628, type 1

  Event name: APPCRASH

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: INNOBATE Antivirus.exe

  P2: 1.0.0.11

  P3: 4c9b2d79

  P4: KERNELBASE.dll

  P5: 6.1.7600.16385

  P6: 4a5bdbdf

  P7: e0434f4d

  P8: 0000b 727

  P9:

  P10:

  Attached files:

  C:\Users\PCX\AppData\Local\Temp\WER564D.tmp.WERInternalMetadata.XML

  These files are available here:

  C:\Users\PCX\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_INNOBATE Antivir_64c1975bd6fee9fd4d6050ca3ff88ae0134d5bfd_2ff3e37e

  Symbol of the analysis:

  Recheck for solution: 0

  Report ID: 44a2d8f1-c6ff-11df-88ee-001d7d99d5fa

  State: 1

  The failing application path: C:\Program Files (x 86) \INNOBATE Limited\INNOBATE® AntiVirus 2011 Home\1.0.0.0\INNOBATE Antivirus.exe

  Path of the failing module: \KERNELBASE.dllsyswow64 C:\Windows\

  Report ID: 44a2d8f1-c6ff-11df-88ee-001d7d99d5fa

  That tells me, that you are using a 32-bit program on a 64-bit Windows 7. AntiVirus tools must be 64-bit on a 64 bit OS. Install the 64-bit Version of your AntiVirus tool.
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Event ID: 1000 Faulting application devenv.exe, version 8.0.50727.762, stamp 45716759, failed module gdiplus.dll, version 5.2.6001.22319, time stamp 4a841b37, debug? 0, address of failure 0x0001bf5e

  My repeateedly of crash of visual studio 2005 in 10-20 minutes

  with the following error

  Event ID: 1000

  Failing application devenv.exe, version 8.0.50727.762, time stamp 45716759, failed module gdiplus.dll, version 5.2.6001.22319, time stamp 4a841b37, debug? 0, address failure 0x0001bf5e.

  Event ID: 1023

  .NET runtime version 2.0.50727.3615 - engine error fatal execution (7A2E1122) (0)

  Hi ashnov,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  Method 1

  I suggest that you install the updated drivers for the graphics card on the computer by visiting the card manufacturer or the manufacturer of the computer Web site to download and install the drivers, check if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Method 2

  If the previous step fails, then I suggest that you do the system restore and check if it works.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Method 3

  I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 4

  If the steps above fail, then reinstall the program and check if that helps.

• The failing application name: backgroundTaskHost.exe, version: 6.2.9200.16384, time stamp: 0x5010a827

  Why I get this error.

  Why I get this error.

  I also found the same mistakes repeatedly in my newspaper every 15 minutes on my new system.

  I decided to go with a Local account, so I did not sync services.

  WARNING: I am not a technician or professional support.

  Possible solution: uninstall box (if you need to synchronize with your Microsoft Account services)

  How to: Search for settings to laptop, then select search and Apps, then select sizes of App, select application box, and then click Uninstall. Now, wait 15 minutes and refresh you the application log.

• Vista Home Premium SP2 multiple APPCRASH associated the mscorwks.dll file

  Hi, I need help with the following:

  I have several applications crashing (for example: HP Media Smart, HP Health Check, ATI Catalyst Control Center, MYOB GST transitional Assistant), and they all point to the mscorwks.dll file (the same ID of locale and code exception).  The error message is " has stopped working" and it appears before the program even loads.

  Details of error among the APPCRASH s below:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: NZGSTAssistant.exe
  Application version: 1.7.0.0
  Application timestamp: 4cb7d7e1
  Fault Module name: mscorwks.dll
  Fault Module Version: 2.0.50727.4206
  Timestamp of Module error: 4bf4c6a7
  Exception code: c0000005
  Exception offset: 00076d 55
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 5129

  Description:
  Stopped working

  I did a registry cleaning (twice) with Uniblue registry, I did a complete audit of viruses and malware, and I also did all the latest updates in the hope that the mscorwks.dll/s file would be crushed and fixed.  I initially (a month or two back) had one coming program with this error at startup. I ignored it because I still use the program.  But since then, more programs have been crashes with this error message and now it's interfering with some frequently used programs.  Is there any simple solution for this?  Thank you!

  Hi, I need help with the following:

  I have several applications crashing (for example: HP Media Smart, HP Health Check, ATI Catalyst Control Center, MYOB GST transitional Assistant), and they all point to the mscorwks.dll file (the same ID of locale and code exception).  The error message is " has stopped working" and it appears before the program even loads.

  Details of error among the APPCRASH s below:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: NZGSTAssistant.exe
  Application version: 1.7.0.0
  Application timestamp: 4cb7d7e1
  Fault Module name: mscorwks.dll
  Fault Module Version: 2.0.50727.4206
  Timestamp of Module error: 4bf4c6a7
  Exception code: c0000005
  Exception offset: 00076d 55
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 5129

  Description:
  Stopped working

  I did a registry cleaning (twice) with Uniblue registry, I did a complete audit of viruses and malware, and I also did all the latest updates in the hope that the mscorwks.dll/s file would be crushed and fixed.  I initially (a month or two back) had one coming program with this error at startup. I ignored it because I still use the program.  But since then, more programs have been crashes with this error message and now it's interfering with some frequently used programs.  Is there any simple solution for this?  Thank you!

  Hey Chellse

  one of the worst things you can do for your computer is to use a registry cleaner

  the best you can expect is that it does not damage

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-click guest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  If the sfc finds issues it cannot repair consider to borrow a vista of microsoft dvd and do a repair installation upgrade

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Walter, the time zone traveller

• mscorwks.dll corrupt message found in the sfc results

  I cannot launch an application (Quicken) and was told to reinstall .NET Frameworks for my version of Windows 7 Home Premium.

  I've deleted and reinstalled, and it doesn't work.  I then tried the Microsoft Fix it 50736 and that has not worked.

  I ran the sfc verifyonly and sfc/scannow and found this message in two files.

  2013-07-13 17:20:12, 000002f0 CSI Info [SR] cannot repair the military record [l:24 {12}] "mscorwks.dll' of NetFx-MSCORWKS_DLL, Version = 6.1.7601.18140,
  pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope, neutral
  PublicKeyToken = {l:8 b:b03f5f7f11d50a3a}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch
  2013-07-13 17:20:12, 000002f2 CSI Info [SR] cannot repair the military record [l:24 {12}] "mscorwks.dll' of NetFx-MSCORWKS_DLL, Version = 6.1.7601.18140,
  pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope, neutral
  PublicKeyToken = {l:8 b:b03f5f7f11d50a3a}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch
  2013-07-13 17:20:12, 000002f3 CSI Info [SR] this element is referenced by [l:156 {78}]
  "Package_2_for_KB2833946 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.1.2833946 - 18_neutral_GDR.
  2013-07-13 17:20:12, 000002f6 CSI Info [SR] could not reproject corrupted file
  [ml:520 {260}, l:98 {49}] « \ ?? \C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727"\[l:24{12}]"mscorwks.dll ';
  source file in the store is also corrupted

  Other solutions?

  Try to perform a repair (upgrade locally) using a Windows 7 installation disc and check.

  http://support.Microsoft.com/kb/2255099/en-us

  Note: the programs and files will be retained after the upgrade on the spot.

  In addition, get in touch with Quicken support and check if there is a work around to get the software installed.

  http://Quicken.Intuit.com/support/

• Microsoftnet framework v2.050727 mscorwks dll could not be loaded

  I get a message drop-down almost every 10 minutes. When I'm on the computer saying C windows microsoft net frameworkv2.0.50727 mscorwks dll cannot be loaded.  I can't send emails from my already updated Windows live e-mail program, and I had to set up another email also. I want my old one back well, because he has a lot of storage folders I use... I have a Dell vista Home premium with service pack 2. How can I overcome this problem successfully.  Help, please.

  Hi Aud,

  Because you are always faced with the question, I suggest you do an InPlace Upgrade\Repair installation.

  Note perform a repair installation will not damage files and applications that are currently installed on your computer. However, before you perform an Inplace upgrade, you can take a backup of important data. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  To perform an upgrade in-place, follow these steps.
  a. close all running applications.

  b. Insert the Windows Vista/7 DVD in the DVD drive of the computer.

  c. in the settings window, click install now.

  Note If Windows does not automatically detect the DVD, follow these steps:

  Click on start and type Drive: \setup.exe in the box to start the search.

  Note: The placeholder drive is the drive letter of the computer's DVD.

  List programs, click Setup.exe.

  In the settings window, click install now.

  a. click go online to get the latest updates for installation (recommended).

  b. type the CD key if you are prompted to do so.

  c. Select the operating system on the page "Windows Installer" you want to increase the power or Inplace.

  d. click Yes to accept the Microsoft software license agreement.

  e. on the type of installation do you want? screen, click upgrade.

  f. when the installation is complete, restart your computer.

  For more information, please see the link:

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Once the upgrade has completed, you must activate your copy of Windows Vista.

  For more information about how to activate Windows, see the following article:

  Activate Windows 7 on this computer

  Since you are facing problems with Windows Live essentials, you can also post your query on Windows Live for help.

  Windows Live Support

  Hope this information is useful.

• application svchost.exe, module ntdll.dll, version 5.2.3790.4789, address 0x0006beb8 failure.

  One has the solution for this error
  Failing application svchost.exe, version 5.2.3790.3959, failed module ntdll.dll, version 5.2.3790.4789, address 0x0006beb8 failure.
  I get an error at startup
  This from Event Viewer:

  Event type: error
  Event source: app error
  Event category: (100)
  Event ID: 1000
  Date: 22/11/2011
  Time: 08:06
  User: n/a
  Computer: SRV03

  Hello

  ·         What operating system do you use?

  ·         What program are you using when this event occurs?

  ·         Are you facing any specific issue on the computer?

  Please provide us with more information about the issue, so that we can help you further.

  You can check this link that looks like the same question.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/faulting-application-svchostexe/1f90d246-b834-4E51-bd8a-89333edef0cf

• I can't open all the Web sites in firefox(version 25), its long loading time, help please

  I can't open all the Web sites in firefox(version 25), its long loading time, help please

  Hello, normally these problems are caused by a security/firewall software which does not recognize and therefore blocks the new versions of firefox: solve connection problems to websites after Firefox update

• Can I run two separate versions of the LabVIEW Run - Time Engine on a PC?

  Hello, I am curious to know if anyone knew if it is possible to install and use the two separate versions of the LabVIEW Run-Time Engine on a PC?  I have currently 2009 runtime engine installed on a machine, and I wanted to install the runtime for 2011 as well. I know that you can run two separate versions of the LabVIEW program on the same machine, but what about the Run-Time Engine?

  Thank you!

  No problem at all. I currently have the engines of execution for 8.2, 8.6, 2009, 2010 and 2011 on my computer. Multiples are no problem at all. Go ahead and load.

  Rob

• I can not installed any program, not even place dating 8007000 b error code from my windows, and for windows live menssenger error is Microsoft.VC 80.le CRT version 8.0.50727.42 _

  I can not installed any program, not even place dating 8007000 b error code from my windows, and for windows live menssenger error is Microsoft.VC 80.le CRT version 8.0.50727.42

  Do a system restore:
  http://www.SevenForums.com/tutorials/700-system-restore.html

  Try to repair:
  http://www.SevenForums.com/tutorials/3413-repair-install.html

• Failed Application spoolsv.exe version 5.2.3790.4759 failed module ntdll.dll version 5.2.3790.4789

  I have several printers installed Windows 2003 Standard Edition Server. Canon and HP. I noticed when I remote through Windows Remote Desktop my spooler is down and in the event viewer, I saw the following message

  Failed application spoolsv.exe
  version 5.2.3790.4759
  module failed Ntdll.dll
  version 53233790.4789
  failing address 0x0002a5a4

  Hi BDain,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server forum.

  http://social.technet.Microsoft.com/forums/en-us/winserverprint/threads

• Event ID: 1000 - Faulting application vstudio.exe, version 13.0.0.0, failed module msvfw32.dll, version 5.1.2600.5512, fault 0x0000a81a address.

  Failing application vstudio.exe, version 13.0.0.0, failed module msvfw32.dll, version 5.1.2600.5512, address failure 0x0000a81a. After execution of the application for a day or two, the application closes.  The event log has been as above.  I ran "sfc/scannow" but he has no apparent effect.  Nothing in the log of events to indicate any repaired or replaced file.  How do I know if msvfw32.dll is bad, and if it is, how do I replace it.   If this is not bad, what else could be the cause?

  You run Microsoft® Windows® Update?  There are a couple of security updates for Visual Studio, DirectShow and Quartz which involve the msvfw32.dll and vstudio.exe.  Try and let the forum know if this helped.

• Error when installing iTunes: Microsoft. VC80. CRT. Type = "win32". version = "8.0.50727.6195".

  I tried to download iTunes on my laptop and all at the end of installation, I get the error message: Microsoft. VC80. CRT. Type = "win32". version = "8.0.50727.6195". public key token = "1fc 8 b 3 b 9A 1e 18th 3B" ProcessorArchitecture = "x 86". See Help and Support for more information HRESULT: 0x8007054F
  Can someone please help me understand what it is?
  Thank you very much.

  Hi Dan,.

  Are you facing this problem with ITunes?

  I suggest you to follow the steps and check if it helps.

  Method 1: Download and install this Package redistributable Visual C++, then install iTunes.

  Download details: Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update

  Before you download this, check out am I running the 32-bit version or 64-bit Windows?

  Method 2: For Itunes, try the steps from the link to the following article and check if it helps.

  Problem installing iTunes or QuickTime for Windows

  If the problem persists, contact the Apple support and check if that helps.

  http://www.Apple.com/support/iTunes/

• Error 1935. An error occurred during the installation of Assembly 'Microsoft. VC80. OpenMPLtype = "win32", version = "8.0.50727.42.

  Error 1935. An error occurred during the installation of Assembly 'Microsoft. VC80. OpenMPLtype = "win32", version = "8.0.50727.42", publicKeyToken = "1fc8b3b9a1e18e3b", processorArchitecture is 'c86 '.  This is the error that I get trying to install Visual C++ 2005 Redistributable.

  Could someone point me in the right direction to solve this problem.

  Thank you so much more,

  Tom

  This is the wrong forum.  This forum is for the installation of Windows itself.  Please use the forum Vista programs

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs?tab=all

  or the Visual Studio forum

  http://social.msdn.Microsoft.com/forums/en-us/vcgeneral/threads