Similar Questions

• Is it possible to connect my Application ' Stop' button with the "Run" button of LabVIEW?

  Problem - one of my clients recently tested my new LabVIEW application and asked how the arrested LabVIEW application can be restarted without clicking on the "Run" (right arrow) button.

  Is possible solution - possible to connect my Application ' Stop' button with the "Run" button of LabVIEW?

  Thank you!

  Barry

  The big problem is in your Acquistion to stop audio event. You run the LabVIEW stop sign which is the equivalent of hitting the Cancel button in the toolbar.  (See contextual help on that).  You can stop the acquisition, but you don't want to stop your LabVIEW program.  You need this case in the event your computer to transition state in a sleep mode when you do not make any purchase.  Then hit the purchase button to start again transitions the machine state in the acquisition.

  In your case of program output, you want really to leave LabVIEW it.  You want to run and stop commands like closing the com port and one of these activeX references.  Then allow it to stop the while loop.  Turn the LabVIEW out outside the loop so that once everything is cleaned, your application may close.  You probably want to wrap this command in a case structure so that if you are in the execution environment, it leaves your application.  But if you are in the development environment, you don't want to cause your LabVIEW environment stop.  Another thing is that right now, you actually have a race condition in the Exit event.  The com port will close first or LabVIEW will come out.  There is no defined order of execution.

  Alternatively, you can have an event to close panel? in this way, you haven't accidentally short circuit all your program by pressing the X key.  You want to capture this event, discard it.  And if you want to not actually closed, did trigger the Exit Program button so that you can gracefully shutdown.

• Satellite A100 - 147 Compression file error with the product recovery disc

  I have Toshiba A100-147, just out of warranty. I tried to recover with a disk, disk unpack to 69% and then I get the message "ERROR READING OF COMPRESSION FILE (1). I have no choice but to click OK in the error message box, and then quit the recovery as she stops running.

  Any help would be extremely welcome.

  Hello

  It looks like a problem with the Toshiba Recovery CD.
  Have you tried to repeat this procedure?

  What of the HARD drive? You format the HARD drive using an original CD of XP MS?
  It s very interesting if a format of HARD drive could allows to perform the installation of the OS since the Toshiba Recovery CD.

  I remember that something like this has happened on my laptop s friend was not able to recover the operating system using the Toshiba CD. Finally, we found that some sectors on the HARD disk has been corrupted. Format drive HARD allowed integer and my friend was able to install the image of Toshiba.
  It's worth a try ;)

  But of course, this error could occur because of the faulty recovery CD.

• is it possible that a single screen will work with the slider and second focus mode

  Hello

  can you please tell me is it possible that a single screen will work with cursor mode and second focus mode.

  Thank you

  Hello

  I don't think that it is possible to change the mode of the development of your application outside of in the config.xml file.

  A custom extension may be able to do this, but I have not seen anyone this yet.

• LR 5.7 cannot find my files already edited because I accidentally deleted them. I have original and exported raw files edited JPEG images on an external hard drive. How do return on LR the possibility to repeat already published photos complete with the p

  LR 5.7 cannot find my files already edited because I accidentally deleted them. I have original and exported raw files edited JPEG images on an external hard drive. How to get back on LR the possibility to repeat already published photos complete with a history of editing? Thank you.

  Thank you Joe Maniac.  I deleted the original linked files on my internal hard drive which were dng files, but had copies of the raw files edited and edited the exported raw files (in JPEG format).  I don't have copies of dng files.  So what I ended up having to do was import the original raw files which then made a DNG copy on my internal hard drive.  The link has not changed, but now the files were back in the original track for missing photo alerts disappeared and I was able to see my change history.  The process has been painful, but without the dng, I had nothing to do a link to more if at least re-import them files has recreated the dng.  I don't know if there was an easier way, but it seemed that the problem did not the link deletion.  I use LR for a few years, but it was a rookie mistake, precipitated by my hard drive being so jammed up I ended up delete what I shouldn't.  I should have just moved the dng and the link to an external hard drive. Thanks again.

• Is it possible to have a picture light up with the mouse on?

  Hello I would like to know how to link to turn on when the user moves the mouse over the link? I have a Web site designed by someone and would like to know if the same thing can happen if the link is in fact an image? Is it possible to illuminate the image if the image background is transparent? See the following Web site http://www.x-filt.com at the top of the home page menu items on and contact us they light up but the XFL is an image with a transparent background, but does not illuminate. Do you need to do two images one without mouse and another which changes color or lights up when the mouse is over the image? I am a newbie to photo editing and javascript.

  Thank you

  You answered your question here. Mouse over effects are accomplished by switching between two images so fast that the brain is deceived into thinking that the image itself changes. Photoshop allows you to make images for mouse overs, but you must always provide code, generally JavaScript, and also a container generally a web browser to make the illusion.

• I just want to know if it is possible to go from flash to indesign with the same plan. I don't want to cancel, but I need to access a different program now.

  I'm no longer using Adobe Flash, but I now need access to the Indesign program. Is it possible to change, but keep the same plan that I currently use. I don't want to cancel and pay the fee if I have just produced.

  As I said, I doubt that they will allow this reasoning to stand as a reason for switching plans.  They don't base their plans on the temporary needs of the population.  They are more likely to encourage them to enroll in the student plan that includes applications... or possibly their more expensive monthly plan whatever, arguing your point here is not to matter as the decision rests with anyone contact you support.

• Is it possible to connect and reconnect a keyboard with the computer on?

  I have now 2 iMacs Office sitting side by side on my desk.  Since I want a keyboard with a numeric keypad on the right side, I found the only way to get that with an Apple keyboard with a USB connected keyboard.  Therefore, when I want to knit back and forth between macs, I have to unplug the keyboard of one and then plug it in another one - and back.  It would be a hassle to turn off mac whenever I need to do that, so I was wondering if it would damage a computer.  Two usb ports are usb powered external hubs.

  There is no problem with the device on a keyboard with the computer and plug in another.  It's only external drives that need to be removed before unplugging.

  

• Not possible to activate the scripts on the Web server

  Hello

  I would like to create a page .html for Web with a bit of scripting ESP included - Services because now I understand just this:

  <% for (i=0; i<3; i++) {
    ...some text...
   } %>

  According to this document NOR, I first need to enable scripting:

  To use the script with a Web service, you must enable the feature on the Web of LabVIEW server. In LabVIEW, select the script on the Web Server: Configuration page in the dialog box Options to enable the use of scripts on the Web server.

  I activated the Web server and it works OK. But there is nothing called "Scripting" in the configuration page - and the script is executed (the code is just printed in the form of simple text).

  Anyone know how to activate the ESP script?

  Version: LV 2012.

  Best regards, Jan

  Hi Jan,

  In fact, you use the ESP file instead of a static HTML file.  For example, if we had the static html file:

  Hello world

  This file can be located at something like /MyWebService/HelloWorld.html.

  If I then do something like have a page to say "Hello, Jan" or "Hello, Mark" I could use ESP.  In this case, your code might look like:

  <>

  var xname = form ['name'];

  %>

  Hello, @@xname

  The URL of such a web method is perhaps something like jan/MyWebService/Hellovar/Jan where Jan string literal passed to the terminal of a web method that can resemble

  

  In this example, the string "Jan" is passed to the terminal of the value of the VI.  What implementation of the Web method in the spec to build his signature might look like in /Hellovar /: value.

  So, back to your original question.  You embed not ESP breast and the HTML document.  Instead, you embed HTML inside a document of ESP and the rendering of the document in HTML format when accessing the URL of the Web method.  While the paper you mentioned earlier has an example project in that you can use as a reference

• Another possibility to communicate with the web service other than the SOAPS in Adobe Reader

  Hi team

  It is another alternative method to communicate with the web service other than the SOAPS using Java script in Adobe Reader.

  Thank you

  Bala

  Yes, you can use FDF/XFDF to send data to the server and report information in the document. Take a look at the Doc.submitForm () method using the FDF/XFDF parameter: DC-Acrobat SDK Documentation - Doc.submitForm () you'll need fields for send/receive form data, but these can be hidden.

• Is it Possible craate an application or an application with the oracle logo screen when we launch an app

  Hello

  I am new to Oracle MAF

  Can anbody tell me how to remove the oracle logo screen when we launch an application

  Thank you in advance

  Concerning

  Vincent

  Hello.

  The start screen is determined by the deployment of the application profile settings. To replace the default splash screen, you will need to produce a series of files PNG of different sizes and pixel density. The real needs of these files are explained in this section of the documentation of the MAF: http://docs.oracle.com/middleware/maf210/mobile/develop-maf/maf-deploying.htm#ADFMF927

  Once you have produced the images, simply copy you them to the appropriate resources from the application folder, subfolder and select in the "Images of the Application" section of the profile of the deployment, as shown here.

  

  Best regards

  Frédéric Desbiens

  Senior Product Manager

  Mobility and Cloud oracle

  Twitter: @BlueberryCoder

  blog: http://blogs.oracle.com/blueberry

• Mac Mavericks. Camera raw 9.1. Camera Nikon D810. How to set the default settings of the camera profile standard (now available after downloading the camera profile and copy it into the appropriate file)? Is it possible to apply also in the pictures showe

  Oops... did not write the question where I... How to set the default settings of the camera profile standard (now available after downloading the camera profile and copy it into the appropriate file)? Is it possible to apply too in images showed in the bridge? I'm a newbie in the forums and I'm not sure how to proceed.

  You can right click and copy the settings on an image that has the right profile. Then highlight all the images that you want to edit, right click and paste the settings. On the list that is displayed, simply choose the camera calibration.

• Is it possible to run a search/change on all the steps within a sequence?

  Is it possible to apply a find/change to all the steps within a sequence.  For example, if you want all instances of '27_' to "59_", is it possible in TestStand 4.2.1?

  Have you tried hitting "Ctrl" + "F" on your keyboard?  This is what I use all the time and you can find/replace with it.

• WIN OR LOSE ON THE 'GAME OF CHECKERS' YOU CAN'T PLAY ANOTHER GAME WITH THE SAME PERSON. IT IT IS POSSIBLE TO DO?

  PLEASE ANSWER MY QUESTION?  IS IT POSSIBLE TO PLAY ANOTHER GAME OF CHECKERS WITH THE SAME PERSON AFTER YOU HAVE PLAYED AGAINST THEM ONCE?

  Hi charles andrasko,.
   
  If you're talking about Internet ladies, yes you can.
   
  When a game is over, you can replay the same person, or you can play someone else by clicking the game menu, and then clicking on find a new opponent.
   
  Reference:
   
  Ladies of the Internet: how to play
  http://Windows.Microsoft.com/en-us/Windows7/Internet-Checkers-how-to-play

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is it possible for me to install Local DVD retailer with the product key?

  Original title: lost my product key.

  Hello everyone.

  2 years ago, I bought a Podium with a PC attached from a local retailer. He gave me a Windows 7 Pro Sp1 32 - Bit DSP OEI DVD 611 and the Podium and Win 7 was already installed on it. I have not found any key on or in the DVD box. No sticker on the PC or the Podium. He charged me $ 175, I'm from India up to 10 200 /-rupees for the DVD. Now I have to install this DVD on the Podium, or at least on my laptop. Is it possible for me to install this DVD with the product key or what should I do?

  Thank you.

  MS sells more than winxp or win7, you will only be able to buy peoples who have old stock or used, and it easily gives a copies pirated / illegal.

  The keys are not sold on their own, but only with the installation media.