Is it possible to assign the CD to an iso on a VMFS volume?

Similar Questions

• Is it possible to assign the DHCP pool to a specific SSID?

  Hi experts,

  I wanted to know if it is possible to assign a DHCP pool to a specific SSID on the Cisco Aironet 1142. If so, what commands do I need to implement?

  Thanks in advance.

  concerning

  Fari

  We can directly assign the DHCP for the SSID pool, we can map the SSID to a VLAN and this subnet VLANS can be configured for the DHCP pool...

  If this client that connects to the SSID will hit him VLAN and then this VLAN the DHCP is reset...

  On the access point, you can configure the DHCP pool or even on the switch or L3 device or server...

  Regrads

  Surendra

• Possible to assign the key to quick access to menu items?

  Hello

  I see that it is easy to assign a keyboard shortcut to a tool (I assigned K at the smudge tool), is possible to do for a command on a menu? I would like a key for Flip Horizontal canvas, which is located under the Image > Image Rotation > Flip canvas horizontal. I know that I can assign an Action, or use the Alt + I + g + H and then Ctrl + Z keys to go back, but only one key would be useful (possibly for the menu command in the future).

  Thank you!

  You can configure your keyboard shortcuts via: Edition > keyboard shortcuts

  Customize keyboard shortcuts in Photoshop

  

• Is it possible to assign the hand tool in Photoshop CS 6-button of the mouse/pen?

  Hello Forums out there,

  So many questions Monoprice to address here. Before receiving this tablet monoprice for my birthday, I used to use an old bamboo Wacom Bamboo Fun Touch CTH - 661. Pen of the only tablets, I used to be able to use the low pen button to select brush and pen switch high panoramic of the image, I was working on that.

  I get that... and now all I can do is can assign mouse buttons to the buttons of the pen, not the keyboard shortcuts. Now I can only use the low pen button (select brush) because the right click which makes appear. Not so much for the panning of the image.

  IMPORTANT!

  I have already contacted Support Customer Monoprice and dead. Please DO NOT suggest to return to them with this problem

  I ask people, is there any possible way to fix this?

  Thanks for your time and any help you can offer
  

  But the fact remains that this isn't a Photoshop problem and we cannot help you.  I tried to find links that might be useful, because we cannot be of direct assistance for you.  I've based my theory about them being new by the fact that I had never seen a reference to the Monoprice products after years of helping people on this forum and didn't know they still existed, but in recent weeks, we suddenly had a number of questions about them.

  My last disposable link was intended to clarify the situation and not a serious attempt to help.  The previous suggestions "were" a serious attempt to help, and it took several minutes looking for your problem for you.

  What particular Tablet do you have?  There keys Express, you can use instead of the bottom mouse button?  I own an Intus4 and 2 Companion Cintiq and find the keys to the invaluable Express.  With the Cintiq complementary 2 I use a small keyboard to the left and I have experimented with the use of a ShuttlePRO2 of outline drawings (I used usually only with Premiere Pro and After Effects) but it increases the usability of the Cintiq.

  If Monoprice pilots are flakey, and it seems that they are, then all I can say is you are trying to find workarounds until, if ever, they fix their drivers.

  Good luck.

• [JS CS3] Possible to assign the value of greekBelow?

  Hello

  I need to change the value via the script greekBelow, but don't see how to do it.

  The following line will give me a table for three values of greekBelow used in the performance display fast, typical and quality:

  var a = app.displaySettings.everyItem () .greekBelow;

  The line next-error because it won't assign a value to one of the numbers in the table:

  app.displaySettings.greekBelow [0] = 7;

  How make this changes the value or is it one of these preferences which can be script?

  Tom

  Hey!

  With your script, you can just get settings, but not put them because displaySettings is the array.

  // 0 is "Fast" // 1 is "Typical" // 2 is "High Quality"
  var a = app.displaySettings[1].greekBelow;
  
  // set greekBelow
  app.displaySettings[1].greekBelow = 10; // will set for "Typical"
  

  tomaxxi

• assign the session as the default value of a command prompt variable

  Hi, experts,
  
  is it possible to assign the session as the default value of a command prompt variable?
  
  I would attribute the full name of the user of the connection to the default value of a prompt!
  
  Thank you!

  In the value default of / writing SQL results:

  Select
  case
  When 1 = 2 then table.column
  of another valueof (nq_session.user)
  end
  the area"presentation".

  The table.column must be the type of character data.

  Concerning
  Goran
  http://108obiee.blogspot.com

• possible to retrieve the deleted vNIC MAC address

  Hello

  I deleted a vNIC and added a new vNIC in a troubleshooting session. The problem is that the server is picky about the MAC address due to licensing and now I would like to know if there is a way to recover the deleted vNIC mac address.

  Welcome to the communities.  I responded to this post in the AM, but it seems to have disappeared (back to maybe instant)

  1. identify the ESXi host the virtual machine in question feeds

  2. enable SSH on the host computer and the PuTTY as root

  3. navigate to the directory where the virtual machine is saved

  # cd/vmfs/volumes/path/to/vm
  Note: To determine the path your life of the virtual machine, you can watch the disc through the settings (vSphere Client), or run the following command:

  # vim - cmd vmsvc/getallvms | grep-i MyVMname

  4. to find the current and previous MAC addresses, run the following command:

  # cat./vmware*.log | grep MAC

  The output displays the date and time (in UTC) that each MAC address showed in the newspapers.

• It is possible to assign a shortcut to the operation "next style"?

  Or script?

  Hi, Mariana

  Yes. It is possible. See the solution here http://forums.adobe.com/thread/653530?tstart=0 . Peter Kahrel has solved this problem for me.

  Maria964

• Is it possible to assign a different sound to my second e-mail account?

  I have two email accounts set up and works fine in Thunderbird. My main account, which I use for almost everything and a second account that I use for video surveillance and I was wondering if it was possible to assign a different sound to the second account.

  You can try this addon, it seems to be mixed results.
  Hard to know if it had fallen to not properly configure the user.
  I have not used it myself, but it must be worth a try.

  • https://addons.Mozilla.org/en-us/Thunderbird/addon/mailbox-alert/

  How to install the Extension module:
  After you download addon extension *.xpi file to the downloads or desktop folder.

  In Thunderbird
  'Tools > "Add-ons"
  or
  'The menu icon ' > 'Add-ons'

  • Click the gear icon and select 'install module file.
  • Find the downloaded *.xpi file and click 'open '.
  • You have as much need to restart Thunderbird when you are prompted.

• Is it possible to assign a sound e-mail 'coming out' to a PC using mozilla?

  I have a sound for notification of incoming e-mail. Is it possible to assign a sound when I send an email from a PC?

  Not that I know, but why would you want a. You have a sending dialog box before you until the mail is gone.

• Assign the carrier on iPhone sim free

  Hi, I hope someone can help

  DESCRIPTION OF THE PROBLEM:

  I bought iPhone sim free 6s to Wal-Mart in the United States, recently, but planned to use in foreign carriers.

  When you pay at Walmart, asked me what phone carrier will be used on? But since I haven't decided yet which operator / plan will be more suitable for me I asked don't not to define the carrier at that time here.

  Now, I'm in Europe and I have the sim card by specific carrier and when I turned my iPhone and you try to save it on the network, it says INVALID SIM.

  QUESTIONS RELATING TO THE:

  1. is it possible to assign carrier to this iPhone right now - yes or no?

  2. If Yes:

  -who SHOULD do it?

  -What is the cost to do so?

  -What is the procedure to do so (it is only done through the site contact Web retailer, apple or iPhone must be shipped directly to the responsible party)?

  3. If there is not - what to do next? Any ideas?

  Of course, if clarifications are needed (imei, provider, country name), I post...

  Thank you for your support,

  If you tried to put a sim card into your phone and it came with invalid SIM card, it means that your phone is locked to the carrier that you have used previously that you bought the phone and only that carrier can unlock for you.

  When you bought the phone, what carrier sim did you use to activate the phone?  If you bought the phone at Wal-Mart and it was free and not unlocked sim, then it means that the phone freezes to the first carrier sim card that you insert into the phone, which looks like your phone has made.  We need to analyze this carrier to get your phone unlocked.  Only this carrier can unlock the phone.  Nobody else can.

• Not possible to use the Nvidia GPU both graphics primary source all the time?

  I went through the manual and the tips of help from Lenovo and it seems that it is not possible to use the NVIDIA GeForce 840 M, 2 GB as the exclusive GPU card.

  The only control that I can find is one in the Panel of 3D graphics and if I read this correctly it assigns that Nvidia will be used when require it strong application processes (I'm guessing games play?) but for activities such as photo editing, it is up to the intel sur-bard chip

  brian1208 wrote:

  I went through the manual and the tips of help from Lenovo and it seems that it is not possible to use the NVIDIA GeForce 840 M, 2 GB as the exclusive GPU card.

  The only control that I can find is one in the Panel of 3D graphics and if I read this correctly it assigns that Nvidia will be used when require it strong application processes (I'm guessing games play?) but for activities such as photo editing, it is up to the intel sur-bard chip

  To force an application to use your NVIDIA graphics card, right click on its shortcut (or an .exe file), point on run with graphics processor and select the NVIDIA processor high performance.

• Is it possible to change the name of data acquisition device?

  Hi all

  Is it possible to change the name of device of data acquisition in a pragmatic way?

  I wish I had at the beginning, when I start the data acquisition control a name that my .net program assigns to the DAQ card. Is this possible?

  Thank you

  Virginia

  Ashly thanks!

  Virginia

• Is it possible to change the values of particular #define of the various controls in CVI.

  In my application, I have different panels to file single .uir. When I save the .uir file, I get the same values of #define for different controls in different panels. For this reason, I am not able to use these #defines block switch. Is it possible to change the values of #define according to my condition.

  Hi, a little more Wolfgang post. It is the combination of the Panel to manage and control the unique ID: as you know, you can load the same panel more than once, so even if you recover the full chain of PANEL_CONTROL you have duplication. items that exactly identifies a particular control in a particular group are the combination control panel manage AND panel_control ID.

  On the one hand which guarantees more flexibility to your application, you can design only a few panels and reuse them whenever you want, even having some of them loded several times in the same instant. On the other hand, as you have discovered, there is the possibility (Finally, almost certain) duplicated in your app ID.

  To resolve the problem of duplicated IDS you can act in two ways:

  1. If you know that no Panel is never loaded several timer in your application, you can retrieve the name of constant of Panel with GetPanelAttribute (panelHandle, ATTR_CONSTANT_NAME, string); and to distinguish between the name of constant, then switch between control ID

  2. If you happen to have duplicate panels you will need to store each panelHandles in the non-volatile variables, switch between them and then switch between the control ID

  An alternative might be to use Panel callbackData attribute and assign a significant value during the loading of the Panel, other callbackData finally from a control ID. Something like this:

  Loading panels:

  panelHandle = LoadPanel (0, "myfile.uir", PANEL1);

  SetPanelAttribute (panelHandle, ATTR_CALLBACK_DATA, (void *) 1);   Assign different callbackData in each instance

  During the failover between controls:

  void * cbkd;

  GetPanelAttribute (panelHandle, ATTR_CALLBACK_DATA, &cbkd);)
  Switch (cbkd (int)) {}
  case 1: / / elements of the PANEL1
  switch (command) {}
  case PANEL1_NUMERIC:

  your code here
  break;
  case PANEL1_STRING:
  your code here
  break;
  }
  break;
  case 2:
  // .....
  break;
  }

  One final note: it seems to me that all this is necessary in a very limited situation, where you have the same callback called on various panels/controls. Whenever the reminder is unique to a specific panel or controls on a single panel you don't need to work that way.

• E4200: Possible to specify the name of the server, but not the IP?

  With the E4200, it is possible to specify name servers without giving configuration DHCP of the modem cable to the router and go to a real static configuration? I just need to change the servers of names, and while Windows offers this possibility to specify name servers without touching the IP, I can't find a similar option in the webpages of E4200. I really prefer to do in the router, then all devices conform. I know that the cable company rarely, if ever change the IP address, but I prefer not to chance it.

  That is right. In Windows, you can control the IP address and DNS servers regardless of Windows.

  This means that you can enter the IP address manually or let get automatically. You can also manually enter the IP address of the DNS server or keep it in automatic mode.

  I think that the Linksys router, you can assign the static IP address DNS server independently. This router can get IP address automatically from the modem so you can maintain the type of Internet connection for automatic configuration DHCP.

  Is there an option on Linksys router to set static DNS servers. Under the DHCP server settings, you will find static DNS1 and DNS2 DNS3.

  To assign or DNS servers specific to computers or other devices on your LAN, type the IP addresses of the DNS servers.