[JS CS3] Possible to assign the value of greekBelow?

Similar Questions

• Is it possible to change the values of particular #define of the various controls in CVI.

  In my application, I have different panels to file single .uir. When I save the .uir file, I get the same values of #define for different controls in different panels. For this reason, I am not able to use these #defines block switch. Is it possible to change the values of #define according to my condition.

  Hi, a little more Wolfgang post. It is the combination of the Panel to manage and control the unique ID: as you know, you can load the same panel more than once, so even if you recover the full chain of PANEL_CONTROL you have duplication. items that exactly identifies a particular control in a particular group are the combination control panel manage AND panel_control ID.

  On the one hand which guarantees more flexibility to your application, you can design only a few panels and reuse them whenever you want, even having some of them loded several times in the same instant. On the other hand, as you have discovered, there is the possibility (Finally, almost certain) duplicated in your app ID.

  To resolve the problem of duplicated IDS you can act in two ways:

  1. If you know that no Panel is never loaded several timer in your application, you can retrieve the name of constant of Panel with GetPanelAttribute (panelHandle, ATTR_CONSTANT_NAME, string); and to distinguish between the name of constant, then switch between control ID

  2. If you happen to have duplicate panels you will need to store each panelHandles in the non-volatile variables, switch between them and then switch between the control ID

  An alternative might be to use Panel callbackData attribute and assign a significant value during the loading of the Panel, other callbackData finally from a control ID. Something like this:

  Loading panels:

  panelHandle = LoadPanel (0, "myfile.uir", PANEL1);

  SetPanelAttribute (panelHandle, ATTR_CALLBACK_DATA, (void *) 1);   Assign different callbackData in each instance

  During the failover between controls:

  void * cbkd;

  GetPanelAttribute (panelHandle, ATTR_CALLBACK_DATA, &cbkd);)
  Switch (cbkd (int)) {}
  case 1: / / elements of the PANEL1
  switch (command) {}
  case PANEL1_NUMERIC:

  your code here
  break;
  case PANEL1_STRING:
  your code here
  break;
  }
  break;
  case 2:
  // .....
  break;
  }

  One final note: it seems to me that all this is necessary in a very limited situation, where you have the same callback called on various panels/controls. Whenever the reminder is unique to a specific panel or controls on a single panel you don't need to work that way.

• assign the value to a selection of the result of a query control

  I want to assign a value to my controls with the result of the query.

  It works for CFINPUT TEXT, but it does not work to SELECT

  I want to know are there any way tp affect my drop-down list value based on the result of questy.

  I have CFSTOREPROC as follows:

  < cfstoredproc procedure = "PSP" >

  < cfprocparam value = '#form. "IDNumber #" CFSQLTYPE = "cf_sql_integer" >

  < name cfprocresult = resultset "spResult" = "1" >

  < / cfstoredproc >

  < type CFINPUT = 'text' id = "txtIDNumber" value = "" #spResult.IDNumber # "/ >"

  I am able to name a TEXT of ENTRY CF as above the code value,

  < select id = "lstNumber" value = "#spResult.lstNumber #" > < / select >

  but it does not affect the value of my result of the query to SELECT entry.

  Is it possible to assign a value to the query result SELECTION control?

  I tried to use JavaScript that works if I pass a number, but it does not work if I pass a query result,

  Your help is very appreciated,

  Kind regards

  Iccsi,

  @Iccsi,

  My bad!  Yes, you will either need to the CFOUTPUT tag (that you commented out in your code) but without specifying a query or change the CFLOOP query CFOUTPUT = "Notes".  If one of these should work:

  "#Rating #

  "#Rating #

  OR

  "#Rating #

  "#Rating #

  -Carl V.

• ADF: Assigning the value of column VO to OutputText.

  Hi all
  
  I have a VO who im showing as ADF read Table only. And one column that VO should be included outside of this table, I mean, I don't want to include this column in the table that I want to assign the value of the column to Text output component (Active).
  I want to assign the value of the column to the output text component.
  How can I achieve this.
  I think im clear with my requirement.
  
  Any answer will be really grateful.

  Please read this before posting
  https://forums.Oracle.com/forums/Ann.jspa?annID=56

  am now back to the topic.

  tell as an example.
  Here, I had to employee vo drag and drop as readonly af:table employee.
  in this readonly af:table no need to show their id of employee, but you don't want to show this id used as some text output at the top / bottom of the table.
  I think reason?. as it comes to your condition.

  If am so right, moving later.
  Drag and drop the af: table without employee id. and then drag and drop the employee as af text id: output
  important: employee select id in the user interface that came out text go to partial property inspector trigger are at table.

  You may wonder why I like this mean?
  If you like this then means that move through the records of documents / select in af:table means revalent employee id get you. This way you get the desired results. :)

  Thanks & cordially
  ADF7.

• How to assign the value to the particular text box field

  Hi all
  
  My requirement is to call the Web service with the participation of the ADF page.
  
  The steps I did:
  
  1. I created a data control to the WSDL-based Web service.
  
  2. simply drag and drop the process, it is automatically created the form with the fields of entry, press the Process button
  
  3. when I entered the values and then process button, it'il pass web service values corretly.the is called with the values entered correctly.
  
  4 but when I try to assign the value of some other material that does not work.
  
  I am assigning value to the value field navigate to the properties of the particular field = "CRΘER."
  
  When I like what the value is displayed on the screen. But it will not pass the value to the web service.
  
  I think that the value is only the display on the screen. Stored not at the level of links. Kindly guide me in this.
  
  Thanks in advance
  C.Karukkuvel

  Hello

  Just the previous value placed on the next to put that into the first field level JSpx
  

  If not put a valueChangeListener and EL Expression to set the value

  Kind regards
  Suganth.G

• Assign the value to the Application Variable via javascript

  Hello
  
  How can I assign value to an element of the application (not the page element) through javascript.
  
  I tried to assign the value as follows:
  
  $s ('F150_REGION_TEMP', region);
  
  where F150_REGION_TEMP is the application variable and 'region' is populated value in javascript.
  
  Kind regards
  Benz

  Hello

  Try

  BR, Jari

  Published by: jarola on March 1st, 2010 14:47

• Assign the value to the interactive report search string

  Hi guys,.
  
  I have an interactive report that has the text box 'Research report' usual. I have a text separate element called: P1_VPN on the report which is filled in when the user connects.
  
  What I would do is to have the text box 'Research report' must be assigned to the: P1_VPN as a default and the dataset returned to rely on this value.
  
  I'm looking for a way to pass the value in the text of the report item and clicking the "Go" button that is dynamically when the page is loaded, if it is possible?
  
  Thank you

  Hello

  Reading of: http://www.evernote.com/pub/sstryker58/Stews_Apex_tips#n=b5abf5b7-3ff8-48c2-8e60-a5038c14e0d5

  This explains how to switch a filter by using the URL - when loading the page of IR, the filter will be applied, but the user can then remove it if they wish to

  Andy

• Is it possible to assign the DHCP pool to a specific SSID?

  Hi experts,

  I wanted to know if it is possible to assign a DHCP pool to a specific SSID on the Cisco Aironet 1142. If so, what commands do I need to implement?

  Thanks in advance.

  concerning

  Fari

  We can directly assign the DHCP for the SSID pool, we can map the SSID to a VLAN and this subnet VLANS can be configured for the DHCP pool...

  If this client that connects to the SSID will hit him VLAN and then this VLAN the DHCP is reset...

  On the access point, you can configure the DHCP pool or even on the switch or L3 device or server...

  Regrads

  Surendra

• ORA-06550 assign the value to the parameter

  Hi trying to assign the date quarter to a variable and get this error message, how can I assign a value to this parameter to PL/SQL:

  declare

  Neighborhood varchar (2);

  Start

  Select to_char (sysdate, 'YYYY-Q') in double shifts;

  dbms_output.put_line (Quarter);

  end;

  [Error] Execution (05:42): ORA-06550: line 2, column 42:

  PLS-00201: identifier 'vQUARTER' must be declared.

  ORA-06550: line 2, column 50:

  PL/SQL: ORA-00904: invalid identifier

  ORA-06550: line 2, column 3:

  PL/SQL: SQL statement ignored

  ORA-06550: line 3, column 26:

  PLS-00201: identifier 'vQUARTER' must be declared.

  ORA-06550: line 3, column 5:

  PL/SQL: Statement ignored

  your error message refers to vQUARTER, which is not listed in your code example.

  In addition, quarter is 2 characters such as defined in your code, but you ask to 6 characters in there, for example, 2016-1

• How to assign the value "ID or content dDocName" (property of the University Complutense of MADRID) Webcenter capture.

  Hello

  Could you please help me for the script for extracting Webcenter UCMS property in Webcenter Capture. I also have a requirement where I need to assign a value to the UCM property ' dDocName or content ID "of the capture of webcenter.

  Someone please help me with above scenarios.

  Hello

  Thanks for the reply. My requirement is, when check-in file to the AAU, it generates values to the property "docId" for the file that is unique. I need the value of the docId during validation webcenter capture processor. I solved this problem.

  I created a filter in the AAU for archiving profile. This filter is triggered whenever the Service factor of the AAU invoke. In this filter, I can get the value of "docID".

  Thank you.

• How to assign the value to the application-level element

  Hello

  I'm learning to APEX.  I use version 4.2.6.

  My question is, I set a text field called 'FINANCIAL_YEAR' in the login page.  I wanted to know how to assign this value to a text element of Application level (on page sent), so that I can get this value through at my request.

  Thank you

  -Anand

  anand_gp wrote:

  Yes, I created a 'text area' under 'HTML' in the 'Home' page  Who accepts the exercise of a table through LOV.  I intend to assign this value to a global variable so that this variable can be read in any of the application to filter the result set from different tables (not yet built the rest of the application).  To do this, I was intending to use "Shared components"-> "Elements of Application".  I'm still not quite sure how it works.

  Start by reading the documentation on elements of application.

  Go to the shared components > Application parts and create your G_FINANCIAL_YEAR item. Value Session State Protection Restricted - can not be set the browser so that the value is not editable by the user, falsification of URLS or scripts.

  On the home page, if there is not already a button to submit the value of the fiscal year, add one in the HTML area, with the Action as a submit Pageclick. Otherwise, you can do without the button and using submit Page in Page Action when the changed value select the parameter in the list so he can undergo.

  Then, in the section of the Page processing, create a calculation:

  Point Type: Application-level element

  Calculate Item: Application: G_FINANCIAL_YEAR

  Point calculation: After submit

  Type of calculation: Value of the element

  Calculation:

  Run the application, select a value in the list of the fiscal year and submit the page. Review of current session state in the viewer of session state by clicking on the link of Session in the toolbar developer. Select the Elements of Application in the view list, and then click set. The element of your application and its current value must be visible. You can now reference value throughout your application by using the appropriate syntax.

  You should also consider if a default value (for example the current year) using a calculation Application from the point of calculation on the new Instance and coordinate the application point and part of the homepage using point application as the Source of value or an expression with Source page element, the value always, replacement of value that exists in the session state.

• Is it possible CreateInsert with the value of the attribute of a backingBean method?

  Hello, I am using JDeveloper 11.1.2.3.0
  I want to create a new record in the database with an attribute in a backingBean method. I have therefore a method that returns a string and I want to use this value for one of the attributes when I fill out the form in the ADF. But I have a problem because the operation CreateInsert cleans all the fields of the form. Is it possible to only fill the other fields of the form and as a field to be filled in automatically with the value returned by the method? If this isn't the case, please give me an idea on how to achieve this.
  Thank you

  Ok

  For example, if you have a button to your form to create a new line.
  The button should be as below:

  And the code in your backing bean:

  public String onCreateRowClick() {
    OperationBinding op = getBindings().getOperationBinding("CreateInsert");
    Object result = op.execute();
    DCIteratorBinding yourIt= getBindings().findIteratorBinding("yourViewIterator");
    Row newRow = yourIt.getCurrentRow();
    newRow.setAttribute("aa", getAttributeValue());
    return null;
  }
  
  public DCBindingContainer getBindings() {
      DCBindingContainer bindings = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
      return bindings;
  }
  

  and of course, you should have the "CreateInsert" action in your page links.

  Do you need anything else?
  I'm not good enough with tutorials :).

• How to assign the value based on the various buttons

  Hello
  I'm working on create/update page to date, who have two buttons, save and send. The two buttons save registration but two fields in OT be assigned values when you press "submit" button. If I set EOImpl (< nom_de_colonne >), how I'd get that affects? Or any other convenient way to implement?
  All information and any suggestions will be appreciated in advance.
  Thank you.
  Rudolph

  Hi, had
  Thanks for the quick response. I do not work on the courses page. It's all simple page to update. My drawing a 2 button, save and send. Both registers the update. Then click on the "Submit" button, I neet automaticall value for 2 columns, present the flag = O, application number = 'SSR - 1' before you save it, and the value must be stored in the DB table.
  Thank you.
  Rudolph

• Assign the value of a table to a text field

  Hello

  I need assign value from a table to a text field, but the coordinates in the table are obtained from the concatenation of two values (determined according to the choice of two groups of radiobutton)

  How can I do?

  I get the correct text assigned to the "ADDRESS" text box directly and this work:

  DATATABLE_TEXT. RawValue = TABLE_1.A_2.B_3.rawValue;

  But, if I call the sentence by concatenating the values A_2 coordenate + '. ' + B_3, with the result of

  the selecction of radiobutton and does not work.

  I tried with this code:

  Formulari1.PAGE_1.OPTIONS_A::click - (JavaScript, client)

  COORDINATES.rawValue = "A_" + OPTIONS_A.rawValue + ".." B_"+ OPTIONS_B.rawValue;

  Formulari1.PAGE_1.OPTIONS_B::click - (JavaScript, client)

  COORDINATES.rawValue = "A_" + OPTIONS_A.rawValue + ".." B_"+ OPTIONS_B.rawValue;

  Formulari1.PAGE_1.button::click - (JavaScript, client)

  / / - This sentence works ok.

  DATATABLE_TEXT.rawValue = TABLE_1.A_2.B_2.rawValue;

  / / - this sentence does not work -

  COORDINATES.rawValue = "A_2.B_2";

  DATATABLE_TEXT. RawValue = TABLE_1. (COORDINATES. The value) .rawValue;

  -This sentence doesn't work-

  COORDINATES.rawValue = "A_2.B_2";

  DATATABLE_TEXT. RawValue = TABLE_1. (COORDINATES.rawValue) .rawValue;

  -----------------------------------------------------------------------

  the objects are:

  names grups and boxes option of option buttons:

  OPTIONS_A

  A_1

  A_2

  A_3

  OPTIONS_B

  B_1

  B_2

  B_3

  names of tables and rows/columns:

  TABLE_1

  HEADER_ROW

  A_1

  HEADER_COL

  B_1

  B_2

  B_3

  A_2

  HEADER_COL

  B_1

  B_2

  B_3

  A_3

  HEADER_COL

  B_1

  B_2

  B_3

  text fields named:

  CONTACT INFORMATION

  DATATABLE_TEXT

  button named gall:

  button

  ------------------------------------------------

  a captured image:

  

  You must use the function "resolveNode" to reference objects correctly.

  In the script executed by the button, place the following text:

  selectedRow var = TABLE_1.resolveNode("Page1.OPTIONS_A").rawValue;

  var selectedColumn = TABLE_1.resolveNode("Page1.OPTIONS_B").rawValue;

  txtTableValue.rawValue = TABLE_1.resolveNode(selectedRow_+_"."_+_selectedColumn).rawValue;

  The only other thing you need to do to set the value of your binding radio button A_1, A_2, etc. for each of the option buttons.

• How to assign the value to a dynamically created flash variable.

  I want to change the value of a variable that is in another flash movie. I loaded the swf file. Inside the function "onLoadInit", I wrote code like below.

  loadListener.onLoadInit = function(target_mc:MovieClip):Void
  {

  This [target_mc + "."] contents.obj.' + mcSelfObj. m_TemparVariables [w] .varname] = 'Left ';

  where mcSelfObj. m_TemparVariables [w] .varname contains 'position', which is the variable I want to change. This declaration is not assign a value to the variable.

  If I hardcode the above statement as below it works

  target_mc.contents.obj.position = 'Left ';

  }

  In the previous version of flash, we used eval() to make over assignments.

  While you don't seem to use AS3, try...

  [mcSelfObj.m_TemparVariables [w] .varname] target_mc.contents.obj = "Left";

  based on what you say works, which is the best I can do to determine where the media should be.

  If these are all a form of variable identity rather than the names of instnance, then you will need to use parentheses for each instance and do not use points