Is it possible to automatically update the tools of Toshiba?

Similar Questions

• Is there a way to connect Windows calendar to a blackberry to automatically update the information?

  Using the calendar with blackberry

  Is there a way to connect Windows calendar to a blackberry to automatically update the information

  See if this helps: http://forums.crackberry.com/blackberry-curve-83xx-f52/sync-windows-calendar-vista-86310/

  According to the forums at http://www.blackberryforums.com/, it is not possible to directly synchronize a Blackberry and Windows Calendar.

• update date and time for 3.6 numbers does not show the time and does not automatically update the date

  The 'update date and time"for numbers of 3.6 does not show the time and does not automatically update the date.  What should I do?  Thank you.

  Hi david,

  where do you find ' update of the date and time.

  Quinn

• When I send an e-mail, the system automatically updates the message in my PROJECT folder. This happened last week. How to stop this annoying problem?

  When I send an e-mail, the system automatically updates the message in my PROJECT folder.  This happened last week.  How to stop this annoying problem?

  I use hotmail.  (but is seriously considering moving to something else)

  You need to ask the experts of Hotmail in their forum. I've never used the program.

  Windows Live Solution Center Hotmail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=1

• Automatically update the paths?

  Is there a way to set up a Dreamweaver site so when I move an asset (from one folder to another, for example) Dreamweaver automatically updates the associated filepaths?

  Go to Site > Manage Sites.

  Click the Advanced tab.

  Under Info Local, make sure that the Cache: activation of the Cache is checked.

  Dreamweaver should automatically update your file paths whenever you move or change a file.

• I have my windows automatic update. the other day, my windows updated and Ive had problems of e-mail and online video problems. I have vista Home premium OS. any suggestions?

  can receive email, but not able to send after the recent ('important') updates of windows have been installed.
  also can't see videos on facebook because of the mistakes because of these updates.
  I have the my windows update set to automatic and noticed these problems after an update has taken place. I did a system restore and everything worked fine. Needless to say the next day, the same thing. I even went to the windows update to manual setting, and it is always updated by itself. This made 4 consecutive days. now when I go to system restore, I don't even get the opportunity to go beyond 5 days! video errors on facebook tell me that "the video is unavailable" and "video has been deleted or is not visible because of the privacy settings. I also noticed that most installed updates are updates to windows security. and my windows update seems to be popping up constantly telling me ago over updates to install.

  Hi Unhappy72,

  I'm sorry that you are still facing the same problem. I'll be more than happy to help you.

  I have a few questions:

  (a) what version of IE are you using?

  (b) has been going through the steps to reset Internet explorer?

  (c) you have any version of Flash Player on your system?

  You can try to update the version of Flash Player for videos.

  To do this all first you need to uninstall and then go ahead and download the latest version and install it.

  To uninstall the application follow the steps given below:

  1. open programs and features by clicking on the Start button, click Control Panel, clicking programs, and then clicking programs and features.

  2. Select a program, and then click Uninstall. Some programs include the ability to modify or repair the program in addition to uninstall, but many simply offer the option uninstall. To change a program, click change or repair. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, please visit the below given link:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can also check if the connection parameters are set by default.

  Make follow them the steps below:

  1. open Internet Explorer.

  2. press the Alt key on your keyboard for the file menu if it is not already there.

  3. go to tools, click on Internet Options.

  4. click on the Connections tab.

  5. at the bottom of the page, it will be a local network settings tab, click on this.

  6. check if automatic detect settings is enabled in the box, if it isn't what to choose.

  7. close all Internet Explorer Windows and reopen and check if the problem persists.

  This should solve your problem of not being able to send emails.

  You can also try to clean boot your system and then try to play the videos. This will let us know if the background services interferes with the proper functioning of your system.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  Once you have disabled all services that you can check if you are able to play the videos. If so, you can try the divide and conquer method to find what service exactly the origin of the problem. For those who follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Alternatively, you can try to disable the modules such that some add-ons can be a problem while browsing through the internet.

  To disable the modules follow the below given steps:

  1. click on the Start button, click principally made programs, on Accessories, click System Toolsand then click Internet Explorer (No Add-ons).

  For more information on the modules, please visit the below given link:

  Internet Explorer Add-ons: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Internet-Explorer-Add-ons-frequently-asked-questions

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After that put 4.1.2 to level, starting XP hangs on the task of updating the tools

  I upgraded to Fusion 4.1.2 on Max OS 10.7.3.

  After the upgrade, XP still hangs partially through start, after that I connect to my user.

  I can evetually bring up the Task Manager with CTRL-ALT-DEL task manager tells me that what looks like tools vmware update process consumes 99% of my CPU.  Once I have kill this task, XP end its commissioning and works OK.

  How can I fix?

  Thank you.

  Manually uninstall the tools inside the virtual machine (from Control Panel), and then install them manually after a reboot.  Cancel any automatic installation which begins.

• I have the addition of winows 7 Home premium that I noticed on my automatic updates the there is 20 for the microsoft office program security updates is not updated once continues to not update error code 646

  error code 646 will not refresh automatically updates for microsoft office security

  Hello

  Visit this link:
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3a6e0839-35e9-474B-843d-5580adc6a92e

  All the best!

• Creating new Document - change 72 dpi to 300 DPI is no longer automatically updates the width/height in pixels?

  Hello world

  I often work between Illustrator and Photoshop, copy lineart in PS and since I recently updated two programs, somehow I changed a setting or something has changed in the software itself.

  The steps that I "used" to take...

  1 Select lineart illustrator and copy
  2 create a new record in PS - change the resolution from 72 to 300

  3. close the new document (because the width and height would be in 72 dpi)

  4. create the document again - this time she would have saved my setting of 300 DPI and automatically adjust the pixels accordingly

  Unfortunately step 4 doesn't seem to work for me. He just stay at 72 dpi.

  Is there a setting that has changed, or is there another way to "easily" copy lineart in a new PS document at 300 DPI and the right size?

  Thank you for your time

  Zoe

  I just wanted to report that I found a solution in case anyone else think the wrong way as if I was.

  If you change the dropdown to "pixels" in inches or centimeters, for example, and then change the resolution to 300, it will resize the jury to "Printable" size at 300 dpi.

• Automatically update the column in the table in OBIEE

  Hi people,
  
  I have a requirement to say I need to update a column of table based on a condition, but this update should happen on a daily basis (I mean that it would be held once per day) by checking if all the records in this column meets the condition then update
  
  example:-column = 'pending', then using the "approved". As records of transactions every day in the table lights. OBIEE should check and update the line so the next time it does not show this line as "pending".
  
  I thought of 2 approaches to this
  (1) through the write-back, it is possible to update but manually (the question is it can't be automated or on demand on daily basis and update multiple records on a go)
  (2) write a stored procedure or a function of update, but how can I perform this procedure either regular or run once daily.how to use it?
  
  Any thoughts on the above two points or any method you can think off the coast.
  
  Any help is appreciated!
  
  See you soon,.
  KK

  Murielle,

  This shud be easy...
  -Create a direct database... with the Update statement
  for example: Update table set col = "Approved" where col = 'pending '.
  -Create an ibot using the RFI above and plan on a daily basis.

  This will update the complete table with the new value on a daily basis based on the State

• How to have the list of dates automatically updated the site, without manually changing in Muse

  Hey, I design a site for a group that I play the drums in and I was wondering how I could update the list of concerts, we have, without having to manually edit in Muse then download again. Is there a way to past shows being removed without doing me it manually?

  I believe you are referring to events with calendar on the page where you can update the calendar with the dates, in which case you use the event of third party system then Muse will not control it, but if you created that in Muse itself then you will need to manually edit of Muse.

  If the site is hosted on BC, then you can use the events module to view the dates and details, the end site, you can schedule events and that expired will be removed from the calendar.

  Thank you

  Sanjit

• I bought the upgrade that allows me to convert a pdf to a word document and after that the last update the tool option is not only comments, how can I get the tool option back?

  How can I get the tool option to return so that I can convert a PDF file to word

  First thing to try: uninstall and reinstall the latest version of the player.

  If this does not resolve the problem, provide information on your operating system, version Reader, etc.

  BTW did you connect with Adobe Reader [Preferences |] Adobe online services]?

• Satellite A210 - what are the tools of Toshiba?

  Can someone please help me understand some of the utilities / tools available from the Toshiba download site?

  I am trying to install Windows 7 RC1 on an Equium A210. Some of the utilities and drivers, I can understand; for example, things like the acoustic silencers, updated the BIOS, driver Bluetooth Monitor, Bluetooth Stack, controller card, reader DVD reader, display, update Firmware, infrared Driver, LAN Driver, Modem Driver, Sound Driver, Touch Pad Driver & Wireless Lan Driver makes sense.

  I can guess, but I'd like to know EXACTLY what the purpose is of other things such as:
  o help
  o Config Free
  o Desktop SMS
  o Fingerprint Software
  O hardware configuration
  O online product information
  o SD utilities
  driver o SPS
  O supervisor password utility
  o TEMPRO
  o tiles for Mobility Center
  o Value Added Package

  I can't find any sort of description as to what these things do, and why they would be useful for me; can anyone help... Please?

  And what is the Flash Media Driver?

  The exact model and specifications of my laptopl isn't important ine relatively to this question and I realize that none of these things are certified for use with Windows 7, but this really isn't the point; I don't know what they are used to with Windows Vista or XP or.

  Respect of your question, but for the EXACT description, someone here must have a lot of time and try to explain it all. The functionality of certain tools is quite complex and you can play around with these tools to see what they offer and what you can do with it.

  My brief description of the tools here, I know:

  * Toshiba Assist *.
  Is a small tool where you can find shortcuts to the key tools and utilities.
  With these tools, you can optimize and customize the operating system preinstalled

  * ConfigFree *.
  Is a tool that helps you identify problems with LAN/WLAN connectivity. To find out what it is and how it works read help option.
  There you can find guide of how to use it.

  * Desktop SMS *.
  Should help you send SMS via Outlook or Windows mail - http://www.comunified.com/

  * Fingerprint software *.
  If the laptop comes with fingerprint sensor, this tool is for the registration of fingerprints.

  * Hardware Toshiba of installation *.
  Just open it and check all the available settings.
  Sorry, but it is not necessary to write some explanations.

  * Online product information *.
  Simply open and you will understand what it is.

  * SD utilities *.
  Format SD memory card installed, and you can format the cards you use in multi-card
  (the location where you put the cards compatible and readable)

  * Driver SPS *.
  SPS driver required for DVD playback software, if you want to upgrade your operating system.
  Otherwise the won´t of DVD playback works.

  * Supervisor password utility *.
  If you want to create a supervisor password (locks complete BIOS or allows other users to change certain features in the BIOS).
  Not required for the features, just a security feature/add-on.

  * Tempro *.
  http://EU.computers.Toshiba-Europe.com/innovation/generic/TEMPO_RELEASE_V1/

  * Tiles for Mobility Center *.
  is a Toshiba from the Toshiba Assist plugin and the other will lock the computer (like pressing Fn + F1).
  You will find in the Windows Mobility Center

  * Value added package *.
  To make things more easy Toshiba packed 7 different tools in one package. In the past, each tool has been installed separately.
  Now, using a setup.exe that each of them will be installed. VAP contains:
  -Toshiba components pilot common
  -Toshiba Utilities
  -Toshiba PC Diagnostic tool
  -Toshiba Power Saver
  -Toshiba Button support
  -Toshiba zooming utility
  -Toshiba Flash cards

  Flash media driver should help settle the multi-card reader.

  One last thing:
  Normally Don t you need to update a driver. most of the components are installed immediately after a clean install of Win7. Just update those remaining. If you are not experienced in the use of certain applications or installation of drivers, it would be the best way to allow Win7 install your machine.

  Bye and good luck!

• Automatically update the sequence files (any)

  We have a very large number of sequence files that must be updated.  The "Types" have changed.

  Is it possible that TestStand (f1 2010) updated all the files in a directory, or if all goes well recursively?

  What I am used to doing is to check all the files off our Version control, select about 20 files simultaneously and open them in TestStand, save all, and then close them, then make another game...

  Is there a faster way?  (I expect to archive them out of Version control.)

  Mike

  Take a look at the converter file sequence located in tools > sequence of update files

• How do you create a calculation that automatically updates the changes?

  Hi all

  I am trying to create a named using subtraction calculation. That's how it is stated:

  KM

  -KG

  Field1 =

  -Field2

  = GM (liquid)

  The tab calculate for zone 1, I wrote in the simplified field notation:

  KM - KG

  And the tab calculate = GM (liquid), I wrote it in simplified field notation:

  Field1 Field2

  And it all works perfectly that I change all the totals in the fields of Field2 or KG or KM .

  If changes in these areas they don't update automatically.

  How can I make them to update automatically?

  Any help would be much appreciated.

  Thank you very much.

  Bridie

  To set the order of computation of field, go first in forms editing mode (Tools > forms > change), then: tasks > other tasks > edit fields > set field calculation order

  Order the fields in a list of everything that makes sense for your form. Be sure to do it again once the form works as you want to ensure that it is always configured correctly.