Is it possible to combine the profiles of two different computers?

Similar Questions

• Is it possible to have the audio from two different sources and routed to separate outputs at the same time?

  I currently have a string of the guitar signal electric-Rocksmith Real Tone cable - ASIO 4 all help IK Multimedia Amplitube 3.   I would like to know if I could also watch DVD with her while the implementation of the programme of Amplitube with sound.  It would be great that I use the DVD for guitar and play at the same time.   I don't have the signal of two merged as one.  In my mind, I should be able to disable the ASIO devices and use them with DirectX as usual.  I could send the ampitube signal to the headphones and use external speakers for the guitar signal, and use the lessons of speakers for the DVD (or maybe YouTube) laptop on board.

  Is this possible?

  How can I do?

  Toshiba Satellite X 205-S7483

  Jeff

  Yes.  For example, I have my Skype phone calls go to my helmet (normal just plugged in the headset) while my media player plays my speakers.  You can choose your default communication or multimedia devices with a right click on the volume control icon and choosing "playback devices".

  Other programs can also be built to be "to the output current" and allow you to choose the output too.

• Can I synchronize the counters on two different computers in the C API?

  I installed the M-series cards (6254) in several computers. I would like to synchronize the counters for each card.  The best way that I came with to do this was to have the counter on each counter entries read a common external clock signal running at 10 KHz I have would then feed a second signal to each card and trigger the task that runs each counter starts when the second line goes high.

  Following the examples provided with the C API, it was easy to get each card KHz signal and then to match the beginning of the counter that I tried to read

  DAQmxCfgDigEdgeStartTrig (taskHandle, inputLineStr, DAQmx_Val_Rising);

  However, this did not work and gave me the following error:

  DAQmx error: the specified property is not supported by the device or is not applicable to the task.
  
  Property: DAQmx_StartTrig_Type
  
  Task name: task
  State code:-200452
  
  End of the program, press the Enter key to exit
  
  

  I know it's very simple sync the cards within a computer using the RTSI interface, but it is not possible that my cards have to reside in different computers.

  It is even possible to synchronize the counters on computers, and if yes how can I do it with the C API?

  ------------------

  Here's what I've written so far:

  
  
  
  
  #define DAQmxErrChk (functionCall) if (DAQmxFailed (error = (functionCall))) goto error; on the other
  int main (void)
  
  {
  
          int         error = 0;
  
          TaskHandle  taskHandle = 0;
  
          uInt32      data = 0;
  
          tank        errBuff [2048] = {'\0'};
  DAQmxErrChk (DAQmxCreateTask ("task", & taskHandle));
  
          DAQmxErrChk (DAQmxCreateCICountEdgesChan(taskHandle,"/Dev1/ctr0","",DAQmx_Val_Rising,0,DAQmx_Val_CountUp));
  
          DAQmxErrChk (DAQmxConnectTerms ("/ 10MhzRefClock/Dev1", "/ PFI8/Dev1", DAQmx_Val_DoNotInvertPolarity));
  
          DAQmxErrChk (DAQmxCfgDigEdgeStartTrig(taskHandle,"/Dev1/PFI14",DAQmx_Val_Rising));
  DAQmxErrChk (DAQmxStartTask (taskHandle));
  printf ("without interruption of the poll. Press Ctrl + C to interrupt\n");
  
          While {} (1)
  
                  DAQmxErrChk (DAQmxReadCounterScalarU32(taskHandle,10.0,&data,));
  
                  printf ("\rCount: %u", data);
  
                  fflush (stdout);
  
         	}
  
  Error:
  
          puts("");
  
          If (DAQmxFailed (error))
  
                  DAQmxGetExtendedErrorInfo (errBuff, 2048);
  
          If (taskHandle! = 0) {}
  
                  /*********************************************/
  
                  Stop DAQmx code
  
                  /*********************************************/
  
                  DAQmxStopTask (taskHandle);
  
                  DAQmxClearTask (taskHandle);
  
          }
  
          If (DAQmxFailed (error))
  
                  printf ("error DAQmx: %s\n",errBuff); ")
  
          printf ("end of the program, press the Enter key to quit\n");
  
          GetChar ();
  
          return 0;
  
  }
  
  

  Hi neurostu,

  Arms start triggers are disabled by default, so they do not have a default PFI line.

  You will need to set some properties DAQmx to configure a trigger for start of arms. Try adding between DAQmxCreateCICountEdgesChan() and DAQmxStartTask():

  DAQmxSetArmStartTrigType (taskHandle, DAQmx_Val_DigEdge);

  DAQmxSetDigEdgeArmStartTrigSrc (taskHandle, "/ Dev1/PFI14" ');

  DAQmxSetDigEdgeArmStartTrigEdge (taskHandle, DAQmx_Val_Rising);

  You have the file "help NOR-DAQmx C reference"? It should contain descriptions of the trigger > more > arm Start properties.

  Brad

• Can I use the cloud on two different computers States?

  I know that with a subscription, I can download on two computers, but I work from home in Georgia, while my office is in Pennsylvania.   I cause any red flags if I have a download is on my computer at home in Georgia and other my download is on my computer work in Pennsylvania?

  Lol just to use your Adobe ID for both and you'll be fine.

• Log in failure: the user profile Service failed to connect. It is not possible to read the profile of the user.

  Hello
  Trying to create a standard account on a new Windows 7 computer but can not connect. The message with my Swedish translation is: user profile Service failed to connect. It is not possible to read the profile of the user.
  Can someone advice me?

  Hi Lagun,
   
  Step 1:
   
  I suggest you to follow this link below and check if this solves the problem.
   
  Now search for the question.
   
  Follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
   
  See also:
   
  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215
   
  Important: the above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
   
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/
   
  Step 2:
   
  If you need assistance in Swedish, below the URL provided will help you receive support appropriate for your location information. Open the link and select your region from the drop-down list, and then click the arrow to continue.
   
  http://support.microsoft.com/common/international.aspx.
  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Combine the free capacity of different disk group

  Hello

  I have Dell PowerVault MD 3000i. I have the free capacity of two different disk groups. Two groups of disks have the same RAID level. Is it possible to combine the free capacity of these two groups?

  Thank you.

  No, this isn't an option. Your only choice is to make 2 different virtual disks.

  In the operating system, you can be then able to combine them, but this has usually few drawbacks with respect to performance and reliability.

• Is it possible to use two different computers with the same adobe - ID and the same adobe license?

  Is it possible to use two different computers with the same adobe - ID and the same adobe license?

  Hi Morten,

  Yes, you can have your subscription or your license installed on two different computers with the same adobe id, however use one at a time.

  Please let us know if you have any questions, more about it.

• Hi, I want to know if it is possible to install the version pro on several computers, or just one and if we want to add later that cost more?

  Hi, I want to know if it is possible to install the version pro on several computers, or just one and if we want to add later that cost more?

  A single user license allows installation enabled on both machines.  These two machines you can only use the software on one machine at a time.  You will need the licenses as the number of machines that you want to use the software on at the same time.

• I already have 5 Lightroom and installed on my PC. Yesterday, I bought a Macbook Pro and I would like to install my Lightroom 5 in my new Macbook Pro. Is it possible to install on two different computers? If so, how is it possible to install by Inter

  I already have 5 Lightroom and installed on my PC. Yesterday, I bought a Macbook Pro and I would like to install my Lightroom 5 in my new Macbook Pro. Is it possible to install on two different computers? If Yes, how is it possible to install via the Internet, like my Macbook Pro doesn't have CD Driver. Thank you very much for your support. Hope.

  Hello

  You can install and activate the perpetual software (purchased) two computers, as long as you don't use it on one at a time.

  To load the software on another computer, download and install it as you did on the first computer. Then enter your serial number to activate it.

  Please find the link below to download:-Download Photoshop Lightroom

• view the code for two different pages at a time

  HI - in other editors I've used I've always been able to implement the code for two different pages so that I can watch side by side to compare. I can't find a way to do this in Dreamweaver. Anyone know if this is possible?
  Thank you

  Found. Always after asking for help! This is the "cascade" in the Windows menu.
  Thanks anyway!

• You can use the x 86 version and the x 64 version on two different computers

  I have a key/installation of Windows 7, which can be used for installing the x 86 version or the x 64 version. Could I use the x 86 version and the x 64 version on two different computers?

  Hi hgcxngv,

  No - not at the same time.  A key is an installation by the license agreement (regardless of the size of bits).   Is excluding the special manufacturer or license multiple keys which normally applies to companies and I am sure that you would know if you had a since they would cost much more to buy and were more difficult to obtain (if you remember).

  You can install by using 32 bit on a computer and then uninstall it from this computer and install the 64-bit on the other or vice versa (although you'll probably need to use the help of phone to activate the second time since the automated process will most likely perceive it as an attempt to both facilities and reject and you will need manual for past this problem).

  The foregoing does not apply to OEM licenses that cannot be installed on computers with they came, live and die with this computer (even if the key would have worked on each version, perhaps in order to simplify things for the manufacturer).

  I hope this helps.

  Good luck!

  Kosh

• What happens if I am connected to the internet through two different sources or more?

  What happens if I am connected to the internet through two different sources or more?

  You get Internet from two sources. What did you expect to happen?

  This is not double the speed of anything...

• have two different computers and have problems recoving from hybernation. Locking the system

  Original title: recovery of hybernation

  I have two different computers MS 7 and have all two issues recoving from hybernation. They lock just straight up (do not accept an entry mouse or keyboard) and requir3e hard re boot. Goes 8 to 10 times a week.

  Hello

  (1) did you of recent changes to the computer before the show?

  (2) is the specific question at the opening of specific applications or programs?

  (3) you get an error message?

  You can perform the following methods and check if it helps.

  Method 1: Windows 7 hangs or freezes

  http://support.Microsoft.com/kb/2681286

  2 the resolution of the problems of method Performance

  Run the troubleshooter of performance, then check if it helps.

  Check out the link: http://windows.microsoft.com/en-US/windows7/Open-the-Performance-troubleshooter

  Method3:How to troubleshoot performance problems with sleep, hibernation and resume:

  http://support.Microsoft.com/kb/950686

  Note: The article remains valid for Windows 7 also if it is for Vista.

  For more information, connect to:

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  Method 4: update video drivers card

  Check if the video card drivers are up to date. Install the latest video card drivers for Windows 7 on the manufacturer's Web site.

  Tips for solving common driver problems:

   http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  It will be useful.

• I was unable to download the free trial version Acrobat Pro DC.  Tried on two different computers - Mac.  Message says cannot download.  What do you do to get the program to download?

  I was unable to download the free trial version Acrobat Pro DC.  Tried on two different computers - Mac.  Message says cannot download.  What do you do to get the program to download?

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

• I want to know if I can use creative cloud with the same account on different computers

  I want to know if I can use creative cloud with the same account on different computers, because my children want to she and I have known if I buy when I can use it on several computers at the same time

  If it is the individual subscription, you can activate on 2 computers only.

  However, there is no limit for installation, but you can connect and activate on 2 computers only.

  If you had already signed and activated CC apps on 2 computers, and there still if you want to activate on a 3' rd computer, you can simply disconnect one of the 2 comps, so that you can keep counties of activation.

  For more information, see the link below:

  https://www.Adobe.com/content/dotcom/IE/products/creativecloud/FAQ.html