Is it possible to convert the recovery CD into Windows installation CD?

Similar Questions

• Is it possible to remove the recovery on the HARD drive partition?

  I had a virus on my laptop, so I gave a "specialist".

  When I got it back it turned out, it didn't work properly - another specialist said that the recovery disc has been eliminated - is it possible? or is it just hidden?

  And if I have no more HARD drive recovery, what do I know?
  Where can I buy ad recovery to recover my system?

  Please, help me, cause I'm an ignoramus total that computers are concerned...:)

  Powerless Kate:)

  Hi, pewna.studentka.

  Yes, it ' s possible to delete the recovery hard drive and very easy to do in partitioning, formatting and etc. Once I had an experience to remove it, but in my hp laptop. I recommend you do the following:

  1. contact the Toshiba service authorized in your country or order https://backupmedia.toshiba.eu/landing.aspx
  2. find (buy) a copy of Windows, install and drivers downloaded from the Toshiba driver page.

• Is it possible to convert the T61 system so that it can use an infrared remote control?

  Is it possible to convert the T61 system so that it can use an infrared remote control?

  Canon and many other manufacturers of consumer electronics, provides instructions on the operation of the optional accessories in the manual of instructions for the accessory.  Manual user for the primary device will usually include a page that lists compatible accessories that are available for the device.

• Is it possible to convert the standard numbered list to the list that appears on the same line a right after another? As indicated in 1. Text goes here, 2. Text goes here, 3. Insert text here

  Is it possible to convert the standard numbered list to the list that appears on the same line a right after another?

  Instead

  1. Insert text here
  2. Insert text here
  3. Insert text here

  This

  1 text goes here, 2. Text goes here, 3. The text here.

  This revised list can take multiple lines.

  I use InDesign CC2014 - if that makes a difference.

  the only way is to convert numbered in the text (select numbered list > ctrl (or right click) > bulleted & numbered lists > convert numbered text).

  Then, with search - replace, you can change the paragraph returns in space (or in space by commas as in your example)

• Is it possible to convert the selected text in javascript lines?

  Hi all

  I put a word to indesign cs 5.5 file is almost in a single table, I need to separate the text of the actual tables, is it possible to convert the selected text in javascript lines?

  If there is no way to do that, someone can help me to make a script to cut selected lines and place it in the right holders of the table pointer to make independent table and then convert to text?

  Hey brother,

  Simply select the rows or cells represent the lines and then run this Javascript code snippet:

  for (var r = 0; r < app.selection.length; r++) {
      for (var t = 0; t < app.selection[r].rows.length; t++) {
          for (var u = 0; u < app.selection[r].rows[t].cells.length; u++) {
              for (var c = 0; c < app.selection[r].rows[t].cells[u].paragraphs.length; c++) {
                  app.selection[r].rows[t].cells[u].paragraphs[0].move (LocationOptions.AFTER, app.selection[r].rows[t].parent.parent.storyOffset);
                  if (c < app.selection[r].rows[t].cells[u].paragraphs.length - 1)
                      app.selection[r].rows[t].parent.parent.storyOffset.contents += "\r";
              }
              if (u < app.selection[r].rows[t].cells.length - 1) {
                  app.selection[r].rows[t].parent.parent.storyOffset.contents += "\t";
              }
              else {
                  app.selection[r].rows[t].parent.parent.storyOffset.contents += "\r";
              }
          }
      }
  }
  for (var r = 0; r < app.selection.length; r++) {
      for (var t = app.selection[r].rows.length - 1; t >= 0; t--) {
          app.selection[r].rows[t].remove ();
      }
  }
  

• Is it possible to adjust the sound volume of Windows to more than 100%?

  Hello

  I have a very simple question:

  Is it possible to adjust the sound volume of Windows to more than 100%?

  I explain why I need to do this:
  I can watch DVD files or .avi with my computer and VLC, that allows to adjust the volume to 100%. Some DVDs have a very low sound. So if I set VLC to 200% volume and the system volume to 100%, I can watch movies in good sound conditions. Then, my computer speakers are strong enough for me watching a movie.

  However, I have a problem with VSD: I use VOD with Windows media player and that player does not allow me to adjust the sound to more than 100%. So I put the sound of Windows media player at 100%, the sound of Windows to 100%, but the sound is very low.

  Please don't tell me to buy speakers, mine are pretty strong, and I find it uncomfortable to plug the speakers.

  Please don't tell me to use a software that increase the volume of the file I want to watch VOD.

  Is there a way to increase the sound volume of Windows to more than 100%?

  Please don t tell me this, please don t tell me that. You want to hear other people's opinions or what?

  AFAIK all sound level settings in Windows are synchronized and if you change the sound level in the properties of the speaker at the same level will appear in the Windows for the Volume Mobility Center and the maximum level is 100%. No more than that.

  As you already wrote the sound level can be increased in combination with Windows and some players.

  Is there any other way to watch these videos, but using WMP?

• How can I get windows vista? I get a message that PC is not supported by the recovery disks. Windows vista Home premium HP pavilion dv9310us

  How can I get windows vista? I get a message that PC is not supported by the recovery disks.  Windows vista Home premium HP pavilion dv9310us

  Hello

  This recovery software is part of the process of HP.

  Contact HP support

  http://WWW8.HP.com/us/en/support-drivers.html

  Or ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  See you soon.

• Is it possible to find the two sentences into one pdf file? For example, I know the words 'Here' and 'the answer' occur more than once in my document, but only once on the same page. I'm looking for this page.

  Is it possible to find the two sentences into one pdf file? For example, I know the words 'Here' and 'the answer' occur more than once in my document, but only once on the same page. I'm looking for this page.

  I tried to do this by using the search but it will find only them, if they occur as a long chain, that is to say "Here's the answer" rather than how they occur in the document it is to say "Here 's" a bunch of information that leads you to 'the answer'. The search feature so standard did not help.

  Then I tried to do this by using the tool to delete (obviously not the application of writing!) because it allows me to search for multiple words or phrases, however it is not highlight what page both are found. I tried to turn on the preference to enable deletions of comments and even if it meant that I could then go through all the comments, it's still not faster than my document is more than 1,000 pages, which meant there were too many total comments for me to be able to easily identify which page had both.

  Any ideas?

  There is no built-in way to search for two strings and limited to show only the results that appear on the same page.

  It can be done by using a custom script, however.

• Convert the column values into buckets

  Hello
  
  Please help me to convert the column values into buckets.
  I have the values of the columns in the following way.
  
  
  Age of Orderdate * 9 10 12 14 15 18 19 20 21 22 26 27 28 29 33 34 40 45 * and so on
  
  
  
  But the requirement is the column values should be displayed in form
  
  Age by order date * 15 1 2 3 4 5 6 7 8 9 10 11 - 16-20 21-25, 26-30 30 + *.
  
  
  Please someone give me the solution.
  
  Thanks in advance.
  
  Hervé Rama

  Hi Richard,

  Just to double check, you have Setup buckets for 1, 2, 3, 4, 5, 6, 7 and 8 individually (each with a fair value). The problem is that you simply do not have all data fall into buckets above, correct?

  If this is the case, it looks like has been answered your original question. If so, the label would assign 'Proper' points by clicking on the button label correct next to the appropriate response and open a new thread with your new question. The reason why I say this is it will help other people who have a similar bucket question to your solution, without complicating the issue with subsequent questions.

  If you can post a separate thread, I'd be more than happy to help you with your secondary problem.

  Best regards

  -Joe

• Discs of recovery, or vanilla Windows Installer on Q770 and 2nd HARD drive

  The Qosmio Q770 need to reinstall windows,

  At thining use the disks of recovery, or just vanilla win 7 and then add drivers, I need.

  issue with recovery disks it will affect the 2nd hard drive because that's where all my data?

  Thank you

  LoonyT

  In my opinion, you must install Windows using the original recovery disk. It is much easier and you do not install all the drivers, tools and utilities. All this is included in the recovery image. After installation of recovery image simply configure OS and you can remove applications that you don't need.

  I force test but I m pretty sure second disk will not be changed, just the main hard drive so your data must be secured. You can make backup anyway.

• Where can I find the Original of my Windows Installer?

  Where can I find the Original of my Windows Installer?

  
  
  
  
  Where can I find the ORIGINAL of my Windows XP copy?
  Here are a few things on my laptop:
  • Dell Inspiron 8600 BIOS revision A14 (Note: I bought you BIOS Revision A02) I've updated.)
  • Original OS: Windows XP Profesional 1-2CPU

  Please, do not post your product key.  That said to check the owner's manual, as your computer probably includes a "recovery partition", which you access and use to restore XP provided the factory by pressing one of the keys to fuction (F key) keyboard when you first turn on the computer.

  Try the following to get started:

  (1) backup important data files. Be prepared to re - install your applications.

  (2) restart the computer, when the press of the dell logo displays the computer screen and hold down "ctrl" and press "F11".

  J W Stuart: http://www.pagestart.com

• I can't install or uninstall anything. It telling me that my computer is in safe mode (which is not the case) or my windows installer is not installed properly.

  The Windows Installer

  I have windows xp. I can't install or uninstall anything. It telling me that my computer is in safe mode (which is not the case) or my windows installer is not installed properly. I know that my Installer is 'stopped '. I tried all the steps on the Microsoft technical support. As well as other sites in an attempt to solve this problem. I tried to subscribe, unsubscribe, launches the present, which, in respect of the CDM, run something HIKEY... all, you name it. I tried to download the latest installer, that didn't work... What the devil is left to try?

  Hello

  -What you have done to try to solve the problem?
  -Did you change on your computer due to which the question has begun?

  I recommend you follow the steps in this article and see if the problem still occurs.

  How to solve the problems when you install or uninstall programs on a Windows computer.

• Installation problem: (there is not enough free space to store the temporary files of Windows installation)

  I install Windows 7 Ultimate update on Vista Ultimate. Compatibility check says I can go for it.

  I have 348 GB of free space and 2.4 GB of Ram. I run Disk Cleanup and is are free programs on hard drive. When I run the installer, it gives me this message

  There is not enough free space to store the temporary files of Windows installation.

  I'd appreciate any help to overcome this problem.

  Tried the fix you suggested. He changed nothing

  You may be able to mark the partition on which is installed the operating system as being active.

  1. Open Control Panel by clicking the Start button, and then click Control Panel.
  2. Click system and Maintenance.
  3. Click on Administrative Tools.
  4. Double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  5. In the navigation pane, click the disks as storage management.
  6. Select the volume that contains the existing installation of Windows Vista. In general, it is the C drive.
  7. Right-click on the volume and select Mark Partition as Active.
  8. Click Yes to confirm the action.

  Could also contribute to:

  If you have several hard drives remove all except the one that you install Windows 7, and then replace it after Windows 7 is installed.

  Disable startup programs:
  (A) click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  If you are using XP: click Start, run, and type: MSCONFIG and click OK.
  (B) on the general tab, click Selective startup.
  (C) just below the selective startup, clear the checkbox "Load Startup items".
  (D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
  (E) click OK, and then restart the computer.
  (F) try the upgrade again.

  (NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)

  Also:

  You need more than half of your drive is empty instead upgrade. If your reader is 1.0 TB (1, 000 GB), you need 500 GB + to be free.

  If you cannot free enough space, you need to move data to external storage.

  Free space - increase the hard disk space

  The following procedure cleans the files associated with your user account. You can also use Disk Cleanup to clean all the files on your computer.

  1. click the button start, in the search box, type disk cleanup, then click Disk Cleanup.
  2. in the drives list, click the drive you want to clean, and then click OK.
  3. on the Disk Cleanup tab, select the types of files to delete.
  Note: To delete all Points except the most recent system restore - click on "Clean up System Files" and you will get another tab called more than Options. Now click More Options, and then click 'Clean up' under ' System Restore and shadow copies "and then confirm the deletion.
  4. click OK at the bottom of the window cleaning disc and in the message that appears, click on delete files.

  Reduce the amount of space allocated to system restore.

  1. start--> panel--> system and safety--> system
  2. then click on the "System Protection" link located at the top left.
  3. in "System Properties" window, click on the "System Protection" tab
  4 locate the 'Settings of Protection' box and select / click on the drive letter (usually c :))
  5. now, click the "Configure" button to change the settings to restore "disk space".
  6. move the cursor to reduce the amount of space system Protection can use (min. 2 GB).
  7. click "Apply" and then the "OK" button after setting the disk space.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• "SQL server Setup has encountered the following error: C:/windows/installer/113c2fa.msi.

  113c2fa.msi

  When you install Sage Act! on my system, especially when you try to install any particular part SQL (installation was performed by Sage Act! technical support specialists) we receive the error message "SQL server Setup has encountered the following error: C:/windows/installer/113c2fa.msi. ACT! specialist technical support told us, it is a Microsoft problem that had to be fixed through Microsoft. Any suggestions?

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  SQL Server 2008 - troubleshooting and Support | TechNet

  Hope this information helps.

• Is it possible to recreate the recovery partition?

  I have this satellite plu pro which used to have as usual, a recovery partition on the HARD disk to restore to factory settings. I created a backup disk (in fact, I created it on a USB key) using the Toshiba backup disc authoring program then wiped the drive HARD clean, including the recovery partition. I have come to the point now, but where it would be useful to have that DOS partition and I wonder if it is possible to restore it to how it was originally?

  On the top of my head, I thought that maybe all I would need to do was wipe the HARD drive again, he re-partition, and then create a new partition, call the recovery and then simply copy the content of the key USB/disk backup for this partition. It would even work, or I have to do anything in particular. Assuming that it is even possible with this method?

  Thank you!

  Posted by bollokan
  

  On the top of my head, I thought that maybe all I would need to do was wipe the HARD drive again, he re-partition, and then create a new partition, call the recovery and then simply copy the content of the key USB/disk backup for this partition. It would even work, or I have to do anything in particular. Assuming that it is even possible with this method?

  Thank you!

  Hello

  You can't do anything manually. If you want to have "initial state" again only thing to do is to reinstall the original recovery image using a created recovery media.

  Before installing recovery image starts the disk HARD integer will be removed, new partitions created recovery image is copied on the HARD disk and as final step recovery image is installed.
  Recovery of installation image and you will have "factory settings" again.