Is it possible to copy a part of a page from the APEX with a public procedure of APEX stored?

Similar Questions

• Printing pictures, is possible to print different pictures on one page at the same time?

  When you print pictures, is it possible to print different pictures on one page at the same time? If this is not the case, the photo paper is lost because you can't get your full 4 prints if you do individually. There is a similar question on the change of the position of the image, that might work. However, the answer is not helpful at all.

  The following steps may be worth a try:

  In Windows Live Photo Gallery... Hold your Ctrl key
  and left click / Select the four pix you want to print...

  In your toolbar left click... Print... Print / Next...

  Now you should see the selection of the photo screen
  the photo printing wizard with the 4 pix selected.

  Left click... ... Left click... "Print options".
  and choose the Type of paper and quality parameters.

  Left click... Next... now you should be on the layout
  Screen.   Scroll and select... 3.5 x 5 cut
  prints cropped and rotation to fit.

  The 4 different pix should appear on the print template.

  Click next and your pix should start printing.

• Is it possible to find what part of my code sends the e-mail.

  I have a problem as follows: an e-mail is sent as a daily alert to the list of recipients. The sender is our group of e-mail to the development team. One of the recipients email is no longer valid. Therefore, every day, we receive e-mail back "ofyour message has not reached some or all recipients planned." because of the invalid recipient. Nobody knows where is the list of recipients to delete this incorrect e-mail address. The code was written years ago by a developer. But we need to delete this incorrect e-mail address to no longer receive this daily email by anyone.

  I tried to get across the code base, but the code is massif, scattered on several servers and several patterns.

  Is my question, there a way to detect this email (which part of the code, package, function, or procedure)?

  Hawk333 wrote:

  I have a problem as follows: an e-mail is sent as a daily alert to the list of recipients. The sender is our group of e-mail to the development team. One of the recipients email is no longer valid. Therefore, every day, we receive e-mail back "your message has not reached some or all recipients planned." because of the invalid recipient. Nobody knows where is the list of recipients to delete this incorrect e-mail address. The code was written years ago by a developer. But we need to delete this incorrect e-mail address to no longer receive this daily email by anyone.

  I tried to get across the code base, but the code is massif, scattered on several servers and several patterns.

  Is my question, there a way to detect this email (which part of the code, package, function, or procedure)?

  sending e-mail code cannot reside in the DB or a part of the core application code.

  As far as I KNOW, the best place to start the detective is associated when the email is sent and correlating what code is / was running at this time.

  CHECK RUN UTL_MAIL;

  RUN UTL_SMTP;

• Backflip: Is it possible to share links to social networking sites from the browser?

  Hi all. I was playing with my Backflip and that most of the time (apart from some odd questions every now and again). I love how I can post updates from a single blow to all my social networks that I have linked to my Motoblur account. It is quite convenient. I did something similar on my computer browser for a while with the help of an add-on called Yoono. Although one thing I can make sure I did not quite understand yet how can I go on the sharing of links on all of my accounts of social network at the same time? Is it still possible to do so directly, or do I have to use the sharing links on individual pages or copy the link and put in an update? Yoono offers a unique button 'share' which will lead the URL I'm at, capture images of the page, I would add a little descriptive text and then send it to networks no matter what I choose in a single process. It saves time by not requiring no me click every button share for each network and add descriptions for everything. Just click once and it goes to all. In the same way that status updates the work of Motoblur. Given that social network accounts are already synchronized with our phones, I was hoping there would be something like that where I could share a link from the browser or RSS reader app and post the link to all my accounts in a single operation without welding. So are there currently such a thing, or what I have to use a workaround? Thank you!

  Download free browser dolphin of the market app. When using it just click the menu button and it gives options for sharing things on different sites.

• Copy the value of the item to another page of the apex in a field

  I have a main table and adds a new button.

  In my master table, there is a client code.

  If I press this button again, I will be referred to another form on another page where I can create log files.

  For the moment, I have to insert the client code in this form.

  How is it possible to copy the customer ID, if I press the new button in the main table, if this customer code (value) will be copied

  in another article on my other page?

  Hello

  What version of APEX are you using?

  Solution for this should be simple.

  Just edit the button element. Assign it "Action when the button is clicked" "redirect to the page of this application.

  "Then set: Set on these elements ' with the name of the target element and the 'with these values" with the name of the source element.

  The same works also for reports. But instead of the nom_element, you must add the column name as: #COLUMN_NAME # for 'with these values.

  Concerning

  J

• problem with the copy of the mots de passe from the old to the new machine.copied key3.dd and signons.sqlite from the old to the new profile, but firefox does not recognize their

  a lot of hassle copying old profile to the new machine... Finally overcome bookmarks but failed to get the passwords recognized... followed advice old conversation community how much/little to copy from the old to the new, with no success

  You copy both files to the correct location?

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: opens showing the file
  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  If you still have access to the old computer, then try this extension:

  • Password exporter: https://addons.mozilla.org/firefox/addon/password-exporter/

• Is it possible to add a small image to view from the list of the press article?

  Hello

  I would like to ask a small image next to the link for my ad on my homepage - www.sunnysideinstantlawn.com.au - is it possible?

  Thank you

  Tammy

  Using the function of the news of the scrap and build your news with the web application instead.

  You can have multiple views of different lists, you can have a custom field multiline text box short introduction, title, date of the course and your image. With this, you can retrieve the value only of an image with the _value option in the image tag.

  You can then thumbnails of BC have only one large image and then small image from your listing.

  You have the detail view friendly of complete SEO for the web application as well as for the full article.

  You can do a lot, it's just how you feel you want and what you do with the installation and layout of it. Much better than the news Module

• Is it possible to disable or remove an add-on from the outside of the FF (it does not start after adding an addon)

  I installed the addon and now FF won't start and seems to be a loop. Is it possible to uninstall the addon or configure FF so that it starts with disabled addons? Don't forget that FF does not at all so I don't have access to one of the internal functions.

  Release the FF is 17.0.1, on Windiows XP/SP3

  In addition, as soon as I did this, I would have the addon added to the red list.

  Open Firefox in Safe Mode diagnosis by holding down the SHIFT key when you start Firefox. Firefox will start with Extensions and some other things off. When done with the Safe Mode, the release of Firefox, wait a few seconds and click the Firefox desktop icon to start Firefox in normal mode.

  More info on who and by removing manually extensions, if any, included in the following articles:

  • https://support.Mozilla.org/en-us/KB/cannot uninstall an add-on
  • http://KB.mozillazine.org/Uninstalling_extensions

  Additional follow-up questions:

  • Name of the add-on?
  • Link to which you downloaded the add-on?
  • Was this a separate application? If Yes, have you looked in Control Panel > add or remove programs (or programs and features) to see if it is listed and remove from there?

• Is it possible to print three labels everywhere for everyone from the point of a sam database?

  I have computer volunteering in a retirement home library where I print three sets of labels for each book entered.  I print an assortment in alphabetical order for each book in three sets.  They asked if it was possible to print three labels everywhere for each book so that there is only a single set that has three labels for each book.  I already have all the books in a database, but have been unable to find a way to print all in alphabetical order in a set with three of the same label wrong.  Thank you, Aziz

  Hello

  Contact the site for printer manufacturers and are looking for a manual on the use of the printer

  or ask the manufacturer of the database

• part of a page from downloaded program cut

  How to restore cut off content on a page of downloaded program?

  Press Ctrl + F5.

  Clicking OK on a page already loaded quickly reloads the page from the cache.

  Pressing F5 is like visiting the page for the first time in a session. Comes from the server or hide them according to the previous activity on the site.

  By pressing Ctrl + F5. Reloads the page fresh.

• Is it possible for me to download lightroom if I registered the product with Adobe? I need to redownload lightroom because my computer has issues an Apple technician he reprogrammed and Lightroom has been erased from my hard drive.

  Can I download lightroom I registered my product at Adobe? I need to download again because I had to reprogram my computer and Lightroom has been erased from my hard drive.

  Hi chases,

  What version of Lightroom are you try top download?

  For Lightroom 4, 5 or 6, please click on the link below.

  Download Photoshop Lightroom

  I hope this helps.

  ~ UL

• Copy a file in VMware machine from the host (for the guest OS) operating system

  Hello

  I need to migrate data in

  guest operating system of the host OS via

  VMware.

  The client runs as a virtual machine in VMware

  that is run from the host operating system.

  Anyone know of a way to do it?

  Thank you

  Stuart

  smcracraft wrote:

  I need to migrate data in the operating system of the host operating system through VMware.

  The client runs as a virtual machine in VMware that runs from the host operating system.

  Anyone know of a way to do it?

  First VMware is a company not a product and you didn't say what VMware product you use no you said what OS is on the host or the guest then I suggest you read the VMware product documentation that you are using.  In general, if the Virtual Machine works in the same way a physical Machine so you can do the same between the host and guest in dealing with clients as if it were a physical Machine.

  If you have VMware Tools installed in the comments you can also take advantage of VMware shared folders and or the functionality of Drag and Drop on pris supported operating systems.

  BTW take a look on: HOWTO: ask (and answer) Questions

• Is A satellite - possible to copy a DVD on my PC?

  Is it possible to copy a dvd on my pc since the dvd watching on Windows Media Player.

  Hello

  I guess you want to watch a DVD movie on your laptop?
  Right?
  Well, you need a software DVD player to watch a DVD movie.

  I use VLC Player it s small and freeware software that allows to read almost all file formats.

• Is it possible to update a styleClass in a table from a Bean?

  How are Hello everyone, you today?

  I use JDeveloper 12.1.2.0.0.

  In my function onDimCoinSelect(SelectionEvent selectionEvent) I get the lines that I have to choose, put a styleClass for my table and for each other tables, I'm going to get the lines to highlight another style.

  So in my first choice, I will select one or more pieces of my parts table (which I have the color with the color green) and the data associated with this selection (for example, the products of the table) will get a few lines of color in one color (white for related data) and other gray color (for data that is not related).

  So, something like this happens:

  (table of coins), selects: euro and dolar-> green color, not select: pound, etc.-> gray

  (products table), data related (for example, product a, b and c)-> color white, unbound (for example, product d, e and f)-> gray

  It works pretty well, but if now restrict my search for one product (say A product) must change now the styleClass my other style and color made it with green and others with the gray wire, since I chose only one.

  My problem here is updating the table itself to detect that I've changed the styleClass.

  I tried to add: AdfFacesContext.getCurrentInstance () .addPartialTarget (dimProduct);

  But if I add to this, I can not select the data with Shift-click for multiple selections.

  Is there another way to update the table to detect changes of styleClass?

  The best way to achieve this is the help that you are an EL Expression. This El Expression can use variables or functions in your bean method, but the decision of the style is decided in the Expression of the El in the styleClass property.

  Here is an example:

  styleClass = 'AFStretchWidth; #{(ControlBean.inicial == 'true')? "style-1': (ControlBean.coin == 'false')?  "style-4': ' {style-0'}"

• Is it possible to determine which parts of the runtime of the BCI are required?

  Recently, I added a few .NET controllers to allow me to use c# written by third-party DLLs.

  A few years ago, due a number of reasons, rather that runtime CVI together with our shipping software, we have stripped the small pieces that were needed to make the software run, which kept the overall size of the package down. Given the size of the complete engine (134MB) and the fact that we probably use very little of it, I'm reluctant to add, given the fact that the package occupies only around 10-12 MB.

  I discovered yesterday that the latest version of our software does not work on machines other than my development machine - either're missing us now stuff CVI.

  You might wonder why I do not use the distribution manager to build. In other words, due to the law American that we are prohibited from any form of encryption beyond a certain level as part of a software project we produce, and the installer at the moment entered in this category.

  So that's my dilemma. My questions are...

  (1) is it possible to determine what might be missing by the simple knowledge that the addition of .NET controllers caused the problem.

  (2) if I use the distribution manager to make a working copy of the software, would it not straight to the before enough to then identify what additional things other than my own code, has been added to make the software work and if so where is the installer put it. I have the impression that something gets stuck in Windows\System32, but are there other places too?

  I hope you can help

  Concerning

  Gavin Summers

  You have been really helpful guys... I'm sorted now... The problem arose mainly because I have 9 upgrade to 2010 and then 2010 SP1 for this project. I already had a local copy of the CVI. Reflector.dll in my (9.0.248) project, or something similar, so that was the cause of the problem, but because I just started testing on machines other than my development machine, I haven't noticed so far.

  I went looking for the new copy of this file, when we moved to 2010 SP1, but found no one. I didn't realize he was locked up in the House - I think he could be in the system32 directory before. I have now managed to get a copy from there and when included in the installer, the project is now working on other machines.

  As I said before that the situation is far from the idea, saw out the locks take out the execution engine of the CVI, but because of the way we ship software and due to the restrictions that are imposed by the U.S. Government on issues of encryption, full runtime is now too big to ship with the software , and we cannot use the MSI installer as its encryption level at least at the last valuation was too high.