Is it possible to create a category selected within another preset category?

Similar Questions

• Is it possible to create a composition widget in another widget of composition? If so, how?

  I am trying to create a site where the entire site is contained in a widget of composition rather than hyperlink menus. The only problem is that I need to have another widget to membership in one of the subsections for some content. I created two widgets but the additional widget does not appear in the appropriate section. When I activate the low mode, it keeps popping up as a separate publication on each single section. How can I make/move the composition in the region of the target of another composition?

  Same trigger can be used for different targets, you should place the containers and trigger inside the primary composition container and then it should show the expected behavior.

  Thank you

  Sanjit

• Is it possible to create a Qt Widgets within After Effects using the SDK?

  Hello

  I would like to use Qt to create dialogs and widgets inside AfterEffects.

  I started with the Panelator sample in the SDK. I can include QtGui in the project, but as soon as I create any object with QObject as a base class After Effects immediately crashes with the following error: '[...] "could not be loaded (48::46)"

  When I try to delay load QtCore.dll and QtGui.dll, I can at least start the plugin and see, that the accident occurred in the initializer of QObject.

  I use

  VS 2010

  QT 4.8.5

  and my buildenvironment is x 64

  I was wondering if there is some sort of incompatibility of incorporation Qt into After Effects (due to the compiler/linker configuration or sets or something like that).

  It is the output of the debugger:

  Inhabitants:

  

  Discussions:

  

  My code of the Panel-constructor function:

  int argc = 0;

  char * argv [1] = {""};

  QApplication * a = new QApplication (argc, argv); ERROR GETTING PRODUCT IN THIS LINE. for a test, I traded it to QWidget * w = new QWidget(); and sometimes as well.

  QWidget * w = new QWidget();

  w-> show();

  one-> exec();

  Beyond the works AfterFX Qt fine and I also can defer loading QtCore and QtGui.

  If someone of you has already experience in the use of QT in AfterEffects, I would greatly appreciate your help!

  Thanks in advance.

  I've heard a similar problen with QtWidgets in a different context, and that the only solution was to connect the Qt libraries statically.

  Another short in the dark: try putting the dll Qt somewhere in the path (if they aren't already) or to the folder where the "After Effects.exe', because I remember, there could be situations where the"current"Directory isn't the plugin but the source of the host folder.

• Is it possible to create physical databases Eve from an another standby database?

  Is it possible to create physical databases idle for another physical standby database? I intend to create the second physical standby database, but I don't want to add more downtime to the production database to create the second database pending.

  You don't have to get the amount of Production downtime. Copy instead, ensure another wait. But, adds the second Eve also in Production for Archive log shipping.

• Is it possible to create a shuttle component in Oracle ADF, where the available and selected lists are tables of the adf?

  Hi all

  
  

  We use JDeveloper Studio Edition Version 12.1.3.0.0 and deployed on GlassFish Server Open Source Edition 3.1.2.2 (build 5) and connect to the SQLServer database.

  
  

  Is it possible to create a shuttle component in Oracle ADF, where the available and selected lists are tables of the adf?

  
  

  
  

  I did a POC sample on it. I can share with you. I can't put in my dropbox because dropbox is blocked in my network. Share your email. I'll send the POC through

• Is it possible to create a spreadsheet Numbers alternating line colors I choose (rather than just a line alternating color)?

  Is it possible to create a spreadsheet Numbers alternating line colors I choose (rather than just a line alternating color)?

  Hi tochan,.

  No, but it is possible to create this look.

  

  Procedure:

  Open a table.

  Format > table

  Check the alternative line color. The yellow value.

  Click the form button, select the rectangle.

  Click the shape to select it.

  Format > Style

  Set the fill color to green.

  The border value without border.

  Move the shape to align with the upper left corner of the table.

  Drag the handle at the bottom right of the form to the lower right of the table.

  Go to organize > Send to back (or backward and repeat until the form is behind the table, and the Green shape is visible through the non colored lines).

  Note that the form is independent of the table. If the lines are added to the table, alternating lines will continue to have the yellow filling, as it has been applied to the table itself, but the lines between indicate white background, until the shape is expanded to match the size of the table.

  

  Select the Table (by clicking on the 'target' at the top left.

  Go arrange > Send backward. (Repeat if necessary until the form is in the front of the table)

  Select the shape.

  Resized according to the table.

  Go arrange > Send backward.

  Kind regards

  Barry

• Is it possible to create a tone coustom (iPhone, iPod, iPod etc..)

  Is it possible to create a tone for my Apple device? I don't want to install anything or convert one of my songs in my iTunes library. I thought he might be a way to use a program like garage band to create a custom tone. If you know the answer to this question please answer, thank you!

  You have GarageBand on your installed Mac?

  Create ringtones in GarageBand 10.1.1.

  • Launch of GarageBand and select this option to create a new project.
  • Select the ringtone project templae.
  • Now to record a sound or drag the loops from the browser of loops to the timeline.
  • Then use the menu share share a ringtone in iTunes.

  Ore of begins with a song from your iTunes library: http://cs.cornell.edu

• Is possible to create the WINS resource record in DNS server and how?

  Is possible to create the WINS resource record in DNS server and how?

  No resource record WINS I can create when it right click on and select "other new records".

  If you were using abusive or foul language, insults, etc. He would get you banned from the forum.

  If you have done any of these, then I suggest that you do the following:

  If banned, ask reason why and offer him your defense

  If not banned, then let them know the name of the person "you kicked off the forum" reports of ill-treatment.   They will study.

  If you haven't seen any action on your report, and suspect that the Forum is not being actively monitored, you can request action by clicking the Site feedback link at the bottom of any Forums page.   -Taken from

  Forums Help FAQ

  http://social.technet.Microsoft.com/wiki/contents/articles/7359.forums-help-FAQ-en-us.aspx#197

  We get off topic with this conversation and the COC States:

  Keep the topics of conversation on track. ............

  .......... Discussions can be blocked in the forum comments if necessary.

  If there is any other questions about WINS, then consider marking response as appropriate.

• Is it possible to create a folder that can hide files automatically, when they are copied in it?

  Hello!!!

  Is it possible to create a folder that can hide files automatically, when they are copied in it? I mean how to program a folder so that everything that he would automatically become hidden? I would be very grateful...

  Is it possible to create a folder that can hide files automatically, when they are copied in it?

  Yes. A sort of roundabout.

  For this example, create a folder on your C drive named HideTest.

  Download http://winsupport.org/utilities/freedos-choice.html Choice.Exe (click on the link to download the utility program near the bottom of the page. "And save it in the C:\HideTest folder).

  Open Notepad and then copy and paste the following text in it:

  Off @Echo

  : All
  Set FilesToHide = No.

  : GoToDir
  C:
  cd\HideTest

  : Top
  CLS
  IF FilesToHide %! Is Yes! Attrib *. * + H

  : Choice
  Choice.Exe /c:YN t:Y, 30 are looking for files to hide
  If ErrorLevel 2 Goto: exit

  : MakeList
  Dir > TempList.Txt

  : CheckFiles
  Set FilesToHide = No.
  Find.Exe "0 file (s)' TempList.Txt
  If ErrorLevel 1 Set FilesToHide = Yes
  If exist TempList.Txt Del TempList.Txt

  : Loop
  Goto: Top

  : Output
  Set FilesToHide =
  If exist TempList.Txt Del TempList.Txt
  Output

  Click on file, then save under...

  Go to C:\HideTest

  Name the file Hide.Bat

  Click Save

  Close Notepad

  Open Windows Explorer

  Go to C:\Documents and Settings\UserName\Start where user_name is your own username.

  In the right pane, right click, select New, and then click shortcut.

  Click Browse, and then navigate to C:\HideTest and click on Hide.Bat, click Next.

  Type a new name or accept the default name and click Finish.

  Right-click on the newly created shortcut, and click Properties.

  Change the race: from the normal window to reduced.

  Click on apply, and then click Ok.

  Restart your computer.

  Note: In the line above Choice.Exe c:YN t:Y, 30 are looking for files to hide, 30 is the number of seconds it will wait before checking the new files. This can be from 1 to 99.

  Edit: Just to satisfy my curiosity, why do you do this?

• Auto create layers from selections or transparency?

  Is it possible that Photoshop can automatically create layers from selections or transparency?

  I recorded a video to try to better describe my question, but basically, I would like to be able to just do several selections, click a button and have each selection extracted on a separate layer.

  Any thoughts anyone has would be appreciated.

  Thank you

  Nick

  Divide into layers | Photoshop scripts

• Is it possible to create an edit on a tabular presentation on Apex option?

  Is it possible to create an edit as on an interactive report option. , But on a tabular presentation I want to make a link to a form for a selection of special line, which will have also one tabular presentation for another table.

  found the way to do even when trying to do something else. pretty lucky.

• Is it possible to create a generic image of Windows 7?

  Hello world

  Is it possible to create an image of gold that can be "deployed" on multiple machines?

  If so, how do you?

  Kind regards

  Nick

  as mentioned by others, there are many ways... WDS, SCCM, Windows AIK and windows deployment Toolkit etc. to deploy to create the image...

  For VMware is the best and easy thing you can do

  1 - Install VM windos7 and install VMware tools and customize it according to your need

  2 - Sysprep image - if you want to regenerate the SID

  Now to run sysprep, you must launch the administrator command prompt. Then navigate to the sysprep folder by typing: cd sysprep and press to enter.

  

  Then, enter the following commands:

  Sysprep/generalize/shutdown /oobe

  3. This stops the virtual machine.

  4 now, create a virtual appliance in the OVF format or egg, merge, select the virtual machine and in the menu bar > click file > then select the "export to OVF" then give a file name and a location. In the name of the file name with the extension of file OVA. It's VMxxxxxxx.OVA that will save the device in a single file.

  5 - Once finished, you can use this OVA for a deployment, or simply, you can also copy the VMDK virtual machine. OVA will consume less space than the VMDK.

  NOTE: If you want to do the automatic cusotmization which is after the SYSPREP you need an answer file to automate the rest of the deployment process. You can use free tools like VLITE (http://www.vlite.net/download.html) or Windows System Image Manager (WSIM)

  Once the answer file created, give a name to this file as unattend.xml or Autounattend.xmlfile.

  Copy or the unattend.xml file to: C:\windows\system32\sysprep.

  then run the sysprep tool

  Sysprep/generalize/shutdown /unattend:unattend.xml /oobe

  An answer for Windows Vista and Windows 7 file is an XML file that contains the definitions of parameters and values to use during Windows Setup.  The best way to create an answer file for use with a Windows 7 deployment is to use the Windows System Image Manager (WSIM) which is part of the Kit Setup automated Windows (Windows AIK or WAIK).

  
  http://TechNet.Microsoft.com/en-us/library/cc749113%28V=WS.10%29
  http://TechNet.Microsoft.com/en-us/library/dd349348%28V=WS.10%29.aspx
  http://TechNet.Microsoft.com/en-us/library/cc749317%28V=WS.10%29.aspx

• Is it possible to create two-way multiselect tables? Help.

  Hey everyone (once again since you're indeed great to help me to).

  I was wondering if it would be possible to create two-way multiselect tables to interact with each other, as qlikview behavior have, because that's my goal.

  Imagine that I have 3 tables in my schema/database:

  Departments (of an HR diagram), with the following attributes: department_id (primary key), department_name, manager_id, location_id;

  Salary_by_job (created for this purpose), with the following attributes: job_id (primary key), department_id, salary, min_salary, max_salary;

  Employees (from HR diagram), with the following attributes: employe_id,..., job_id, salary, manager_id, department_id

  Would it be possible to creat multiselect two-way tables?

  Like the following:

  -I click on a Department, it shows the data relevant to this Department in the table salary_by_job and the employees table.

  And after having clicked on that, I could click on a single employee and the department table would be the same (because it's an employee in the same Department), but the salary_by_job would show only the information about the argument job_id for this employee.

  I'll try to show some text here:

  Department (selected line = 1) = Department of Public Information (which has 3 employees)

  Employees = X (with the job_id = adminargument), are (with the job_id = managerargument) and Z (with the job_id = Internargument)

  Salary_by_job = Admin, with data blah blah blah, Manager, with data blah blah blah and trainee, with data blah blah blah

  And then I have to click on the X of the employee and the result would be:

  Department (selected line = 1) = Department of Public Information (which has 3 employees)

  Employees = X (with job_id = adminargument)

  Salary_by_job = Admin, with data blah blah blah

  Can do something like this? If so, how?

  I think attached with fasteners at each table and have links to move forward and backward.

  If anyone has an idea how to do this, please respond, it may be useful.

  Thanks a lot for all the help. Have a beautiful day!

  Kind regards

  Frederico Barracha.

  BTW, I use jdeveloper 12.1.2.0.0

  Mensagem editada por: FredericoSB

  FredericoSB,

  Have you tried to add a setPropertyListener for tables and change the collectionModel to the 3rd table accordingly?

  Ex: Suppose you have three tables, Parent (VL)-> child (VL)-> grandchild. There is a relationship between the (VL) Parent-> child.

  Now, you can have links to tree for both the GrandChilds (for example GrandChildViaParent and GrandChildViaChild).

  Your jspx could be something like

  If all your tables are read-only, then you can change it to something like

  This is just a sample. You could implement the same for all properties in the table of a grandchild as EL to make editable as well.

  It comes without coding. If you care to code a little, you could use a dynamic array in place and tie the value accordingly in each of the selectionListener in the table (that would be a neat approach)

  Arun-

• How to create a 'category' for the brushes?

  I've collected a ton of different types of paint brushes. To keep all in my active brush Panel seems to slow down Photoshop and my computer, and it is difficult to sort all the when you are looking for a particular brush.

  Is there a way I can create a category for certain types of brushes, as the default categories that appear at the bottom of the context menu brush Panel (calligraphic, false finish brushes...)? An example would be a category for all my brushes of foliage (leaves, grass, Moss, trees, etc.).

  Or is there a better way to keep similar brushes orgainized together and accessible in the PS brush Panel? Thank you

  Hi rich,

  Yes, you can get your brushes to show up in the menu of the Panel under all the built-in brushes. But it is a few steps, follow me.

  Start by creating your predefined. Looks like you already know how to do this, but I'll repeat the steps for someone else.

  Click the create predefined in the Panel forms.

  

  The name of the brush.

  

  Create as many other preset that you like.

  When you have all your brushes. Choose the Preset Manager in the brushes Panel menu.

  

  This opens the preset manager.

  

  Shift + click or Cmd/Ctrl-click to select the brushes you want to have in their own game. Then click on the button Save the value. This opens the dialog box save the value.

  

  This should open in the brushes folder that is located in the Presets for Photoshop. Don't go anywhere else. This is where you want to be.

  Name your game (such as foliage), and then click Save.

  You can now delete these brushes from the preset manager.

  Restart Photoshop.

  Your brushes custom if poster at the bottom of the Panel forms Preset.

  

  At any time, you can choose the brushes. An alert will ask you if you want to replace (throw all your other brushes and insert those custom) or append (add brushes to those you already have). I usually add.

  

  Let us know if that helps.

• Is possible to create link?

  I use LiveCycle designer as part of Acrobat 9.  Is it possible to create a link in LiveCycle?  If so, it is not obvious to me.  How to do this?

  You have 2 options to use...

  You can place a button and change the border to white. In the legend set the police to highlight. In the click event, you can write code to open a URL.

  You also have an option to create the hyperlink from the Insert menu-> hyperlink... To use it, place a text on the form object and then place the cursor in the text and select Insert-> Hyperlink.

  Thank you

  Srini