Is it possible to create some custom shapes in the form of buttons for the composition of ToolTip widget?

Similar Questions

• Is it possible to create a tag that lists the individual labels [keywords] for each position? The current {tag_blogtaglist} creates an endless list of tags.

  Is it possible to create a tag that lists the individual labels [keywords] for each position? The current {tag_blogtaglist} creates an endless list of tags.

  If you can get hands on with the ID of blog post that you can list the tags assigned to this post particularly blog using module_data. It would be only possible with the new BC. Active following rendering engine. Here are some resources to point you in the right direction: how to activate the BC. Next - http://docs.businesscatalyst.com/developers/liquid/introduction-to-liquid#enable how to use module_data - odule_data http://docs.businesscatalyst.com/developers/liquid/consuming-apis-in-the-front-end-using-m install app BC API discovered to get you started on the syntax - http://docs.businesscatalyst.com/developers/apps/bc-api-discovery module data that lists the tags assigned to a blog post looks like this: {module_data = 'blogposts' version = "v3" field resource = subresource 'tag' = "tags" resourceId = collection "303870" = "myData"} resourceId is the blog ID to render tags for. Hope this helps, Mihai

• Is it possible to create a style sheet in the APEX?

  Hi experts,
  
  I'm in I'm in Oracle Enterprise Manager 11 g 11.2.0.1.0.
  
  Is it possible to create a style sheet in the APEX of any version?
  I want to create a style sheet and use APEX report column link to it.
  
  Thank you.
  
  Cow

  Well, mine is about 4 000 lines of code to cover all of the tables in my database, so I have a separate procedure in the package for each table.

  I'm going by calling a procedure doc_start that comes to generate the HTML page header, as follows:

  PROCEDURE doc_start
  IS
  BEGIN
  HTP.
  PRINT)
  '');
  HTP. PRINT (')');
  HTP. PRINT (')');
  HTP.
  PRINT (')');
  HTP.
  Print(' ');
  HTP. Print(' ');
  HTP. PRINT (')');
  HTP. PRINT (')');
  END doc_start;

  Then I get calls to all other procedures for tables, then I just end with a doc_end procedure to add the required data for end to an HTML page:

  PROCEDURE doc_end
  IS
  BEGIN
  HTP. PRINT (')');
  HTP. PRINT (')');
  END doc_end;

  All basically, it's pretty simple, although a lot of time. The initial package of writing took me a whole day to write, and then I had to go back several times over the years to add some adjustments or other re-formatting.

  Hope that this help put you on the right track.

• Is it possible to create a new file using the XML via java Script?

  Hello everyone,

  Is it possible to create a new file using the XML via java Script

  • I have xml information that need to use for file name, size.
  • Based on xml file we can create a new file in InDesign with java script?
  • Kindly help me if anyone has an idea about this.

  I use InDesign CS4 on windows 7

  Sample file is attached below.

  Kind regards

  Siva

  <UpdateAd>
  <AdId>3403699</AdId>
  <Width type="mm">91,79</Width>
  <Height type="mm">80,00</Height>
  <ProductionCategory>4</ProductionCategory>
  <BookedCCIColors>sw</BookedCCIColors>
  <WorkFlowType>PDF</WorkFlowType>
  <CustomerNumber>652224</CustomerNumber>
  <CustName1>Erich Prang</CustName1>
  <Description/>
  <Description2>R</Description2>
  <UpdateIns>
  <Titel>RHZ</Titel>
  <Publication>B2</Publication>
  <RunDate>26-07-2011</RunDate>
  <Zone>H30</Zone>
  <KDDATEN>nein</KDDATEN>
  </UpdateIns>
  <WorkflowStep>IR</WorkflowStep>
  <Proof>No</Proof>
  </UpdateAd>
  
  

  

  Try this:

  var f =File.openDialog ();
  f.open('r');
  var xml = new XML(f.read());
  f.close();
  
  var myDocument = app.documents.add();
  myDocument.documentPreferences.pageHeight = xml..Height+"mm";
  myDocument.documentPreferences.pageWidth = xml..Width+"mm";
  var rect = myDocument.pages[0].rectangles,add();
  rect.geometricBounds = myDocument.pages[0].bounds;
  rect.strokeAlignment = StrokeAlignment.INSIDE_ALIGNMENT;
  rect.strokeColor = myDocument.swatches.item("Black");
  rect.strokeWeight = 1;
  myDocument.save(File(f.path + "/" + xml..AdId + ".indd"))
  

  Substances

• Is it possible to create a custom panel and docking station / integrate it into the application?

  Hi all

  I would like to create a custom panel and docking station / embed it in first Pro CC.

  What's possible?

  Basically, the plugin will talk to some web services, recover some data and display them in this special group.

  Any idea?

  Yes, it is quite possible. lwg3000, please write to me directly, and I will give you all the relevant information.

• Is it possible to create Transaction Type command in the world?

  Hello

  We do 200 ORGANIZATIONAL unit configuration. Where each OU works the same way.

  In the management of orders, we need create transaction Types of command for each ORGANIZATIONAL unit.

  Is it possible to create a Type of Transaction that can be used worldwide (in multiple OUS).

  Appreciate any help on this.

  Thank you

  LS

  Hello

  The answer is simple-no

  Each transaction type is linked to an ORGANIZATIONAL unit design. There is no way that you can change that.

  Kind regards

  Bashar

• Is CP5.5 - possible to create a summary screen of the quiz with all issues on one screen?

  Hello Forum members

  I was wondering if it is possible, rather than having a quiz to review where you look at a screen at once quiz questions, it is possible to create a quiz summary screen, which will provide a summary that the questions were answered incorrectly/correctly (without actually giving the user the correct answers)?

  Below is an example of what I want to achieve:

  

  Is this possible in CP5.5? Perhaps with stocks advanced/variables?

  Thank you very much

  Loraine

  For more information, Lilybiri has now provided a more detailed explanation of how to realize the idea of vishhere above, which can be found at:

  http://forums.Adobe.com/message/3995154#3995154

  Thank you very much

  Loraine

• Is it possible to call a custom method in the App Module to a backing bean?

  I would like to know if a custom in the App Module method can be called from inside of a pod of support.
  I don't know if it is logically just call, to a backing bean, a custom in the App Module method. But I would like to know if this is necessary or if it is possible.

  Hello..
  Yes it is possible. You must add this interface method customer of AppModule.Now you can see this method in data Controls(Refresh the data control). To call this method using bean, should be added as an action method links (click on links > + > methodAction > and create the binding of the action).
  Now, you can call this method in the bean class.
  Check like uses this concept to run the display criteria

  http://ADF-Lk.blogspot.com/2011/05/Oracle-ADF-create-view-criteria-and_4727.html

• Can appeal to all colleagues VCPs, and vExperts there, you give me advice on how to start evangelizing VMware technology? How to create a free blog site? Is it possible to create free blog sites, as a start to qualify for a title of vExpert?

  Or contributes to the VMware community site enough as a criterion to become a vExpert? I just want to start evangelizing and sharing my virtualization/cloud computing knowledge and professional daily experiences as early as possible for some systems engineers of entry-level out there like me. Thank you very much. I hope that vExperts, or VCDXs out there can help me out on this important survey. Thank you guys so much!

  Thread has been moved to the virtual fair.

  About to start a blog there are many free solutions (see for example the Wordpress site).

  But it is not a magical set of tasks to become a vExpert... is not a certification where you will need to pass an exam.

  Have you seen the previous form of vExpert? There is a lot of point where you describe what you do.

  Blog site, twitter, VMware community, books, VMUG,... are simply a set of them.

  I can only suggest to just start, use Twitter and Google + (there is a good circle of John Troyer).

  Need help in the community, write some post, and so on...

• Is it possible to create menus without boxes around the text?

  I'm relatively new to Muse, but I'm hooked on this issue.  I would like to insert a text menu without boxes around the text.

  What I tried:

  Moved in a horizontal menu of the Widget Library to my head for my main menu.  I have spent over an hour trying to find a way to make the surrounding areas go, but I can't.  I realize that I can insert text and text a link to some pages, but I don't want to have to do that if possible.

  Thank you!

  Hello

  You can use no padding for menu items and set the same for all States:

  

  Also if there is value stroke, you can decrease up to 0 which would remove all border weight.

  Let me know if I'm missing something here.

  Thank you

  Sanjit

• Is it possible to mark several custom components in the same namespace prefix?

  Hello

  I've referenced several .swc library in my Flex project. The problem is that what I realized, is that they do not have the same namespaces, so that I have set a separate for each .swc file label, such as my Application tag looks like this:

  " < = xmlns:fx s:Application ' http://ns.Adobe.com/MXML/2009 "
  xmlns:s = "library://ns.adobe.com/flex/spark".
  xmlns:MX = "library://ns.adobe.com/flex/mx".
  xmlns:test = "" some.namespace. * ""

  xmlns:Test2 = "" some.otherNamespace. * ""

  < / s:Application >

  In this example of a reference library components would be called by the prefix of the trial, while another reference library will be called by the prefix test2.

  I realize that the simplest solution would be to combine all the components into a .swc file, but it is important to separate the .swc files as it is (one of the reasons is that I don't have the source files for most of the .swc to merge together).

  So is it possible in Flex to define several namespaces for a tag prefix, or they are strictly a one-to-one relationship?

  Thank you

  Patrick

  No, the link I mentioned did not mention on the fusion of everything together, he mentioned on the unique prefix for all components in a .swc, if you have access to the source of the library, you can follow the steps mentioned in the link to get a unique prefix, or well, it's a bit impossible to do without access to the source.

• How to create a custom tab adf in oim 11 g for self-service

  Hi all
  
  
  I want to create a new tab in self-service console using the code from the box. Any suggestions please
  
  
  Thanking you

  See the link below:
  http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/FMW/OIM/oim_11g/customize_oim_ui_selfservice_tabs/customize_oim_ui_selfservice_tabs.htm

  Kind regards
  GP

• Browse all text layers, read a specific selector and create some key based on the selector of those images.

  Hello

  I have about 50 ~ layers of text, each of them I got a text named 'Anim' with a few keyframes specially positioned selector.

  What I need is to read the key images of each selector Anim and add a new effect (lets say, glow for example) to each layer text to the help of some(not all) of Anim keyframes and the values set on all of them (as we use glow, could be the threshold for example).

  I can handle calculations, that I just need are the syntax to achieve these key frames and assigning values to them.

  Thanks in advance.

  To get the value of a keyframe you just use the method keyValue() as follows:

  SELECT. Property ("End"). KeyValue (i);

  where i is the index key.

  Dan

• When you create a custom control, why the option point photo is deleted?

  I adapted a system boolean to add pictures for each of the 6 States (including mouse pointer) by selecting the part of the image in the list and import the image from a .png file.  After the resizing of the control, I replaced every image with a new in size has been fixed.  After replacing the sixth image, control always shows now that he has highlighted version and the photo entry in the run menu item disappeared.  How to restore the behavior of the control for all the images of six?

  The affected .ctl file is attached:

  Edit: I work in Labview 8.6.1f1.

  Well, back to the registered version of the control and repeating the process seem to have it fixed.  Guess that's just one of those quirks bit labview that make it so painful to use editor.

• Is it possible to create an account with all the rights of an administrator of domain, except the privilege to read and modify the security event logs.

  The account will also be restricted to change its own priveliges.

  Hi Ddcrre,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the Forums in TechNet Windows Server.