Is it possible to create an account with all the rights of an administrator of domain, except the privilege to read and modify the security event logs.

Similar Questions

• Reference Dell T610 with 5 hard drive problem (5x2TB) while create RAID 5 with all the HARD drive. :(

  Dear Sir.

  While I have already configured the RAID 5 with 5 disks, then the OS (windows 2008 R2) installation step I saw 2 separate partitions. and can I install it on the partition with only 2 TB. Another, we can't. So during my installation completed OS, then I can use only 2 TB, for another volume is about 5 TB can't do anything. Can I do the RAID 5 with 5 disks (10 TB)?

  I wait your helpful to my set.

  Thank you.

  silamay

  This is new server, there is not any data yet so I can reinstall. What I want is that I just want to RAID 5 until I started my DC project. I already look for how to convert to GPT, but I'm not at all.  I know that I can't convert GPT as the OS in the same disk but that is because I try to configure RAID 5 and OS, but while over OS I do not see another 5 to just see only 2 TB.

  I don't understand most of what you wrote.  You must activate the UEFI (below), then convert to GPT before installing Windows.

  silamay

  How can I install on a UEFI system?

  The T610 supports UEFI, but must be allowed.  Start the BIOS (F2) Setup and change the boot mode in the UEFI instead of BIOS/inheritance.

  Your alternative is to create a RAID 5 using all disks, but the definition of the size as something as small as 2 to, then another RAID 5 with space remaining.  Each table will be displayed in Windows as a separate 'drive' - you can then install normally in the smallest 'drive '.

• I bought the PC Version of Fable III of this year early and installed and created an account with games for windows Live!

  I bought the PC Version of Fable III of this year early and installed and created an account with games for windows Live! About 2 months ago, I formatted my computer and reloaded windows 7! Last night I downloaded Microsoft Flight and used my existing account to play! Today, I installed Fable III and the game won't start as it says that I am not connected to the internet! This is wrong since I write here for you! Why my game will not, organize that I have connected to my account last night with problem now? Please help me?

  Yes, unfortunately GFWL's an imperfect system. Steam has similar problems. I find the best way to avoid
  problems is to play all the games that are related to a system off line.
  I have absolutely no interest in what GFWL can offer online, in any case.
  Many games have a "fix" for GFWL, which are generally easy to find through a search.
  Of course these only help facilitate offside line.

  Try Timeslips Fable 3 GFWL remover - it is well known in the modding community, particularly
  its managers mod for Bethesda games and his job is safe to use.

  http://Timeslip.users.sourceforge.NET/

  .

• I created an account with Hightail (and received and responded to the verification email) but when I click on the down arrow next to Lacrosse "join".

  I created an account with Hightail (and received responded to the verification email), but when I click on the arrow next to the button "join" the 'link' button does not appear.

  Have you added hightail in the menu (alt + T) tools > options > Annexes > out.

• tried to create an account with xbox (software on my computer) and it won't let me download anything from there. Is there a setting I need to change or take it back to the store?

  I just bought a new laptop about 4 days ago. It came with 10 Windows. The problem I have is, it does not download anything. I tried to share a youtube video, and it wouldn't let me. I tried to create an account with xbox (software on my computer), and it won't let me download anything from here. Is there a setting I need to change or take it back to the store?

  Thank you

  Michelle

  Hi Michelle,

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are unable to download anything.

  I would like to know some information.

  1. You are connected to the internet?

  2. You get no matter what error code or error message?

  Please check the date and time system and check if it is up-to-date.

  If it is not set correctly, please follow the link to change the date and time:

  http://Windows.Microsoft.com/en-us/Windows-8/clock-out-of-sync

  I suggest you follow the steps to run the internet connection Troubleshooter:

  Follow the steps below:

  (a) affects Windows and x together and select Control Panel.
  (b) click on troubleshooting.
  (c) click show all in the left side panel.
  (d) click on Internet connections.
  (e) follow the on-screen instructions to resolve this problem.

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Is it possible to create a form with text boxes of "adjustment" to the participants to answer the questions?

  Is it possible to create a form with text boxes of "adjustment" to the participants to answer the questions? Questions are open to everyone, so asking narrative responses.

  Hi landon39843319,

  You can have fields flowing / more dynamic in a PDF of LiveCycle Designer form, but not in an AcroForm (only created in Acrobat).  LiveCycle Designer is a program completely separated used for are delivered with each purchase Acrobat Acrobat XI has been release.  Now you must buy separately.  But LiveCycle Designer PDF forms are wrapped in a shell of PDF so that they will be displayed and can be filled in the free Acrobat Reader DC and earlier versions.

  If you do this in Acrobat with an AcroForm, you have as much information typed into a field that the user wants, but he's going to show everything on the screen.  Displays only the text that fits into the field, then a + sign will appear in the field to indicate that there is more text in this field, you can scroll down to read.  You can also set the automatic font size so that as more text is entered in the police becoming smaller and smaller to adjust the text, but that is usually not desirable for many forms.

  Hope this helps,

  Dimitri

  WindJack Solutions

  www.pdfscripting.com

• How to create a user interface, where my customers can create an account with my site

  How to create a user interface, where my customers can create an account with my site

  Hello

  Some associates of threads

  Re: How can someone create an account / register on my site?

  Re: Can I create a login/password in the Muse for a HTML5 page or two?

  Let me know if you have any question.

• Is it possible to create an installation of windows with all the current windows updates integrated?

  I wonder how to create Windows 7 installation with all the current updates, to date I do installation, integrated into the installation.

  Here is a link to the IT Pro forum: http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/da7702a8-c216-46ae-ad36-791de1bced21

  If this isn't answering your question, then create a new post / ask a question on the forum Pro COMPUTER: http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/threads

  J W Stuart: http://www.pagestart.com

• Is it possible to create a tag that lists the individual labels [keywords] for each position? The current {tag_blogtaglist} creates an endless list of tags.

  Is it possible to create a tag that lists the individual labels [keywords] for each position? The current {tag_blogtaglist} creates an endless list of tags.

  If you can get hands on with the ID of blog post that you can list the tags assigned to this post particularly blog using module_data. It would be only possible with the new BC. Active following rendering engine. Here are some resources to point you in the right direction: how to activate the BC. Next - http://docs.businesscatalyst.com/developers/liquid/introduction-to-liquid#enable how to use module_data - odule_data http://docs.businesscatalyst.com/developers/liquid/consuming-apis-in-the-front-end-using-m install app BC API discovered to get you started on the syntax - http://docs.businesscatalyst.com/developers/apps/bc-api-discovery module data that lists the tags assigned to a blog post looks like this: {module_data = 'blogposts' version = "v3" field resource = subresource 'tag' = "tags" resourceId = collection "303870" = "myData"} resourceId is the blog ID to render tags for. Hope this helps, Mihai

• Is it possible to create a style sheet in the APEX?

  Hi experts,
  
  I'm in I'm in Oracle Enterprise Manager 11 g 11.2.0.1.0.
  
  Is it possible to create a style sheet in the APEX of any version?
  I want to create a style sheet and use APEX report column link to it.
  
  Thank you.
  
  Cow

  Well, mine is about 4 000 lines of code to cover all of the tables in my database, so I have a separate procedure in the package for each table.

  I'm going by calling a procedure doc_start that comes to generate the HTML page header, as follows:

  PROCEDURE doc_start
  IS
  BEGIN
  HTP.
  PRINT)
  '');
  HTP. PRINT (')');
  HTP. PRINT (')');
  HTP.
  PRINT (')');
  HTP.
  Print(' ');
  HTP. Print(' ');
  HTP. PRINT (')');
  HTP. PRINT (')');
  END doc_start;

  Then I get calls to all other procedures for tables, then I just end with a doc_end procedure to add the required data for end to an HTML page:

  PROCEDURE doc_end
  IS
  BEGIN
  HTP. PRINT (')');
  HTP. PRINT (')');
  END doc_end;

  All basically, it's pretty simple, although a lot of time. The initial package of writing took me a whole day to write, and then I had to go back several times over the years to add some adjustments or other re-formatting.

  Hope that this help put you on the right track.

• Is it possible to create a new file using the XML via java Script?

  Hello everyone,

  Is it possible to create a new file using the XML via java Script

  • I have xml information that need to use for file name, size.
  • Based on xml file we can create a new file in InDesign with java script?
  • Kindly help me if anyone has an idea about this.

  I use InDesign CS4 on windows 7

  Sample file is attached below.

  Kind regards

  Siva

  <UpdateAd>
  <AdId>3403699</AdId>
  <Width type="mm">91,79</Width>
  <Height type="mm">80,00</Height>
  <ProductionCategory>4</ProductionCategory>
  <BookedCCIColors>sw</BookedCCIColors>
  <WorkFlowType>PDF</WorkFlowType>
  <CustomerNumber>652224</CustomerNumber>
  <CustName1>Erich Prang</CustName1>
  <Description/>
  <Description2>R</Description2>
  <UpdateIns>
  <Titel>RHZ</Titel>
  <Publication>B2</Publication>
  <RunDate>26-07-2011</RunDate>
  <Zone>H30</Zone>
  <KDDATEN>nein</KDDATEN>
  </UpdateIns>
  <WorkflowStep>IR</WorkflowStep>
  <Proof>No</Proof>
  </UpdateAd>
  
  

  

  Try this:

  var f =File.openDialog ();
  f.open('r');
  var xml = new XML(f.read());
  f.close();
  
  var myDocument = app.documents.add();
  myDocument.documentPreferences.pageHeight = xml..Height+"mm";
  myDocument.documentPreferences.pageWidth = xml..Width+"mm";
  var rect = myDocument.pages[0].rectangles,add();
  rect.geometricBounds = myDocument.pages[0].bounds;
  rect.strokeAlignment = StrokeAlignment.INSIDE_ALIGNMENT;
  rect.strokeColor = myDocument.swatches.item("Black");
  rect.strokeWeight = 1;
  myDocument.save(File(f.path + "/" + xml..AdId + ".indd"))
  

  Substances

• I created a shortcut icon to my favorites, I'm done with ALL the Favorites as separate icons on my desktop

  original title: destop icon problems, I created a shortcut icon to my favorites... I'm done with ALL the Favorites as separate icons on my desktop. I can't see even my previous icons or my screen saver picture... It is under the many many icons off my favorites folder. How can I get rid of them all at once rather than individualluy... which will be forever! @!!! ???

  I created a shortcut icon to my favorites... I'm done with ALL the Favorites as separate icons on my desktop. I can't see even my previous icons or my screen saver picture... It is under the many many icons off my favorites folder. How can I get rid of them all at once rather than individualluy... which will be forever! @!!! ???

  See if you can get out of this mess by doing a system restore. Choose the date until you have created this shortcut as you restore point.
  In case you need the "How to":

  Start button > Search box, typeSystem Restore > press enter > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I want to go back to the previous version of 2014.2.  .3 is far too buggy and full of error messages. Create problems because I'm on a timeline with my client and I don't have time to fool around with all the problems.

  2014.3 is far too buggy and full of error messages. Create problems because I'm on a timeline with my client and I don't have time to fool around with all the problems.

  You don't mention what you have encountered errors? Workaround for the problem more frequently reached here is Re: error in Muse: object UID:U6875 has two (or more) owners: U3633 and U3165

  If you have a copy of your .muse file that has not been saved by using 2014.3, you can downgrade by uninstalling Muse, and then choose the previous Version in the drop-down list of filters in the Panel of Apps from the desktop creative cloud application. There will be a popup next to the Muse, where you can select a version prior to install.

• Create a table with all kinds of oracle data types?

  Hello
  who can give me a small example to create a table with all kinds of oracle data types? and the example to insert it?
  
  Thank you
  Roy

  Hello

  Read the fine manual. It contains examples at the end of the chapter.

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14200/statements_7002.htm

  I don't know if you know that you can also create your own data types using 'create a type '. So look for examples that are of your interest and not for all types of data.

  Concerning

  Published by: skvaish1 on February 16, 2010 15:33

• I have a desktop white with all the icons and the taskbar, but cannot set the background.

  original title: I have a white desktop with all icons and task bar, but can't set a background. Nothing happens when I right click on the desktop to adjust only the properties please help

  We have a white desk with all the icons and taskbar. Everything I've looked up tells me to enable desktop but nothing happens when I right click so I'm unable to get the properties of office, I also tried to do system restore and also a reactivation on the desktop but nothing. Please help any suggestions would be helpful.

  Hello Carlapalsrok,

  Thanks for your post.  You experience this problem on all user accounts?  If you have not tested, try the following:

  Click Start > right click on my computer > select Manage

  Expand local users and groups

  Click on the users folder > in the right pane, right-click and select new users

  Fill in the appropriate data to create a new user account.

  To disconnect from the computer and log on as the new user

  You still see the white background?

  We can't wait to hear back on your part.

  See you soon