Is it possible to do a repair install on an OEM system to solve problems of SFC. Can if so someone help?

Similar Questions

• Install Windows 8 OEM System Builder DVD on aspire S7

  Do I need to implement all special partitions? Can I download drivers S7 beforehand? or Windows 8 will automatically find them?

  Well, I've just finished using Acer Recovery Management.

• Can blackBerry smartphones someone help my please? AS SOON AS POSSIBLE

  I bought a game that is ultimate 4pics1word by visa, I have put all my details in correctly and its projection just 'Please wait' has demonstrated for 30 minutes now. I also had a receipt that I bought it. What should I do?

  SOLVED thread

• Is it possible to do a Vista repair install and activate with the same product key?

  If I perform an in place upgrade to Windows Vista box, I use the key number that I have or I'll

  need a new license key number? Thank you.

  * original title - in the upgrade of the Vista place *.

  Thanks for your help, I want to do a repair install and I just want to know if I could use the license key number I have before

  I go through the repair.

  Hé ch321

  happy to help you

  Yes, it's your product license key to repair install your version of vista

  Just follow this tutorial in the link I gave you

  one thing to watch is to make sure you that read the part of service pack

  If you have installed sp2 and your vista dvd has only sp 1 uninstall sp2 on the installed vista to install repiar then download sp 2 new

  Walter, the time zone traveller

• After installing something from windows update my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turn off.

  Hello

  After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
  Then a window pops up saying "Startup Repair cannot repair this computer automatically.
  The details of the problem say;
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
  Signature of the 04:65537 problem
  Signature of the problem 05: unknown
  Signature of the 06 problem: BadDisk
  Signature of the 09 problem: unknown
  Signature of the 10:1168 problem

  System Restore does nothing, and all the other tools of recovery. :(

  Please help, it will be much apreciated :)
  DOM

  If you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.  MS - MVP - Elephant Boy computers - don't panic!

• I do a windows XP repair install, but its not taking the certificate of number of Authenticity on the cover of the cd why

  I do a windows XP repair install on my Dell on safe mode, but when I use the certificate of authenticity of 25 characters on the cd envelope it tells me that these are numbers are not valid!   Help

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  If the activation of the Internet does not work, then see the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  ===================================================================

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: http://www.pagestart.com

• possible future needs of the installed cartridges

  I have an OfficeJet Pro 8100 printer and I just replaced my cartridges installation.  Is it possible that I need these ever again?  In other words, are there any circumstances in which the printer may need to 'reset' that require the presence of the cartridges installation?

  Thank you

  PROVIDE

  Hey provide,.

  If you have configured the printer before with success, then you will not have these cartridges Setup again for the printer HP Officejet Pro 8100.  These can be eliminated in a respectful way (instead of an ink cartridge recycling).

  The only time that these may be necessary once again, this is if the printhead needs to be replaced in the x 8100. According to the HP paper for cartridges SETUP:

  • When you install a new print head, you must install the cartridges supplied with the print head CONFIGURATION.

  I hope this helps.

• You plan repair install XP - Partition but does not show an installation of XP

  running XP Professional on computer dell laptop.  My hard drive is a Seagate Ultra ATA 100 GB.

  After getting a blue screen, I have tried a reboot.

  1. now the message I get is "a disk read error occurred" so I boot from the disc and did the following in the recovery console

  -Chckdsk/r/p gives me the following message "volume appears to contain one or more unrecoverable problems.

  -Fixmbr and fixboot executed successfully

  -Run the Seagate (Seatools) utility to check for problems and he found.

  -Re-booted from the disc and tried to re - install xp over xp of origin (not to lose data).  However, the installation screen does not show a partition with XP installed.  It shows a partition with 100 GB and 100 GB free.  I have the option to install xp on my C drive but I don't have the opportunity to do a "repair installation".

  My question is what happened to my xp installation?  and what are my options for recover my operating system without losing all my data?

  Hi five_betty,

  It seems that the hard drive is damaged. We recommend that you contact Seagate support team diagnose the hard disk and correct any mistakes or to replace.

  Check if you follow the right steps to make the repair install.
  See Method 2: Repair the installation of Windows XP by starting your computer from the Windows XP CD in this article

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista repair install

  I heard of what is called a Vista repair install.  I have Vista Home Premium on my computer.  I have the disc from a friend who said that Vista SP1.
  * Do a repair with these elements installation?
  * After the installation of repair, I have will always be a legal copy of Vista on my computer?
  * How to repair and installation than that accomplished?

  As long as it's a DVD of Microsoft Vista, NOT a Dell, HP, etc. recovery disk, you can use it for a repair installation.
  It will be legal.
  Read the theTutorial below.
  It reinstallls the files on your system, while keeping your data (it's a repair installation!): but you should ALWAYS backup your DATA

  Read this tutorial on how to do a repair installation:

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Make sure that Service Pack levels are OK when you do it.

  On your installed operating system Service Pack level cannot be greater than what is on the disk to upgrade.

  Click Start > right click on computer > properties > system > it will tell you which SP you have install.

  http://support.Microsoft.com/kb/948537

  "How to uninstall Windows Vista service packs"

  If the installed OS has the disk with Service Pack 1 and Service Pack 2 > uninstall SP2 installed operating system > install repair Upgrade > reinstall SP2.

  And run the upgrade of a Vista operating system.

  See you soon.

  Mick Murphy - Microsoft partner

• Used the wrong Vista disc to repair install

  I have 2 vista computers and used lot windows vista disk for the installation of repair and then active with the code from the correct disk.  Update does not work, I think it is related to the fact a repair with the bad vista disc installation (control pnel shows SP2 installed.) I do a new repair install using the correct windows disc? Update C80003FA error code and AutoCorrect cannot correct problem (States: failed). Thank you

  Hello

  If the DVD you have is Microsoft Vista DVD (retail or OEM System Builders DVD sales) that you have bought yourself that shouldn't be the problem with a repair installation, because they contain the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Information from Microsoft about this update error code points to the problems related to the Internet.

  This is where you got the Fix - It of?

  "Windows Update 80244016, 8024402f, or c80003fa error".

  http://Windows.Microsoft.com/en-us/Windows/Windows-Update-error-80244016-8024402f-c80003fa#1TC=Windows-Vista

  Another thing that you do not tell us is why you did a repair install, as this can have an impact on your current problem.

  See you soon.

• What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  I'm running an integrator system Windows 7 64 bit on an older system. What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  Original title: Windows 7 OEM System Builder

  I'm running an integrator system Windows 7 64 bit on an older system. What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  Yes, you can reinstall Windows 7 OEM System Builder License on the new hard drive with the new processor.

  It will not be a problem in this case, since you don't "move" installation, you are doing a new installation. The less it will take is activation of the phone, as you change the hard drive:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Is it possible to install the new operating system on a separate external drive?

  Currently running XP 32 Bit C: and do not want to lose all that, so I was wondering if it is possible to load 7 64 bit on a different drive (not C :) and select from F2 at startup - any advice much appreciated.)

  Cannot install Windows 7 on an external hard drive. You can create a partition in Windows XP, and then install Windows 7 on it.

  the first thing you need to do is download Easeus at the following link

  EASEUS Partition Master Home Edition - http://download.cnet.com/Easeus-Partition-Manager-Home-Edition/3000-2248_4-10863346.html

  ------------------------

  Proceed with the installation of Easeus:

  Click Next, follow the easy on-screen instructions.

  Once the installation is finished, click on finish

  Click go to the main screen

  Select the drive you want to resize in partition window

  Drag the button until you have an amount of disk space to install Windows 7 you want, and then release.

  Click on apply to apply the changes that you just made.

  Click Yes

  Click Yes

  Your computer will restart several times and changes will be made to the layout of the partition, this process is hands-free, so no interaction is required.

  ------------------

  Installation of Windows 7.

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next. (remember, it is the partition that you created previously in Windows XP.

• I just got Adobe CC on my work computer. Previously, it was possible to install the Adobe C6 also on the PC at home on the same license? Is it also possible with Adobe CC, to install the software on two machines? I work in PC environment on both computers

  I just got Adobe CC on my work computer. Previously, it was possible to install the Adobe C6 also on the PC at home on the same license? Is it also possible with Adobe CC, to install the software on two machines? I work in PC environment on both computers.

  You should check with the person who arranged the subscription to see what are the conditions for individual users.  Normally, an individual subscription license allows to have two machines with working facilities.  I don't know if the same applies to a subscription of volume / business.

• Is it possible to create the page without having to install apps on personal system

  Is it possible to create the page without having to install apps on personal system?

  Hi hankouraou,

  installation of oracle in the system applications, you can run any page of the OAF by jdeveloper. If you want to develop any stand-alone page (without oracle application), you can go to the ADF.

  Thank you
  Vandenplas.

• Not possible to deactivate CS4 - after installing CS5.5

  Hello

  Today I installed my new CS5.5 update on my Mac and now I wanted to disable and uninstall my old Suite CS4 - but it won't work.

  And Yes, I've already checked my firewall - off - but no luck.

  I tried to disable it in Photoshop, Illustrator and Flash - same problem.

  Can I now uninstall CS4 from my Mac without disabling?

  Any idea what the problem might be?

  Thank you for any suspicion

  If you follow the instructions to disable the software but is not working for some reason, then you should just contact support Adobe - they really are the only ones who can help and can manually disable the database on their end.