Is it Possible to expose a physical NIC to the guest operating system?
Hello
I use a software which needs access to a NETWORK card, but finds it difficult to find docs / previous discussions to do this, which leads me to believe, it is not possible with ESX.
Are their docs / discussions that relate to the Exhibitor / reserving a unique to a single guest OS NIC? Essentially all packages that hits this NETWORK adapter must not be manipulated by the ESX Server before reaching the guest OS (Win2k3)
Thank you
~ Jon
I thought the problem would come on the switch, but I guess it would be interesting to try something. But then if that's the case wouldn't be isolated to a single host ESX because if it was migrated anywhere else there would be two different places for this MAC address, and then if that is the case, it goes back to perhaps the box should not be virtualized so that the software work. So you go to key down to 1 host and 1 NETWORK card it might work, but I don't see how this is better than having just a physical piece of hardware.
Kyle
Tags: VMware
Similar Questions
-
Grouping of NICs in the guest operating system
We have 4 ESX servers each containing cards of 4 GB for the production traffic. These are combined to form a 4 GB pipe to the Cisco switch. Our guest VM is rc2 for windows 2008 and my problem is that I need to know if its possible to team within the virtual machine NIC windows 2008.
We have 4 NIC physical that teamed up to form 4 GB pipe to cisco switch 2008 physical windows with the same configuration of network servers
If I copy a file of 5 GB from one physical server to another physical server, it takes about 70 seconds (which is great). If I copy the file of one of the physical servers to one of my VM servers it takes longer than 3 minutes (not good).
If I copy the same file between 2 servers on the same ESX host it takes also more than 3 minutes (not good)
If my theory is right, then I think the bottleneck is the fact that my VM servers only have one NIC 1 Gb so ideally, I wish I could make team a pair of network adapters in a virtual machine and repeat the test.
Any information on how to network within the guest virtual machine team interface cards would be appreciated.
Thank you
VM NIC teaming is useless in most of the cases, in particular that. 3 minutes is equivalent to 27 MB/s, which is only 25 to 30% speed to 1 GB.
Run a pure network Guide, in your case system disk can be a bottleneck.
---
MCSA, MCTS, VCP, VMware vExpert 2009
-
People,
Hello. I use 3 Player VM and Guest OS Windows Server 2003. The host OS is Windows 7. I need to increase the size of the VM disk, so who can install several systems in the guest OS. If something bad happens during the expansion of the size of the virtual disk, the guest operating system and its Applications will not work. Thus, before expanding the size of the virtual disk, I need to back up the virtual machine hard disk external.
I have check the disk hard host operating system Windows 7, the path is C:\VirtualMachine\WindowsServer2003\... When I get to the top of the virtual machine on the external hard drive, simply select the 'VirtualMachine' folder and save automatically. I have 3 questions as follows:
First of all, if something bad happens during the expansion of the size of the virtual disk, the guest operating system and its Applications do not work. Can I just delete the folder 'VirtualMachine' in the host operating system?
Secondly, the problem of the first question does not affect files in the physical hard disk to host operating system?
Third, if something wrong happens during expand the size of the virtual disk of OS guest, I simply delete the folder 'VirtualMachine' in the host operating system and load the original 'VirtualMachine' from the external hard drive in the host operating system. Works correctly as long as one is the Virtual Machine before Stude the virtual disk size?
Thank you.
First of all, if something bad happens during the expansion of the size of the virtual disk, the guest operating system and its Applications do not work. Can I just delete the folder 'VirtualMachine' in the host operating system?
Yes.
Secondly, the problem of the first question does not affect files in the physical hard disk to host operating system?
N °
Third, if something wrong happens during expand the size of the virtual disk of OS guest, I simply delete the folder 'VirtualMachine' in the host operating system and load the original 'VirtualMachine' from the external hard drive in the host operating system. Works correctly as long as one is the Virtual Machine before Stude the virtual disk size?
Yes.
That's right, as long as you have not added and other virtual disks of different folders on the host of the virtual machine, you can probably did not.
After developing the size of the virtual disk, you must also change the size of the partition in the guest operating system.
André
-
NIC cannot start guest operating system!
Hello world
I installed vmserver 2 on vista (host OS). I created a virtual machine (win Server 2003) with a NIC birdge. but when this machine starts there is no network adapter in "network connection." In device manager there is an exclamation point on the PCI network card. When you open the properties of the nic in the concole, his writing "nic cannot start. (error code 10) »
I want just a virtual machine (win Server 2003) with a single network adapter.
Anybodey can help me?
Thank you.
Have you installed the VMware Tools?
You tryied to do a 'update driver' on the NETWORK map?
André
-
Is it possible to package to create 1 ACE containing 2 operating systems?
Previously on ACE 1, it was possible to package the two operating systems in 1 package for deployment.
I have now updated the use of ACE 2 with the administration server. However I did not understand how (or if it is possible) to package 2 operating systems in a package like I did in ACE 1.
Is it still possible?
I searched through communities etc but have not found anything on this and documentation has nothing about it either.
Treat your virtual machine exactly as you would with a physical, when configuring a system dual boot. Once you have your virtual machine created and configured to your liking, and then select the options of the ACE.
-
I'm trying to upgrade my vista to the next operating system or even 10 if possible and I can do what I need help please
Hello
There is no free upgrade Vista to 7, 8.1, or 10.
Follow these steps before you buy Windows 7.
Microsoft sells more than 7; Try Amazon.com.
Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.
If this is not available, Windows 7 will not properly work for you.
Run the "Windows 7 Upgrade Advisor.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=20
Check if your specifications are compatible for Windows 7:
"Windows 7 system requirements"
http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements
"Windows 7 Compatibility Center" for software and hardware:
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
Windows 7 upgrade paths:
http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx
«Installation and reinstallation of Windows 7»
http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7
@@@@@@@@@@@@@@@@@@@@@@@@
Follow these steps before buy you and upgrade (new installation) of Windows 8.1.
Check if the manufacturer of your computer/laptop has Windows 8.1 drivers available for your model.
If this is not available, Windows 8.1 not install and work properly for you.
There is a lot of information in this first link from Microsoft:
Download and run the Windows Upgrade Assistant 8.1 of to see if your machine is compatible Windows 8.1 and read the update for Windows 8.1: FAQ here
"Update to Windows 8.1: FAQ".
http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8
"8.1 for Windows system requirements.
http://Windows.Microsoft.com/en-us/Windows-8/system-requirements
@@@@@@@@@@@@@@@@@@@@@@@
How to buy Windows 10:
http://www.microsoftstore.com/store/msusa/en_US/cat/Windows/CategoryID.70036700
But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.
https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs
" System requirements Windows 10"
https://www.Thurrott.com/Windows/Windows-10/3884/Windows-10-system-requirements
Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015
"FAQ Windows 10.
http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ
See you soon.
-
Is it possible to install multiple copies of Windows 7 in Virtualbox as guest operating system
Hello
My laptop runs on Linux OS, I installed VirtualBox. Now, I would like to install multiple copies of Windows 7 on VirtualBox as a guest operating system.
Is this possible?
My activation will expire after 3 installations?
What are the limits in this situation?
Microsoft treats several facilities in VirtualBox (as guest operating system) as a single installation instance? I think that the hardware (motherboard) is used as a fingerprint to detect changes in the systems, but as the material is going to be the same custom installation will be treated as a single instance?
Help, please...
Thank you
one
Hello
There are not 3 installs with 1 license
A Windows license is for a single installation, and this includes in Virtual Machines.
See you soon.
-
I loaded Windows 8, which was not working properly could not recover my windows 7 has requested a second reinstall windows 7 again, but it installs only 32 bits instead of the original operating system was 32 x 64 bit is possible to redown load from microsoft and use my original key to validate thnx paul
Redownload or resume
Method 1:
When you buy Windows 8 an email with the download link and purchase details will be sent to your email address that you use to purchase / register your product, you can simply access email and use the download in link to the re - download to your computer.
Method 2:
Here are the links that will help you to download Windows 8.
Note: Please refer to option 4 in the first link below and download the correct version of second link and use the product key of windows 8.
http://Windows.Microsoft.com/en-GB/Windows-8/buy-Windows-8-online-FAQ
http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only
Hope this will help you. Please do not hesitate to meet any other assistance and we will be more than happy to help you.
-
NIC Vista guest operating system does not work
I am running VMware Workstation 5.5.5 build-56455, on a Win XP Pro host system.
I just installed Windows Vista business as a guest operating system, but I can't get the network to work.
How to make this work?
The 'real' my Dell workstation NIC is a Broadcom NetXtreme 57xx Gigabit Controller, if it is relevant at all.
Concerning
MazH
It seems that the virtual NETWORK adapter is not installed on the client, otherwise, you would see an adapter in the comments "ipconfig" with an APIPA address.
Install the VMware tools in the comments (you always do). It contains the correctdrivers for the virtual card.
AWo
VCP / VMware vEXPERT 2009
-
Hi all
For some reason, I have to disable and then enable the LAN connection in the host operating system. If some virtual machines are running during this time, connectivity all VMs for out-of-world are lost, they cannot connect to the host even more (by running the ping command). I tried a few methods to retrieve the connectivity, but all have failed, for example,
1. reboot the virtual computer
2. restart VMware Workstation
3. restart the corresponding system services in the host operating system
The only way I can retrieve all is to restart the host operating system itself.
Yes, is there short any path, I can retrieve the connectivity of these virtual machines?
Thanks in advance.
Yark
yarkwang wrote:
I use a Broadcom NetLink (TM) Gigabit Ethernet NIC, shows the date of the pilot 2006-5-15, but it works well, I think.
Try installing a newer driver. According to the site, you should be able to find a driver dated 2008 or 2007 (depending on which exact model of NetLink card you have):
- http://www.broadcom.com/support/ethernet_nic/downloaddrivers.php
1 came out of safe guard 360
Sometimes out of some firewall programs is not enough (they keep still themselves installed in the network of the host stack, even if they are 'closed'). You may need to uninstall to make sure that it is not interfere. (Search the forums for support for your firewall software see if anyone else is having problems with vmware and 360 safe guard).
-
Hello.
Is it possible to have a single account CC and programs installed on a windows computer and an apple comp together?
Yes.
Can be installed on Windows and Mac OS X (not iOS).
Using creative cloud | Creative cloud / Common Questions
"Can I use the software that I download creative cloud on more than one machine?
Yes. Creative desktop cloud applications can be downloaded and installed on multiple computers, regardless of the operating system. However, the activation is limited to two machines per person associated with membership. See the terms of use for more information. Learn how to turn off a Cloud Creative License on a machine".
-
How to tie a VM exclusively to 1 of the 4 physical NIC on the VM host?
Hey guys, I have essential Vsphere (not essential more), and I'm trying to figure out how tie/link a virtual machine running a mail server to one of the 4 network cards on the VM (Dell R510) host. I try to put/run this VM (e-mail and Web server) through my firewall DMZ port, so I would link the virtual machine to one of the network cards unused (only 2 are active by grouping network adapters).
So far, I have looked through of the "networking - > Hardware" in the configuration of the host and see all my virtual machines are under 'VM Network '. I tried to change the settings of "VM Network" to make the 3rd and 4th nic unused, but when I try a make a another network of virtual machine (VM Network 2) there automatically all NICs in it. There seems to be no way that create a network of vm with just the network cards that I want. If anyone of you knows different let me know where I was wrong, or if you know another way I should do please let me know. Thanks for your time.
You do not want to create a vDS. What you need to do is to create a second standard virtual switch with an uplink to the desired network and virtual machine port group.
André
-
Is it possible to install the new operating system on a separate external drive?
Currently running XP 32 Bit C: and do not want to lose all that, so I was wondering if it is possible to load 7 64 bit on a different drive (not C :) and select from F2 at startup - any advice much appreciated.)
Cannot install Windows 7 on an external hard drive. You can create a partition in Windows XP, and then install Windows 7 on it.
the first thing you need to do is download Easeus at the following link
EASEUS Partition Master Home Edition - http://download.cnet.com/Easeus-Partition-Manager-Home-Edition/3000-2248_4-10863346.html
------------------------
Proceed with the installation of Easeus:
Click Next, follow the easy on-screen instructions.
Once the installation is finished, click on finish
Click go to the main screen
Select the drive you want to resize in partition window
Drag the button until you have an amount of disk space to install Windows 7 you want, and then release.
Click on apply to apply the changes that you just made.
Click Yes
Click Yes
Your computer will restart several times and changes will be made to the layout of the partition, this process is hands-free, so no interaction is required.
------------------
Installation of Windows 7.
Boot from the Windows 7 DVD
Click Install now
Accept the license agreement
When the option is displayed to select a type of installation, click (Custom advanced)Select the disk partition where you want to install Windows 7 click Next. (remember, it is the partition that you created previously in Windows XP.
-
End end NIC Teaming on ESXi with redhat linux guest operating system
I'm running into a situation of lack of bandwidth for my backup server running inside the virtual machine environment. To increase bandwidth coming from a number of backup clients on my backup inside ESXi 5 server. I would like to collage x NIC 2 inside my redhat Server installation and train the grouping of NETWORK cards using Hash my ESXi host IP.
What is the feasible way to provide a 2G from end to end connection to the outside world for my redhat backup media server? or there is an inverse?
I don't think you need to add a second NETWORK card to the Redhat VM, which acts as a backup server as a single for the virtual computer NETWORK adapter can accommodate more load than 1 G.
I have a couple of Redhat with a single NIC servers. VMXNET the following example shows this ethtool sees for the NETWORK adapter on one of these Redhat servers.
[sfuller@rhel7 ~] $ sudo ethtool eth0
Settings for eth0:
Supported ports: [TP]
Supported link modes: 1000baseT/Full
Supports auto-negotiation: no
Advertised link modes: unreleased
Announced the autonegotiation: No.
Speed: 1000 Mb/s
Duplex: full
Port: Twisted pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: off
Link detected: YesWhen I run a transfer TCP (using thrulay) from one server to another, you can see that it is 2.6Gbps average on the transfer of 10 seconds.
[sfuller@rhel7 ~] $ thrulay-t10 rhel6
the local window # = 219136B; distance window = 219136B
block size # = 8192B
# Path MTU = 1500 b, MSS = 1448B
duration of test # = 10 s; statement interval = 1 s
SID, start end s, s Mbps RTT, ms: min max avg
0.000 (0) 1,000 2550,656 0,286 7.141 0,540
(0) 1,000-2,000 2421,206 0,290 20.833 0,656
(0) 2,000 3,000 2828,721 0.300 8.399 0,542
(0) 3,000 4,000 2844,359 0.298 0,541 8.061
(0) 4,000 5,000 2727,592 0,280 0,567 14.584
(0) 5,000 6,000 2072,464 0.303 0,734 202.781
6.000 (0) 7,000 2872.825 0.529 0,283 1,413
(0) 7,000-8,000 2846,425 0,287 5.918 0.535
8,000 (0) 9,000 2869.543 0,536 0,299 1,436
(0) 9,000-10,000 2841,009 0,294 0,532 12.221
(0) # 10,000 0.000 2687,479 0,280 0,566 202.781So this shows that we can get more than the throughput of 1 Gbps on a single "GE NIC" on a Redhat VM.
You will need to do is, as you mentioned, change load balancing on the host than the Redhat VM ESX runs using the road based on the hash of the IP. This will allow the Redhat VM to use more than a single teddy bear on the ESX host. You also need to several customers, including LSB of their XOR IP addresses differently, but you said you have several clients and so unless you're really unlucky with the IP addresses to clients have you should be good there.
I hope this helps and good luck.
-
Is it possible to partition C drive where I installed my operating system?
I have a size of HDD of 250 GB... all 220 GB is partitioned the disk C remaining 30 GB only belonged to another hard drive... then I tried C partitioning, it has 120 GB free when I tried partitioning, it shows only 520 MB of available space.
Hello
I suggest you to visit these links and check if it helps:
http://support.Microsoft.com/kb/309000
It will be useful.
Maybe you are looking for
-
iPad iOS 3 9.21 freezes, slow, requires reset
freezing of the iPad, slow, requires very slow reset
-
How can I disable ATS or fast voice?
When I try to call a 'hands-free' I tell Siri including the number to call, but she won't call until I chose ATS or voice. Does not say ATS or voice. If I have my earphones in why does Siri be smart enough to know that I am a voice call? Is there
-
Should I set up my iphone as new on itunes or restore information from my old iphone?
Hello I got the iphone 4 that have been saved in my itunes on my PC. I tunes has songs inside. Now I have a new iphone - iphone 6 for a few months now, and I have pictures, contacts, messages, etc. in it. I want to download music on my phone - so I p
-
HP Envy 5660: yellow triangle in the system tray
I have a yellow triangle that appears at the bottom right of my screen - in the system tray - on top of the blue question mark HP. I can't get rid of it. It's the same thing every time - there are two errors (Windows and iOS) telling me that my p
-
Windows could not complete the format
can someone help me because can not format my USB what should I to do there at - it something I can do for my USB