Is it possible to get an image created from a placeholder to behave like a normal image?

Similar Questions

• Is it possible to get the image.width BEFORE the rendered image?

  I create an Image dynamically (in ActionScript) object and adding it to a cMain (Canvas container)

  I want to add it to a x / y location relative to an existing object in the canvas, so to do I'm putting myImage.x and myImage.y before making a cMain.addChild (myImage)

  Because I want to put the image right next to "SomeObject" into the canvas, I wanted to use something like:

  myImage.x = someObject.x - myImage.width;

  The problem is that Flex does not know the width of the image.  Of course, I could specify a specific width, but I actually do for the height (ie. myImage.height = someVBox.height), so it resizes the image and draw well, but does not give me the width of it.

  According to another discussion on this forum (http://forums.adobe.com/message/137573#137573), I tried to determine the width of the image in an event.COMPLETE handler, but even when the image is finished loading, height and width are still unknown (both show as '0');  It seems that I might be able to determine size in event. MAKE, but this does not mean the image has ALREADY been added to my painting and drawing on the screen?  At this point, it's a little too late, because I need the value of the coordinate x of the image BEFORE rendering of this.

  Is there a possible way to do it? (other than images to make sure the photo editing, they are all some dimensions and then hardcode these dimensions in...)

  Have you tried

  event.currentTarget.width ?
  

• Incomplete image created from Image SQL type using cfimage

  Hello

  Has anyone experience this problem? I have a SQL 2005 database with a column in a table of type image (created from a commercial product). When use the CFIMAGE tag to create or write the image on a browser (or drive), the image is almost always truncated (see below). The image dimensions are correct, but most of the image data is missing. Here is an example:

  

  I tried using the cfsetting with a large time-out value, but it makes no difference. Almost 90% of the images created from the database are truncated like this when you create using the cfimage tag. When read or exported application original (and database) is very good. Anyone has any ideas I can try to understand this or work around the problem?

  Thank you, Joe

  That is stored in a BLOB field that I presume.

  When you work with BLOB or CLOB data, there are default settings in DSN settings that can control the amount of data is allowed to pass by the database driver.

  It's the first thing that I looked at.

• Possible to get images of dead iPhone 6s?

  Hello

  I turned off my iPhone 6 and when I went to turn the phone back on does not respond. All black screen and trying to start by pushing the power button / stop and the button "home" for long periods does not help.

  When the connection to my mac the only option I get is to restore it lose all data. I have a lot of photos and videos to the phone that are not backed up in iTunes or iCloud.

  Is it possible that I can get the images/videoes on the phone?

  Thank you

  As stated already, the answer is NO, there is no way for you to retrieve data from your phone.

  Its too late now.

• Is it possible to get the new Google "I'm not a robot" tick box captcha to use with forms of the created muse?

  Hi did anyone know if it is possible to get and to integrate the new google "I'm not a robot" tick box captcha with forms of the Muse?

  Hello Thrust2014,

  As this feature is not not available in Muse contact forms. Feel free to add this suggestion on the page of the idea of the Muse.

  Click on the link below and click on Actions > idea create .

  Ideas for features in Adobe Muse

  Kind regards

  Vivek

• It is possible to get the size of the Image file. (file size).

  Hello world

  It is possible to get the size of the Image file. (weight of the file) using java script...? or

  It is possible to get the size of the Image file from the metadata. (weight of the file) using java script...?

  Thanks in advance.

  -yajiv

  This would be because the file you were testing did not exist...

  var file = File("/c/folderName/fileName.jpg");
  if(file.exists){
      alert(file.length);
      }else{
          alert("File does not exist");
  }
  

• How to get an Image.height who created when running?

  Hello

  I create an image to the length and adding it to a control group. After that, I want to get this image width and height.

  but when I get the image like this:

  var bgImg:Image = group_createdMenu.getElementAt (imageIndex) as Image;

  bgImg.height = 0; -> don't just not the height of sources.

  I think because of the image that is not yet drawn. What can I do?

  So thank you, have a nice day.

  Hello

  without seeing your code it is difficult to assess what may be the problem, but these options can help troubleshoot/fix:

  Check group_createdMenu.getElementAt (imageIndex) is to return an image - add path (bgImg); After var bgImg:Image =--if it displays "null" then it isn't an image type (so you can't get its height)

  try to get the dimensions of the object bitmapData instead: bgImg.bitmapData.height

  or the postal code where you create the image - you load a bitmap of runtime or it generate with the code?

• Is it possible to get clip names and additional descriptions (and other metadata) in a report? The number, .xls or some other document available?

  I have about 12 tablespoons of images recorded on several projects. Each clip has a description added to it. I'm trying to find a way to search for a specific content easier. Since so much information was laboriously on slot form of description of metadata, it would be great to be able to use it. Which brings me to the question -

  Is it possible to get clip names and additional descriptions (and other metadata) in a report? The number, .xls or some other document available?

  Thank you!

  Karim.

  one way is to highlight all the media/bins in the project Panel and from the menu, export the batch list. This will create a .csv text file.

  There is also this option in another post, but do not know how it works. First Pro CC - how can I export metadata custom in Excel?

• Is it possible to sort the images by file name?

  I imported a record of 200 images in Photos for OS X (El Captain). Image files have been appointed in the order - I want them to appear in a slide show: photo_01, photo_02 etc...

  Once I imported the images - I found them all out of order - and the only options I can find in the view menu are somehow 'oldest first', 'newest first' or ' title '. Please, someone tell me I'm missing something obvious - he and not that Apple chose to omit the possibility to sort the images by name? If this is the case - I'm speechless - how is f - ing stupid!

  Sort by file name is not an option in the Photos. Albums and smart albums you yourself set can be sorted by name, date of capture, or manually.

  Sorting through the predefined albums is automatic:

  • 'Photos' display with moments and collections is sorted by date of capture and the location.
  • 'All the Photos' display is sorted by the date of the import session.
  • Other built-in smart albums are sorted by the date of capture.

  You can see the current sort order, preset, if it is grayed out in the "view > sort ' menu.

  As a workaround:

  1. If you need to want pictures to be sorted by file name, copy the name of the file in the title field. Then, create a smart album of the items and sort by title. We have posted a trick to copy the name of the file in the title field for the selected photos: Script: change the title filename without Extensionor: Script: batch change the titles of the Extension/w
  2. Or view your photo library in pictures of power.  This versatile tool lets you browse photos as a list or thumbnail while looking the other metadata under the thumbnails or displayed as list with columns selected and sorted by columns.

  You can do a lot with the free trial: download PowerPhotos here: Fat Cat Software-PowerPhotos

• 32AV933G: is it possible to access the image user mode play movies on USB

  Hello!

  Recently, I bought a 32AV933G, based on the features and was very surprised by the good image quality.

  My question: is it possible to access the image of the user mode when playing movies media player USB?
  I can't get the preset Standard, mild, film... I can't even the Menu to adjust the settings.

  I guess that's how TV has been designed. You can change this in the next Toshiba Firmware? Please, I beg you!
  Also add some features before etc, Play/Pause, the remote control.
  Perhaps using coloured Teletext keys. Just a suggestion.

  If anyone can help with this, thank you!

  > My question: is it possible to access the image of the user mode when playing movies media player USB?

  I didn t find all the details about this in the user manual.
  So I guess that's not possible.

• Qosmio G30-163: is it possible to get the HDMI by component

  Hello

  It seems that I'll be stuck with my Qosmio back to its own screen whenever I turn off my LCD TV. So what to do?
  I have a box of multiple component entry from another manufacturer. Is it possible to get the HDMI / component?

  While I listen to my signal through that?
  The only other option is for me to leave my TV in all of time...

  Hello

  Hmm, to my knowledge the HDMI / component is not possible.
  The HDMI-DVI adapter is known to me. Also the "cable DVI-component.

  In any case, I don't think that it is a large and serious issue. You can use the FN + F5 combination to toggle the display if the image switches to the internal display of the laptop!

  Best regards

  Goodbye ;)

• I bought Lenovo G550, 6 months before and now I m is problem with key product of Windows because of the striped top, so please tell me how it would be possible to get this product key

  I bought Lenovo G550, 6 months before and now I got problems with my PC and have problem with the Windows product key due to scratch on it, so please tell me how it would be possible to get this product key.

  Behind my laptop, here is a sticker mentioned
  Proof of license
  Certificate of authenticity
  Microsoft
  Microsoft Corporation @2005
  X 15-53803
  and on the bar code is mentioned after the number.
  00.94 - 893-397-158
  Product key. M... 62-8GX88-69-... - f7b

  Hello BHASKARPIYA,

  Product Key Finder programs, if someone advises to use, is found only on your operating system preinstalled a Levono multiple factory facilities and will be of no use in these circumstances.

  You will need to contact Lenovo and request their assistance.

  Or a way around this is to buy a Lenovo recovery DVD to reinstall the operating system or use the built-in recovery Partition containing an image of your OS and reinstall Windows like that.

  No method requires a product key to be entered by you.

• Is it still possible to get the 64-bit Windows Vista support?

  Hello!

  Well, I have a copy to authentic detail, under license of Windows Vista Edition Home Premium. He put 32 bit media. But at the time when Vista comes out, I could order the 64-bit Vista Home Premium support which I use today with the same license key that came on the parcel.
  About a year ago I bought the Windows Vista Express upgrade, which is valid for a Home Premium to Ultimate upgrade. But the disk is 32-bit only! So, I was wondering if it is still possible to get the 64-bit separately, support only this time, for the edition of Vista Ultimate? I ask this question because I would like to upgrade to Vista Ultimate, but still run on 64-bit, since I can't spend 64-bit Home Premium to Ultimate 32 - bit.
  I know that it may be too late now, given the fact that Windows 7 is already out and Windows 8 is in its phase of consumer preview now. But I am not really interested in upgrading to one of them at this stage. All I really want is just to upgrade to Vista Ultimate, but I need the 64-bit support, since I already have the license key.
  Maybe that Microsoft may allow me to download an ISO image of the Vista Ultimate 64-bit? That would be good enough for me, I don't care for the physical disc, it is not really necessary. I could get some pirate site or something like that, since I already own not one but two licenses, but I don't want that.
  Thanks in advance!

  The disks are probably non-destinee resale and this may explain the color.

  The Express Upgrade product key is specific to an upgrade from Home Premium to Ultimate.  The product key with the expedition is probably a full license key.

  > By 'Matrix Vista upgrade', you mean upgrading one bit-version to the other, like 64-bit to 32-bit or 32-64, right?

  N ° upgrade matrix tells you if an upgrade installation is allowed or a custom installation is required when moving from one edition of Windows to another.

  > Also, if I use a key Vista Home Premium that I have today to install Home Premium and then upgrade to Vista Ultimate, what happenes to my old key? The old key become invalid/replaced by the new key that I got the update? I mean where I want to go back to the old edition, I've had to go back to Vista Home Premium, I reuse this old key?

  You can use the old key to return to the old edition.  However, you can not use the key to install the old edition on a different computer.  The old key is bound to the key to upgrade.

  > "" If a user is running a 32-bit version of Windows, a user can only be upgraded to another 32-bit version: upgrade from 32 bit to 64 bit requires a clean installation. ""

  Now you are confusing a "install update" with an 'upgrade license '.  A retail upgrade license is valid to move from a 32-bit edition to a 64-bit edition, but an upgrade installation is not allowed and a custom installation is required (due to the change in the number of bits of the installation).

   
  > And now Microsoft will probably speed up the versions of Windows, with new versions coming out every two years or more, or has done.
   
  Not true.  Microsoft has been on a cycle of three years for a long time.  There is no speed upward.  Vista has been delayed for two years, when Microsoft declared a moratorium until security problems in Windows have been fixed (XP SP2 was the result).
   
  > I don't know about Windows 7. I don't know if I'll get it or wait for Windows 8. I hear a lot of misfortunes for Windows 7
   
  I don't know where you got this info.  Windows 7 is much better than Vista or XP.  Vista is the one that is panned by critics as a real dog.  Try Windows 7 and you will never look back.
   

• Is it possible to get appworld link before loading on appworld

  Hi all

  Is it possible to get the link in the app world before downloading the application?

  Same kind of thing we do for Android.

  Thank you

  Sumi Ghosh

  Yes, you can copy the ID of the newly created item

  http://appworld.blackberry.com/webstore/content/ID_OF_NEW_ITEM
  

• Is it possible to get the PIN of the device?

  Hello world

  Is it possible to get a PIN device programmatically in C++ of Cascades? I search on this forum and find that this thread is talk about it, but his response cannot help me. My code is here.

  TestGetPin::TestGetPin(bb::cascades::Application *app)
  : QObject(app)
  {
      // create scene document from main.qml asset
      // set parent to created document to ensure it exists for the whole application lifetime
      QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
  
      // create root object for the UI
      AbstractPane *root = qml->createRootObject();
      // set created root object as a scene
      app->setScene(root);
  
      getDevicePIN();
  }
  
  QString TestGetPin::getDevicePIN()
  {
      QString pin;
      deviceinfo_identifying_details_t *deviceDetails;
      if(deviceinfo_get_identifying_details(&deviceDetails) == BPS_SUCCESS) {
          int pinValue = deviceinfo_identifying_details_get_pin(deviceDetails);
          pin = QString::number(pinValue, 16);
          deviceinfo_free_identifying_details(&deviceDetails);
      }
      qDebug() << "pin: "+pin;
      return pin;
  }
  

  But the console print an empty value (only "pin:" ' ").

  If anyone knows how to get a device PIN completely. Could you post your complete code example, please? I will be grateful for your kindness.

  MAZ

  deviceinfo_identifying_details_t** deviceinfo_identifying_details = new deviceinfo_identifying_details_t*;
  int deviceinfo_get_identifying_details_result = deviceinfo_get_identifying_details(deviceinfo_identifying_details);
  if (deviceinfo_get_identifying_details_result != BPS_SUCCESS) {
      deviceinfo_free_identifying_details(deviceinfo_identifying_details);
      delete deviceinfo_identifying_details;
      return;
  }
  int pin = deviceinfo_identifying_details_get_pin(*deviceinfo_identifying_details);
  QString pinHex = QString::number(pin, 16);
  qDebug() << "pinHex: " << pinHex;
  

  This code should do :-)