Is it possible to get GMAIL to work with Windows Mail? If so, how?

Similar Questions

• Satellite A210-19Z: could not get internet to work with Windows XP installed

  Hello

  When I install Windows XP on my Satellite I can not get Internet to work

  Do I have to install drivers or so?
  Please post links to the drivers if so.

  Christian

  Of course you need readers.

  If you have connected your router with a LAN cable, then you will need to install the LAN driver. If you want to use the network WiFi WLan driver must be installed also.
  If your computer laptop doesn t supports the WLan card then the WLan driver is not required

  All the drivers (if available) XP can be downloaded from the European driver Toshiba page!

• I can't get any printer work with Windows XP too more.

  I can't get any printer to work with my computer which uses Windows XP.  I checked with the companies of the printer and it is not a driver problem.  In addition, these printers all work on other computers that use Windows XP.  In addition, they worked on my computer for years until a few weeks ago.  I have been informed by the technicians of the printer who checked my computer to verify that it was not a 'driver problem' that there is a problem of Microsoft XP. It seems that the part of XP that runs the divers feel is corrupt.  The print job will go to the print spooler, but it is never sent too the printer.  Anyone has the clues how too fix this?  Y at - it an XP patch that might do the trick?  Also, I tried a "System Restore" in several places and it was not fixed.

  Choose a printer and work to get this working.

  In the windows printers and faxes, you see a printer that is in line with a status if "ready" and are able to print a test page (right click, properties, print the Test Page). "

  If there is a jam in print job in the queue of XP, nothing will be printed until the jam is cleared.

  To clear the print queue, stop the print spooler service and delete all the jobs/print pending.
     
  You cannot delete all print jobs in the queue so that the Print Spooler Service is running.
        
  To stop the Print Spooler Service, click Start, run and enter in the box:
         
  services.msc
         
  Click OK to open the Services Applet.
         
  Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
     
  The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
     
  If the "Startup type" is not set to "Automatic", set the "Startup type" to "Automatic" If that is your desire (which now is the time to check it out).

  Do not try to start or restart the Print Spooler Service immediately.  You must remove all print jobs backed up first...
     
  Then, delete all updates pending upward and forward to printing from XP.  If they do not print before, you will need to send the to the printer again.
     
  Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
     
  C:\WINDOWS\system32\spool\PRINTERS
         
  Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs.  The folder must be empty when you are finished.
         
  Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).
     
  After the reboot, check again the Spooler Service for printing and the 'Status' column for the print spooler must be read "started."

  See if you can now print a Test Page.

  Submit new failure of print jobs.

• How can I get it to work with Windows 8 on Aspire Timeline 5810TG switchable graphics?

  
  

  Hey everybody,

  I have searched all over the Web to find a way to make the Switchable Graphics Intel working on my Aspire Timeline 5810TG with Windows 8 (64-bit).

  It's very sad because only with the Radeon 4330 working at the time of the battery of the 5810 is well below the level of Windows 7.

  I would be very grateful for any kind of suggestions!

  Thank you.

• I get the error 0x800ccc92 with Windows Mail asking for my username and password.

  The username and password I used does not work.  How can I get my username and password or implement new?

  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Link above has an easy to follow Guide to set up Windows Mail.

  Contact your ISP (Internet Service Provider).

  They offer your broad band/Dial-up connection.

  Ask them to:

  username
  password for your service account to wide band/Dial-Up with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  The above information is required to set up Windows Mail.

  ISPS are usually happy to help you set up your email account.

  See you soon.

  Mick Murphy - Microsoft partner

• is it possible to get Smartswipe to work with Firefox

  Using the latest version of Firefox, when I download Smartswipe icon will not be displayed. Have tried everything. I get a screen that says disabled because it is not compatible. Any help would be appreciated.

  Hello

  If Smartswipe is not compatible with Firefox, there is nothing we can do here. Keep the extension update for future versions of Firefox is their responsibility.
  
  Can you give me the link to the extension that I can't find?

• How can I get audio to work with Windows 7?

  I just reinstalled by copy of first 4 Elements in a new machine running Windows 7. There is no sound when I play the old avi with sound files or if I capture new video with sound. How can I fix?

  Running Windows 7 64 bit in mode 32-bit will probably not solve the problem. Windows 7 automatically slides when even in 32-bit compatibility mode when you run 32-bit programs. The biggest problem is that if your 64-bit audio drivers are compatible with the program.

  Then all first, make sure you have the latest audio drivers. If your computer uses the RealTek drivers, visit the RealTek website and get the latest series of pilot hi-def audio.

  When this is done, we will focus only on the DV - AVI captured from your miniDV via FireWire. Your other reviews may have other issues. You say you can play them in Media Player and they sound but in Premiere Elements they do not?

  If Yes, go to the first Edition items menu and select Preferences / Audio material. Click ASIO settings button and then make sure that the ASIO settings are correct for your speaker configuration.

• How can I get Thunderbird to work with Windows 10?

  Since I installed Win 10, TB takes 2 minutes and send a msg. Also, when I click on the links in my email to go to the internet, Mediaupdate_wm41.com interrupts and tells me that I have to download a new video player. When I try to download, it is interrupted and never run window opens. Is win 10 stop this procedure?

  I have read several help solutions and tried the mode WITHOUT FAILURE, but nothing has been set. Yes, I have the latest version of tuberculosis. HELP PLEASE!

  IM afraid that it's a fake updated fake Web site. Here's

  How to remove
  

  Here is another link to How to remove 2

• How can I get FSX for work under Windows 7?

  I just loaded Windows 7 after 4 1/2 hours.  I can't get Flight Simulator x to work with Windows 7.  The program loads (very slowly) and then hang up as if it is moving in super slow motion.

  Hello rcrayton, welcome.

  Looks like possible problems with your graphics drivers. What is the brand and model of your computer?

  Let us know,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"

  The PC is running Windows 7 Starter.  I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.

  When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  Additional resources:

  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/how-to-successfully-do-and-troubleshoot-Windows/47e1943f-8255-452A-a7ad-2ae14dc974af

• How to get USB 2.0 Mini Bluetooth V2.0 EDR Dongle adapter to work with Windows 7 64 bit?

  How to get USB 2.0 Mini Bluetooth V2.0 EDR Dongle adapter to work with windows 7 64 bit?  Is it possible to download drivers or software for it for Windows 7 64-bit?     When connect my Bluetooth device it gives me the error message he said he know driver installed and does not connect.

  Bluetooth is built into Windows 7 with Microsoft included Bluetooth system.

  However, you must make sure that the USB ports work.

• How can I get FF to work with organizing Mod (for the mods used with ARE: Skyrim)? I get an error message that it cannot understand the given address.

  I am a big fan of the Elder Scrolls and uses the new 2.2.9 STEP Setup. They went to the organizer of the Mod (MO) and I can't seem to get my FF working with the mod download things part. I click on the icon "Earth", that takes me immediately to the page file Nexus Mod, but when I choose a file to download after clicking on "Download Manager" I get this error message:
  The address was not included
  Firefox doesn't know how to open this address, because one of the following protocols (nxm) is not associated with any program or is not allowed in this context.
  You may need to install additional software to open this address.

  The address when clicking "Download Manager" begins with nxm://Skyrim/mods/ the address is such because trying to download with the Manager.

  Any help will be greatly appreciated! I pulled out my hair for the last few hours trying to find a solution. I disabled Adblock, other popups blockers and activated the main address in my exception rules. It simply doesn't get it. Ugh!

  Thank you in advance!

  In order to use nxm: / / links, Nexus Mod Manager must be installed and associated with the Protocol nxm .

  • http://www.nexusmods.com/Skyrim/mods/modmanager/

  Problems with this program to third parties, please see the support forum:

  • http://forums.nexusmods.com/index.php?/forum/1413-NMM-code-development-chat

• How can I get my iPhone/iPad to work with Windows 10.

  How can I get my phone [/ iPad to work with Windows 10]

  Work what?

  Have you downloaded the latest version of iTunes on your computer?

  What exactly do you expect to achieve?

• How can I get headphones to work with phone I6

  How can I get headphones to work with phone I6

  Too bad.  I had to remove the cover of the phone to get a connection with the headset.

• Equium A60: Is it possible to get a copy of the Windows XP Home CD?

  Can someone tell me if it is possible to get a copy of the Windows XP Home CD that the recovery DVDs were made with that came with my Equium A60?

  Hi Matt

  The Toshiba Recovery CD, you can buy from the Toshiba service partner in your country.
  I don't know that it is not very expensive.
  The database with the right ASP, you will find on the page of Toshiba.

  Another possibility is to install the OS from the original Microsoft Windows, then install all the drivers needed and utilities Toshiba.
  These applications you can find on the page of the Toshiba driver.