Is it possible to get sp1, sp2 and sp3 for XP
I know it's laid before, but where can I download updates SP1, SP2 and SP3 for XP.
I have the original XP Pro install media.
I am strongly considering to put XP Pro on a Dell PC I have has no HARD drive.
I plan to do that because it's basically Win8.1 PUE!
A HUGH mistake buying a machine with Win8.1!
It is UGLY, it is INFLATED WITH CARP, it is UNDESIRABLE to the IMO.
I have need a lot of talk of "insecurity" and any future update. I can't live without them.
I can't the XP service packs of MS or where ever?
CHANGE > in fact I found the s SP just now install media.
I found the stub thing after that I downloaded. But I found no later than SP1 stub. But if the SP1 is not necessary, I can remove it. Just read somewhere that, in order to get SP3 installed, I need SP1 AND SP2.
No, to install sp3, you have sp1 OR sp2.
Yes, the news of the "System requirements" on the download page of the sp3 are vague and misleading: "Windows XP Home Edition, Windows XP Professional Edition, Windows XP Service Pack 1, Windows XP Service Pack 2."
Commas means 'or' - except the comma between the two editions and two service packs, which means 'and '. The requirements must be written (XP Home or XP Pro) AND (XP sp1) or XP sp2.
If you don't end up doing this, see the post following MS MVP PA bear first: https://groups.google.com/forum/#! msg/microsoft.public.windowsupdate/4-jCtXsbshs/HBI-0476Wj8J
Tags: Windows
Similar Questions
-
I tried to go to windows update but redirected to micrsoft support page, which offers no SP2 and SP3 for windows XP Pro, and yet I don't have a network of computers running windows XP Pro download the SPs would be a disater as it is intended for more than one PC.
It does not give the notice to go to the windows update page, but I can't get there because I do not have windows XP SP 3 installed on my pc, and even if I have it on a disc I couldn't install it anyway because SP 2 is not installed on this pc.
So this pc seems to be thrown into a sort of limbo XP, does anyone know a way I can get these much needed without breaking service packs?
The download versions below can be installed on a single computer.
Where to download the SP3 Setup file:
(The file is large but only installs the components required by your PC)
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4&displaylang=enHow to obtain the latest Windows XP (support CD or download) service pack
http://support.Microsoft.com/kb/322389Your computer must be at least level SP1 or SP2 SP3 will not be
install on XP Gold.Steps to take before you install Windows XP Service Pack 3
Recommend the steps to take before you install Windows XP Service Pack 3.
Also includes troubleshooting information.
http://support.Microsoft.com/kb/950717/en-usI would also create a "save image" of my front disc
to install SP3 just in case you have problems.
Not having any Image backup software:
Try the 'True Image' (has a 15 day trial version available)
http://www.Acronis.com/homecomputing/products/TrueImage/===========================================================================
Windows SP2 download (WindowsXP-KB835935-SP2 - ENU.exe)
http://www.Microsoft.com/downloads/en/details.aspx?FamilyID=049c9dbe-3b8e-4F30-8245-9e368d3cdb5a&DisplayLang=enJ W Stuart: http://www.pagestart.com
-
How to get the SP2 or SP3 for Windows XP
Searched everywhere and can not find SP2 or SP3 for Windows XP computer operating system - independent. Windows Update was never above listed.
Any help for this old man would be appreciated.
Thank you
Frank
Hi FARPAR69,
Please see article with some useful information:
http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
I have about 12 tablespoons of images recorded on several projects. Each clip has a description added to it. I'm trying to find a way to search for a specific content easier. Since so much information was laboriously on slot form of description of metadata, it would be great to be able to use it. Which brings me to the question -
Is it possible to get clip names and additional descriptions (and other metadata) in a report? The number, .xls or some other document available?
Thank you!
Karim.
one way is to highlight all the media/bins in the project Panel and from the menu, export the batch list. This will create a .csv text file.
There is also this option in another post, but do not know how it works. First Pro CC - how can I export metadata custom in Excel?
-
SP2 and SP3 removes my system configuration file!
This computer I'm is an entry door I think that a 2001... It has XP Professional SP1 on it... everytime I try to install the SP2 or SP3, it will restart for the installation... However if she never has to restart again I repair windows and restore it SP1... because SP2 and SP3 removes my file Config system... never heard of this and or any idea how to solve this problem?
I've done several installs complete costs and...
Make another & make the right way this time. See...
Cleaning a compromised system
http://TechNet.Microsoft.com/en-us/library/cc700813.aspxPersonal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) won't fix this!
HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307
After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:
4 steps to help protect your new computer before going online
http://www.Microsoft.com/security/pypc.aspxOther useful references include:
HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121cHOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2bTip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer: http://support.microsoft.com/kb/971029
NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (which will require WinXP SP3 must be installed).
Norton Removal Tool
FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exeMcAfee Consumer product removal tool
http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exeSee also:
Risks & benefits of P2P file sharing
http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspxMeasures to help prevent spyware
http://www.Microsoft.com/security/spyware/prevent.aspxMeasures to help prevent computer worms
http://www.Microsoft.com/security/worms/prevent.aspxAvoid fake security software!
http://www.Microsoft.com/security/antivirus/rogue.aspxIf you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads
If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Program does not work after downloading the sp2 and sp3
After spending hours and hours trying to download sp2 and sp3, I finally got to download completely successfully. for some strange reason when I try to open programs like weather bug and msn messenger they open but close immediately. How can I fix it?
See...
Help: I got hacked. Now what should I do?
http://TechNet.Microsoft.com/en-us/library/cc700813.aspxPersonal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) won't fix this!
HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307
Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:
4 steps to help protect your new computer before going online
http://www.Microsoft.com/security/pypc.aspxOther useful references include:
HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121cHOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2bTip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029
NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).
Norton Removal Tool
FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exeMcAfee Consumer product removal tool
http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exeSee also:
Measures to help prevent spyware
http://www.Microsoft.com/security/spyware/prevent.aspxMeasures to help prevent computer worms
http://www.Microsoft.com/security/worms/prevent.aspxAvoid fake security software!
http://www.Microsoft.com/security/antivirus/rogue.aspxIf these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Is it possible to get a trail of InDesign for 30 days after a subscription is exhausted?
Is it possible to get a trail of InDesign for 30 days after a subscription is exhausted?
There is no easy way on the same computer, but you can restart a try on a new (to cc) computer.
-
Hi all
When you try to use a GPO to map a drive (on xp sp2 and 3 customers) based up to membership in a group, it is not completely finished
Have created a GPO called MapDrive
-Under User Config. > Preferences > Windows settings > card reader
-Set Action = replace and it to map to \\Servername\share\%username% if the user is a member of the XYZ Group (common tab > Item-Level targeting)
What is happening, it's that the good player cards\\Servername\share\ of under file which is the user name.
To get the GPO to work that day
-Did you have to install the patch installed XP from KB943729for side extensions (CSE) Client
-J' also put a policy of waiting for connection before login (this fixes a problem of no similar mapping with the home folder that you can set the path in the user account object)
Any ideas why the drive mapping complete otherwise would not work or have a work around?
See you soon,.
Schmills
ThanksThahaseena M.
In fact, I found that it was not a problem with what I did, in fact, it worked.
What I found is when you map a drive via gpo to a subfolder, for example\\servername\share\subfolder
What is displayed is\\servername\share , but it actually be mapped directly to the subfolder. In the GPO, you can create a label for the drive, so in my case I created a StorageFor_ %username% label, which then displays the user who received the file, which is what I wanted.
My original mail can still help those who have problems with
1 folder without mapping entirely
2. the CST for HP patch is required for the mapping of the readers via GPO.
See you soon,.
Philippe
-
In the present implementation by Adobe if you need Lightroom alone, they must obtain and pay for Photoshop also which I'm not interested. Is it possible I can get only Lightroom. ? Help, please.
Just for clarity, the strict answer to your question is 'no': you can't just Lightroom for the same price as the bundle Lr/Photoshop Creative Cloud (CC).
You can buy a stand-alone license for Lightroom only - that's what Don and Elijah helped you to find - but the terms of pricing (and licenses) are entirely different from those that make up the whole of the CC.
Also note, it is likely that Lightroom 6 will come before long (although how long is not known): almost certainly, you will pay for the upgrade to Lr 6 If you are on a stand-alone license, then just 5 to 6 (7 and to...) is included in the price of the set.
-
recovery resulted in a loss of SP2 and SP3
Could not update because don't have SP2 installed but had only and SP3 before the recovery...
Hello
1. what you are trying to update?
2. how and why did you do a recovery?If you try to update the computer, then try to download and install the Service Pack 2 or 1. After you install the Service Pack 2 or 1, you will be able to install Service Pack 3. If you receive an error message during the installation of service pack 2 or 1, then please post the exact error message return. This could help us help you better.
Reference:
How to obtain the latest Windows XP service pack
http://support.Microsoft.com/kb/322389 -
Is it possible to get a list of CSEvents for the first?
CEP 6 Extension HTML Cookbook for 2015 CC · Adobe-CEP/CEP-resources Wiki · GitHub
Hello!
I'm used to doing in Photoshop and Illustrator, and the use of CSEvents extensions.
Is it possible to know which would be acceptable for first CSEvents?Thank you!
API of the organization is not based on events.
You want your extension to the body to do?
-
Cannot repair Windows XP Pro with MS. original disc This is SP2 and SP3 system level.
I moved my a new motherboard boot drive and need to clean up the mistakes. I was not able to repair or install a new system of my
original disc. I installed a 3rd party PCI to IDE 2 channel for the disk controller. There is no drive floppy or IDE interface on the new Board of Directors.
I installed the driver before moving the drive because it was the only way to get the drive to boot IDE.
It works fine except the occasional freeze on the internet. I don't know that I have a few tips in the registry or possibly missing files.
I've updated my system to a Pentium III processor i5-3550. Memory max on old Board has 512 MB and new one is now up to 4 GB with room for 32 GB.
Can I buy a new drive to install Windows XP Pro to the last level, or there at - there a way around this problem?
I have a downloaded SP3 disc that I used to update my system when SP3 was released.Create a "Slipstreamed" of integrating XP SP3 version
AutoStreamer, it is easy to use and for the most part explicit.
Create a new XP installation CD with SP3 included by slipstreaming SP3 using your CD SP2Guide auto Streamer and Download Sites:
http://www.simplyguides.NET/guides/using_autostreamer/using_autostreamer.shtml
http://fileforum.betanews.com/detail/1092632287/1Where to download SP3
(This file that will be used to created the slipstreamed CD)
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4&displaylang=enCreate a version Slip Stream of Windows XP with SP3
http://www.webtree.ca/WindowsXP/slipstream.htm (With the help of AutoStreamer)
http://www.theeldergeek.com/slipstreamed_xpsp3_cd_final.htm
http://www.winsupersite.com/showcase/xpsp3_slipstream.aspHow to create a Windows XP SP3 slipstreamed CD
http://www.PAGESTART.com/slipstreamsp3.htmlYou create the slipstreamed CD will not include specific drivers
for your motherboard, video, audio, network, etc... Those who you will be
need to download to your PC or motherboard manufacturing
Web site.J W Stuart: http://www.pagestart.com
-
Used to install Windows xp sp1, sp2 or sp3, I have tried everything
Please help I need windows xp sp2, it keeps the sp1 saying things not supported. so any suggestions?
Hi Fois5,
1. did you of recent changes on the computer?
2. What is the finished message, you receive during the installation of the service pack?
3. What is the current version of Windows XP sp1 is installed on the computer?
First check the current versions of Windows XP sp1 is installed on the computer.
1. click on start, run, type winver, and then press ENTER.
Also make sure that the computer meets the requirement to install service pack 2.
For Windows XP Service Pack 2 installation procedure
http://support.Microsoft.com/kb/875364
The space of hard disk required for Windows XP Service Pack 2
-
There is no space and firefox said I can put icons on the tool bar anywhere... it jumps at the end and I can't get anything in the middle of the page, the icons are small, and there is no option to enlarge them and add text to the icon. the tabs that look like a file folder suck. There is no option to add a toolbar or put tabs on top overall is 10 steps backward instead of an improvement... you had something very friendly with 28 and you're just screwed I will seek another browser
Hi Gary, you come earlier to the new UI design? There is an old article on how to use an add-on to restyle it as the interface classic Firefox 4-28, or even earlier. If you do not have another browser that makes you happy, please take a look: How to make the new look of Firefox as the old Firefox.
If you have no patience for the configuration of an add-on, the suite Seamonkey maybe worth a visit, as I believe it can probably import your Firefox data: http://www.seamonkey-project.org/
-
Where can I get sound driver and modem for Satellite A200 - 1 M 8 (PSAE6E)
Hi guys,.
Please tell me where I can get the sound driver and the modem for the A200 - 1 M 8 (PSAE6E). Please let me know the exact site.
Waiting for your response,
Thank you
Waqas Yousuf.
This pilot site Toshiba provides everything you want to do and you need ;)
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU
Maybe you are looking for
-
Late 2009 iMac Sierra gel &; incomplete close
Hi all I did a clean install of Sierra on my iMac late 2009, 3.60 GHz Intel Core 2 Duo, the 12 GB of RAM, a 1 TB drive, ATI graphics card. Everything seemed to happen. Now, I have two problems: 1. at least twice daily than the iMac just hangs. The mo
-
More RAM in Portege 3440CT?
Hey. I ve taken a 'old' Portege 3440 CT It s got 64 M of RAM and a 500 P3 processor. I m thinking about upgrading the RAM, but I can´t seem to know everything about what memory to buy... The model No. is PP344E-2PU82-SW if anyone needs. It s win 98 O
-
Cannot create a recovery for my Satellite A300-1BZ CD
I tried to use the Toshiba Recovery Disc Creator repeatedly and with many different brands of discs to create the recovery disk.However each time as the laptop is about to finish burning the disc, there is an error and the operation not can be comple
-
A .exe program
-
Feature does not not on Officejet 4500 Scan
I want to use the scan function on my Officejet 4500 for the first time. My OS is widows 8.1. Do I need a new driver download to get the function to start? My previous operating system was Windows 7.