Is it possible to integrate a URL link in a widget of composition, so that clicking on the image of the widget will automatically be a link to a separate page?

Similar Questions

• Is it possible to create a standard form which can be sent by email to anyone and once filled by the receiver, have a button that clicks on the receiver and the form is encrypted and attached it would open up an email to the sender and a built-in admin pa

  Is it possible to create a standard form which can be sent by email to anyone and once filled by the receiver, have a button that clicks on the receiver and the form is encrypted and attached to an e-mail to the sender and a built-in admin password it open?

  Hello Graphicsguy123,

  You can get the workflow above using the Widget feature. Here is the link for reference:

  https://helpx.Adobe.com/document-cloud/help/create-widgets.html

  -Usman

• After you enter a URL and hitting 'ENTER', nothing happens, except if I click on the arrow at the right end of the block URL.

  In the block of the URL, there is an arrow curved to the right end of the block. When I put the cursor in the block in preparation for the opening of a URL, the changes of curved arrow to a right arrow, pointing to the right. After entering the URL and pressing ENTER, nothing happens. If I click on the right arrow, I am taken to the desired site. It started to happen about 2 weeks ago. How can I solve this problem, so that when I hit the Enter key, I am taken to the desired site?

  This problem may be caused by the AVG Safe Search extension.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

  You can see on the AVG site if there is an update available.

• How can I integrate a form on my site and to set up a button "submit" for when people fill out and click Submit, the form will be sent to me in the form of attached pdf file?

  How can I integrate a form on my site and to set up a button "submit" for when people fill out and click Submit, the form will be sent to me in the form of attached pdf file?

  Thank you!

  Salvation;

  This isn't a workflow that is supported by solutions of Adobe forms at this time.

  Thank you

  Josh

• Not clickable URL link on html APLEX page

  I create a Page, the type is HTML text. I have a region with the model "reports region.
  
  In the source of the region, I have the text looks like:
  
  [td] [a herf = "http://yahoo.come"] http://yahoo.com [a] [td]
  
  
  ([] means upper and lower then sign)
  But after the execution of the page, the url link is not clickable to take me on the site. How can I solve this problem?
  
  -Denis
  
  Published by: Denis Sun on June 5, 2012 14:45

  Denis Sun wrote:
  I create a Page, the type is HTML text. I have a region with the model "reports region.

  In the source of the region, I have the text looks like:

  [td] [a herf ="http://yahoo.come'"] http://Yahoo.com [a] [td]

  ([] means upper and lower then sign)
  But after the execution of the page, the url link is not clickable to take me on the site. How can I solve this problem?

  Basic typo: you herf instead of href:

  http://yahoo.com
  

  ([] means upper and lower then sign)

  Note that the display using .

  ...\
  

  Tags means that it is not necessary.

• How can I stop the Firefox will automatically url https even when I type in http?

  The browser load websites https even when I type in http. Application of security certificates, etc. My home page is listed as http://... .but when Firefox opens to her, this is https://
  I changed information about autobar: config, but it had no effect.
  The only solution I've seen on the Internet so far is to switch to Chrome, something I'd rather not do.
  The most recent 30 Firefox running
  Thank you.

  Your homepage is http://news.google.com/ by the details of your system.

  Google recently started all switch to HTTPS, so you can view the help of Google about it.

• Link URL in BB7, BB10 devices control? (for applications based on the web)

  Context:

  -App companies (customers are members of staff)

  -App is based on the web - no hybrid or native application but a URL

  -URL is located within the company's intranet

  Question:

  Is it possible to order this URL on BB7 10 devices? For example:

  1. drag the URL as a logo on the screen of the device (like apps look)

  2 remove the URL (and related logo) from the screen of a user if needed (for example user is no longer can access web app)

  Thanks in advance!

  Leyden

  I think the feature you're looking for on BBOS's channel Push browser info to article 5 in this doc:

  http://docs.BlackBerry.com/en/developers/deliverables/12029/Push_applications_for_the_BlackBerry_Ent...

  This functionality does not exist for BlackBerry 10, so you will need to develop a shortcut app, info here (talking PlayBook but work for BlackBerry 10 devices):

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/how-to-create-a-URL-launching-AP...

• IS IT POSSIBLE TO INTEGRATE THE LINKS IN THE FILE YOU ARE WORKING ON?

  IS IT POSSIBLE TO INTEGRATE THE LINKS IN THE FILE YOU ARE WORKING ON?

  Sure. Go to the bindings panel (window > bindings). Click on the link. Go to the menu of the links Panel (top-right) and choose Embed link.

• Is it possible to have a fixed column width and a URL link?

  I'm trying what a popup link on a column in a SQL report, but also have the report column a certain width. Can I have or not however at the same time.
  
  What I did was created a SQL report, published a column and he gave a URL redirect (page in application) as usual.
  
  Fixed column width, I used:

  <div style="width:250px; height:54px; overflow:hidden" title="#Comments#">#Comments#</div>

  The formatting of column / Expression HTML
  
  And for the URL of the popup, I used:

  onclick="window.open(this.href,'_blank','resizable=0,scrollbars=0,width=650,height=300,menubar=0,location=0');return false;" title="Comments"

  On the column link / link attributes

  Hello

  It is possible that there is an error in your code - shows your snapshot & 523. -the & and the. should not be there. If you have changed to that of & APP_ID., then you don't need the & or the. but, normally, you should leave as & APP_ID. as the value for this will change when you move from dev to test for prod and Apex will automatically replace this string with the number of correct application.

  Andy

• URL links does not work in the lower left corner. Becomes blinking (between the address of link url and displayeble). Try for example push a few PHP my admin link (if the arrays are enough to bind apper in the corner at the bottom left). Fix this bug plea

  Hello world! I want to report a serious bug and very annoing.
  Go to www.kdevelop.org for example (or any other site), which has a link in the lower left corner. You will not be able to click on it! Cause firefox starts to Flash. Hard to explain what it looks like, it until I did a picture on here screenshot of a bug .
  Some examples of video too. Take a look at what comes when I want to click on the link above. video example of bug
  So try to any site you want, which has links (< a href > < /a >) if the bottom left corner. It's annoing. Is it possible to fix this? Actually this bug appeared because of the deletion status bar in firefox 4, where usually URL was exposed on the mouse on. Hope you understand my problem, sorry for my bad English. More info: System: 64-bit Linux (OpenSuSE 11.3). Firefox 4 b 12

  It looks like a problem with the theme. I see 'tooltip' in the right-hand corner in this case and not at the same position as this button.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

• How to change the url link that Slate Adobe provides when you publish your project

  Slate Adobe - I would like to change the url link that Slate Adobe provides when I publish my project... Is it possible

  Hello

  I suggest you view the query on the forum of users of slate: https://feedback.photoshop.com/photoshop_family/categories/photoshop_family_adobe_slate

  Kind regards

  Sheena

• Is it possible to have a URL custom in Captivate premium?

  Is it possible to have a URL custom in Captivate premium?

  Hi John,.

  For now, first Captivate allows you to configure only a custom subdomain that can be done by logging into your account as an administrator and then click on 'Company info' on the left column.

  Click on the 'Change' link to the right of the subdomain, and you can choose something like yourcompanyname.captivateprime.com according to availability.

  If you have a domain/specific URL available to you that you want to use to access the first, then you can set a redirect to this URL to the URL of your premium account so that all learners access to this specific URL be re-directed to the URL of your default premium account.

  Kind regards

  Sharad

• Is it possible to make a link to a specific page in an embedded Tumblr blog

  Hello. I have a Tumblr blog embedded on a site of Muse of customers. Is it possible to make a link to a specific page in the Iframe Tumblr, and have it wrapped in there Web site? I have interacted any help.

  Hey, one thing I tried, even if it is pretty kludgy.

  1. Reproduced on page of the Muse blog
  2. Copied the specific URL tumblr in the posts that I wanted to make a link to
  3. Make the iframe URL in each new page addressed to the URL of this blog post-specific tumblr.

  Just a thought since I couldn't figure out how to make the direct iframe to tumblr anchor or something similar.

• Is it possible to load a URL on stage?

  Hello

  I use CC - Action Script 3 Flash, is it possible to load a URL on the stage?

  use:

  import flash.events.MouseEvent;

  import flash.text.TextField;

  import flash.text.Font;

  import flash.text.TextFormat;

  import flash.display.Sprite;

  import flash.text. *;

  import flash.filters.BitmapFilter;

  import flash.filters.BitmapFilterQuality;

  import flash.filters.BlurFilter;

  Import 12345678910111213import;

  import flash.display.Loader;

  import flash.net.URLRequest;

  var link: URLRequest = new URLRequest ("http://simplegreen.com/");

  ADD CONTAINERS

  var containerStage: Sprite = new Sprite();

  containerStage.tabChildren = false;

  stage.addChild (containerStage);

  DATE TIMER

  var my_date: Date;

  var mon_timer: Timer = new Timer (1000); create a new timer that everysecond ticks

  var dateStyle: TextFormat = new TextFormat;

  dateStyle.color = 0xFFFFFF;

  dateStyle.size = 48;

  dateStyle.font = "myriadMm;

  dateStyle.align = 'left ';

  var myDateTextBox: TextField = new TextField;

  myDateTextBox = new TextField();

  myDateTextBox.width = 600;

  myDateTextBox.x = 70;

  myDateTextBox.y = 70;

  myDateTextBox.setTextFormat (dateStyle);

  Add to the scene;

  containerStage.addChild (myDateTextBox);

  var myTimeTextBox: TextField = new TextField;

  myTimeTextBox = new TextField();

  myTimeTextBox.width = 600;

  myTimeTextBox.x = 70;

  myTimeTextBox.y = 117;

  myTimeTextBox.setTextFormat (dateStyle);

  Add to the scene;

  containerStage.addChild (myTimeTextBox);

  my_timer.addEventListener (TimerEvent.TIMER, onTimer);

  my_timer. Start();

  MONTH AND DATE

  var months: Array = ['Jan', 'Feb', 'Mar', 'Apr', 'may', 'June', 'Jul', 'Aug', 'Seven', "Oct", "Nov", "Dec"];

  days var: Array = ["Sun", "Read", "Ma", "Wed", "Game", "Fri"];

  Text charger

  var textLoader: URLLoader = new URLLoader();

  textLoader.addEventListener (Event.COMPLETE, textLoaded);

  textLoader.load (new URLRequest("assets/phoneList.txt"));

  var ampm: String = new String();

  function onTimer (e: TimerEvent): void {}

  my_date = new Date();

  myDateTextBox.text = days [my_date.day] + "," + "" + months [my_date.month] + "" + formatF (my_date.date) + "" + my_date.fullYear;

  If (my_date.hours< 12)="">

  AMPM = "AM";

  } else {}

  AMPM = 'H ';

  }

  var hours: int = my_date.hours;

  If {(heures > 12)}

  hours-= 12;

  }

  myTimeTextBox.text = formatF (hours) + ":" + formatF (my_date.minutes) + "" + ampm.

  }

  function formatF(n:int):String {}

  var s:String = n.toString ();

  While (s.length<>

  s = « 0 » + s ;

  }

  return s;

  }

  Event listeners

  phone.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame);

  function fl_ClickToGoToAndPlayFromFrame(event: MouseEvent): void {}

  trace ("ready directory');

  }

  simpleGreen.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_2);

  function fl_ClickToGoToAndPlayFromFrame_2(event: MouseEvent): void {}

  navigateToURL (link, "_self");

  }

  videoDirectory.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_3);

  function fl_ClickToGoToAndPlayFromFrame_3(event: MouseEvent): void {}

  trace ("Video Player is ready");

  }

  function textLoaded(evt: Event): void {}

  info_txt.htmlText = textLoader.data;

  }

• Robo help 9-request to insert a URL link in the Help Guide.

  I've been asked to insert a URL link in the help guide I created.  Here is a picture of the menu using Flash generated where the link of the URL they should go:

  

  Is it possible to do this RoboHelp?

  Thank you.

  Hello

  Yippper. Just change the table of contents and insert a page there. Configure the page to point to the URL you want.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks