is it possible to manually copy on the old profile extensions?

Similar Questions

• new time machine snapshots copied to the old directory of the machine not recognized

  I had a time Capsule 2 TB which showered, and I started a new backup (a USB key) by mode Apple drive. It took me a while to return to deal with the old clichés left on my Time Capsule. I found nothing specific online to tell me how to deal with this, so I made a few decisions naïve. I've disabled the Time Machine, renamed my new store backup and copied over the old store backup on the new backup drive time Capsule. Then in a Terminal on the command line, I mvhad snapshot directories in the newly copied backup of the old backup store store renamed folder. NOTE: On this site, I learned about a Time Machine of assistance called bypasscommand, and I needed to use it to move the Flash files in the command line:

  $ sudo mv 2016-09-17-211302 /System/Library/Extensions/TMSafetyNet.kext/Contents/Helpers/bypass.

  .. /.. /Backups.BackupDB/MyMachine /

  At this point, I thought: well, now, I have all my old and new pictures in the active backup store on the local USB drive. Then I turned on the Time Machine, and the first backup failed:

  "An error occurred during the file copying. The problem may be temporary. If the problem persists, use disk utility to repair your backup disk. »

  Then I noticed that Finder shows only most original snapshots while in the Terminal, I see all snapshots using the ls command. All snapshots have the same names in fashion and the owner/group permissions. So, why don't Finder shows all snapshots and why is Time Machine unhappy?

  Given that I can't modify my own * post, here are the corrections and updates of the original:

  I had a time Capsule 2 TB which showered, and I started a new backup (a USB key) by mode Apple drive. It took me a while to return to deal with the old clichés left on my Time Capsule. I found nothing specific online to tell me how to deal with this, so I made a few decisions naïve. I've disabled the Time Machine, renamed my new store backup and copied over the old store backup on the new backup drive time Capsule. Then in a Terminal on the command line, I mvhad snapshot directories in the newly copied backup of the old backup store store renamed folder. NOTE: On this site, I learned about a Time Machine called command help work around, and I needed to use it to move the Flash files in the command line:

  $ sudo mv 2016-09-17-211302 /System/Library/Extensions/TMSafetyNet.kext/Contents/Helpers/bypass.

  .. /.. /Backups.BackupDB/MyMachine/

  At this point, I thought: well, now, I have all my old and new pictures in the active backup store on the local USB drive. Then I turned on the Time Machine, and the first backup failed:

  "An error occurred during the file copying. The problem may be temporary. If the problem persists, use disk utility to repair your backup disk. »

  Then I noticed that Finder shows only most original snapshots while in the Terminal, I see all snapshots using the ls command. All snapshots have the same names in fashion and the owner/group permissions.

  Then, I thought that the Finder was confused somehow. I turned off Time machine and ejected from the USB drive. When I plugged back it it, of course now Finder shows all snapshots. The tmutil listbackups command confirms also all snapshots. I started a new backup, but it has not yet.

• Is it possible to erase or reset the old iPhones without internet service? We have several old ones that no longer have a contract of service, then the identifier Apple cannot be authenticated.

  Is it possible to erase or reset the old iPhones without internet service? We have several old ones that no longer have a contract of service, then the identifier Apple cannot be authenticated.

  If it's the activation lock prevents you from setting them up, no..

  Without a connection to Apple and Enterprise servers, no..

• Try to move the content from the old profile to the new profile of corrupt, but do not know what are the permissions to use

  I already followed the procedure to copy the files from the old profile to the new up to a certain point, but the "destination folder access denied" message for 9 elements.  When I go to change the permissions, I don't know which ones to use.  Any help would be much appreciated.  It took to run the computer all night and part of a day to get to this day it is so slow now.  Thank you.

  Discussions were merged.

  Duplicate deleted not.

  Kindly, don't start another pursuit of the Thread, you have already running on the same problem.

  ABSG dear,

  Welcome to the MSFT support community.

  Try to start your system in safe mode and disable/uninstall the game for now. If the uninstallation of this game is everything to normal, you will need to install it again. If this is not the case, try another solution.

  Create a new user profile and delete the two accounts as there is a high risk user accounts has been corrupted. Heads up here learn more on how you can fix a damaged user profile and create a new:

  http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile

  Good luck!

• Files in default\profile are not copied to the new profile

  I get conflicting information on how to create a generic profile to use throughout my organization. Using the Profile Manager is not relevant to my situation.
  I tried placing files/folders in the directory "Default\Profile", "Browser\Default\Profile" directory, etc, and nothing is never copied into a new profile.
  Specifically, I created a custom "userChrome.css" file I want to distribute. What I've read, a chrome folder must be created in the directory xxxxxxx.default of the user and the .css file placed inside.
  What Miss me?

  Thank you.
  Eddy

  You are welcome.

  Note that some features may work only with the official version on the Mozilla site.
  Also, some features may only work with the version US (*)

• Can not NECC ProfileManager despite the Run area full path in quotation marks with - Switch Profile Manager. Try to copy the old profile to the new computer.

  Can not get ProfileManager to open, despite having followed closely RUN instructions in the HELP section, copy the old backup profile to new computer.

  This has happened

  Each time Firefox opened

  == I had to use a new computer because of the accident on the old.

  You don't need to run the Profile Manager to move your profile to a new PC, see this.
  http://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile

• Cannot open the files I copied from the old computer

  Hello, I copied a photoshop program from my old laptop to my hard drive, in order to put it on my new laptop. However I can not open it.                 I have all the individual files, but cannot click on any open my program.  Can someone help me?

  Thank you.. .yeeehaaa

  Generally, programs such as Photoshop can not be simply copied but must be "installed" on another computer.  Installation involves more than a simple copy of the files to their appropriate locations, but also set the registry values and registration of .dll files and sometimes services facility.  I recommend that you get out your original installation disk and re-install the program properly.

  HTH,
  JW

• Change hard drive - how do I reinstall Windows copy on the old drive?

  I intend to change my old hard drive to the laptop with a new one. Windows Vista comes with the old drive, how can I move to the new? Copy + paste does not work completely. Thank you!

  Hello

  There are different ways to do

  hard drive manufacturers will normally provide the cloning software to move your operating system installed from the old to the new hard disk

  Search for information on this subject on their Web site

  If you have vista business or ultimate, you can use the builtin vista complete PC Backup to move

  read the information below

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  or if you have vista home version you'll need 3rd party software

  link below is an example of this:

  http://www.Acronis.com/homecomputing/products/TrueImage/index.html

  also to put your machine how you bought:

  1. that vista is preinstalled, you should have a recovery on your old hard drive partition

  You can recovery disks to reinstall on your new hard drive

  ask the manufacturer of the machine how

  2. contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  3. or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

• Join E-mail from the old profile Windows 10 new profile Windows 10 on same PC

  First profile Windows 10 crapped out. Tech Windows created the new profile and copied everything except the hidden AppData directory. How do I send the old 10 profile Thunderberd windows to the new windows 10 Thunderberd profile?

  you copy the folder of the old folder appdata Thunderb ird to the new.

• Link new installation of thunderbird with the old profile.

  I created a new profile and stored on an external drive, there is a certain messages, I just had to reinstall win7 and do not know how to link a new installation of thunderbird with my old profile. Seems fair to get a host of issues that do nothing.

  Look at https://support.mozilla.org/en-US/kb/profiles-tb#w_how-to-find-your-profile and then go to the directory corresponding to your external drive to find your old * *.default file.
  Copy your old profile to the directory where your current profile is stored.
  See https://support.mozilla.org/en-US/kb/using-multiple-profiles to switch to your old GOLD "profiles.ini" edit profile to change the 'path' in the name of your old profile.
  Restart Thunderbird.

• How can I import passwords from the old profile?

  I had problems with my laptop (do not start) last week and I managed to save some stuff from the hard drive before reinstalling Windows. Now I'm on duty, I don't know how to import passwords from Firefox seems to have changed a little. I managed to restore my favorites, but that's all.

  Also, is there a way I can import my old browsing history?

  Thank you very much. x

  Yes, this place is not the Firefox profile folder, but the location of the folder that contains the files to create a new profile new model.

  See:

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • "Application Data" in XP/Win2K and "AppData" in Vista/Windows 7 are hidden folders.
  • http://KB.mozillazine.org/Show_hidden_files_and_folders

  Go to: Control Panel > Folder Options > "View" tab > under "Hidden files and folders", select "Show hidden files and folders".
  
  To see the file extensions for all files uncheck "Hide extensions for known file types".

  • XP: C:\Documents and Settings\ < user > < profile > \Application Data\Mozilla\Firefox\Profiles\.
  • Vista/Windows 7: C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\.

• Is it possible to go back to the old button "new tab"?

  I would like to be able to place a 'New tab' button just next door (or on) the label active current as previous versions allowed.

  I think same pre - RC versions of Firefox 4.0 did this, now I can not do this after updating to the latest version.
  (it is true that this was a while ago now, but I thought I would try to understand)

  This new tab button should appear immediately to the right of the last tab.

  You can try to use the restore default set in the window customize to see if brings back this button in the default location.

  Open the Customize via "view > toolbars > customize" or "Firefox > Options > toolbars."

  See also:

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• I have an old MacBook that is stocked with 9.6 OS I want to make a server.  Can I still get a copy of the old version of operating system server for this old MacBook?

  I want to create a network server home on my old MacBook (it can work only 9.6).  Anyone know if I can get an older version of server to work on this MB and which version would work?

  There are a few things wrong with the info you gave...

  He was never an OS 9.6. The latest version of OS 9 ever released was OS 9.2.2.

  No MacBook cannot use any version of OS 9 for any purpose. Even the first MacBook uses a processor Intel and OS 9 (any version) can not run on a platform of Imtel, as a BONE or as classic.

  *****

  The machine is perhaps a model of PowerBook? If so, it might be runing a version of OS 9.

  Please specify the machine model and the version of the OS.

• Retrieve messages from the old profile.

  I had an IMAP account with a company that I have used to work. I deleted the account in Thuderbird and they took the account on their server. Now, I have to be able to read old emails.

  Profile and all emails are on my computer and I can read the files in a text editor. It's a little heavy. Is it possible to restore the profile in my Thunderbird? The other answers to similar questions has always had the account be recreated, but I can't do that as my username and password get rejected.

  Thank you

  -Brian

  I used the ImportExportTools add-on and was able to solve the problem.

  Thank you!

• Moved again LT - installed Thunderbird - transferred the old profile file and profile.ini - install new cases of tuberculosis shows the file Structure but I can't open to display messages

  Just moved LT from a device running on Win Vista (SP2) to the new device on 8.1 Win 64 bit
  Installed last TB for this new device and registered the profiles.ini and profile data on Dorpbox
  updated the new TB software on new device - profile folder and ini loading profile file

  'C:\Users\Martin\AppData\Local\Thunderbird\Profiles '.
  'C:\Users\Martin\AppData\Roaming\Thunderbird\profiles.ini '.

  It loaded my old settings and I can now send and receive emails.
  My question is:

  In the navihgation pane, everything is like in my last LT, but if I select a folder - it only shows me the configuration page and not the list of messages in the display pane. The only way to display these message is to click with the right button on the required folder and open it in a new tab or window. Then I can see a list of messages!

  I read area online a lot to find my specific problem, but none related, please advise?

  Thank you
  HG

  The sight of my screen to help is attached.