Is it possible to receive two authentication factor on Apple Watch codes?

Similar Questions

• I would like to receive a notification on my Apple Watch and iPhone simultaneously the messages/IM; not one or the other.

  I would like to receive a notification on my Apple Watch and iPhone simultaneously the messages/IM; not one or the other.

  I understand that if my Apple Watch is unlocked (or on my wrist) incoming Message notifications will be displayed on my watch. This allows to bypass the notification on my iPhone for messages.  I would like to find a way for Message notifications to simultaneously alert me on my iPhone and Apple Watch.

  Thoughts?

  Hello

  If you disable the detection of wrist (on your iPhone, in the application of the watch, go to: Watch My > General > wrist detection), it will make all notification alerts to be delivered to both devices. However, you will not be able to benefit from features including screen Wake on wrist lift, Apple pay and one unblock after placing the watch on your wrist.

  If you want Apple to consider adding an option for notification alerts to be delivered for both devices regardless of the other settings, you can suggest here:

  https://www.Apple.com/feedback/watch.html

• Is it possible to have my iPhone 6 and Apple Watch both make a noise when it receives notifications?

  I have look under each setting and can't find anything. I work in an environment where the sound of watches is not quite enough to be heard, but my phone can be. Yes, I have a set of haptic at max too, but I want my phone to ring for notifications as well.

  Hello

  You can see that if you turn off your wrist detection (on your iPhone, in the application of the watch, go to: Watch My > General > wrist detection) it will make all notification alerts to be delivered to both devices. However, you will not then be able to benefit from features including Apple pay and one unblock after placing the watch on your wrist.

  If you want Apple to consider adding an option for notifications to be delivered for both devices regardless of the other settings (this option currently does not exist), you can suggest to Apple here:

  https://www.Apple.com/feedback/watch.html

• Two-factor for Apple ID & Outlook

  I noticed after enabling two-factor for Apple ID authentication, I can no longer access my emails through Outlook iCloud on my iPhone. I get a screen that says "enter your iCloud account in detail ', which I did, but I get a message that says"unable to connect. Please check your e-mail address and password and try again"I did several times. Then I checked my setting account by connecting to iCloud on my desktop computer and was able to connect without any problems. Someone at - experienced this problem or similar with applications that aren't Apple products, since the activation of two-factor authentication?

  If you have two factors of authentication two-step verification or enabled for your Apple ID, you cannot use your password Apple more ID to log into third-party applications. Instead, you must generate a password app specific to each third party application to use your Apple ID with-> passwords using specific - app Apple Support

• factor authentication code 2 sent to Apple Watch

  Hello. I recently implemented authentication 2F for my iTunes ACCT. Is there a way to get the code on my watch. Thank you for any response.

  C

  Hi Colleen

  Rather that the setting up of twofactors of authentication for iTunes, you have set up is:

  -Apple ID two-factor authentication, or;

  -For iTunes's two-step verification;

  Devices secured to two factor for Apple ID authentication are the iPhone, iPad, iPod touch, or Mac.

  With two-step for iTunes verification, temporary verification code can be sent to Apple via SMS devices or find my iPhone. If SMS is used, this code would be also visible on your watch.

  More information:

  For Apple ID - Apple Support two-factor authentication

  Frequently asked questions about the audit in two steps for Apple ID - Apple Support

  Audit in two stages and SMS - Apple Support

• I received two emails telling me that I had bought something in an application (which I did not), but I think that isn't Apple, even though it says it is. I did not get all of the details, what do I do next?

  Today, I received two emails claiming that I had bought something in an application but I do not have the app it says that I had bought something from. I didn't go the details because I firmly believe that email is a scam, because the email is not legitimate. What should I do next?

  Hi boltjumper, just delete the emails and report it to Apple.

  http://www.Apple.com/legal/more-resources/phishing/

• Portege M400: Is it possible to receive and make calls with the SIM card

  Is it possible to receive and make calls with the card SIM module in the Portege M400?

  I know that you can send and receive sms messeges, which, according to me, the software is not all good because you can't hold much, and you can't send to ems or mms.

  But there may be other software here?

  Hello

  What software do you mean exactly?

  As far as I know that the MobiLink was preinstalled on some units Portege M400.
  This software supports these features:
  Send and receive SMS, composition and read TEXT messages in several languages, compose and send to multiple recipients, the mobile contacts address book support, Rich edit for the launch of URL and Email using embedded addresses.

  As you can see that you can not use this software to make calls!
  And unfortunately other software does not know me :(

  With regard to the MobiLink Communications Software Suite;
  The details can be verified here:
  http://www.novatelwireless.com/products/solutions/MobiLink.html

  Greetings

• HP EliteBook 8570w: is it possible to run two monitors on a 8570w without a docking station.

  Is it possible to run two monitors on a 8570w without a docking station. Connect a monitor to the VGA port and the other to display port.

  I was able to get this to work. My 8570w has an Amd over-pants 7700, don't know if that matters. One is connected VGA other Displayport. The port monitor must have a custom resolution defined in the over-pants Control Panel. except that it works perfectly. More laptop screen no. Docking Station 2 24 inch Dell.

  And thanks for the quick reply Provost.

• Satellite L850 - is possible to connect two monitors external simultaneosly

  Hi, I have a L850-150 and I would like to know if it is possible to connect two monitors external simultaneosly, one by Hdmi and the second by Vga to enjoy an installation of three active screens (including the laptop screen). Im trying to figure out how to do without using a USB to adapter vfga or a Matrox dualhead2go.

  I want to use the outputs existing.
  Thanks in advance

  Some laptops supports a dual output: for example the Qosmio X 500 as shown here:
  http://APS2.toshiba-tro.de/KB0/TSB13033Y0000R01.htm

  But for Satellite L850 this isn t possible.
  But you can use an external device, such as Dynadock
  http://www.Toshiba.com/us/ACC-dynadock

• Is it possible to have two Skype accounts on a Windows 7 computer?

  Is it possible to have two Skype accounts on a Windows 7 computer?

  Yes.

  https://support.Skype.com/en/FAQ/FA829/how-can-i-run-multiple-Skype-accounts-at-the-same-time

• Tecra M5: Is it possible to connect two monitors?

  Hello

  Is it possible to connect two monitors the Tecra M5? Is it possible through the port replicator, perhaps by a split of dvi output or a dvi, one on the vga monitor. I want to divide between the two monitors.

  At soon now
  Iain.

  Hello

  No, it's not possible to connect two external monitors.
  If you want to split the screen, you can use the extended desktop option.
  In display properties, you will find the option to extend my desktop on this monitor. You must select the second monitor and activate this option.

• Why do I receive two copies of emails recently? It started just two weeks previously and only for the main account.

  About two weeks ago we started all of a sudden received two copies of every email coming in on the main account only.  I spoke with Cox technical support and technical support of McAfee Security Suite with no response or correction.  Help

  Go to tools | Accounts. You have the same account entered twice?

• Is it possible to have two routers on the cable line (T1?)?

  Question?

  is it possible to have two routers on the cable line (T1?)? First router was provided by the cable operator and runs @ standard speed(802.11?), while the router I want to add is a netgear product that will perform @ 2.4 GHz and 5 GHz. is it possible to do this without interfere or affect with speed of cable of the router?

  Thank you

  Rooster

  Question?

  is it possible to have two routers on the cable line (T1?)? First router was provided by the cable operator and runs @ standard speed(802.11?), while the router I want to add is a netgear product that will perform @ 2.4 GHz and 5 GHz. is it possible to do this without interfere or affect with speed of cable of the router?

  Thank you

  Rooster

  What is the router of society provided separate cable from your cable modem? If so then why not just use the Netgear router instead of the provided ISP router?

  If it is a combination cable modem/router device and you want to run the Netgear router as a wireless access point then only...

  Here is a FAQ that will help you in this...

  http://www.dslreports.com/FAQ/11233

  Basically would be configured with a LAN IP in the same range as the IP address you get from the existing cable modem/router Netgear, Netgear is connected directly on the LAN cable port existing via a LAN port modem/router, Netgear DHCP server is disabled and that you configure the single wireless SSID, type of encryption (that is to say.) WPA2 is the best and do not use WEP) and a strong key. Here is an example...

  http://sdrv.Ms/LrESP6

  When you configure the Netgear I recommend that you connect to it with an Ethernet cable if you screw up the wireless and the DHCP part you can find and recover.

• Is it possible to cascade two systems of Community trade marks?

  Hi have the following installed:

  * Manager CTS

  * CUCM

  * 1 x CTMS in South Africa

  * 1 x CTMS in Ghana

  Is it possible to cascade two systems of Community trade marks so that all devices in Ghana connects to the a Community trade mark and all appliances in South Africa to join the South African CTMS and then connect the two systems of Community trade marks between them?

  Hello.

  Yes it is possible,

  Please take a look at this link

  http://www.Cisco.com/en/us/docs/Telepresence/multipoint_switch/1_9/design/guide/nwmp_preface.html

  Marius

• Is it possible to have TWO Wordpad files open at the same time?

  It is possible to have TWO working Wordpad files open at the same time?  I tried 'cutting' nothing doesn't.  With Windows XP, it wasn't a problem...

  Thank you...

  Totally forgot the thing to-do bar, you can also a way to click on it to open a new