Is it possible to cascade two systems of Community trade marks?
Hi have the following installed:
* Manager CTS
* CUCM
* 1 x CTMS in South Africa
* 1 x CTMS in Ghana
Is it possible to cascade two systems of Community trade marks so that all devices in Ghana connects to the a Community trade mark and all appliances in South Africa to join the South African CTMS and then connect the two systems of Community trade marks between them?
Hello.
Yes it is possible,
Please take a look at this link
http://www.Cisco.com/en/us/docs/Telepresence/multipoint_switch/1_9/design/guide/nwmp_preface.html
Marius
Tags: Cisco Support
Similar Questions
-
is it possible to run both systems, such as windows xp & windows 8 on a pc
is it possible to run both systems, such as windows xp and windows 8 on a pc at the same time
Hi Susan,.
Actually run two at the same time? N ° having two installed so that you can choose which you want to run? Yes (as long as your computer can accommodate two operating systems and has appropriate and such pilots and you will understand the compatibility requirements and other rules for software application).
How to do this depends on which two average you and your hardware (you could partition the disk to dual-boot, use readers separate for dual boot or create a similar to a dual-boot configuration, if the two you choose cannot work together in a normal dual-boot or use a Virtual Machine installed on an operating system to install and run the other OS and so on). Certain combinations will be much easier than others.
So the answer is it is theoretically possible to have two (or three or more) installed, but not running at the same time - but I guess it could be argued that a Virtual Machine means in fact the two BONES are technically running - but that's just the way it seems to me since you can use only one at a time) , but may not work in your specific situation depending on your computer hardware and bios, the software you use, which specifies the operating systems you want to be able to access separately and so on. To do this, we need information much more to offer help.
I hope this helps.
Good luck!
Kosh
-
Why Apple can't do two systems? First of all, we are protected, and the other is free just like android, but in the style of the iOS and Apple needs a request so we can manage and see new products from an application and do not go on this site!
and I don't know that if Apple make a system more freely, there no need for any device on Earth but iPhone.
-
Is it possible to run two monitors on a 8570w without a docking station. Connect a monitor to the VGA port and the other to display port.
I was able to get this to work. My 8570w has an Amd over-pants 7700, don't know if that matters. One is connected VGA other Displayport. The port monitor must have a custom resolution defined in the over-pants Control Panel. except that it works perfectly. More laptop screen no. Docking Station 2 24 inch Dell.
And thanks for the quick reply Provost.
-
Satellite L850 - is possible to connect two monitors external simultaneosly
Hi, I have a L850-150 and I would like to know if it is possible to connect two monitors external simultaneosly, one by Hdmi and the second by Vga to enjoy an installation of three active screens (including the laptop screen). Im trying to figure out how to do without using a USB to adapter vfga or a Matrox dualhead2go.
I want to use the outputs existing.
Thanks in advanceSome laptops supports a dual output: for example the Qosmio X 500 as shown here:
http://APS2.toshiba-tro.de/KB0/TSB13033Y0000R01.htmBut for Satellite L850 this isn t possible.
But you can use an external device, such as Dynadock
http://www.Toshiba.com/us/ACC-dynadock -
Is it possible to have two Skype accounts on a Windows 7 computer?
Is it possible to have two Skype accounts on a Windows 7 computer?
Yes.
https://support.Skype.com/en/FAQ/FA829/how-can-i-run-multiple-Skype-accounts-at-the-same-time
-
Tecra M5: Is it possible to connect two monitors?
Hello
Is it possible to connect two monitors the Tecra M5? Is it possible through the port replicator, perhaps by a split of dvi output or a dvi, one on the vga monitor. I want to divide between the two monitors.
At soon now
Iain.Hello
No, it's not possible to connect two external monitors.
If you want to split the screen, you can use the extended desktop option.
In display properties, you will find the option to extend my desktop on this monitor. You must select the second monitor and activate this option. -
Help cascading two Linksys routers
Hi, I tried to cascade two Linksys routers, but it did not work for me. Maybe you could help us. The first (which has the connection of the cable modem) is the brand new E4200, and the second is the former WRT54GCv3.
That's how I want cascading them:
··································································· Linksys E4200 ----(wireless)----(Desktop PC)······················· gw: 192.168.1.1 ·············|--(Laptop)··························· ······|······················|--(iPad)····························· ······~······················|--(Home Server)······················ ····(PLC)·························································· ······~···························································· ······|···························································· Linksys WRT54GCv3 ················································· (Router mode|DHCP/NAT disabled) --(wireless)----(Playstation 3)···· gw: 192.168.1.2 ·····························|--(Samsung BD-C8500)· ···································································
However, the WRT54GCv3 does not receive the IP address of the DHCP E4200. I also tried to connect directly (without the PLC), even specifying a static IP address on the router second, but I got the same results.
I have to State, that I will not change the gateway IP/first router because I have a web server and game works with a static IP address and I don't want to put it temporarily offline due to adjust the network settings.
Thanks for your support!
I searched the forum for you and found your answer.
Go here for cascade two routers.
-
Is it possible to have two routers on the cable line (T1?)?
Question?
is it possible to have two routers on the cable line (T1?)? First router was provided by the cable operator and runs @ standard speed(802.11?), while the router I want to add is a netgear product that will perform @ 2.4 GHz and 5 GHz. is it possible to do this without interfere or affect with speed of cable of the router?
Thank you
Rooster
Question?
is it possible to have two routers on the cable line (T1?)? First router was provided by the cable operator and runs @ standard speed(802.11?), while the router I want to add is a netgear product that will perform @ 2.4 GHz and 5 GHz. is it possible to do this without interfere or affect with speed of cable of the router?
Thank you
Rooster
What is the router of society provided separate cable from your cable modem? If so then why not just use the Netgear router instead of the provided ISP router?
If it is a combination cable modem/router device and you want to run the Netgear router as a wireless access point then only...
Here is a FAQ that will help you in this...
http://www.dslreports.com/FAQ/11233
Basically would be configured with a LAN IP in the same range as the IP address you get from the existing cable modem/router Netgear, Netgear is connected directly on the LAN cable port existing via a LAN port modem/router, Netgear DHCP server is disabled and that you configure the single wireless SSID, type of encryption (that is to say.) WPA2 is the best and do not use WEP) and a strong key. Here is an example...
When you configure the Netgear I recommend that you connect to it with an Ethernet cable if you screw up the wireless and the DHCP part you can find and recover.
-
Is it possible to have TWO Wordpad files open at the same time?
It is possible to have TWO working Wordpad files open at the same time? I tried 'cutting' nothing doesn't. With Windows XP, it wasn't a problem...
Thank you...Totally forgot the thing to-do bar, you can also a way to click on it to open a new
-
is it possible to fill two paths opened by the pen tool and the two paths open close the other?
You should find the forum for any product it is and post your questions there.
Here is a link to a page that provides links to all of the Adobe forums...
The Forum links page: https://forums.adobe.com/welcome
-
Is it possible to use two different computers with the same adobe - ID and the same adobe license?
Hi Morten,
Yes, you can have your subscription or your license installed on two different computers with the same adobe id, however use one at a time.
Please let us know if you have any questions, more about it.
-
Is it possible to merge two distinct creative cloud for accounts of the teams?
We have recently been acquired by another company, and we each have our own creative cloud to the team accounts. Is it possible to merge two distinct creative cloud for teams accounts into a single account? Or we will have to cancel our account and recreate all the users on the new account.
Hello
You will need the account teams cancel and Add license that you want to keep and assign members.
Kind regards
Sheena
-
is it possible to buy two licenses CC photographer using the same e-mail account?
is it possible to buy two licenses CC photographer using the same e-mail account?
You can buy only one subscription to an electronic ID/address adobe which can be activated on both computers.
Kind regards
Hervé Khare
-
Is it possible to use the system of students on 2 devices
If I buy a comprehensive plan under a student account, I am able to use it on 2 devices? On my macbook and my ipad.
Please see: is it possible to use the system of students on 2 devices
(Double Post)
Maybe you are looking for
-
Safe to use Thunderbolt to load without activating the display?
I'm trying to reduce the amount of cables on my desk and want to use the Thunderbolt magsafe instead of the standard adapter of my macbook pro. But the screen itself is often not necessary (since the switch to a mac to 15 inches). When the Macbook pr
-
How can I change my att iphone 4S for the sprint network
How can I change my att iphone 4S for the sprint network
-
Apple TV 4 - cannot disable remote pairing
In aid it says disable pairing an Apple Remote, you must go to settings/remote controls and select 'Disable pairing' or hold down the left and menu buttons for 5 seconds, but one) there is no disable ' twinning ' I see and b) press and hold these but
-
Fract/Exp Numbe display Format string
I have a digital channel that has a decimal value with accuracy up to 16-digit figures. I want to convert this string to a numeric value, and I used a "Fract/Exp number necklace. In my VI I hae set: Data type: EXT (because it allows number of decimal
-
'Data Connection Refused' blackBerry smartphones turn off the notification!
Hello, I'm on sick leave for the next three months and my work doesn't pay for my phone, and I really didn't want to know how many emails are piling up in my Inbox, while I'm away, so I called AT & T today and cancelled my internet package. So, righ