Is it possible to stop the pc automatically after rendering finishes?

Similar Questions

• Hi, is it possible to restore the synchronization data after accidentally putting sync key? I still have an old key synchronization. Thank you

  Hi, is it possible to restore the data synchronized after accidentally putting synchronization key a day ago? I still have an old key synchronization. Thank you

  Sorry, when the sync key is reset data synchronization on the server are deleted.

  Your data must remain on other devices that use Sync before you reset your sync key, that data is not disabled when the sync key is reset.

  Now, if you had only a device running on this account synchronization and you reformatted this device, you have made a fatal mistake by resetting the sync key; There is no way to recover this type or user error. Sync was not designed as a media set in itself, there is no backup of data synchronization server or a way to restore a mistake as the synchronization key reset.

• Is it possible to stop the firefox to automatically restore all my tabs after accident?

  Every time my computer crashes or I have to force quit firefox, the next time that I open it, it will immediately try to open all the tabs I had open previously, causing the major slowdown and memory hogging. I have to force stop again for it to appear the normal restore tabs dialog box. Is it possible to avoid this?

  Set the browser.sessionstore.max_resumed_crashes pref to 0 on the about: config to get page the on: sessionrestore page immediately with the first reboot after a failure has occurred or the Task Manager was used for the closing of Firefox.

  • http://KB.mozillazine.org/browser.sessionstore.max_resumed_crashes

  Which allows to deselect the tabs that you do not want to reopen, but will reopen the other tabs.

  See:

  • http://KB.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
  • http://KB.mozillazine.org/browser.sessionstore.max_resumed_crashes

  See also:

  • https://wiki.Mozilla.org/Session_Restore#preferences

• Is it possible to stop the conversion through the management network?

  Our management 172.16.0.0/16 network and our production network 10.0.0.0/8

  When we try to make the P2V conversion, all traffic through the firewall that we use for routing between 2 networks, that really is not set up to deal with a lot of traffic and that is what is extremely slow conversion.

  Is it possible to get the converter to push this traffic through the network of production instead?

  the system is 3 ESXi hosts grouped in vcenter 5.5.  Is the storage on a San

  ESX expose NFC (network file copy) as a service that uses a converter to perform conversions and NFC uses the management network. As far as I know, it cannot be changed.

  There is one exception, if--if you do Linux P2V, cloning goes through the network of the virtual machine and you will not have this problem.

  I think you may have a more general with this configuration problem, as the NFC is used not only by the converter (for example, SRM, VMotion, etc...). See this: why vMotion uses the management rather than the network vMotion network?-frankdenneman.nl for something completely different, but which may sometimes cause a problem with this Setup.

  Kind regards

  Plamen

• Is it possible to stop the animation playing to a certain image of key?

  I have an animation that I'm controlling (go) in VB. I want to stop the animation at each keyframe, preferably to after effects and not VB.

  
  Sam

  Uh, why would hack you for the player? He shouts "Let me Flash, please" in every sense. Export a PNG of EI sequence, import into Flash, do al lthe script in the SWF file (including the provision for external triggers). You can't do anything in AE. Expressions are simply an internal way to animation and do not incorporate into the SWF file or any other format.

  Mylenium

• Is it possible to adjust the CPU fan after replacing the CPU - Satellite L35 - S21?

  I have a Toshiba Satellite L35-S2161. It was initially equipped with a Celeron M 410. Last weekend, I replaced the Celeron with a Pentium Core Duo T2250. Everything works fine. Now, both the Celeron and Pentium seem to run a bit hot.

  The beach of temp for both are exactly the same. Honer time between Celcius 55 to 62 degrees Celsius.

  Is it possible to set the fan to maintain a temperature between 50 to 55 degrees? If so, how?

  Check this http://aps2.toshiba-tro.de/kb0/FAQ7A01ZW0007R01.htm

  -It is uncertain whether the new processor is compatible to the system board. Integrated chipsets can take charge of their technical specifications a wide range of processors, but this does not mean that all types of CPU can be used in a mobile system for * integrated cooling systems are designed individually for each set of model in order to ensure the optimal functioning of the machine *. An incorrect CPU can cause the system to overheat and damage the internal system components.

  -In most cases, the BIOS does not work with the replaced CPU which causes a malfunction of the machine. The BIOS needs to be rewritten after each Exchange of a CPU that can only be done by an authorized Toshiba service partner.

• Get the message: it is not possible to load the user profile after Windows updates

  Original title: Windows won't let me sign after updates

  Last night when I turned off my computer I saw that he had a few updates to do let him - now it won't let me login and when I try to it says that it is not possible to load the user's profile (it's the only one)...

  Recently, I installed Office and Windows 7. My anti-virus is the one that is provided by microsoft. Help!

  Hi romanista,.

  You can read the following article and check if it helps to solve the problem:

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  http://support.Microsoft.com/kb/947215

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to connect to the Internet automatically after the restart with Linksys WAG 320n

  We have a problem with Linksys WAG 320n router that after rebooting the router it does not connect to the Internet automatically.

  instead I required to connect manually by clicking on State-> Connect.

  As previously he was showing server status DNS IP addresses, now it does not appear after connecting also.

  "" Could you let me know wheather miss me an option to automatically connect with LAN "' after reboot or anything else the cause.

  Thanks in advance.

  Thanks guys...

  After changing some settings wireless - bandwidth to value 'Standard' and MTU change, its done!

  Finally, the problem has been resolved. Now I can connect automatically when I restart the router and display the DNS IP addresses too.

  Thanks once again for most people trying to help me.

  I have another question and I would like to post separately instead of mention here.

• How to stop the job scheduler after recovery

  Hello
  
  Once I have restore the database from a cold backup of RMAN and start the database, all the tasks in the Scheduler which are due to begin. In our case, this causes a lot of questions.
  
  Is there a way to stop the Scheduler of shooting all jobs when I startup the database?
  
  Oracle 10g R1.

  OzOracle wrote:
  Hello

  Once I have restore the database from a cold backup of RMAN and start the database, all the tasks in the Scheduler which are due to begin. In our case, this causes a lot of questions.

  Is there a way to stop the Scheduler of shooting all jobs when I startup the database?

  Oracle 10g R1.

  ALTER SYSTEM SET JOB_QUEUE_PROCESSES IS 0 SCOPE = BOTH;.

• Stop the slides automatically advance to the next slide

  It seems this would be a common request, but I can't find a solution anywere.
  Captivate automatically moves to the next slide when the previous slide ends. I would like to stop and wait for the user to click on the 'Next' button on the control of playback.
  I don't want to have to add another button 'Next' to each slide. It would be redundant and time consuming. I just want to use the next button in the playback controls. How can I get each slide to stop and take a break?
  
  Is this possible?

  Can I have answered my own question, BUT I would like to know if experts here have a better way to do this...

  Solution: Add a new text button to slide 1. Empty the text on this button. Select the option to make the button "transparent". Then copy the button to the Clipboard. Select all of the slides in the project. Hit the dough.

  All the slides have now a 'hidden' object that stops them. They can click on the next button in the playback controls to move forward at the end of each slide.

• How can I stop the download automatically all videos?

  I have limited allocation of bandwidth and data, I need to be able to stop all the videos download automatically. What I like most is that any video that attempts to load any drive is stopped and I gives me the opportunity to play if I want.

  {Ctrl + Shift + A} to open the Add-ons Manager tab, then click on Plugins.
  Look at each Plugin and on the right, there is a checkbox "selector".
  Click on 'down arrow', then select Ask activation"substitution"always enable"for each Plugin that can play video files.
  
  Then restart Firefox.

• How to stop the image automatically re-sizing of a sequence

  I have a sequence CS5 as of:

  HDV 1080i and 25 f/s

  It is therefore 1440px by 1080px and the aspect ratio is 1.3333

  I have an image in the project which is 1600px x 1067px

  And when I pull on the sequence it is automatically reduce my image to the size of the sequence...

  How can I stop it this?

  Sorry if it's super simple

  Thanks, victoria

  Ah, brain lapse...

  Even if the dimensions of your HDV clip are 1440 x 1080, full frame, it is actually 1920 x 1080. So, your file 1600 x 1067 (probably with square pixels) is going to 'float' in the middle of your monitor for the program. You will have to step up or redraw your chart to be at least 1920 x 1080 with square pixels (or 1440 x 1080 with a 1.333 NORMAL) to completely fill the screen.

  Note that you cannot interpret just your 1600 x 1067 with a NORMAL 1, 333 - well, you could, but you will get stretching distortion.

• Is it possible to stop the pop-up HP update I receive every 24 hours, since I bought the computer?

  Every day a new update?

  Hello:

  You can launch the HP Update/Support Assistant program and change the time that you want to be notified of updates.

  I changed mine to weekly and changed to automatically download and install to warn me.

  I don't like the idea of this Installer updates while I work on the PC - especially BIOS where you should have all devices disconnected from the computer and updates your anti-virus is disabled.

  Paul

• Satellite A30 554: start and stop the question automatically

  After about a year of use my computer laptop (Satellite A30 554) started having problems with the starter. Quite often when I turn it on cooler starts working and the LEDs are showing that the computer is on, but the screen remains black. Sometimes, I need to turn off the PC and on a couple of times so that he can start to begin. What is the reason for this and can it be resolved?

  Once I had a problem with this computer off by itself while working, which was not caused by a virus. Some people advised me to vacuum clean :) under cooler. I did and it helped.

  The problem was supposed to be linked to the dust on the heatsink, which does not allow that it works correctly. The current problem also connectable to the cooler, or is - it a motherboard problem?

  Hello

  Generally speaking, if it starts and does even not initializing the monitor, or starts and turns off immediately, it could be the motherboard. It helps to remove each device at a time and try to start the computer. Sometimes when the parts become defective they still affect the ability to start. If, after removing all devices, that the problem persists, then your motherboard is faulty and must be replaced. Hope that fix you the problem.

• Is it possible to stop the alert on a single virtual machine?

  Hello

  We use foglight (vfoglight) for the management of virtual environments... every time a new virtual machine is added to the ESX host, it picks up all the rules applied to this region and throws events in the console if disk, cpu, memeory limits are reached, we also use netmonitor agent to alert when VM spill.  The question we have is that our operators monitor the console, but we don't want / need to have the calls recorded for test servers, etc... so, is there a simple (:)) medium flip of a switch in foglight, that doesn't mean no alerts triggered for certain systems?

  Thanks in advance

  Several options, actually.

  Easiest might be to create a service in the function Builder, include all test servers, I hope by creating a "rule to include a group of components" and then make a power failure permanently for this service in the Administration-> Setup Support & -> failure-> create a blackout at the request-> suspend alarms