Is my Radio broken LTE?

Similar Questions

• Created HTML Radio Group broken legs (version 4.1)

  I created 2 pages with a tab set to switch backwards between them.
  Page1: HTML with this as a source Region
  < input type = "radio" id = "radioTest" name = "my_name" value = "Test" checked / >
  Page2: white
  
  Please see my example here: http://apex.oracle.com/pls/apex/f?p=50607:1
  
  When I click page 2 I get an error indicating that the page you requested was not found.
  
  If I remove the "name" attribute in the option box, then it works fine. However, I would use the name attribute so that I can combine 2 radio buttons.
  
  How can I use HTML radio buttons without breaking the game tab?

  shoe wrote:
  How can I use HTML radio buttons without breaking the game tab?

  Usually form in the APEX controls must be created as elements of the pageor generated programmatically using API of API callsapex_item calls like apex_item.radiogroup in the report or the dynamic PL/SQL areas.

  Creating arbitrary name attrbuts in HTML regions like controls

  is not supported as they are not complying with the expected by APEX parameter signature.

• Broken screen on iPad mini 4

  Hello!

  I bought a mini iPad 4 LTE 64 GB November 2015 in Prague.

  I live in Ukraine starting in 2016.

  I broke the screen on the iPad, but it still worked. So in the service centre they told me it's ok just to change the screen with touch screen, but it doesn't have these spare parts without display. With the display, it cost more than $ 200, which is very expensive. I sent the iPad in Czech to try to fix here, but they have the same problem there is no authentic spare without display.

  In Ukraine, I tried up to 20 companies.

  It is not a problem to change the screen with touch screen for mini iPad 1, 2, 3. But it is a huge problem for iPad mini 4.

  I use my iPad for work, now I am without him for 2 months. And now my iPad goes to Germany to try to fix it.

  The similar problem with iPod touch 5G, I didn't want a lot of services still, but the popular answer «we are unable to change the screen, we can change iPod»

  It's very frustrating. I had 2 iPads, 2 iPods and they were all with broken at the end screens.

  And it's very expensive to change a screen, the minimum is 30% of the price of the device.

  What is your suggestion?

  PS: the service of mini 4 iPad *.

  The screen part display, glued together during Assembly at the factory of display manufacturers.  There is no glass screen for iDevice display, or in any case for re - bind another to a view even if such a glass screen existence (which he did not).

  The only way to fix these integrated displays is to replace the entire factory mounted display unit.  There is no other suggestion - if you break the screen on an iPhone or an iPad, you need to replace the whole screen unit, because they are manufactured as a single integrated device, and OEM replacements are no longer available to Apple or their suppliers of repair accredited as a single integrated replacement unit.

• iOS 9.3 day broken SIRI &amp; dictated via bluetooth in the car (VW Golf 7)

  In the earlier version, you can connect your car via bluetooth to your car, listen to music and make calls hands-free use siri and dircation with your hands-free kit. The last two are broken in the most recent update. Matching, continuous work and calls, but when I run siri there is no connection to the car created and everything that I talk about in the micro-voiture is not transmitted to the iPhone. Dictation is the same, no audio signal is transmitted.

  If someone can confirm this?

  I use an iphone 5 and an iphone 6, the two 9.3, the two do not work. The car is a VW Golf GTD of 2016 with the VW Discover Pro radio factory-installed.

  Mirza Hujdur salvation,

  I understand that you encounter some problems with the interaction of the stereo of your car with your iPhone after the most recent update. I would suggest that you try the troubleshooting steps in the following article:

  Configure CarPlay to use with your iPhone - Apple Support

  https://support.Apple.com/en-us/HT205634

  You will find also some useful information in this article:

  Get help to connect your iPhone, iPad or iPod touch with your car radio - Apple Support

  https://support.Apple.com/en-us/HT203412

  Be vigilant and thank you for visiting the communities of Apple Support.

• FM radio for iPhone 6s without WiFi/streaming etc.

  Is there a solution to this problem? The Griffin ifm works with iOS 9.2?

  Why does mijn 12 years old phone has an en radio fm very expensive iPhone does not work? I'm not getting it.

  I need help with that. I want to listen to the radio like in the good old days.

  How to do on my iPhone 6 s FM-radio free?

  Thank you!

  leentjefromdrongen wrote:

  I need help with that. I want to listen to the radio like in the good old days.

  So, really, you should buy an FM radio.

  Check the site Web of Griffin for more information on whether or not their product works with your device. I remember correctly, their customer service is very good. I don't know that they might answer your question if you contact.

  Equipment for the reception of FM signals would take a valuable space inside the phone. Apple seems to have taken the decision that more people want things like the large batteries, LTE and the FM is not worth.

  You can also send feedback to Apple here:

  http://www.Apple.com/feedback

• Atrix HD does not connect to LTE

  Hey everybody!

  I've recently upgraded to HD Atrix Saturday night and I love this phone! However, there is a minor problem, I noticed. I came from the Atrix 2 before this phone, so they had to issue a micro SIM (since I regularly used SIM card). I'm getting a signal strong and get the '4G' data (like HSPA +). However, I checked the AT & T coverage map and I'm square in the middle of a 4 G LTE coverage area. The problem is that the phone will apparently not be connect to the 4 G LTE network. Is there something that I need to change in the settings or I have to go see AT & T about it? I already checked my APN settings and they all seem to be default.

  The phone connects automatically when, in an LTE service area. I'll make sure that you have a data plan LTE and LTE-advanced base, and if you do, I would ask for a new SIM card.

  Those are the two main issues. There is no way to turn on or off the LTE on the Atrix HD radio.

  Good luck and let us know how it goes!

• Removal of noise from charge related? -E2 Bike LTE

  I use an app 3rd - party for the specific purpose of change/activation of the related fresh sounds. While it works fine when I plug my phone in & when my battery reaches 100%, the disconnection is interrupted, or rather to silence as it turns off.

  "Load-related noise removal" is the culprit? It is listed under Apps > ALL & mark features Motorola M. she may be disabled, but I prefer to avoid this. The ringtones that I use for loading are the same format as each other (mp3). They are also very short (3 seconds tops). On a previous, phone not manufactured by Motorola, all my problems w / this problem have been strangely reversed: the only function that worked there was sound due to disconnect (same file used on my Moto E2 LTE).

  Again, I would know exactly what does "Suppression of noise related to the load", & if she could be removing the app 3rd - party that provides related fresh sounds.

  AT & T
  
  Lollipop 5.1

  It was added in the 5.1 update. It does not affect the ringtones or something like that. It mutes the headphone when loading (if no app he uses). Before they add (it's really a patch), you would hear the hum of the electric system of a motor vehicle through the stereo if you charged and use the helmet as a line output to the entrance "to the" on a car radio.

  That said, it is safe to disable it to see if it is causing it to happen. If you don't connect the headphone jack on your car stereo, then you should not need anyway.

• LTE upgrade questions

  I understand that we will be able to send our Xoom to be updated to include a new mobile network radio that will work on Verizon's LTE network. However there seems to be some confusion on if you need to have already activated the Verizon 3G service to receive the free update. Can you confirm if we have activated the device first?

  My plan was to wait to turn on after I received the LTE upgrade.

  Matt from Motorola posted a thread here for LTE information and you can ask in this thread that is LTE all partners.

• Radio 3G problem

  Anyone with bad to keep a data connection, while the strength of the signal is 2 bars? Since the LTE upgrade my 3G radio is worse now as to drop the service. I have to restart my Xoom to run and then it only lasts a few minutes. I got to try 4G yesterday and it worked normally. Came home (zone Non - LTE) and 3 G to the normal disruption. This happens also in other cities. WiFi works fine, except when switch to airplane mode, then turn on wifi, it will freeze on "wifi power" requiring a reboot. Been on the phone with Verizon and I now have to wait to check out their system, prior to my xoom has a problem. I had this problem before the LTE upgrade. Now it's worse.

  Well I sent my xoom Motorola 10/18 and 10/21 with no fix got it today or no explanation back! just a waste of shipping! So, I went back to the verizon store where I bought origionally. I showed them the RAM packing list with a copy of the problem card that I had filled. Indicating the 3 g radio was defective and just wait a few minutes and he came out. The nice lady was aware of my problems before hand and since there is no units renovated into stock. She gave me a whole new xoom in Exchange. Now all is well and I'm happy! Verizon Gets an A + and Motorola warranty dept a big big ole F.

• 4G Radio for XOOM FCC approved

  Yes Darling! The Radio/upgrade to 4G on the XOOM was approved by the FCC.

  http://goo.GL/omWHW

  3.2, SD and now 4G. Day XOOM Best ever?

  Sweet news, looks like a day of stage! What will we discuss the SD card and the LTE begin to materialize?

  -Doc

• Z10 broken blackBerry torch USB - how to transfer Contacts to Z10

  Anyone know how to get contacts for the Z10 to a Torch 9860 other than Bluetooth each contact one by one?  My USB port on my old phone is broken and cannot be fixed without replacing the complete Platinum!

  I used the Blackberry Protect on my Torch 9860, and I see the back upward when I connect.  I just can not restore anything to my Z10.

  The crappy USB port on my Torch 9860 is down.  I know that, because I actually found the PIN that broke with the main circuit on the phone which, guess what, ENDS THE CIRCUIT!

  I can't believe that BlackBerry is a product where the USB is the ONLY way to transfer contacts, calendars, etc., of an older Blackberry.  Sure that someone was not thinking...  I am seriously thinking about return to the Blackberry for a brand of conviviality.  The lifeline USB with no backup copy is a VERY bad idea, and BAD planning on part of Blackberry.

  I spoke in support of Radio Shack... such a great help!

  Here's the answer (using the same SIM card to copy and transfer):

  (1) have the SIM card in the torch. Select the Setup icon on the torch

  (2) device selector

  (3) select the Option to copy the data from your SIM card and let it copy.

  (4) switch the SIM card in the Z10.  Go to the icon of installation on the Z10

  (5) device selector

  (6) select data transfer and leave it to copy.

  It takes a few minutes for the Z10 everything coming from the card SIM the Z10, but SO relieved to see come back all my stuff!

• BlackBerry 10 flipping between AT &amp; T LTE and emergency mode

  Greetings,

  I am the proud owner of a BlackBerry Z10. A few days to receive the phone, I noticed he was constantly about-face AT & T LTE and emergency mode. I couldn't make or receive calls and text messages I've sent have often received several times. Here are the steps I took to try to resolve the problem:
  1. went to the AT & T store and had a new SIM card installed
  2. a few days later, I went back because the problem persisted. They provided a replacement phone.
  3 conducted a security wipe, part way through interrupts him and performed a clean installation of a PC using link BB.
  4. called supports AT & T, who proposed to replace it with yet another phone. However, it seemed useful as I bought the original phone in Pennsylvania and he traded the first time in Texas - I don't think they would have the same 'batch' phones in geographically disparate locations.

  I'm running out of ideas on what else could be the cause and would appreciate any idea that the community here could provide!

  Thanks in advance!

  tw1701 wrote:

  Thanks for the quick response!  I had two supplementary questions:

  (1) shouldn't the phone try to "fall back" to base of 4 G or 3 G in areas without coverage instead of going into emergency mode?

  Yes, it should. But, if there is at all no cover, then SOS would be the only mode that has left him. You can always try to restart to see if this it helps find the signal. I discovered recently on mine as if I intentionally left the network radio mobile (for testing purposes) for 24 hours, then it will not re - acquire a signal the correct carrier without a reboot. Should not be the case, but it may be that the operating system continues to evolve.

  tw1701 wrote:

  (2) signal problems you describe would be specific to the device?  I have a HTC inspired (try not to laugh) and a Samsung Galaxy Note II, which worked without problems in the same places.

  Everything is possible.

  Whatever the root cause, if you got your Z10 of ATT and ATT is also your service provider, they are 100% responsible for all of your formal support. It is perhaps to dig deep, and even BlackBerry can information from you. But the only way to start any formal investigation process is by you contacting ATT to support formal and potential climbing up to BlackBerry.

  Good luck!

• Vidget broken?

  Hello, looking for assistance from someone with experience in this area please;

  I try to use a checkbox widget:

  1. I create the check box widget, add text... Choose a variable as name below.

  

  2 I create the variable for the widget (below)

  

  3 I then create my conditional action (below)

  

  4 can I create the button assign the action advanced to use the conditional action at the click.

  

  And everything should work when 'Mademoiselle' is selected right? FAKE !

  Basically as close as I can understand the "vidget" (HI HI) does not send the selected option in the check box for the real value of the conditional action. All selections return ELSE. Seems to be his broken GOLD, what have I done wrong? Same procedures worked with the rest of this project then why not here?

  ADDITIONAL:

  THIS PROCEDURE WORKS VERY WELL (works as its supposed to) SO I have to USE a RADIO BUTTON WIDGET (just tried) - so I think this vidget is corrupt/broken/bugged out!

  Thank you!

  I know, there is never support for widgets or interactions (you have inserted an interaction, widget exists always, but only for a SWF output). In the past, I was blogging about some widgets, to help.

  He should know that unlike the widget of option buttons, you must create a variable for each checkbox user! It is not possible to have a variable for different boxes. If you want to allow only one choice, use the interaction of radio buttons (or widget), where you need a variable. In this case your action (can not see the Else part) should work.

  Widget works fine, no bugs, not broken. It's just that you did not understand HOW it works.

  Lilybiri

• Questions of signals (s7 edge LTE - iPhone 7 Plus 4 G/E)

  Hey guys,.

  I know there are a lot of posts on this topic but I can't really find the one that corresponds to this...

  So I moved from s7 Edge for iPhone 7 more.  Since the switch, I have signal problems. Where, normally, I LTE 3 bars on my edge of s7, I now get 4g and E even on my iPhone 7 more. What is going on!!!  BTW, I'm on T-Mobile.

  Thank you

  Hey Greggaa,

  Thank you for being a part of the communities of Apple Support.

  If you get a poor cellular signal where you used to get full LTE signal, then it might be an update available for your iPhone carrier.  Please follow the steps in the article to check this update:

  Update the settings of your company on your iPhone or iPad

  Take care.

• iPhone 7 dead LTE in the United Kingdom

  Bought the iPhone on Apple store 7 in. I tried to find out why the 4 G/LTE does not work on the apple support unit had no alternative but to refund... Are all iPhone 7s sold to the United Kingdom having the same problem?

  Take it back to the Store where you bought it and ask them