Is Satellite A200 - 1 GB (PSAE6E) supports 4 GB of RAM

Similar Questions

• Satellite A200 - 1 M 8 supports RAM 800 Mhz?

  Hi all!
  My Toshiba A200 - 1 m 8 supports DDR2 800 Mhz RAM?
  THX in advance!

  The machine has a 800 Mhz frontsidebus, but it only supports RAM DDR2-667.

  So, you won´t have a benfit when you install faster modules.

  Sorry mate

  Have a nice weekend

• Satellite A200-1CR does not recognize the module of RAM 2 GB

  Hello

  I have a problem with the extension of the RAM.
  I have the Satellite A200-1CR with 2 x 512 MB of RAM.

  Now, I bought 1 x 2 GB RAM (DDR2 PC2-5300 (667 MHz); PA3513S-1M2G) but the BIOS and Windows recognizes only 1 GB.
  When I add 1x512mo to the second slot, the system recognizes 1.5 GB of RAM.
  Where is the problem?

  What should I do to make it see 2 GB?

  Paula

  Hello

  I think the answer is very simple.
  Satellite A200-1CR can be upgraded up to 2 GB of RAM.
  This means that you can use max 1 GB of RAM in one slot
  You used 2 GB of RAM and this module does not seem to be compatible
  In my opinion if you want to use 2 GB of RAM then you can buy 2 x 1 GB RAM modules

  Welcome them

• Re: Satellite A200-14F - how to see 4 GB of RAM?

  Ladies and gentlemen.
  There are Satellite A200-14F
  PSAECE-00500ERU
  with 1 GB of RAM

  After rising 2x2gb, it is possible to see only 3 GB of RAM

  Pls let me know what we will do to get all 4 GB

  Thank you

  Hello

  Just a few hours earlier, he had someone ask them the same question:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=53044&TSTART=0

  If it does not help, do a search on the forum, it has been discussed several times.

  Welcome them

• Satellite A200 - 1 GB does support SATA 300 HARD drive?

  I want to spend my Sat A200 - 1 GB hard disk with a 7200 RPM one... but they are all SATA300 models.
  Is this speed mode supported by the bios, motherboard and sata controller of this laptop?

  I just want to be sure that the hard drive works at its maximum speed capability and the sata and the mobo will not be a bottleneck...

  If Yes, the sata controller driver whichsis?... I want this wake in my own vista installation disc.

  Hello!

  Yes, you can use a disk with SATA300 mode but it only works in normal mode SATA no more at maximum speed. The Satellite A200 supports only SATA 1.0 mode (SATA150).

  You can use a HARD drive with 7200 RPM, this isn't a problem.

  What HARD drive capacities are supported, that you can see in the user manual. Look in Chapter 1.

  The SATA driver is in the Intel Storage Manager package.

  Good bye

• Satellite A200 PSAFCA-01H00J upgraded to 4 GB of RAM but can see only 3 GB

  Hello

  * UPGRADE RAM PROBLEMS *.

  I just upgraded my laptop from 2 GB to 4 GB of RAM, * but cannot access the 3 GB *.
  I checked all the documents, and he indicates that the laptop should be expandable to 4 GB of RAM.

  Oddly enough, the site of [mytoshiba.com.au | http://mytoshiba.com.au] does not list my exact model under "abandoned" (as if it never existed!). Although there are a number of similar models according to [http://www.mytoshiba.com.au/web/resource/pdf/discontinued-models/notebooks/satellite/satellite_a200_psafca-01k00j.pdf]

  _OTHER WINDOWS7 64 BIT PROBLEMS_

  I also added a larger HARD drive (the original HARD drive wasn't @ ~ 19 months-) as well as a fresh install of Win7 Ultimate (64-bit).

  I have the Toshiba site and updated 64-bit drivers as much as possible, including the BIOS to Mw10M520.ROM using winphlash64 downloaded on the net, the included winphlash (32 bit) of toshiba did not work as I have already installed Win7 (64).

  Incidentally, I always have problems with "Toshiba Password Utility monitoring" and the software "Driver Bluetooth software" provided by Toshiba to [http://www.mytoshiba.com.au/support/notebooks/satellite/a200/psafca-01h00j/download] - in the absence of "* Win7 64 * ' drivers I used the ' * Vista 64 *" drivers. Is this a problem?

  According to my system info:
  My Chipset is * chipsets Intel® 945 Express Chipset Family *.
  My CPU is * Intel(R) Core (TM) 2 CPU T7400 @ 2.16 GHz 2.16Ghz*
  Installed memory is * 4.00 GB (3.00 GB usable) *.
  System type is * 64-bit OS *.

  What Miss me here people? Help please :|

  Hi mate

  Please check this page of specification Intel chipsets Intel® 945 Express Chipset Support function
  http://www.Intel.com/assets/PDF/datasheet/309219.PDF

  + _1.4.2 system memory account Support_
  + Takes in charge single-channel DDR2 SDRAM only.
  + Memory maximum support 2 GB +.
  + Channel memory Topologies taken in charge: +.
  + Single channel with 1 single SO-DIMM (up to 1 GB) +.
  + Single channel with 1 SO-DIMM (up to 1 GB) and down (up to 1 GB) of memory.
  + Support for DDR2 400 MHz and 533 MHz +.

  As you can see, the Chipset Mobile Intel 945 Express charge max 2 GB of RAM. This means that 4 GB of RAM would not be taken in charge and this is perhaps the reason why only 3 GB of RAM are visible

• Satellite A200-1CR: I'd like to expand my RAM to 2 GB or 3 GB memory

  Hello.

  I have toshiba satellite a200-1cr. I'd like to expand my ram up to 2 or maybe 3 GB.

  Can anyone tell me what kind of ram I should buy, type, etc...?
  Also I don't know if I have 2 x 512 MB or 1 GB.

  I have a free slot or I have to remove one of my 512 ram?

  Thank you
  PS: I can't find my model in the toshiba Web site more... (model. psae0e No.)

  After a long investigation and after visiting various websites I found the info that this laptop was equipped with 2 x 512 MB DDR2 (667 MHz) modules

  So if you want to upgrade the RAM you can use 512 MB, 1 GB, or 2 GB modules.

  Have a look here:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=30728&ft=m&St=3

• Satellite T130-15 t does support 8 GB of RAM?

  Hi all

  I can't find this information anywhere.

  I would like to know if the motherboard t130-15 t supports 8 GB of RAM.

  Thank you!

  As far as I know the laptop supports the Chipset Mobile Intel GS40 Express and this chipset manages max 4 GB of RAM
  http://Ark.Intel.com/products/chipsets/41795

• By Satellite A200-130RV infrared device support?

  Could you please let me know wheter Toshiba Satellite A Serries have infrared device or if it can be installed?

  Hello

  I think it would be useful to know what Satellite phone you have portable computers that different because series supports different physical features.

  I'd appreciate feedback.

• Re: Satellite A200 - 1 3 (PSAE6) - VAP for Windows 7 64 bit

  I got the BIOS 2.50 - WIN64 installed and did a clean install of Windows 7 Ultimate 64 successfully. A ran Toshiba Software Installer for Windows 7 which installed the VAP and other drivers. Everything worked perfectly.

  Yesterday I updated the BIOS to version 2.60 - WIN64 and from memory card Flash not working more. Uninstalled VAP and run TSI4WIN7 and now it shows this message:
  "This device is not manufactured by Toshiba or the BIOS is not compatible with Windows 7. No update will take place. »

  Where can I get PPV for Windows 7 64? I have tryied VAP several other model but without success.

  Thank you.

  Hello

  First of all, I doubt that the BIOS update may solve the problem with your FN keys. It is only related to the value-added Package and Flash Cards Support utility.

  VAP and utility of Support of Flash Cards you can download for Windows 7 64 bit if you are looking for e.g. by Satellite L500. They have also worked for me:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• Satellite A200-PSAE4E - Win 7 support for 6-in-1 Bridge Media slot

  I recently updated my A200 PSAE4E-00T004EN for Windows 7 and since then the 6-in-1 Bridge Media slot is simply not on the machine. All suggestions on how to "Reinstall" this crack received with gratitude. See you soon

  Have you checked the Device Manager? Some unknown device listed here?

• Satellite A200-24 c (PSAE6) - display crashes when the images are zoomed

  Dear Sirs, I can't believe that there is no solution for the product that you produce. As my Toshiba I bought 14 months ago and try to fix it. I have a problem with my map displays 'ATI Mobility Radeon HD 2600' when I see photos with Windows Photo Gallery and try to enlarge... display screen will hang and go with black and red blocks!

  I tried to install all kinds of windows (XP - Vista Basic Ultimate). I tried to download all versions of catalyst for the version 6 and 9.7. So what is happening!

  Do you know that most of my friends and the people hated the Toshiba brand because of this bad reputation on the market... remember that Toshiba laptops with Nvidia graphics card doesn't have the same problem. Please please please help me!

  Your prompt response will be highly appreciated.

  Sincerely,

  Hello!

  You have installed the Catalyst 9.7 driver. Don't know that this driver doesn't have protection against overheating and could destroy your graphics card?
  I would recommend so install the latest driver of display on the Toshiba site. These drivers are pre-tested on your laptop.

  In addition, I would try to update the BIOS. AFAIK some A200 models are special BIOS available for XP and Vista version.
  Check and update the BIOS!

  Good bye

• Issue of Satellite A200 - 1 GB PSAE6 Flashcards - serial number is invalid

  Hi all.

  I need help with something for my sore head... :D

  Today, I had to turn to the zone updates and to see a newer version for the Flashcard, so I donwloaded and install, but now start problems...

  at the start of the installation it says that need to uninstall the old version, then ok I accept, then restart and exec that the flashcards program installation, but now I get error "serial number is invalid '. I come here looking for a solution and read that I have to reinstall the VAP (I had installed the version of vap-20080109135106).

  Before the error windows if poster, a DOS window opens and closes automatically with this message from command line: "connected to the ROOT\CIMV2 namespace", while the error comes: S

  Again once I uninstall the VAP, restart, clean with ccleaner, reboot, reinstall the VAP, restart, install the most recent Flashcards... surprise and... again the same error... The serial number is not valid

  I tried all the steps once again and get the error more another time.

  For the third test, I just installed the VAP and seen that the included flashcards have been installed and working... but not so easy... they don't work when you press the combination FN + Fx only works if I move the mouse over them... exactly the only combinations of work are the FN + F10 & FN + F11.

  The FN key works, because as I said before the two combinations and the green light when you press ok blinks.

  So now I have a VAP flashcards who (not upgrading) works only with the mouse or touchpad click. If I press FN + something nothing happens (except the F10 F11 keys).

  Goin whats here? I am really frustrated with this happen.

  PS: I am sure that the version of updates are just pattées portable model...
  I also tried to install version olders flashcards and PPV that I had on a backup driver cd and nothing happens, the same situation and erros... (FSCC-20080307104403 & FSCC-20070809135810)

  Please I need something :D

  Please anyone who can help?

  Post edited by: ADMIN

• Satellite A200 - 1 GB (PSAE6E) cannot find drivers for Win 7

  Guys help me :( I can't find drivers for windows 7: S

  where can I find the drivers?

  Hi mate

  Akuma is right. Because Windows 7 is finally out, you won't find Win 7 drivers.
  But as mentioned in the Toshiba page provides us with some Beta Win 7 drivers for different notebook series it s worth a try
  In addition, you can try to install Vista using Win 7 OS drivers.

  Usually, the Vista drivers (but not all) must be compatible with Win 7.

  See you soon

• Re: Satellite A200 - 1 M 4 and 4 GB of RAM

  Hi all

  I want to ask you about memory.

  I installed two (2 x OCZ2MV6672G OCZ 2 GB SO-DIMM DDR2 PC2-5400) memory modules and the system does not start. When I installed a memory module specification works perfectly. I have the latest version of the BIOS for Windows Vista 32 bit (1.80).

  Œuvres of memory because I changed position and with 2 GB RAM it s all ok but if I installed the second computer module does not start. Thank you for the responses.

  Well, I'm sure, that the maximum amount of RAM is limited to 2 GB. This should be found in the manuals too.
  What modules were built in when you bought it?

  I'm sorry to say, but maybe you can sell your ram remaining on good terms.
  Nevertheless, the OCZ memory has been a good choice.