Is satellite M30x-173 - ready for the turbo 3G communication?

Similar Questions

• Satellite A200-130 ready for the 3G?

  Is the portable special above able or is equipped with PCMCIA Type II Cardbus? This is required by the local telephone provider Ethisalat to adapt to their 3G model E620 data card that provides up to 384 Kbps?

  Hello

  As far as I know the Satellite A200-13O supports the PC card / ExpressCard slot.
  The PCMCIA location is not available!

  So, it seems that you will not be able to use the map referred to in your message!

  Sorry for this new :( Nothing to do!

  Best regards

• Satellite 4090 BIOS number - message "ready for the update BIOS... ' appears

  Hi all! Excuse my poor English because I'm french.

  A friend gives me his cell phone (a Satellite exactly 4090CDS) because he had a problem.
  In fact, the problem is that when I turn on the computer, I have a single message (not even the toshiba red logo) that is "ready for the update of the BIOS. Place the BIOS update floppy in the drive and press any key when you are ready to move forward."

  So I go to the french site of toshiba, in the BIOS download, I find that I must download this update: http://support.toshiba-tro.de/tools/bios/satellite/4030-4060-100/bios_820.zip

  OK, I download and unpack it on a floppy disk and I start the laptop with the disjette, he said that the update has been successful and it restarts automatically.
  This time, the Red toshiba logo appears, but then I have a black screen with a message:

  Bad checksum (CMOS) *.
  Check the system. Then press the [F1] key.

  And after that, I can't do anything, not even, press F1. If I restart the laptop, I myself meet once more with the first message «Ready for the update of the BIOS...» "and it's still the same.

  If someone could help me understand what the problem is, that would be fine.
  Thank you.

  Bastien.

  It sounds as if your CMOS chip has a problem. It is possible to s that the CMOS battery has failed and the BIOS settings are lost.
  Maybe the RTC battery is empty. In this case, you should connect the AC adapter to charge the battery of the CCF.
  Please note that the RTC battery (CMOS battery) can be fluffed once the main laptop battery has been recharged. In this case, the charge process may take several hours.

  But if after this long process of load this message appears again then I guess the battery is dead.
  I suggest that you only contact your ASP closest to get your phone checked.

• How rate/knowledge so ready for the Oracle Certification

  Hi, I am interested in an Oracle Certification exam (1Z0-144), but I'm not sure if I'm ready.

  Any suggestions on how I could notice me if I am ready for the examination? I have (almost) no idea on what would be the review or what topics would be covered.

  Are there sample examination questions that might similiarly appear in the review?

  appreciate your answers.

  Oracle PL/SQL (and SQL) certifications are not really related to the output of the database as are the DBA certifications. The exam 1Z0-147 was developed during the version 9i, and the exam 1Z0-144 was developed during the release of 11 g.  However, a review wins the same certification credentials (i.e. you do not become a 'Oracle 11 g PL/SQL Developer Certified Associate'.  The reason is that SQL and PL/SQL undergo massive changes from one version to the other. However, they change slightly from one version to the other, and OU must periodically update information on trial so that it matches the available capacities.  I talk about this in the article below.  It is specific for reviews of databases SQL, but the basic concepts are the same for reviews of PL/SQL.

  Preparation of Oracle Certification: Oracle SQL Fundamentals exams and database versions

  Basically However - even if you are using oracle 10g, I recommend that you take 1Z0-144, because it's a review better than 1Z0 - 147.  I give my reasoning for it the following article:

  Oracle PL/SQL Developer Certification: 1Z0-147 or 1Z0-144?

• Satellite M30x-165: OpenGL in the graphics driver is old

  Hello

  I have a Satellite M30x-165.
  I downloaded and installed the latest drivers from the page Web of Toshiba.

  When I check the version of the OpenGl driver it says that the version is 1.5.4454. Recently, I heard that this version is very old and may cause some problems with certain programs.

  The computer does not install the downloaded driver directly from ATI Web page.

  How can I update the version of OpenGL?

  Thank you well in advance.

  Greetings,
  Argonis

  Hello

  The M30X isn't the new laptop series and therefore the graphic driver seems to be not updated to the latest state
  Graphics drivers that are released in the Toshiba page are designed especially for Toshiba laptops and there is a big difference between the Toshiba and the drivers of the ATI page. So it's not easy to install the ATI drivers on laptops OS.

  But there is one thing; first of all, you can unzip the package and then you could try to update the driver through Device Manager. Here, you point to the folder decompressed driver to update the graphics driver.

  This allows you to install non-Toshiba divers would help the Toshiba notebook.

  But note; These drivers are not certified for the use of the laptop and so you can ONLY use and YOUR OWN RISK.

• Satellite M30X - no driver for network controller are available?

  After installing the new OS I tried to find a network controller driver works with Windows 7 (32 bit)
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU (product type: Archive, Satellite M30X, M series) but it seems
  Don't be at all no drivers for Windows 7.

  What can I do?

  Nothing.
  You have the old model of laptop that is designed for Windows XP Home edition and it will be not supported for Win7.
  Also, I believe that this good old classic is not supported for Vista too.

  Maybe you can do something to buy the new laptop designed for Win7. ;)

• Need drivers for Satellite A100-110 (PSAA9N) for the 64 bit OS?

  Hi, if someone can help me, a lot of tanks!

  I want drivers for my Satellite A100-110 (100-PSAA9N) new, but for 64-bit operating systems!

  To Toshiba support there are drivers for 32-bit versions, but there is no drivers for the 64 bit version of windows Vista and Windows XP x 64 edition. I can't find it!
  Mainly, I want video drivers for my nVidia GeForce Go 7300 graphics card, but for 64-bit operating systems! (Or in the nVidia support!)

  Thank you very much!!

  64-bit drivers are not available, and why you can't find them. At present, no one can say with certainty when the drivers will be available. :(

• Satellite L350 - access code for the router

  Dear Sirs

  I have a Toshiba Satellite L350 under Windows 7 Ultimate. For the first 5 months, he remembered the wireless to the router access code. I then installed a BT Home Hub which I subsequently removed and then the Windows 7 machine will remember is no longer the password.

  I spent hours on the phone with Microsoft without success. Can anyone help?

  Hi Peter Kellard,.

  For the moment I put t understand your problem.

  What happens if you enter the WLAN (access code) key again? Can you connect?
  You could save it again ;)

• Satellite A100-499 - function for the WiFi button does not work

  Hello, I have a Toshiba Satellite A100 - 499 PSAA9E.

  I formatted my laptop and installed XP with SP3. I downloaded and installed the drivers (in the right order) for this OS of the toshiba - Europe.com and everything is going well except Fn + F8. It is assumed that this combination has toggle Wifi & Bluetooth. When I switch side 'off' position and I press the keys, appears a message saying that I should switch to position 'on' but when I switch lateral position 'on' and I press Fn + F8 it does nothing.

  If I want to disable the wi - fi I have to do it with other methods: the function key does not work correctly.

  Any clue?
  Thanks for the advice (and sorry for my English).

  When the WLAN switch is on orange LED is also on?
  You can scan area available networks?
  Have you tried to use the WLAN without using FN + F8?

• Satellite A60-173 disorder during the installation of the new bios

  I have a laptop A60-173 and it does not work well. I tried to update my bios to the latest version (which I downloaded from the Toshiba home site). But it took too long to write a new bios (1 hour), then I thought that the program is not responding and I did a stupid thing I turned off the power. Now, the dead laptop, no light, no thing happends on my computer when I turn it on. What should I do? I wonder if PCservice (of the store I bought my laptop) can help me to fix it.

  IM worried so fight it

  Hello

  Can you please tell me what was the reason for the update of the BIOS? Have you had problems with your laptop? Have you read update BIOS Toshiba Description before continuing?

  Like you said it was very stupid that you stopped the update of the BIOS. It is possible that you damaged the chip for the BIOS on the main map. Sorry, but the best solution is to contact the authorized Service partner and let them check it.

• Satellite M30X - high use of the hard drive

  Once the connection in Windows XP (SP2), my computer toshiba laptop is very slow. The hard drive light is permanently on during 5 minutes. I looked in the Task Manager, but the CPU usage is low and RAM usage is low. There is no program which seems to use a lot of CPU or RAM.

  I actually disabled the pagefile to see if problems due to intensive use of the paging to the HARD disk file, but the problem persists. The laptop model is Satellite M30X-113.
  I don't know if it's related, but this problem is posed at the time that I have subscribed to a 256 MB RAM module and installed a 512 MB (making the total RAM 1024 MB).

  Did you buy compatible RAM module recommended by Toshiba (high quality product) or some piece of cheap hardware?

  By the way: have you also tried to wipe the HARD drive using the cleaning disc or as option Defragmenter?

• Satellite A60-142: Tips for the new laptop

  Hi all

  I think to buy a new laptop.
  I currently have a Satellite A60-142 and I only am not too thrilled about this model since the fan makes me crazy... It is constantly running and compared to my old laptop (Satellite 1410-304), it makes a lot of noise...

  So, I want to get a new laptop which is quieter...
  I need basically for email/surfing/Online games/digital still camera.

  Thanks for the tips!
  Ellen

  Hi Ellen

  Well, it is a known issue that, often, the fan works. If you play games or use other applications, the laptop works at high performance and the parts of the device as the processor or graphics card produce a lot of heat. In this case, aeration run also at high speed. It is a simple fact.
  As far as I know, you can try to change the settings of cooling in the power utility.
  In addition it is not easy to say which model of laptop runs more quiet. In the notebooks of high performance fans are bigger and louder by contrast office books are ineffective but easier to cool.

  It's not easy to make a choice

  Good bye

• Satellite L40 - need driver for the modem on high definition audio bus device

  Hey there!

  I have a little problem with my Satellite L40-143 (Modell Nr.: PSL40E-04E00LGR).
  I changed from Windows Vista to Windows XP Professional and found that all need drivers, except a "device on high definition audio bus modem.
  The drivers I found on the Toshiba page don't work anymore.

  I would be very grateful for all the good ideas.

  Thank you ^ ^

  Sayo

  Laughing out loud. Hey Buddy what s the problem
  You have no sound on your laptop or you cannot burn a CD with your CD/DVD drive?

  The fact is that DON T need all the drivers for the CD/DVD drive. The operating system uses Microsoft own driver!
  If you want to burn media, you must install a burning like Nero for example software!

  Good bye

• Ready for the opening of Photos (I think).

  OK I think I'm ready to give up the opening and move to the Photos.  Should I do this?
  I thought that when I saw that DXO are now available on the app store as a plug-in for the Photos.  Has anyone used this yet?  It will bring pictures until it can make opening?  I won't be able to do in the Photos I can do in Aperture?  I know these are probably questions that have been asked over and over - I'm sorry.  If I am to make the change, I guess that I've upgraded to El Capitan and Photos of enforcement will be there and there will be an easy way to move the Aperture library and my library of iPhotos in Photos?  I think anyone can help me with this.  I have an imac with 10.9.5.

  David

  None of my camera RAW formats is supported in DXO, so I was not even looking at it.    http://www.DxO.com/us/photography/photo-software/DxO-opticspro/supported-cameras

  Take a look at what may make the extension of DXO photo:

  https://iTunes.Apple.com/us/app/DxO-opticspro-for-photos/id1056077392?MT=12

  It will improve in photo RAW development:

  The extension is able to apply optical corrections, White Balance correction, DxO Lighting Smart, FIRST denoising and mist removal DxO ClearView, in a completely new user interface that is intuitive, simple and clean.

  One-click fixes for RAW images:

  • Corrections by default include the Smart lens, White Balance, DxO Lighting Corrections, noise suppression

  • Toggle to see the before/after the benefits

  • Choose faster (HQ) or better a (FIRST) Denoise correction

  • Use the magnification loupe to get a glimpse of the FIRST denoising

  • Default restore with one click fixes

  One click ClearView DxO for RAW images:

  • Immediately remove the mist and the smog of landscape photos

  • The choice between different levels of intensity with a single click

  But I have yet to find an extension that can replace brushed adjustments Aperture to photo editing.

  Photos does not yet offer a lot of control over the design of the library and the support of metadata is still poor.

  I use it mainly to keep a selection of my photos in iCloud and synchronized across all of my Macs.

• When installing a windows 8, it gets stuck at 82% in «get files ready for the plant» and btw, this is a clean install. Help me

  I did a clean install of Windows 8 in my Emachines D730z. But he's stuck at 82% in "Getting files ready for installation. Help

  My installation 8.1 is also stuck at 82%. I let the installation continues and about an hour later, he was able to exceed 82% and complete the installation.