IS the UUID and device ID is the same?
Dear team,
Ask you to help me with the following queries?
Q1:-UUID and device Id is the same?
Q2:-peripheral Id comes from storage array to a LUN?
Q3:-is the UUID provided by an ESX Server, then this ESX Server to identify this LUN?
Q4 :-UUID is also called or refers signature ESX?
Concerning
Mr. VMware.
Hello
in general, the signature should not change in a scenario you desrcibed.
The ESX host allows you to create a data store VMFS on this LUN collects information provided by the table.
This information will be used to generate a signature (the process itself is still not published by VMware).
The signature itself is stored in the VMFS data store and is always used when the Renumeriser SCSI operations.
Whenever an ESX Server perform a reboot or rescan operation, the following procedure will be used (high level).
The ESX Server will
- analyze the SCSI bus and collects information for SCSI on any device seen
- Search for an existing partition table and the types of known partitions
- for each VMFS data store found it will read the signature
- checks if the signature matches with SCSI information
- matches, continue to accumulate the VMFS datastore
- does not, this VMFS datastore is not mounted automatically because it is identified as an "instant" feature
So you could access easily other ESX servers on this device when each ESX Server does not see the device with the same SCSI information.
As a best practice, each server ESX shoud see such device shared with the same LUN ID.
The modern paintings are capable of presenting storage devices with different LUN ID in an initiator (HBA) basis.
Another thing to keep in mind that ports in frontend used table use the same Port SCSI/flag settings, but these indicators may differ between vendors.
If these two basic requirements are met, you will be able to share the easy storage device between multiple ESX servers.
Kind regards
Ralf
Tags: VMware
Similar Questions
-
I have 10 devices all under the same identity of apple my partner can view all my contacts and call logs and vice versa.
The device can also see all internet pages use the devices, but mine isn't... How to get our contacts and call the newspapers private their own device and how can I get to keep an eye on web pages using my children? So how do for my phone, the master device / hand who is in control of access for all, because it has my info from apple id and card credit on all devices.
Stop sharing an ID first. They are not meant to be shared. Then set the sharing of family. Each individual should have their own code.
-
I've tried time and again to send this file. I've never synced before so I got that all set in place. Then ask master passwork safety device. So don't think that I had never set up an account and created the password. When you try to send email that I ask to link it goes to 'box' and I allow thunderbird to use use it. can he request master password and I type that in and it doesn't work. I have reset master pw for firefox and thunderbird and still can't make it work. I don't really know what I'm doing here so any help is greatly appreciated. Thank you!
If the error message is:
The message is "Please enter the master password for the software security device."then, it is possible that you have defined a master password in Thunderbird.
The password protects the passwords of account that Thunderbird remembered. You can reset the password. More information in this article.
Each account will have a password is the same one used to access the webmail account using a browser.
However, it is quite easy to find this password, if other people have access to your computer user account.A master password is used to protect against people to see these passwords if they get access to your computer user and Thunderbird account.
-
I have two versions of the same book on my iphone and ipad, which are not synchronized with the other. I want the same book on each device, so I can study on one or the other. I tried to remove the books on my phone, ipad & itunes and start again. It does not work. Help.
Hello david.hogan87,
Thanks for posting about what is happening. If I understand you correctly, you have a book you want on your iPhone and iPad, but neither is synchronizing correctly to have both.
Have you checked every device to confirm that the same identifier Apple is signed all three?
iPhone and iPad: head to settings > iTunes and App Store
iTunes: on a Mac, it's under account or installed depending on the version of iTunes store. On a PC, it is also under account, and if you don't see the menu bar, click on the triangle in the upper left corner to view the Bar Menu or CTRL + B on the keyboard.
If all 3 have the same signed Apple ID, post the version of iOS and iTunes for all three devices here, please.
Best regards.
-
Why did I not buy the same book over and over again for each device?
I bought a book for iPad on the iTunes app, then when I wanted to read the same book on my iPhone, I had to buy the same book again and then to read on my Mac at home I had to buy the same book again. I thought once I bought a book under my account that I could use it on all my devices, but apparently not the case. This is how it is supposed to work? Having to buy the same book for each device? If this is not the case, how it works and how do I get a refund for the book two, I bought extra?
When you buy an ibook that it will be free to download on your other devices/computers, as long as the book remains in the store, it's the same version of the book and you don't move the country (and you use the same account that you bought with).
How were you download on your Mac? Books you can redownload will appear in the purchase link under quick links on the right side of the homepage of iBookstore in iBooks. They should also show in the ibookstore with download instead of a price button.
You have been charged for the same thing that you initially copy bought (he didn't is not ore just one version of the book in the store?), and that you use the same account? Contact iTunes Support: http://reportaproblem.apple.com
-
Why books make me buy the same book over and over again to see on various devices?
I bought a book online and read on my iPad... I would also like to be able to read this book on my iPhone because it is easier at times... but books made me buy the same book again for now, double the cost for the same book I own, under the same account, just on a different device. This is how it works? What I must again and again get you the book even if I want to read on my different devices?
Hello there, Kenneth.
It seems that you are having problems getting purchased content on multiple iOS devices. The following Knowledge Base article provides a good explanation of how iBooks purchases should work:
In addition, the following article offers how to get these purchases on other devices:
Download your latest purchases
Before you can access a purchase, you must do the following:
- Make sure you have the latest versions of the software on your iPhone, iPad or iPod touch and your Mac.
- To log in with the Apple ID you used for the original purchase. Use the following steps to see what Apple ID allowing you to download something.
If you see a message that says: "this device is associated with an another Apple ID." "You cannot link this device to another Apple ID to [number] days," you may need to wait to download your purchases. Learn more about the devices associated. - Check if the purchases you are looking for are hidden. If your purchases are hidden, you can see them not even after following the steps below. Learn how to view purchases.
- See if content is available for the redownload. Previously purchased may not be items not available if they are no longer on the iTunes Store. Also, make sure that you are in a country whereyou can redownload points. If you have changed your Apple ID from one country to the other, you cannot download items you purchased in a previous country.
If you are a member of Apple's music, the items you've saved for use in offline mode do not appear in your purchased item. Learn more about the Apple's music.
If you use family sharing, you can download the content purchased by other members of your family group.
{...}
Re-download a book
You can re-download books in iBooks on iPhone, iPad, iPod touch, or Mac (using OS X Mavericks or later), or iTunes on a PC.
On an iPhone, iPad or iPod touch
- Open the iBooks app.
If you use iBooks 3.2 or earlier, click on the store. - TAP purchased from the lower navigation bar.
- Press the download icon next to the book you want to download. The book is downloaded on your device.
On a Mac
- Open IBooks.
- Click on iBooks Store.
- If prompted, sign in with your Apple and the password.
- Under quick links on the right side of the iBook Store, click purchase.
- Select No in my view purchased content library that is not on your computer.
- Scroll to find the book you want to download.
- Click on the download icon in the upper right corner of the item you want to download. Downloads of your book in your library.
- Open iTunes.
- Click Connect and enter your Apple ID and password.
- Click on your name and select purchased in the menu.
- In the upper right corner of the screen, click on books.
- Click on 'Not in my library' to the purchased display content that is not on your computer.
- Scroll down until you find the item you want to download.
- Click on the download icon in the upper right corner of the item you want to download. Downloads of your book in your library.
- Visit reportaproblem.apple.com in your browser.
- When you are prompted, enter the Apple ID and password used to start the purchase of the item, and then click Sign In.
- Find the item, you have a problem with, then click on report a problem next to her.
- The problem choose choose the problem you are experiencing.
- Follow the instructions on the screen. You may be asked to describe the problem in a text field.
- Click Submit and we will look at your problem.
-
I have House part for my iPhone and apple TV, but the iPhone libraries are not listed under computers on Apple TV. I don't see libraries for my Mac. I use the same identifier apple through the three devices. I have an iPhone 6 more working 9.0. The devices are all on the same home network running.
You can't share a library that is located on an iPhone, iPod or iPad with other devices. You can only share a library that is located on a Mac or a PC with other devices. On other devices, iPhone, iPod and iPad for example, you then activate home sharing to connect to the shared library.
-
Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?
I'm going to assume that you plan to have wireless devices.
Let's say that the Capsule is your "main" router If this is the case, then it must be located in the House, so that the distance between the time Capsule is the same for the outside walls of the House.
Then, on the 'left' side of the House, looking for an airport to midway between the Capsule and time of the outer wall of the House. Do the same thing the 'right' side of the House.
In other words, each of the two airports that "extend" the wireless signal are located at equal distance from the Capsule of time... but they are in opposite ends of the House.
If you intend to interconnect all the airports and Time Capsule using a permanent, Ethernet wired... which by far is the 'best' way to put in place a network in terms of performance and reliability... then you can locate one of the devices anywhere you want.
-
VISA devices with the same serial number and the vendor ID does not work (0xBFFF003A)
Hi all
I need to acquire the data of two meters of power YOKOGAWA with VISA driver (USB connection).
They work very well if used alone, but they do not work when are used toghether. In particular, when I plug in and turn on the two of them, NOR MAX shows me the following error message:
0XBFFF003A (VI_ERROR_INV_SETUP)
viFindRsrc return 0xBFFF003A (cannot start the operation because the installer is not valid (because of attributes defined in an inconsistent state).)
Please make sure that VISA is properly installed on this system.
Possible causes of this error:
1. more than one passport may be to attempt to claim the same resource. You can try to disable passport to understand which Passport is the cause of the error.
2 you have connected multiple no configured plug-and-play devices that have the same name of the resource. For example, the vendor ID and the serial number may be the same.In fact, according to MAX, both power meters have the same serial number and the same vendor ID; so, this seems to be the reason why they do not work together.
Can someone help me?
Thank you all
-
Lack of cRIO 9154 in the add targets and devices dialog box
Hello again all you lovers forum useful!
I have an existing LabVIEW project which includes a Hypervisor PXI real-time target. One of the devices that target is a chassis cRIO 9114. I now need to add a cRIO chassis additional 9154 so according to a conditional disable signal, I can modify my code to talk to the old chassis or the new chassis, which keeps my modular code across different hardware.
However, I write my code update on my regular computer which is not hooked to the target, so when I right click on the target of the hypervisor in my project and select new-> "targets and devices...". ", I can not select the" existing target or device "to be detected automatically. Instead, I click on the 'new target or device' to add just anyway, and I expand the CompactRIO there, and... no 9154. I have a bunch of other cRIO features (see screenshot), including the 9114, but no 9154.
I guessed that maybe my LabVIEW installation (2012 SP1) know not this chassis when it was released last year, so I tried to install the latest drivers from device with discs on developer LabVIEW 2013 that I just got, but he hung up during installation (the first time at 0% the second time at 27%, listed as "Validating install" for long, long before I was abandoned and cancelled). I restarted my computer, but no change to this problem.
Does anyone have any ideas as to why I can't choose a newer chassis to insert in my project without that it is actually attached to my computer? And I was too quick to renounce installation of the driver, not that I don't know if that would have solved the problem anyway? : PEI
Thanks for your help, as always,.
-Joe
Hello Joe,
The 9154 NOR is a RIO MXI-Express chassis that's why it should appear under the section of chassis MXIe-RIO.
For installation if you are concerned that it has not installed correctly, you can try run a repair on the NOR-RIO software and look at MAX to see if you have RIO 12.1 or 13.0.
-
I have two printers installed on my laptop, only appears. The Epson Workforce 600 is connected via a usb cable, the other is a wireless network. I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it is not the list when I go to print something. When I select "Find a printer", it gives me a list of computer icons.
Hello
Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
responsible for the proper functioning of the printer and their drivers provided.Good luck, you need to update or reinstall the latest driver.
Epson - Support us.
http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=YesEpson - support from Europe
http://www.Epson.co.UK/support=============================================
The main issue is probably the drivers, but these can help:
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsOpen the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterFind the manufacturer's Web site
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-websiteFind and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-driversI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
can not see Add targets and devices in the Project Explorer
Hello!
I think I have a strange question. I have the evaluation version of Labview 2010. I am trying to add my cRIO 9004 to a project. I'm just trying to follow the instructions in the getting started with manual cRIO. It is said, add crio to the project by project root right clicking and selecting NEW > ADD TARGETS AND DEVICES. The problem is I can't see the link to the NEW, but once I click that I see not a link under "add new target or device" appear, instead, I see the dialog box to open a NEW FILE LABVIEW appear. everywhere in distress forum/basic knowledge/support of shooting and get started articles have mentioned project root right click > select NEW > select Add a target or peripheral >, as if she IS supposed TO APPEAR STANDARD in all new projects! But I'm not! I do not understand what Miss me. The version of software that I have are below:
the cRio:
OR VISA 5.0
NEITHER RIO 3.0
RT LV 8.6and he allied himself with what I installed on my host.
I can communicate with the device of cRIO times using MAX as well as ping at the windows command prompt command.
Any help would be great!
Thank you!
Rajesh
After you have installed the evaluation version of LV 2010, you reinstall all of the other drivers, as for the cRIO?
-
Recently, I had a problem in that, plugged in my camera and also my phone options auto run does not come up as they used to do.
The cameras appear under my computer and in Device Manager but not under "Devices that you connect to your computer will be listed here" appear in the automatic game options and this area is totally blank.
I also checked the box "Use AutoPlay for all media and devices to" check in the auto play options. CD and USB sticks work very well.
I have Windows Vista. I read that Microsoft has sent a security update patch to stop the AutoRun works on Windows Vista. I tried to turn it around by using their dose, but it doesn't seem to help.
Any ideas anyone?
Hi - my problem is now solved.
Not long after reading the post above the laptop crashed and had to have a replacement hard drive.
I just got the laptop PC repair workshop, and although there are still a lot of updates to download, I plugged the camera the hurrah the AutoPlay menu appeared.
Obviously there is something fundamentally wrong with the laptop, but it will be interesting to see if AjutoPlay still works when all the Microsoft updates have been resettled.
Thanks a lot for your help.
-
I stupidly, twice - after using USB flash drives - just shot when he in fact without removing them properly. Now, they are listed at all times in my 'Device Manager' and in 'my computer '. I went into Device Manager and tried to uninstall them. It seemed to work but the next time I booted up Vista found drivers and now they are back in 'my computer' and Device Manager. This does not seem to be a problem, but I would like to get rid of them.
JoeHi JoeZZ,
Please see the following instructions on how to see the ghost devices:
http://support.Microsoft.com/kb/315539/en-us?p=1
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Multiple print devices of clouds in the same House and a single iPad.
One of my clients will soon two printerd clouds in the same House, one will be ePrint, probably other enabled AirPrint. Can anyone tell me please what options he'll do when he tries to print a document or a picture on his iPad? Printing device that a cloud will appear as a default printer? In addition, he will get a choice? He may choose which device to use only one (via an app I guess) on the iPad, and do not have the choice of two?
Any advice would be great.
Paul
If the printers and the Apple device has been implemented on the same network; It must list all of the printers that are capable of Airprint when you want to print something. For example, if you print a photo that you selected from the Gallery, after you press the action button () and select print, it will automatically be the last printer you used, stored as the printer to send the picture to. However, an arrow (>) to the right of this printer you can type. Once you press the arrow, it will offer you a list of all available printers on your network, you can choose to send the print job. I hope this helps.
On a PC
Finally, if you are connected the two devices with the same Apple ID and you need to report a problem with your purchases, this article will help you:
To report a problem or request assistance with a product purchased on the iTunes Store, App Store, Mac App Store, and iBooks Store:
If you use the sharing of family and you have a problem with a shared item, ask the family member who had initiated the purchase to report the problem by following the steps above.
Thank you for reaching out to the communities of Apple Support.
Kind regards.
Maybe you are looking for
-
Satellite P300 - mouse gel and ATIKMDAG error - resolved
If it helps someone... I had a problem with my Satellite P300... The mouse used to freeze from time to time for 3-4 seconds each time which was very annoying... and I used to occasionally get an error atikmdag.I searched the forums, but I couldn't fi
-
Hi, am new here... I have the laptop G62-244 and I wonder if my laptop is able to switch to the CPU as shown in the attachment. I do a few updates during which I find that it is difficult to buy a new laptop or desktop please a quick answer will do.
-
failed installation of KB2680317 and get error Code 646
I receive the error code 646 when trying to install the update of security for Microsoft Works 9 (KB2680317). I repeated it tried the FixIt tool and it does not solve the problem either. What is the next step to take so I can install this update?
-
How to convert MP4 to WMA files and MP3 files.
How to convert MP4 to WMA files and MP3 files.
-
I am a member of the CC for Photoshop and had LR5, purchased version.During the upgrade of LR5.7 to LR6, I installed by mistake LR CC (I thought it would be easy to uninstall once I had made my decision to buy LR6 or not).Then, I bought the full vers