Is there a delay before the information is available in the vault of the Audit?

Similar Questions

• 46YL863: change TV channels - delay before the new image appears

  Hope someone can advise me please on an "issue" that's appeared recently with my 46YL863 TV.
  I say 'problem' rather than problem in case it's something to do with my settings, which is the cause.

  When I change channels I notice that there is a delay of several seconds of the current image to the new. I narrowed down it to this happens only when you switch from a HD channel to a one SD card, or from a SD card on a HD.

  In these circumstances the screen will first black, then blue and after a couple more seconds the new image of the string will appear.
  Switch between HD or SD channels and the new image appears almost immediately.

  This happened before the last two days, so either a fault has developed or I changed a setting in some way.

  I tried other plugs of HDMI input and the situation is the same.
  Any suggestions please?

  Thank you.

  > I tried other plugs of HDMI input and the situation is the same.
  This means that you are using an external decoder which receives signals from TV?

• Why Windows 8 have a long delay before the launch of startup programs

  In Windows 8 there is a long enough period for the launch of the programs in the startup folder or in the register as startup items. Why is this? And how can I remove or reduce the delay? Please note that this is not a problem with too many programs trying to launch. There is that one program listed on startup with a new installation of Windows 8 and the system is running on an SSD. It's so clear and deliberate, time not only a slow system.

  Reading this thread, I just want to point that Microsoft quality replies here, it's horrible, beyond and Microsoft should be embarrassed to make them like that in public. I recommend delete them all and by publishing an adequate solution.

  Reminder: The OP says that he is a clean install. They moved just a program in the startup folder and they're asking why - this delay, indicating precisely is not a slow computer. The advice they get is:

  -Run the diagnostic system

  -Start in Safe Mode

  Hello? This is a clean install! Of course, none of this assistance.

  What actually happened is that there is, as the OP stated, before advisement in Windows 8 delay as all the start-up programs are executed.

  It can be flown in the key HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Serialize\Startupdelayinmsec in the registry (including the set to 0, then the programs are executed immediately).

  It is the response that should come from Microsoft. Everything else is a rubbish - model answers that everyone make Microsoft look green, as if they a) don't know their own product and b) don't care even clients who need assistance.

  The Bing team should also be ashamed of this site as their best result. Google does not work.

• Is there a delay in the signal when using Bluetooth on any iDevice and, in particular, on an iPad Pro?

  I am using Bluetooth involved in the use of music made a software with sounds of digital instruments using a musical keyboard hardware connected via the USB cable to Lightning to play sounds from the app on my iPad Pro.

  When I try to use a Bluetooth speaker source, there's a 1-2 second delay when I play a chord in the app and when the sound is played through the Bluetooth speaker.

  This delay IS NOT the case when I use just the iPad Pro speaker on when I am attaching some small travel speakers to the headphone jack of my iPad.

  Only when I try to use my Bluetooth speakers sounds better.

  I use a keyboard master Korg MicroKey Air uses the USB port play their own Korg music make its app module.

  Someone who makes music on an iPad with this problem at all?

  Is this a problem question Bluetooth and/or iOS?

  My iPad Pro isn't very strong using these apps do and travel speakers I use plugged into the headset jack music are a little better on the volume, but tend to deform when I try to increase the overall volume level.

  I intend to put this issue on the web forums for Korg, but want some answers from anyone who has been playing and recording music on their iPad using an external keyboard to play and record music in an app to do the music.

  Also, (and I intend to ask this in the GarageBand for iOS forums) can the iOS version of Garageband output sound on a Bluetooth speaker and quietly delay, too, that I can not get the iOS version of GarageBand to sound output via Bluetooth to a Bluetooth speaker.

  Hi, MichelPM

  According to the used speaker, he will always be * some * delay when using Bluetooth to stream audio from an iOS device (or practically any device BT also) through a Bluetooth speaker. I have a Bluetooth speakers system cheaper that I use with my iPad mini 4... I pretty much use it only to listen to sound. If I try and use it for Pinball iOS games I play, there is a delay of environ.5 second anywhere, I'm the speaker. Exactly same phenomenon occurs with the keyclicks when you type it on the iPad keyboard... 5 second delay & even with some applications of synthesizer iOS that I use (Animoog & Arturia iSEM). I think it's just the nature of the beast of Bluetooth.

  Higher quality speakers would be better, but I'm not spending more money to find out.

  If you want an immediate response with zero real audio keypress delay, I fear, the only way to do this is to use a wired speaker.

• The VM startup slow down, delay long before the guest operating system begins startup

  Evaluation of VMWare to set up the VM for the maintenance of the software. Set up a virtual machine, install Windows 7 SP1 32-bit, everything works well. Once started, the performance is excellent.

  The symptom is that when you start the virtual machine, either starting from cold boot or suspend, there is a significant delay before the power of VMware on / start screen is displayed. Once it appears, the operating system starts starting (or the recovery of wakefulness) quickly and performance is normal after that. During the start-up period, the whole system is insensitive, host and guest operating system.

  See the extract of newspaper below to 09:54:28.619 moment where the delay occurs followed by the entry concerning 09:55:11.625 time when start continues, a delay of 43 seconds during which nothing seems to happen and the system does not respond. After that, everything is fast.

  Any ideas or suggestions?

  More info...

  VMware Player version 6.0.1 build-1379776

  Host PC: Dell Optiplex, Intel Core2 Quad Q9650 3.00 GHz ABLE to

  Installed memory: 4.00 GB (3.25 GB usable)

  Boot disk C: Intel SSD, 180GB (where the VMware is installed)

  Data disk F: Seagate 1 TB (where the virtual machine)

  SE host: Windows 7 Professional 32-bit SP1

  Guest OS: Windows 7 Professional 32-bit SP1

  excerpt from VMware.log:

  2014 02-19 T 09: 54:28.619 - 05:00 | VMX | I120: VMMEM: initial booking: 1442MB (1024MB = MainMem)

  2014 02-19 T 09: 54:28.619 - 05:00 | VMX | I120: MemSched_PowerOn: minGuestSize ball 104857 (80% size required min 131072)

  2014 02-19 T 09: 54:28.619 - 05:00 | VMX | I120: MemSched: mem reserved (in MB) min max recommended 128 2493 2493

  2014 02-19 T 09: 54:28.619 - 05:00 | VMX | I120: PShare: activated 1 1 Adaptive scanRate [16, 400]

  2014 02-19 T 09: 54:28.619 - 05:00 | VMX | I120: MemSched: mem 5159 262144 np 35890 pg 590258 anon

  2014 02-19 T 09: 55:11.625 - 05:00 | VMX | I120: MemSched: numvm 1 locked pages: num 0 max 605661

  2014 02-19 T 09: 55:11.626 - 05:00 | VMX | I120: MemSched: locked Page limit: host 638514 config 638208 dynam 613853

  2014 02-19 T 09: 55:11.626 - 05:00 | VMX | I120: MemSched: minmempct 50 minalloc 0 admitted 1

  2014 02-19 T 09: 55:11.626 - 05:00 | VMX | W110: NUMA: application of automatic dimensioning VM ignored

  configuration (.vmx) VM file:

  . Encoding = "windows-1252".

  config.version = '8 '.

  virtualHW.version = "10".

  scsi0. Present = 'TRUE '.

  scsi0.virtualDev = "lsisas1068".

  SATA0. Present = 'TRUE '.

  memsize = "1024".

  MEM.hotadd = 'TRUE '.

  scsi0:0. Present = 'TRUE '.

  scsi0:0. FileName = "BCDEVVM.vmdk".

  SATA0:1.present = 'TRUE '.

  SATA0:1.filename = "E:".

  SATA0:1.DeviceType = "cdrom-raw"

  ethernet0. Present = 'TRUE '.

  ethernet0. ConnectionType = "bridged".

  ethernet0.virtualDev = "e1000".

  ethernet0.wakeOnPcktRcv = "FALSE".

  ethernet0. AddressType = 'generated '.

  USB. Present = 'TRUE '.

  EHCI. Present = 'TRUE '.

  ehci.pciSlotNumber = "35".

  Sound.Present = 'TRUE '.

  sound.virtualDev = 'hdaudio '.

  sound.fileName = 'speakers (SoundMAX Integrated D.

  Sound.AutoDetect = "FALSE".

  MKS. Enable3D = 'TRUE '.

  Serial0.present = 'TRUE '.

  Serial0.FileType = "thinprint".

  pciBridge0.present = 'TRUE '.

  pciBridge4.present = 'TRUE '.

  pciBridge4.virtualDev = "pcieRootPort"

  pciBridge4.functions = '8 '.

  pciBridge5.present = 'TRUE '.

  pciBridge5.virtualDev = "pcieRootPort"

  pciBridge5.functions = '8 '.

  pciBridge6.present = 'TRUE '.

  pciBridge6.virtualDev = "pcieRootPort"

  pciBridge6.functions = '8 '.

  pciBridge7.present = 'TRUE '.

  pciBridge7.virtualDev = "pcieRootPort"

  pciBridge7.functions = '8 '.

  vmci0. Present = 'TRUE '.

  hpet0. Present = 'TRUE '.

  usb.vbluetooth.startConnected = "FALSE".

  displayName = "BCDEVVM."

  guestOS = "windows7"

  NVRAM = "BCDEVVM.nvram."

  virtualHW.productCompatibility = "hosted".

  gui.exitOnCLIHLT = "FALSE".

  powerType.powerOff = 'soft '.

  powerType.powerOn = 'soft '.

  powerType.suspend = 'soft '.

  powerType.reset = 'soft '.

  extendedConfigFile = "BCDEVVM.vmxf".

  gui.lastPoweredViewMode = "full screen".

  UUID. BIOS = "56 4 d d2 32 bb c9 b7 bd 3 c d2 46 59 38 e3 e6 f2"

  UUID. Location = "56 4 d d2 32 bb c9 b7 bd 3 c d2 46 59 38 e3 e6 f2"

  Replay.Supported = "FALSE".

  Replay.FileName = «»

  scsi0:0. Redo = «»

  pciBridge0.pciSlotNumber = "17".

  pciBridge4.pciSlotNumber = "21".

  pciBridge5.pciSlotNumber = "22".

  pciBridge6.pciSlotNumber = "23".

  pciBridge7.pciSlotNumber = "24".

  scsi0.pciSlotNumber = "160".

  usb.pciSlotNumber = "32".

  ethernet0.pciSlotNumber = "33".

  sound.pciSlotNumber = "34".

  vmci0.pciSlotNumber = '36 '.

  SATA0.pciSlotNumber = "37".

  scsi0.sasWWID = "50 05 05 62 bb c9 b7 b0.

  ethernet0.generatedAddress = "00: 0C: 29:E6:38:E3.

  ethernet0.generatedAddressOffset = '0 '.

  vmci0.ID = "1508260067".

  vmotion.checkpointFBSize = "134217728.

  cleanShutdown = 'TRUE '.

  softPowerOff = 'TRUE '.

  USB:1.speed = '2 '.

  USB:1.present = 'TRUE '.

  USB:1.DeviceType = "hub".

  USB:1.port = "1".

  USB:1.parent = "-1".

  SATA0:1.AutoDetect = "FALSE".

  tools.syncTime = "FALSE".

  unity.wasCapable = "FALSE".

  tools.remindInstall = "FALSE".

  toolsInstallManager.updateCounter = '1 '.

  checkpoint.vmState = «»

  Monitor.virtual_mmu = "automatic".

  Monitor.virtual_exec = "automatic".

  USB:0. Present = 'TRUE '.

  USB:0. DeviceType = 'hidden '.

  USB:0.port = "0".

  USB:0.parent = "-1".

  USB. Generic.AutoConnect = "FALSE".

  serial1. Present = 'TRUE '.

  serial1. FileName = "COM1".

  floppy0. Present = "FALSE".

  Hello

  I know what you want to say as I've seen sometimes as well. But especially on older hardware or if there are problems with regard to particular resources. For example I saw this on an ESX host (yes I know product different) where there was a problem with the storage not enough providing IOPS / s.

  I saw also this on older versions of Linux (IIRC 7) workstation where the host had an Atom based CPU, there I updated to more RAM and a more recent version of the workstation and the problem disappeared.

  Then I also saw it on the 4/5 merger when my host operating system was out of memory and I tried to start another operating system to prompt anyway.

  I do not consider a normal behavior for the slow start and does not respond, it is an indication that the hypervisor is seeking some resources, but does not receive them fast enough.

  The reasons can be many. Indeed things like antivirus could be biting you if she tries to analyze all files (including virtual disks) at their opening.

  FWIW, I also understand the support response as would be expected if your host is a bit thin on the resources (for example, trying to start a VM 1 GB on a host Win7 with only 3.5 GB of RAM) and if the virtual machine runs OK after the initial startup delay, it's mostly just an annoyance.

  --

  Wil

• Keynote: delays of 14 seconds before the transitions during playback

  Hello

  I am putting together a Keynote presentation for an event. During the test/read the file, I get a huge 14 second delay before the slide transitions occur. The timer stops and then continues, as well as playback of the presentation, 14 seconds later. I saw the same presentation on iMac a colleague and the presentation is seamless - no delay (unless specified by me of course!). I use Keynote a lot, so I am confident that these delays are not of my own making.

  I use an iMac (retina 5K, 27 inches, end of 2015), with a processor 3.2 GHz Intel Core i5 and DDR3 8 GB 1867 MHz memory.

  Version of Keynote is 6.6.2

  The speech and the software system is completely up-to-date (I've updated everything in the hope that it could solve the problem).

  All proposals/solutions would be appreciated as I am quite confused.

  Thank you

  Gareth

  I'll answer my own question, just in case someone else has the same question; I forgot to mention that I use a dual display configuration - my second monitor is a Benq 24 "HD. I noticed that when I have the browser on the Benq and reading on the screen of the iMac, I'm late, but when I swap them so that the browser or on the iMac and playback of the presentation on the Benq, I don't get the problem.

  This seems to be a bug. Someone else this experience?

• Delay between the addition of peripheral support and to be visible?

  I added a device supported in the portal provider. When I disconnect and reconnect and check, it is there in the list of devices selected for this version. However, it does not appear in the list of devices if I check in the App World. Is there a delay between the addition of new devices and them being visible/allowed to download? How long is it? Or is there something else I need to do to add new devices supported for existing versions?

  I believe that the original deadline for metadata changes is nominally a day, while there may be further delays (up to a week?) so the App World client is caching information. I don't think that there is a good description of what exactly is subject either of these delays, but it's a good bet that you will see at least one. These are probably not involved if you view App World via a web browser.

• Delay before pre-loader

  Hello to you all,.
  
  Loading my sites are there is a delay before the pre-loader begins. At the moment the pre-loader appears it is usually 3/4 finished. I had a few comments such as "your site does not work. People don't see the charger immediately so they leave the site, assuming that it does not work. I looked in the forums to answer, but no luck. When I check the other sites before Chargers appear immediately.
  Here's the code.
  
  Framework 1
  
  bytes_loaded = Math.round (this.getBytesLoaded ());
  bytes_total = Math.round (this.getBytesTotal ());
  getPercent = bytes_loaded/bytes_total;
  this.loadBar._width = getPercent * 100;
  this.loadText = Math.round(getPercent*100) + '% ';
  If (bytes_loaded, bytes_total)) {}
  this.gotoAndPlay (3);
  }
  
  
  Frame 2
  
  this.gotoAndPlay (1);
  
  
  Anyone can shed some light on my problem.
  
  I have three sites that I created.
  
  My first flash site. www.ajansgeneral.com
  My new site for my film. www.simistanbul.com
  And a new site in progress. www.arccam.com www.arccam.com
  
  Thanks in advance!
  
  Happy coding
  
  W. J. Forsyth Jessy
  [email protected]

  You use components in your program? If so, this could be the
  the source of your problem. By default, the components are exported in frame 1 and
  the delay that you experience may be due to the load of the components.

  See 'Advanced Flash pre-loader' to www.gotoandlearn.com

• Safari breaks before the loading of pages

  I'm running Safari on OS 10.11.2 9.0.2.

  Blue loading bar of Safari is paused when I click on a link or are you trying to load a page. Sometimes, the page will load later. Sometimes, the page stops permanently.

  I'll refresh, refresh, refresh. Sometimes I'll reach an error page that the site cannot be loaded. Then refresh once more will make the page to load.

  I already uninstalled extensions and plug-ins. None of them seem to make a difference.

  This problem occurs on the home wi-fi and wi - fi work.

  Someone at - it ideas?

  DNS server irrelevant or invalid DNS configuration may cause long delay before the loading of webpages - Apple Support

• How to make a delay in the true case of a loop of the case, without affecting the wrong case?

  Hello

  I do a mini project, where I must, when the input is true, (10 s) delay before the release can be true, that's why I used a loop case and used the wait function in the case of true only, but it seems that it also affects the case of fake...
  Help, please!
  Thanks for your time

  remapears wrote:

  Yes I use it...

  Using what, exactly? (structure of the event? The race continues?, something else?)

  Try something like the joint.

  ("Continuous run" is a debugging feature, not a way to run a VI normally, so don't do it.)

• My facebook does not work on my laptop. theres a delay of 10 to 20 sec and it freezes.it works on my phone and kindle fine.and fair facebook is the only site that I have a problem with the help!

  My facebook is not loading properly it freezes and theres a delay.it of 10-20 sec worked very well for any other device.and that my laptop works properly on another site

  Hi Bobbi,

  The issue can be caused if the date and time is not properly defined.

  1. what browser do you use on your computer?

  2. you receive an error code or message?

  3. have you checked the issue with a different browser?

  First of all, let us try to launch the tool Internet and network by right clicking on the network in the notification area icon, click on solveand click Internet Connections. This utility can you ask questions or reset common settings as he tries to solve the problem. If running the tool network and Internet did not resolve this problem, follow the steps described in the following link and check if you are using Internet Explorer.

  Can't access some Web sites in Internet Explorer:

  http://support.Microsoft.com/kb/967897

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  If you need further assistance on this topic, let know us and we will be happy to help you.

• I have an iPad without any place to put a Sim Card.But I just updated my iPhone IOS 9.3 5 and before the full update there don't say "SIM necessary." Like I said my iPad has no where to put a SIM card on it what should I do?

  I have an iPad that has no place to put a SIM card on it.but I just updated my iPhone 5 in IOS 9.3, but before the end of the update there is a stage says "SIM card required" so I put a SIM card to this topic, but how do I update my iPad to IOS 9.3? Please help I'm really scared of what will happen!

  Only your iPhone needs a SIM card to do the upgrade, you will not be asked this question when you update your iPad unless it's an iPad GSM. I wouldn't do the update again as IOS 9.3 has serious bug (s) to fix first.

• DO YOU KNOW HOW TO CLEAN THE TASKBAR BEFORE THE ICONS FOR ITEMS FROM THERE?

  HELLO CLASSMATES.

  I WOULD LIKE TO KNOW HOW TO CLEAN THE TASKBAR BEFORE THE ICONS FOR ITEMS FROM THERE.

  PLEASE, I BEG YOU.

  Thank you.

  JOE

  I had the same problem.  Mine was up here an easy solution.   Right-click on the taskbar and display the properties.  Check hide them icons inactive and click Customize.  I had multiple entries in the items being passed, including volume control icon.  Remove the elements in the item passed I have no idea from whence they came.  I ran MicrosoftFixit50015.msi (a Windows package install).  Then re-checked the past again and all elements had disappeared or been corrected.  SEEMS this file or box on the PC has become corrupted.  I changed the control volume on always point display.  Also, I went to control panel and sounds and re-checked the volume icon to Place in the taskbar.   Rebooted the system and has worked for me so far.  Good luck!

• Windows Media Player 11, 20 seconds before the end of a track, and if there is another upcoming track, sound, jumps cracks, breaks upward.

  Original title: dissolution - log jam - sounds 20 seconds before WMP 11 goes from the current track to the other.

  Windows Media Player 11. 20 seconds before the end of a track, and if there is another track to come, the sound cracks, skips, breaks upward. A check in the Task Manager indicates that only when that happens all of a sudden the wscsvc service uses a lot of cpu. All of a sudden, the problem occurred two days ago. I had no explicit amy changed security - but standards updated Windows and McAfee took place.

  As expected Windows difficulty he finds no problem.

  Hi Janssons Frestelse,

  Good to know that you were able to resolve the issue and I thank you for updating the same.

  About the audio driver, you can try uninstalling and reinstalling the sound card and check.

  a. Click Start and type devmgmt.msc, and then Enter.

  b. expand sound, video and game controllers.

  c. right-click on the sound card and choose uninstall.

  d. restart the computer and check

  You can also check the manufacturer's website and try to download the latest verion of Windows Vista audio drivers and check.

  Check out the link:

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Concerning

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• is there a cancellation fee if you cancel before the end of the first year?

  is there a cancellation fee if you cancel before the end of the first year?

  Hello

  Now, you can cancel your subscription in your Adobe account page.

  Follow the workflow auto cancellation: cancel your Adobe Creative Cloud membership

  Hope that helps!

  Kind regards

  Sheena