Is there a driver compatible mac out there for printer Canon image class MF3240?

Similar Questions

• How can I get a driver for printer Canon I455 (my windows vista 32)

  How can I get a driver for printer Canon I455 (my windows vista 32)

  You can get this support from Canon... If they chose to take over the device in the given operating system.

  Looking at the Website of Canon's Support for this printer and select your operating system, they * sentence * support with your particular operating system.

  "This software is a module that extends the functionality of the printer driver for Canon inkjet printers. Your printer must be installed through Microsoft Update before you download and use this module. »

  So, basically install you by choosing to look on the Microsoft Update site when you try to install the driver.  It will download one Cannon gave to Microsoft after the release of Windows Vista.  Then, you restart and download the other file (on-site support) to give you more features.

• Canon Image class MF3110 and have drive but cannot install. All of the suggestions. It is said it is not a 64-bit.

  I received a Canon Image class MF3110 and have drive but could not be installed.  All of the suggestions.  It is said it is not a 64-bit.

  Download the drivers from here and give it a try.
  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/imageclass_series/imageclass_mf3110#DriversAndSoftware

  I hope this helps.

• Need driver for printer Canon BJC-210 for XP

  I have Windows XP, need a driver for a Canon BJC-210 printer.  It works very well, have the ink.  Driver got wiped out when entire disk had to be wiped clean to caused by a virus.

  Canon itself does not have one, and there are all kinds of scams out there to want not to download whatever it is not safe.
  This printer still works, ink lasts forever and able to get cartridges still easily.
  Do not want in the trash without no reason.

  The driver integrated in Windows XP does not work for you?

  What happens when you connect the printer to the computer?  Please provide error messages without paraphrase.

  Or try:

  • Connect the printer.
  • Cancel the Wizard "new hardware found" opens.
  • Click Start > printers and faxes > add printer
  • Select "local printer attached to this computer.
  • Uncheck "automatically detect and install my plug and play printer."
  • Select "Use the following port", and then select the appropriate port in the drop down list (see note below)
  • On the next screen, select Canon and BJC-210.
  • Complete the wizard.

  Note: Things can be difficult if the printer connects USB and there is not "virtual printer to USB port" in the drop-down list.  The simplest solution I've seen is to connect any generic USB printer.  After installation of Plug and Play, you can remove the printer but the USB virtual port will be there.

• Impossible to install the updated driver for printer canon

  Hello

  At every reboot (or what it seems) I am presented with an optional update titled:

  Canon - printer - Canon MX350 series FAX

  Download size: 18.3 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Optional

  Canon printers software update released in April, 2012"

  This made their appearance in these last weeks, and I've had the printer for more than 12 months (reference at the time of update).

  He has downloaded and moved on the agreement (or as it seems), yet a further reboot shows he has not, as it appears again in update option.

  Canon has already recommended to uninstall all the printer drivers for the printer, then relocation including that similar issues... a very long process.

  Is there a direct link (?) I don't have access to update? Assuming that it can fix the problem.

  Looking forward to any advice or request for clarification.

  concerning

  Lethal42

  There are a number of knowledge associated with, such as KB123456, as well as a link in the right pane for "Additional information" or "information". By clicking on one of them may lead you to a download available.

  If not, go here http://support.microsoft.com/search/?adv=1> and look for the number + 'download '.

  If this STILL does not work, try one of these (probably one of the two for 10/04/2012, even if neither one is 18.3 MB): http://catalog.update.microsoft.com/v7/site/Search.aspx?q=Canon%20MX350%20series%20FAX>

  Or (and this is what I would do), if everything works fine with the printer, the next time that he shows up, uncheck the box, right-click on it and select "Hide this update." The general rule is if the drivers are available at hardware manufacturers, then never install an update to Microsoft hardware (unless, of course, it's a MS product such as a mouse or a keyboard).

  SC Tom

• My mac says "Looking for printer.

  I bought D110a yesterday, and after a few soft not to install this printer on my Mac (OS X 10.6.4), I finally got to print... However, not always. By 'not always' I mean a point print at a time, through "reboot" the printer between the prints. If I do not "restart" the printer, the print queue displays "Looking for printer...» ». It will remain in this State indefinitely. When I try to use the HP utility, I get the following message: "HP ink jet is currently unavailable. Please check if it is connected and turned on, or try again later. »

  The printer is powered on and connected. I can access the built-in Web server (which displays the status "Ready"), and the "Print and Fax" menu shows the printer as "Idle" with the green light.

  Some useful facts (?):

  I installed this printer using the HP software provided.

  This printer is used on my wireless network (Linksys WRT610n router)

  I have another printer wireless that works without problem.

  Someone at - it no indication on this topic?

  Uninstall the HP software by using its own uinstaller (in Applications > Hewlett-Packard).

  Restart your Mac.

  Download and install this: http://support.apple.com/kb/DL907

  Download the latest version of the software for your printer from the "Support & drivers" link at the top of this page.

• Need driver for printer Canon BJC - 210 Windows 7

  No further questions.

  Windows 7 will drive a printer Canon BJC-210 (have the CD). It does not appear in the downloaded list. Also with windows XP (my deskatop).

  Hi stlarry,

  You will need to contact Canon, because they are responsiblie for Windows 7 drivers for their devices.

  http://www.USA.Canon.com/consumer/controller?Act=SupportIndexAct

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows 7 has no driver for printer Canon LBP3200

  I can't find a driver for my printer Canon LBP3200. I throw the printer and buy a new one?

  Did you check the Canon Website?

  http://www.Canon.co.UK/support/Consumer_Products/products/printers/Laser/Laser_Shot_LBP3200.aspx?type=download&page=1

• Old HP1510 works in Windows 8 & IE10 after the downloaded driver, but running out of PC printing options.

  Always have the CD disc that came with my HP1510 to download the printer driver.  However, my printer is so old that the driver on the disk is no longer compatible and not recognized by Windows 8 on my new laptop computer.

  For this reason, I was forced to download a printer driver on the HP site.

  It appeared to work after connecting my printer on my laptop, and the wizard cable, the driver for the downloaded HP1500 series and seemed to be successfully installed.

  However, I then found my extremely limited my laptop printing options.  I was able to print on a single page, or all, and that's about all.  Looking under the option 'more', my limited options were virtually repeated on a different display.

  But, it was when he came to try to print a program for a friend, that I am extremely frustrated, as on the screen, I could display 2 pages together, but could not - try as I might - print anything other than a tiny page of a sheet of paper, which could have use for a complete printing 8 sheets at this rate.  I was forced to pay to go on another computer in an Internet Café where I could print the pages of a copy of the file on the memory stick in "book view" & fit 4 tiny pages on a single sheet!, which is what I want to achieve from my laptop but can not.

  It is an old printer and before Windows 8 even thought, all features are simply not there. The main goal is just to make the same printer compatible with Windows 8, providing the basic features. The best you can expect is updated later, but there is no guarantee that you will never see these options in Windows 8.

• Pro9 Acrobat on Mac suddenly will not print pdf unless I put it on the Image to print.  Downloaded drivers for printer Canon updated and rebooted - same problem.  Problem appeared after update of Adobe, but not sure we - in the last 45 days.

  Acrobat 9 pro, suddenly will not print pdf except for the print image.  Begun in the last 45 days after the update from Adobe.  Have installed drivers for Canon updated and rebooted, but no change.

  If you look at system requirements for Acrobat 9 for Mac, you will see that it is only compatible with Mac OS X v. 10.4.11 or 10.5.

• Not able to find driver Win 7 (64 bit) for printer "hp psc 2410 photosmart all-in-one. pls help

  While I insert the printer USB cable to the laptop, it runs the Windows Live Update automatically and fails in the final task, the installation of the driver. It says "hp psc 2400 series - has failed.

  Then I removed the USB cable, removed the device of "devices and printers", reboot the laptop and then tried to load the driver manually. But in the window "install print driver", I could not able to find the driver for my printer ' hp psc 2410 photosmart all-in-one ' for the operating system of Windows 7 Professional (64 bit) under the "HP" manufactured.

  Can someone help me get this printer driver to use the Win 7 (64-bit) operating system? Thank you.

  Thank you, Sean. It has not solved the problem. Instead, I got to know that this will work with the 'HP Deskjet 6980 series' pilot and his summer work after I chose that one through the configuration of the local printer.

• 64-bit driver for printer Canon IP1600

  Back - anyone know where I can download a 64-bit for Canon IP1600 printer driver?

  If it is available, it will be on the Canon support site

  http://www.Canon.co.UK/support/Consumer_Products/products/printers/inkjet/PIXMA_iP_series/PIXMA_iP1600.aspx?type=download&language=en&OS=Windows%207%20%28x64%29

• Cannot find a driver for printer Canon LBP 800 for Windows 7

  Hello

  I use Windows 7, but I can't find a driver for Canon LBP 800 printer. Can you Halp me please?

  Hello Kromanjonac,

  Thank you for your message.  As seen HERE , Microsoft does not display a compatibility for your LBP 800, they show however, compatibility for the LBP 860.  Your best options will be either wait for Canon produce a Windows 7 pilot (who, if you call or post in the forums, they can tell you they are working or he does not intend to write a driver for this model), try the steps mentioned DeadManWalking86, or reach a new printer.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Firefox on Mac closes windows for printing or attachments

  not sure why this is happening now. When I try to print, firefox automatically closes the "pop-up". not exactly a window pop up, but printing system window. the same thing happens when I try to add attachments to an email. Firefox automatically closes the window system that would allow me to choose the files to download.

  I don't have this problem when using safari. but the problem has persisted on firefox, even if I had restarted the app and the macbook. and could not understand what went wrong (as I got this macbook for 5 years with no problems)?

  I'm using OS 10.5.8 (which is the last version available for this macbook). and firefox 12.0.

  found an answer by adding 'arch i386' before ordering. has managed to create a new profile. and seems that it solved the problem. Thank you very much for your help!

• Printer Canon i9100 Photo ink jet - is there a driver for Windows 7?

  I got the Canon i9100 for a long time. It is connected to my desktop which runs XP.  My new laptop runs on Windows 7 Home. I tried to add the Canon as a network to my new laptop computer printer and it did not find a driver for it. Everything that is available online is a complement to the folder that is supposed to change the existing driver, so all of the printer's features would be activated, but it assumes that the printer is already installed on the computer. I tried a different driver from the disk provided with the printer Canon, but he says there is no compatible driver disk for Windows 7.

  I connect the printer directly to the laptop just to see what would happen. It is installed. Now I have on my list of printers. However, after disconnected and tried to access the wireless network, it would not work... said he could not find a driver.
  There must be a solution here. Appreciate any help.

  Hello

  What is the exact error message that you have when you try to access the printer on the wireless network?

  I suggest you to follow the links and check out them.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Install a printer on a home network
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network