Is there a limitation of the list of selection display the number of lines in the report in the apex?

Similar Questions

• Is there a limitation in the size of the payload

  Hi all
  I would like to know if there is any limitation in the payload received in a BPEL/HTTP Post to 11.1.3 SOA process. Our customers say they can send big as payload of 5 MB. Will this be a problem on the side of SOA when the payload is received?
  Concerning
  SHY

  In SOA 10 g we have restrictions on the size of about 9 MB payload, but there is no constraint on the size of the payload in 11 g.

• Limitation of the APEX: sharing pages between several APEX applications

  I was hoping if someone with a little more experience architect APEX could comment on some of the limitations that I see and I have to make good decisions, working around the problem.
  
  Any suggestions are welcome.
  
  One of the limitations I've seen, it's how APEX handles applications and pages. Each application appears as an island, it has its own set of pages, the processes of connection, templates, CSS, JS, references etc.. Regarding the CSS and Javascript, you can be defined in a central location, but still, every new developed APEX application must be configured to make use of your 'standard '.
  
  The more traditional web solutions showing each as stand-alone web page and any web page can call/reference any other page and pass information to session between them.
  
  With APEX, however this doesn't seem to be the case.
  
  A solution would be to have a huge demand for APEX, where all the pages are the property of this unique application.
  
  Unfortunately, we use of APEX and EBS R11 (& R12) together; all APEX applications are started in the menus of the EBS. I had drawn a SSO solution between the two (without using oracle SSO). However, each APEX application is unique, as small modules instead of complete applications. In other words, we tend to use APEX as an alternative for Oracle Forms - each APEX application is a standalone program.
  
  I always wanted to be able to apply the same connection process and look and feel in the brand new APEX app we write.
  
  The way I went to this subject has been meticulously creating a 'model' APEX application. Embedded in the application of this model are all our shared CSS, JS and models that apply the site appearance. It also contains our custom library of signature unique code and debugging custom logger (think log4j but for APEX).
  
  So whenever a developer began work on a new APEX application, they start by cloning the model and automatically inherit all the functionally and website presentation.
  
  My concern is if this is really the best way to do it, or if I'm missing something?
  
  I am also concerned move forward when I wants to establish the change in appearance across all of our web applications that I need to touch each APEX application since. I'm trying to mitigate this by ensuring that almost all the programming logic is contained in packages of PL/SQL, CSS and Javascript only referenced and external application of the APEX. But this does not always with models, or with a logic that is rooted in the actual pages of the APEX etc.
  
  At least APEX allows you to easily enough copy pages between applications, but it does compare not just to have a single page shared between all applications of the APEX.
  
  Is there a better way to go about this?

  Hi attis.

  I think you can't really compare a module with an APEX application forms. I wouldn't say to create an APEX application every time when you have created a module of forms in the past.
  A forms module is just a few pages of an application to the APEX. Then you really should have more then a few pages in an APEX application. Certainly, a huge application is also not the way to go, but I group them for example by logical areas such as HR, logistics, order...

  As Sc0tt already mentioned, you must use the 'Subscribe' mechanism of shared components to make it easier to update all your applications with the model updates. But there is more, you should also share your user name and just have in one place and use the "simple APEX based SSO" that allows all applications within a workspace can share the same session. Simply set the 'Cookie' namesake in your authentication for all your applications and when you bind an application to another and include a valid session id you should not have to log in again and you can also set the session state in that other application.

  So here's what I'd do

  (1) creating a master application that contains
  (a) your theme and other components shared that you want to share
  (b) must be also some basic navigation lists to navigate between your applications...
  (c) create a sign with the name "Redirect to connect main app" and type accounts APEX (no matter) where you define the name of 'Cookie' to 'Cbx_missmost' and the URL of invalid session to the login page of your creation 'hand connection app '. For example: f? p = 9999:101: & SESSION.

  (2) create a model application which is a copy of the claim, but where change you the "subscription" of your models, authentication scheme and components shared in the main application. This will serve as your App developers if they want to create a new application.

  (3) create your 'hand connection app' (eg. app 9999 id) by
  ) a copy of your new model application
  (b) remove the inside authentication scheme (this is just made for this main connection app)
  (c) create a new type to use. But important: set the name of 'Cookie' to 'Cbx_missmost '. This will ensure that all applications have the same session cookie.
  (d) If you use APEX 4.1.1 you will automatically be redirected to the calling application after successful login.

  (4) start to create new applications by copying your 'model' application that contains all subscriptions.

  (5) If you run this application, it automatically redirects to your main connection application if the current session is not valid. This will avoid to have the same logic of authentication in your applications.

  (6) If you need to change your templates or shared components you just do in the "master" application and click on the "publish" button to push the changes for all your applications.

  But still, try to avoid many small applications, I think that make handling just unnecessarily complicated. It is an APEX application has a few hundred pages. For example, our APEX app Builder (app 4000) has more than 1260 pages.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• APEX variable for the number of lines of standard report?

  Hi people!

  Pagination to any report APEX, there is this "X-Y-Z" option, with Z showing the number of selected lines. I need this "Z".

  In my report, I have several filter options, and I would like the user to get feedback on the number of rows is selected as "X / Y", with there being a number calculated in advance and X number of rows returned. Now I was run all of the report a second time, by storing the count (*) result in a page item, but if there is a variable that already exist in the APEX (for paging) that would no doubt make things a little easier. I havn't found anything still looking, but more probably, one of the experts here knows how to access this value.

  Thanks and regards,

  Tobi

  You are supposed to be able to get the required information using the #TOTAL_ROWS # and #LAST_ROW_FETCHED # substitution string in the footer region.

  Note that for #TOTAL_ROWS # to work the report must use a paging system that calculates the total number of rows, for example "line ranges X y z (with pagination).

  However, the #FIRST_ROW_FETCHED # and #LAST_ROW_FETCHED # currently no change when I test it. These substitution strings are not compatible with the mechanism of updating now used partial page for pagination of reports, either this is a bug.

• JUnit Test Suite Limitations on the number of test classes can be included in the suite

  I run JUnit tests on my ADF Model picardalice in an application. I'm getting an instance of a request through the class of the device module and it helps in my test classes. It was created using all the Test Suite of Business components in JDeveloper 12.1.3.

  I'm running a JUnit test suite and it has several test classes in its operation. It runs successfully some and others fail. If I run those who fail by themselves, they are successful. If I remove the test classes in the suite they work (even those who have failed when the test classes were listed as a result of tests).

  Here is my code for the test method.

  @Test

  public void testAccess() {}

  See ViewObject = fixture1.getApplicationModule () .findViewObject ("ProjEstimateDtlVO");

  assertNotNull (view);

  }

  the ViewObject perspective comes return null for the execution of the test suite during all test classes are ran. It's successful return if I run one test case. It's successful return if I remove test classes in the following before running the suite.

  There are 70 + test classes in the suite. Is there a limitation on the number of test classes that must be executed in a test suite? Is it because it is repeatedly using an instance of the application module? Is this other thing?

  Everyone ran through this?

  Thank you.

  The problem in my case was because in one of the test cases I was releasing the module of the application in the method of disassembly. Since the application module was created once again, when I ran after tests and he ran this test scenario, anything after this would fail due to no application being created module.

  Thanks, Timo

• Limitation on the number of components adf on a jsp page?

  I am currently working on a page that includes a number of components of af: table with the underlying components of af: column for each table. The page also contains other components of the adf. My question is as stated above, is there a limitation on the number of adf components that are allowed on a page and if so what is it?
  
  I found that I had page errors can be solved by reducing the number of components. For example, deleting components of af: objectspacer I'm able to include components of af: column that caused the page to fail.
  
  Any information would be appreciated.
  
  Thank you.

  What version are you on?

  We faced a similar problem in 10g. The project does not compile after that jspx exceeds a certain size.

  It is due to the restriction of code_length java class file, it cannot be greater than 64 k.

  Check this thread for detailed explanation and workaround {: identifier of the thread = 361086}

  We have been working around the issue by breaking large page in multi-page and that refer to using the home page:

  
  
  

  Mitesh.

• Copy the APEX Application

  Hello people:

  Oracle Database 11 g Express Edition version 11.2

  Request Express 4.0.2.00.08

  I have a question for you.  I developed a simple application for a Department within my organisation:

  8 pages (no application process, process page 12)

  2 triggers

  2 sequences

  2 tables

  Other departments within my body as the application so they would like their own "copy".  Because of the type of information entered in the application, I can't have all the applications use 1 (of course I can but I need to create a somewhat complex authorisation schemes and I'd rather not go that route);

  
  

  Now, finally the question:

  
  

  Is there a way to the APEX to copy an application and recreate all the components (table, triggers, etc) from the new table names?  APEX makes it definitely easy to make a copy of an application, but I then go through the copy with a fine comb to change all references to the old names of table and replace it with new table names.

  
  

  Suggestions?  Comments?  I thank all members of this community of Oracle, because you communicate knowledge where it is lacking...  

  AquaNX4 wrote:

  People of day:

  Oracle Database 11 g Express Edition version 11.2

  Request Express 4.0.2.00.08

  I have a question for you.  I developed a simple application for a Department within my organisation:

  8 pages (no application process, process page 12)

  2 triggers

  2 sequences

  2 tables

  Other departments within my body as the application so they would like their own "copy".  Because of the type of information entered in the application, I can't have all the applications use 1 (of course I can but I need to create a somewhat complex authorisation schemes and I'd rather not go that route);

  Now, finally the question:

  Alas, I fear, that's the wrong question.

  Is there a way to the APEX to copy an application and recreate all the components (table, triggers, etc) from the new table names?  APEX makes it definitely easy to make a copy of an application, but I then go through the copy with a fine comb to change all references to the old names of table and replace it with new table names.

  Any suggestions?  Comments?  I appreciate everyone in this community of Oracle, as share you information where it is lacking...

  If it becomes a business tier application, it must be generated using the level technology company, such as the authorisation schemes, VPD to the multi-tenant data to be stored in the same tables and sturdy PL/SQL API for the maintenance of the data rather than the process Assistant APEX.

  Authorisation schemes are of no use in restricting access to the data, they are used to control access to the APEX application components. You can use authorization to control if a user sees a report from the region, but not the rows that are displayed in the report. To do this you must use VPD or views (note that separate sets of tables are not even considered an option).

  If all departments use, how long before that some top-level executive wants to have access to the data for each of them? How easy it will be to predict that, when the data is distributed on several tables?

  That said, SPV is not available in the XE, and the fact that you use it means that you are unlikely to be able to switch to Enterprise Edition to get it.

  My recommendation would be to rebuild the application using a set of tables, the views that restrict access to data by the Department and the generation of reports and PL/SQL with API packages manage data.

• Check where a function was used in the Apex 4.1.1

  Hello
  
  I wrote a defective function several months ago and have corrected. But not sure how many palaces that he is used to it because he is a big enough application and made some time back. Is there a mechanism within the APEX to check where a particular function is called (in proceesses, calculation, etc.)?
  
  Using Application Express 4.1.1.00.23
  
  See you soon,.

  Xarg,

  You should be able to use the application for this search. Simply go to the request of the manufacturer, change your request and put your name of the function in the search box in the upper right.

  -D.

• Yahoo AutoComplete component - can not increase the number of lines

  I'm trying to manipulate Yahoo autoComplete component, found in:
  http://developer.Yahoo.com/Flash/Astra-Flash/AutoComplete/examples.html
  
  My one thing I want to change is the number of lines, similar to the CS3 list item. By default, they display a number of lines of 5. I've tried to set rowCount = 10, but I see that 5 rows when the AutoComplete component displays items.
  
  Create an instance of AutoComplete
  var autoComplete:AutoComplete = new AutoComplete();
  
  give him data
  autoComplete.dataProvider = new DataProvider (myData);
  autoComplete.rowCount = 10;
  
  The drop-down menu that appears when you type in the AutoComplete field always displays only 5, not 10, objects. Does anyone have experience with this component, or feeling up to their example FLA and see how I need to be wrongly trying to adjust this property?
  
  Thanks for any help!

  I found a solution that worked for me.

  You can set the number of lines after the immediate creation of an instance of this component - it should be set when a user interacts with it. I found myself by setting the number of lines on a CHANGE listener. Don't l; t look like the logical place to put it, but it worked fine for my needs in the long run.

• Why is there a limited number of changes in the region for the dvd player

  Hello

  I live in the US but have a number of DVD in the United Kingdom - region 2, I occasionally like to play. When you place a region 2 DVD in the tray and launch, I am asked to change region 1 (used 99% of the time) to region 2. BUT there is a message saying that I only have a limited number of swaps in the region (and now I go out)

  Issues related to the:

  1. Why is there a limited number of area swaps?

  2. is there a way to get around this limitation? Or I will have to buy a DVD of the entire drive and watch my DVD region 2 on my TV?

  Thanks Ralph

  Why is there a limit to how many times you can change the DVD region setting?
  http://answers.Yahoo.com/question/index?QID=20090821083051AAAJkOK

  Windows 7 - bypass DVD region
  http://www.SevenForums.com/hardware-devices/17579-DVD-region-bypass.html

• Is there an API or the open Interface to convert price lists?

  Hello
  
  Is there an API or the open Interface to convert price lists?
  
  What are the additional configurations you need to enforce price lists?
  
  IM new Advnaced price and order management.
  
  Thank you and best regards,
  
  MPH

  Ignore the first API you mention who has a different goal. Personally, when I load the price lists I always use a loading rather than an API tool, but if I had a large number of large lists of price, I'd probably use this API, as seems to be better supported and documented by Oracle:

  (Note 435473.1 on MOS)
  [url https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=WHITE%20PAPER&id=435473.1] QPXVBLK: Pricing of bulk loader API including PS data: import of the details of implementation of price list and examples of Scripts block

  ... and there are many examples of scripts to help you here (Note 360060.1 on MOS)
  [url https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=SAMPLE%20CODE&id=360060.1] QPXVBLK: Price list in bulk Loader example for 11.5.10 Scripts free

  Kind regards
  Jon

  PS... and Yes, it works for 11.5 per 12.1.3 notes above

• Technical limitations of the server VSphere Essentials?

  I'm running the free VSphere hypervisor and the vSphere Client. It seems that there are a ton of limitations in the free version. So far, I stumbled upon:

  (1) failed to move a virtual machine from one storage location to another

  (2) unable to set "Promiscuous" mode on a network adapter

  The list of documents things which should be available in the client, but did not exist (for example, the tabs together or options). For me it will be continue to occur as I continue to implement my VM.

  
  I work in a small business environment, but still have needs of which is apparently offered in some of the other products (for example. VMotion, VCenter?). But I use only two virtual machines on a single server with 1 CPU and that's all that I will probably have need for a while. Is there a way that I can know what are the technical limitations? I don't want to buy the product and know that I am still limited.

  
  Thank you

  Greg

  A good comparison can be found here: http://www.thomas-krenn.com/en/wiki/VMware_vSphere_5_Editions_Overview

  And a nice stop on all linked to their information function names are found in this Google Doc: https://docs.google.com/spreadsheet/ccc?key=0AkDahcUh0bJkdElsVXdfeUNlN3d4dWRDdWRKTFNld2c&usp=sharing#gid=2

  At the end of the day, but, if you want to move a running virtual machine to a store of data to another, must be the 'norm'... any level Essentails come with it.

• CF9/Solr: limitation of the cfindex custom fields

  On CF9, using Solr, I am indexing a database query, but as Verity in the present and previous versions of the CF, there is a limitation on the number of custom fields that I can index.  I know that the limitation is with the cfindex tag Solr is able to index whatever fields are specified in the schema.xml file.

  A solution, I have in mind is to change the schema.xml file by adding all custom fields, I need and can index my content using Solr (post.jar?) instead of cfindex.  The cfsearch tag should return any new fields, not only the more personalized 4.  Has anyone tried to do this?  Should what command I call to index content directly through Solr?

  Alternatively, does anyone else have other suggestions for workaround?

  Thank you

  -Jose

  Depending on your needs, you may be too complicate things.  Simply because that offers only CUSTOM1... CUSTOM4 does not mean that you must only have a subkey by CUSTOMn attribute value.  You can put whatever you want in these values, for example: lists the subkeys; serialized structs or keys, etc.

  I agree that it is less than ideal of how Solr support has been implemented, but you will probably be able to get to work for you in this case.

  --

  Adam

• I bought the iphone 6 to find her icloud is locked. I tried to contact the owner, but I can't reach him. are there opportunities to take the step of activation? Thank you.

  I bought the iphone 6 to find her icloud is locked. I tried to contact the owner, but I can't reach him. are there opportunities to take the step of activation? Thank you.

  Hello

  You describe Activation Lock, which prevents the unauthorized use of the iPhone if it is lost or stolen.

  This can be disabled either by:

  • The former owner, grabbing their Apple ID and password of the device.
  • The previous owner, removing the iPhone in their list of devices to locate my iPhone via iCloud.com.

  In both cases, be sure to follow the instructions in the first article below.

  If you can not organize or either of these actions, then you will not be able to use the iPhone. There is no way around this security feature.

  More information and instructions:

  Turn off find my iPhone Activation Lock - Apple Support

  Find my iPhone Activation Lock - Apple Support

• Does anyone know if you are limited in the number of characters in the text field?

  I have the scrolling text of the distant rear side right up to the edge on the left front. I only get to halfway through the message of full text and letters are mixed at the any end. is there a limit on the number of characters I can use? Is there a setting a limitation I can increase?

  It seems to be. I figured it at approximately 16000 characters more or less (or even lower). (Estimated from the original character TextEdit limit as it seems to be this type of core service text text handling in movement and FCPX.)  I drew this conclusion during the development of a method to create a movement subtitles. It finally turned out that I had to cut the scripts into pieces 'chapter of size' to keep the character countdown. I never got to finish this tutorial and it has been quite some time now (and I can't not find my notes on the subject). It could be that the number of characters estimated is actually lower.

  There is no way to reset the limit.