best settings for shooting outdoors? Canon rebel eos t3i

Similar Questions

• What Flash Speedlite will work with my Canon Rebel EOS T3 1100 D?

  Hi, I'm new to the era of digital and older than 55 years.  My husband bought me a Canon Rebel EOS T3 1100 D in July.   (I fought the "technological" upgrade until my old film camera Canon quit on me).  I took pictures since 1966, so I'm not new to photograph, just for our technological advances.

  I would be very grateful if someone could help me with which Flash Speedlite will work with my Canon Rebel T3 D 1100 camera specific.

  I thank very you much for your time.

  I just got my 430EX II that I bought for use with my Rebel T2i. The main reason I bought the Canon product was... using Canon products, I have never had a failure or a bad experience of 60 years. I use the LL 430EX for a few days and I'm very happy with the results. Much, much better than the built-in flash. It is on sale now with free shipping of Fed X. It is hard to beat.

  Good luck with your new camera.

  Joe

• Best settings for alpha 58

  Hey I'm new user of digital SLR. I have alpha 58 with 18-55 lens, can someone please tell me what are the best settings for taking good photos outdoors

  Relating to the opening
  Use a mode and put the number of f to a larger number.

  http://d3studio.com.au/

  There are a few fundamental articles explaining the shutter, the opening and ISO what and how they work.

• Best settings for a wireless home network?

  I want to get help on a somewhat complicated setup: my connection in optical fiber gets into my house to a room in the basement. I have a last generation Asus router, which spreads the signal through various Ethernet cables. Wi - fi is disabled, because it wouldn't reach anywhere. Upstairs, I have a new airport time capsule, which creates the main WiFi network for the home. However, it dose not brought into the world. In the box where I want to extend the signal, I have a 5th generation AirPort Extreme (it does not support the alternative signal) connected to an Ethernet jack.

  Now my questions:

  1. my Time Capsule should be set to bridge mode, because it is connected to a router? Do not forget that I can't exclude this router because it brings the signal via a cable to other places.

  2. If the answer to the above is Yes, is there a way to establish a network of wi - fi comments?

  3. What are the best settings for the Airport Extreme, which is supposed to extend the signal? It is better to create a new wifi network, as it is connected via Ethernet, or should I put it to extend an existing wifi network?

  I hope that I have explained clearly, I'm only half of technology warned, and I am a bit lost...

  1. my Time Capsule should be set to bridge mode, because it is connected to a router? Do not forget that I can't exclude this router because it brings the signal via a cable to other places.

  Own configuration of Apple software, AirPort utility you should implement in Bridge Mode time Capsule to avoid a network error called Double NAT. But, ironically, if you call Apple support, they will tell you 'ignore' the Double NAT error and run time Capsule as another router on the network.

  Normally, you can avoid having a Double NAT error on the network, because that might lead to other problems, Apple boards so... If you call them... is controversial. Basically, it seems that Apple wants a router from Apple in charge of both the network possible... not another router.

  So, you will need to decide what advice to Apple you want to try.

  2. If the answer to the above is Yes, is there a way to establish a network of wi - fi comments?

  The feedback network option will not work correctly if the Capsule is configured in Bridge Mode.

  3. What are the best settings for the Airport Extreme, which is supposed to extend the signal? It is better to create a new wifi network, as it is connected via Ethernet, or should I put it to extend an existing wifi network?

  "Extend a wireless network" is used only when the airport connects to another router from Apple using a Wi - Fi connection. Since you will use Ethernet to connect, you would use "create a wireless network" setting.

  But, you won't have to worry about this if you are using Apple Configuration "Wizard" to set up the AirPort Extreme... it automatically applies the correct settings.

• Best settings for the analysis of revenues

  I just bought a HP Officejet 6600 A-I-O. I was looking for a device scan my boxes of documents, so I can unclutter my home office. I would also like to analyze the revenue. I considered the famous 'neat Scanner", but I hesitated to the price tag of $400.

  My question: what are the best settings for the HP scanning application when I'm scanning received? What is the difference between PDF and PDF searchable? IsTIFF a better choice than PDF? Use "Generalist" or something else? Recipes do not need large files high resolution, of course.

  Can someone point me to a guide that explains the different parameters available with the HP Scan application, please. Thank you!

  Hi Caesar3,

  In a regular PDF document, the text looks more like a picture of the text.  We can see it, but the file does not contain the words.

  In an indexed PDF, text is stored as text, so it can be searched.

  http://acrobatusers.com/tutorials/how-to-create-a-searchable-PDF-file

  When you scan receipts, 200 or 300 dpi should be fine.  If you plan to print the stored version receive 300 dpi would work well.

  I recommend PDF more TIFF.  TIFF files can store pages or multiple images in a single file, but access to additional pages is a bit awkward.  Generally, the file size is much smaller with PDF or TIFF.

  The site http://www.scantips.com/ is a good resource.  This is a Web site not HP, but it does not scan HP.

• best settings for kdl-46ve5 briteness, color etc level thank you tv

  What is the best settings for kdl-46ve5 Briteness, color etc level thank you tv

  Hello Tom,

  The default settings in the TV are usually the best settings for the normal display. However, the settings such as brightness, color etc. level must be adjusted based on the comfort of the user. It depends on the user and also the environment watch one. There is no basic rules for the parameters. The settings can be done on a basis of trial and error.

  If my post answered your question, please mark it as "acceptable Solution".

  Thank you for your message.

• Best settings for i7 desktop?

  I installed after effects CC 2014 on a computer with i74790k, Radeon 6850 and 8 GB of RAM.

  The program works well, but it's a little insensitive Windows 8.1, for example, opening and closing files take longer, also browsing the files, open the start menu, etc.

  What are the best settings for the decent edition and stability of office?

  Check your memory and multiprocessing settings. The RAM memory that is reserved for other applications should probably be higher.

  Lönnrot wrote:

  Strict minimum that?

  Minimum requirements according to Adobe:

  • 4 GB of RAM (8 GB recommended)

  According to almost everyone who uses it. The 4 GB is the minimum for it to run. However, you need more than 8 for this to work well. I would consider 16 to a minimum so that it works well, but considering how cheap and it is easy to upgrade RAM, I put more than that in your system if possible.

• Best settings for the export of EI

  Hello

  I wonder what that the best settings for export to EI for installation in first CS5.5. Previously I would scan from a band and would export .avi without loss of EI, but now I use the XDCAM EX 1080 50i on first sequence presets and I wonder if I need to change the parameters of the AE or just keep them as lossless?

  As always, thanks in advance!

  Keep it without loss.

• Best settings for the encoder to 720p@30fps (may - Ann or Jeff B.?)

  I have recommendations for use of Ann and b. Jeff for several months now using cs 4 encoding that can help get the high quality HD on a DVD-video.  Thank you!

  Now, I have a project using 720 p at 30 fps... Jeff online tutorial does not cover 720 p @ 30 fps.

  What are the best settings for my coding export?

  Thank you, Tom B.

  Process the images 720p30 in the same way that you process images 1080 p 30.  The difference with images of 60 p is because the size of the frame * and * the rate had to be adjusted.

  -Jeff

• What are the best settings for video export in first Pro Cs5.5 in HD MP4 format?

  What are the best settings for video export in first Pro Cs5.5 in HD MP4 format?

  Any help would be greatly appreciated! Thank you

  Under the H.264 are several presets for ipad.

  Experiment with those.

  http://www.Apple.com/iPad/specs/

  Looks like me 720 p is the largest export format.

• What are the best settings for Youtube videos using Camileo X 200

  What is the best video settings for the x 200 for youtube videos. 720 p-30 / 60-720 p / 1080 p-30.

  Thank you

  Hello

  In my opinion the 720 p-30 is good enough for Youtube.

• Best settings for iPhone and Photos for these results?

  Ok. So here's what I want to happen: I want the photos and videos that I take on my phone to download automatically on iCloud, so can I have pictures in my Macbook, but I don't want to not all of my Macbook is displayed on my iPhone. Can anyone suggest what are the best settings to achieve, if possible? Thank you.

  On the iPhone: settings > iCloud > Photos > download on my photo stream on. Note that only new photos after you have enabled this desire on upload.

  On the MacBook: Apple menu > System Preferences > iCloud > Photos - Options > my photo stream on.

  See My Photo Stream FAQ - Apple support for more information.

• What are the best settings for host when PPTX is looping continues

  With the help of Jorma is was able to realize my PPTX in continuous loop, and change the number of seconds a slide was shown see How to let a pptx presentation run on its own

  There is only one question left. What are the best settings. I find that to let him run, I need to press the sync button, but then participants may choose (inadvertently) to stop the presentation of the execution of the loop.

  What are the correct settings, so that a participant sees only the slides (no side bar etc) and the loop is running?

  Your response is much appreciated

  You should not need to press the Sync button. In the options menu Pod for the sharing, with the loaded PPT module, you'll see an option to view the presentation bar. Use that to get the part for the hosts and presenters in the room, then press the button play. The presentation will be now play in a mode loop for everyone in sync mode. You can also hide the PlayBar to keep other hosts and presenters to stop playback and Participants will never see the PlayBar or have the option to stop the presentation.

  In addition, if your door essentially on the sharing module (highlight a focus), you can use the 'P' button to start playing the presentation without revealing the PlayBar to just anyone. Adobe Connect 9 * accessibility features

• What are the best settings for the export of the comps before edditing in Premiere Pro

  Hi all!

  As the title says, who are the best settings to export compositions of EI on Pr.Pro and then edit them?

  Let me explain: I have two comps in AE (intro and outro) and want to export in Pr.Pro for with a fottage edditing I shot.

  When I give the size of the files are huge (30 sec = 7 GB).

  Which is the best method (and settings) I can export the intro and outro to a 'normal' size of the file and then put them in Pr.Pro without losing quality?

  [Comp settings: HDTV 1080 29.97 (1920 x 1080)]

  AE and Premiere Pro the two CS4

  If you're having trouble to play things in your Premiere Pro timeline, then find out editing in offline mode. In the edition offline, you work with a version of lower quality of an asset when editing and then replace with a version high quality when you are ready for the release.

• Best settings for AE comps entry in Pr.Pro Cs4

  Hi all!

  As the title says, who are the best settings to export compositions of EI on Pr.Pro and then edit them?

  Let me explain: I have two comps in AE (intro and outro) and want to export in Pr.Pro for with a fottage edditing I shot.

  When I give the size of the files are huge (30 sec = 7 GB).

  Which is the best method I can export the intro and outro to a 'normal' file size and then put them in Pr.Pro without losing quality?

  [Comp settings: HDTV 1080 29.97 (1920 x 1080)]

  AE and Premiere Pro the two CS4

  Please don't cross-post the same question in multiple forums. This makes things more difficult for people, answer questions, and it fragments the conversation. Consider that someone could lose a lot of time answering your question on a thread, not knowing that you get help already on another thread.

  Here is a link to the same question you have posted on the forum of After Effects (and my response):

  http://forums.Adobe.com/message/3227469